|
| 1 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced, complete all as specified and as directed. |
| 2 | M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 3 | M&L 75mm thick PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in plinth protection and similar works including finishing the surface of concrete topping even & fair, without using extra cement, complete all as specified and as directed. |
| 4 | M & L for vitrified ceramic tiles 10 mm thick light shade (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM (1:6), complete all as specified and as directed. |
| 5 | M & L for non skid coloured printed ceramic tile 8 to 10 mm thick (Square/rectangular/in joint less) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm,in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colur of tiles over 15 mm thick screed bed in CM (1:4), complete all as specified and as directed. |
| 6 | Dismantling floor hearth wall tilling including cement mortar bedding, removing serviceable tiles to store and rubbish of the permishes, complete all as specified and as directed. |
| 7 | M & L for glazed ceramic tiles in vertical surface 600x300x10 mm thick colour and design (as approved) in vertical surface and jointed in neat cement slurry and pointed in whiter or colour cement to match the colour of tiles over 15 mm thick cement plaster using CM (1:4), complete all as specified and as directed. |
| 8 | Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit, complete all as specified and as directed. |
| 9 | All as per above item here in before but n exc 1.5 Sqm each, complete all as specified and as directed. |
| 10 | S&F Powder coated Anodised aluminums frame for Door, sliding windows, ventilators and with one or more rebates including joining cleat and handles and other necessary fittings for fixing etc , complete all as specified and as directed. |
| 11 | S&F powder coated Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including 5mm thick sheet glass,5 mm alluminium panel incl necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc, complete all as specified and as directed. |
| 12 | Powder coated aluminium (minimum thickness of powder coating 50 micron) for partitions & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge, complete all as specified and as directed. |
| 13 | S&F aluminium alloy powder coated aluminium sliding windows three track with movable shutters (sliding on minium two PVC roller of best quality, for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and including 4 mm thick glass & stainless steel wire mesh fixed with neoprane rubber gasket with aluminium beading clips, frame made with aluminium section as appended below :-(a) Window Frame - 75mmx35mmx1.48mm thick(b) Top/Bottom rail and style/rail of shutter - 38mmx19mmx1.48mm thick and over(c) Aluminium beading /clips - 0.7mm thick(d) Stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium fire staples complete.(e) Aluminium fittings such aluminium suitable handle with auto interlocking closing.(f) Making good of wall surfaces to match with existing surfaces , complete all as specified and as directed. |
| 14 | S&F figured pin head type & glazing 4 mm thick with rubber gasket , in square not exc 0.5 sqm each pane, complete all as specified and as directed. |
| 15 | S&F 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane, complete all as specified and as directed. |
| 16 | S&F floor door stopper long 140 mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring , complete all as specified and as directed. |
| 17 | M&L in repair vanity wooden size (80x45x50)cm, minimum wt not less than 25 Kg. vitreous china wash basin bowl with wooden cabinet with two handle and two shelf with fancy mirror including fixing on wall and 15mm bore cast copper alloy CP piller tap fancy type and waste fitting brass. chromium plated with long shank and fly nuts of size 32mm dia including brass chromium plated bottle traps 32mm bore with inlet and outlet screwed for pipe and connections inci necessary packing union and cap, complete all as specified and as directed. |
| 18 | S & F in repairs Brass CP wall mixer /WHB Mixer 15 mm for mixing hot & cold water screwed down for iron pipeand fixed, complete all as specified and as directed. |
| 19 | S & F Corner glass Shelves (with brackets) for bath room, complete all as specified and as directed. |
| 20 | S&F Towel rail 600mm long of SS fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms), complete all as specified and as directed. |
| 21 | S&F in repairs bevelled edge mirror of size 600X450mm of selected quality glass mounted on 6mm thick AC building boards or on commercial plywood with aluminium beading alround and fixed to wooden plugs with CP brass screws, fixed in repairs, complete all as specified and as directed. |
| 22 | S&F pre-painted galvalume aluminium zinc coataing GI based profile steel sheet 0.50 mm thick of any colour having tnsile strength of 550 MPA as in roof covering/cladding to wall,fixed with self tappping screw incl dismantling, complete all as specified and as directed. |
| 23 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling, complete all as specified and as directed. |
| 24 | Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and as directed. |
| 25 | S & F 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on Ceiling, complete all as specified and as directed. |
| 26 | S & F 4 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with nails to timber frame work on wall, complete all as specified and as directed. |
| 27 | M&L 2nd class soft wood Plain fillets exc 13 Sq.cm , n exc 25 Sq.cm rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed. |
| 28 | M&L 2nd class soft wood Plain fillets exc 3 Sq.cm but n.exc 6 Sq cm , rectangular in section, clean sawn screwed with nails or brads, complete all as specified and as directed. |
