|
| 1 | Dismantling of plain or corrugated steel sheeting, any gauge and thickness including nainital or similar pattern roof coverings etc. complete all as specified and as directed. |
| 2 | S&F Pre-painted galvalume aluminum zinc coating GI based steel sheet (AZ-70) of approved profile of corrugation, 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws etc. complete all as specified and as directed by Engr-in-Charge. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based plain steel sheet (AZ-70) 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering, eaves board, ridges, hips,valley gutters, drip and straight flashing cladding to wall etc, fixed with self tapping screws etc. complete all as specified and as directed by Engr-in-Charge. |
| 4 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet etc. complete all as specified and as directed. |
| 5 | Dismantling timber scantlings 40 Sqcm and over in section, in any position (framed work) etc. complete all as specified and as directed. |
| 6 | Dismantling timber in fillets, rails, posts, rafters, purlins, etc. under 40 sq.cm in section fixed in any postion etc. complete all as specified and as directed. |
| 7 | S&F false ceiling with powder coated exposed GI grid suspension system (E-Grid T-2430 or equvalent load carrying capacity with mid span deflection not exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long, cross Tee 1200mm/600mm long and wall angle. The main runners to be placed @ 1200mm, the cross Tee 1200mm will be inserted in the pre cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmX600mm. Additional cross Tees of 600mm shall be placed perpendicular to the cross tee 1200mm long to finally form a grid of 600mmX600mm. Suspensor system (Grid) made out of GI sheet main Tee of size 23.5mmx38.50mmX0.36mm and cross Tee of size 23.5mmX23.5mmX0.36mm and angle size 19mmx19mmX0.36 mm. Grid of modular size 600mmX600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit with and including 4mm thick high pressure steam cured non asbestos fiber cement designer ceiling board (Density>1200Kg/Cum) of size 595mmX595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS 1530 part 3 & BS-476 Part 4, 5, 6, 7 & 8, complete all as per manufacturer's instruction etc. complete all as specified and as directed by Engr-in-Charge. (Make : Everest or equvalent as approved by GE) |
| 8 | S&F second class hardwood plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned joints etc. complete all as specified and as directed. Timber: Sal/Kalasiris/Chaplash/Hollock/Bijasal |
| 9 | Taking down shutters of any description exc. 1 sqm and n.exc. 2 sqm each and refixing in same opening after Resecuring or easing & adjusting etc. complete all as specified and as directed. |
| 10 | Dismantling wrought iron or mild steel work of any description not otherwise provided etc. complete all as specified and as directed. |
| 11 | S&F of joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc confirming to Fe 410-W (gde 250 quilty A) etc. complete all as specified and as directed. |
| 12 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises etc. complete all as specified and as directed. |
| 13 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc. 0.36 sqm, in floors etc laid over 20mm thick screed bed in cement mortar (1:6) and jointed in neat cement slurry and pointed in white or coloured cement to match etc. complete all as specified and as directed. |
| 14 | M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm, in vertical suraces like skirting, jamb etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) etc. complete all as specified and as directed. |
| 15 | M&L for Glazed ceramic tiles of size 350x 250x 7 mm/ 450X 350X 7mm thick in vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering on fair faces of brick work or concrete surfaces in CM (1:4) etc. complete all as specified and as directed. |
| 16 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar etc. complete all as specified and as directed. |
| 17 | M&L for Granite of 20mm thick of any type, table rubbed and polished in steps, jambs, pillars, window-cills, cooking platforms laid over 20mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc. complete all as specified and as directed. |
| 18 | Demolition of brick work or stone/boulder masonary buit in cement mortar including all quions ,arches, pillars etc. but excluding ashler facing dressed stone work and pre-cast concrete etc. complete all as specified and as directed. |
| 19 | M&L for old size bricks work with subclass 'B' bricks straight or curved on plan exc. 6m mean radius as in CM (1:4) etc. complete all as specified and as directed. |
| 20 | M&L brick work with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in CM (1:4) etc. complete all as specified and as directed. |
| 21 | Taking down cement plaster on brick or stone masonry surfaces of walls etc . including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 22 | M&L for 10 mm thick rendering in cement mortar (1:6) fair faces of Brick/stone/concrete wall surfaces and finished even and fair without using extra cement etc. complete all as specified and as directed. |
| 23 | M&L for 15 mm thick rendering ( in two coats of 10mm+5mm) in cement mortar (1:4) on other than fair faces of brick/stone/ concrete wall surface and finished even and fair mixed with integral water proofing compound @ 3% by weight of cement in 2nd coat or in the manner specified by the manufacturer and in the proportions indicated etc. complete all as specified and as directed. Note:-WPC will be measured and paid separately as supply only. |
| 24 | Supply only integral water proofing compond etc. complete all as specified and as directed. |
| 25 | M&L for Preparation of new plastered surfaces of any description over 10 cm width or girth applying two coats of oil bound distemper using mechnical spray gun/hand rollars over a coat of interior wall primer with and including a thin layer of wall care putty (Birla white or equivalent) etc. complete all as specified and as directed.Note :- Application of interior finishes shall be carried out with mechnical grinder, mechnical paint mixer and spray painting machine/Hand Rollars as per site requirment. |
| 26 | M&L for scrapping of existing treatment and applying two coats of thin layer of wall care putty (Birla white or equivalent) and then applying two coats of oil bound distemper over a coat of priming coat after preparation of wall surfaces etc. complete all as specified and as directed. |
| 27 | M&L for new plastered surfaces of any description on walls finishing walls with applying two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces etc. complete all as specified and as directed. |
| 28 | M&L for complete removal of the existing treatment on walls by scrapping and washing down with water including making good the surfaces and finishing walls with applying one coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces etc. complete all as specified and as directed. |
| 29 | Taking down shutters of any description n.exc 2.00 sqm each etc. complete all as specified and as directed. |
| 30 | M&L for 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type fixed with screws to timber frame work, etc. complete all as specified and as directed. |
| 31 | M&L for 0.9mm thick decorative laminate type 1 of surface finish, colour and pattern as approved, with approved adhesive as per manufacturer's instructions etc. complete all as specified and as directed. |
| 32 | M&L for Plain fillets exc. 13 sq.cm but n.exc. 25 sq.cm in square, rectangular or triangular in section, bull nosed, splayed, chamfered or rounded on one edge or face clean sawn, secured with nails or brads etc. complete all as specified and as directed. |
| 33 | S&F 1st Class hard wood external teak wood lipping, 6 mm thick on exposed surface of prelaminated particle board fixed with nails etc. complete all as specified and as directed. |
| 34 | S&F 30mm width mild steel continuous piano hinges bright finish or electro galvanised etc. complete all as specified and as directed. |
| 35 | S&F 100 mm size stainless steel butt hinges, medium weight etc. complete all as specified and as directed. |
| 36 | S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts etc. complete all as specified and as directed. |
| 37 | S&F 150mm long Brass extruded handles, fabricated type polished etc. complete all as specified and as directed. |
| 38 | S&F 300mm long brass sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts etc. complete all as specified and as directed. |
| 39 | S&F 100 mm size haps and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screw etc. complete all as specified and as directed. |
| 40 | Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc. complete all as specified and as directed. |
| 41 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane etc. complete all as specified and as directed. |
| 42 | S&F in repair Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples etc. complete all as specified and as directed. |
| 43 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for etc. complete all as specified and as directed. |
| 44 | M&L for 50 mm thick PCC (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in plinth protection/ path laid slope of 1 in 12 and finshing cement concrete surface even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering of exposed edges or