| 29 | S&F Softwood 2nd class Clean sawn with butt joints Eaves boards 20 mm thick, complete all as specified and as directed. |
| 30 | M&L for complete removal of existing treatment on old wall surfaces & Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) new surfaces or old decorated surfacs, complete all as specified and as directed. |
| 31 | Dismantling timber scantling 40 sq cm and over in section in any position as in unframed work , complete all as specified and as directed. |
| 32 | M & L 2nd Class soft wood (Kail) as in scantling, clean swan timber fixed, complete all as specified and as directed |
| 33 | Demolition of brick work or stone/boulder masonry, built in cm incl all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and as directed. |
| 34 | M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in in CM 1:4, complete all as specified and as directed. |
| 35 | M & L For Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, complete all as specified and as directed. |
| 36 | Rounding to edges of Granite/stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and as directed. |
| 37 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 and finished even and smooth without using extra cement, complete all as specified and as directed. |
| 38 | S&F in repairs venetian blind coloured strip 75mm top 5mm thick powder coated aluminium rod ends at brackets are moulded type etc, complete all as specified and as directed. |
| 39 | S&F 16mm thick HDHMR waterproof MDF board for cabinets fixed with screws to timber frame work complete , complete all as specified and as directed. |
| 40 | S&F SS auto concealed hinges (Zero degree) fully overlay cabinet hinges) fixed , complete all as specified and as directed. |
| 41 | S&F 100 mm high-gloss finish handles , complete all as specified and as directed. |
| 42 | S&F 3mm thick Sheet glass with running wheel, two track for sliding glass shutters with knob, complete all as specified and as directed. |
| 43 | S&F in repairs curtain rails , anodised aluminium alloy with fixing brackets , stops, rollers etc, complete all as specified and as directed. |
| 44 | S&F for Aluminium anodised Brackets fixed in repair , complete all as specified and as directed. |
| 45 | S&F vitreous china wash down water closet (Single unit) including flushing cistern white/coloured match to the tiles fixed to floor, complete all as specified and as directed. |
| 46 | S&F in repair Health faucet mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. |
| 47 | S&F toilet paper holder premium quality, stainless steel or brass chromium plated, complete all as specified and as directed. |
| 48 | S&F pvc door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplied and fitted in openings as perspecification and drawing sown in SSR Part II, complete all as specified and as directed. |
| 49 | S/F factory made solid PVC moulded door shutter 28 to 30 mm thk (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channe having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement complete all as shown in drawing of relevant item in MES, schedule Part II, 2010, complete all as specified and as directed. |
| 50 | S&F 15mm bore Bib taps, cast copper alloy, with crutch or butterfly handle screwed down, screwed for iron or brass ferrule and fixed but fency type, complete all as specified and as directed. |
| 51 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 52 | S&F 15mm dia angle stop valve of CP any colour high pressure screwed for for iron pipe and fixed, complete all as specified and as directed. |
| 53 | MS Cold rolled Butt hinges medium weight 100 mm long, complete all as specified and as directed. |
| 54 | S&F 200mm long Anodised Aluminium tower bolt, complete all as specified and as directed. |
| 55 | M&L for GI tubing medium grade galvanised with all fittings complete to wall, ceilings or laid on roof top all as specified and directed for 15 mm bore including taking down, complete all as specified and as directed. |
| 56 | S&F in repairs vitreous China wash basin, Padestal Type white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and as directed. |
| 57 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 58 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 75 mm bore pipe, complete all as specified and as directed. |
| 59 | S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 60 | S&F for PVC (SWR) reducer with solvent cement 75/110 mm bore complete all as specified and as directed. |
| 61 | S&F for PVC (SWR) junction double ,(double T) equal or unequal,with access door bend with access door inluding jointing with solvent cement 75 mm bore, complete all as specified and as directed. |
| 62 | S&F for PVC (SWR) reducer with solvent cement 75/110 mm bore, complete all as specified and as directed. |
| 63 | S&F for PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors for 110 mm bore pipe, complete all as specified and as directed. |
| 64 | S&F for PVC (SWR) bend with access door inluding jointing with solvent cement 110 mm bore, complete all as specified and as directed. |
| 65 | M&L coloured chequered cement concrete tiles PU Coated 30cm x 30cm x 25mm thick (Premium quality), set jointed and pointed in neat cement slurry in floors with grey cement and pigment incl 15mm cement screed bed CM 1:4 , complete all as specified and as directed. |
| 66 | M&L for Walling of random rubble, uncoursed ,well bonded bedded and solidly hearted, built in cement mortar , complete all as specified and as directed. |
| 67 | M&L for PCC (1:2:4) type B-I (using 20 mm graded crushed stone aggregate ) as in coping incl necessary formwork ,weathering ,slightly rounded or chamfered angles, complete all as specified and as directed. |
| 68 | Rendering 15 mm thick in CM (1:4) on stone masonary surfaces or surfaces of fair faces of brickwork and finishing even and smooth without using extra cement , complete all as specified and as directed. |
| 69 | M&L for PCC (1:3:6) type C2 (using 40 mm graded crushed stone aggregate ) as in surface channel and drains and benching including finishing the top of the benching even and smooth using extra cement , complete all as specified and as directed. |
| 70 | Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc , complete all as specified and as directed. |
| 71 | Extra over stone walling for hammer dressing to face stones and dressing of face beds and joints, as specified of random rubble waling uncoursed or brought of to courses with maximum depression on face from straight edge held against the dressed surface not exceeding 40mm granite and trap stone, complete all as specified and as directed. |
| 72 | M& L for 100 mm thick PCC 1:3:6 type C-2 using 40 mm graded aggregate as in sub base.complete all as specified and as directed. |
| 73 | M&L in repair brass chromium plated wall mixer with hand shower @ 100mm round shape, complete all as specified and as directed. |
| 74 | Taking down carefully copper/aluminium point wiring (light, Fan, socket or power) complete, incl fittings such as switches, ceiling roses, pendants, regulators, sockets etc, removing materials to store for keeping in safe custody for reuse at site and making good disturbed surface of walls, floors etc. |
| 75 | M&L for point wiring in PVC casing caping/ conceiled with 1.5 Sqmm size multi stranded FRLS copper conductor cable 1.5 Sqm including clamps, screws guttier/plug etc PVC unsheathed cable into and including suitable board with sheet and PVC insulated FRLS cable of size 1.5 Sqmm as earth continuity conductor. |
| 76 | (a) One light/fan point/Exhaust fan point controlled by one 5 Amps switch one way. |
| 77 | (b) One 3 pin 5 Amp switch socket combination 5 Amps switch socket oulet on independent board. |
| 78 | (c) One 3 pin 3 Amp switch socket outlet on same board with accessories. |
| 79 | M&L for point wiring in PVC casing caping with 2.5 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC FRLS unsheathed cable into and including PVC board with Suitable sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor. |
| 80 | M&L for point wiring in PVC casing caping with 4 Sqmm size multi stranded FRLS copper conductor cable including clamps, screws guttier/plug etc PVC FRLS unsheathed cable into and including PVC board with Suitable sheet and PVC insulated FRLS cable of size 2.5 Sqmm as earth continuity conductor. |
| 81 | S&F Switch socket combination 2 in1, 3 pin,5 Amps and 15 Amp flush type universal, complete all as specified and as directed. |
| 82 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, , complete all as specified and as directed. |
| 83 | Supply and fixing LED luminaire 600 mm x 600 mm, (2' x 2') 40 watt Cool/Warm, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and as directed. |
| 84 | S&F in repairs Lamp Holder, PVC/ Polycarbonate type with back plate suitable for batten fitting, complete all as specified and as directed. |
| 85 | Supply and fix ceiling rose 3 terminal / PVC/ Polycarbonate, isolated body, complete all as specified and as directed. |
| 86 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 8 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, , complete all as specified and as directed. |
| 87 | S&F in repairs Double door metallic sheet metal enclosure for DB when MCBs to be used SPN 12 ways, 240 V with 200Amps rated bus bar complete fixed properly on in concealed position and to provide required sizes of flexible conduit at any open surfaces near DBs of cables/wires, , complete all as specified and as directed. |
| 88 | S&F in repairs MCB, SPN 63 Amps 240 Volts C curve, complete all as specified and as directed. |
| 89 | S&F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. |
| 90 | Supply and fix LED inverter Bulb 12 Watt, complete all as specified and as directed. |
| 91 | M & L sub main wiring with two run single core 6 Sqmm FRLS copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia PVC conduit/casing caping, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 10 Sqmm single core PVC FRLS insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion etc complete , complete all as specified and as directed.. Note: Two runs of 6 sqmm and one run of 6 sqmm cable and one run of casing capping shall be measured as one RM. |
| 92 | S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm, complete all as specified and as directed. |
| 93 | S&F in wall mounted fans 400mm swing 230 Volts, 50 Hz, AC, hight air thrust, high speed, over load thermal protection, full copper winding and silent operation connecting up including provision of cable from connector to fan, complete all as specified and as directed. |
| 94 | S & F led light fitting mirror type with hight output diffuser 2 feet ,10 watt 220 volt AC DECORATIVE TYPE WITH DRIVER holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 95 | M&L in repairs for Earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia at 150mm c/c in both ways as reinforcement, watering funnel, 20 mm dia light grade for protection of earth electrode, 20 mm dia GI pipe light grade for watering complete all as specified and as directed by Engineer in charge and tested on completion. Note : The rate is inclusive of necessary earth work as Excavation, RF and removal etc. |
| 96 | Supply and fix in repair electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc. |
| 97 | Note:- Schedule of credit Rs 97,332.00 will be deducted from total amount quoted while accepting the bid. Details of schedule of credit is given in tender documents. Please Enable Macros to View BoQ information |
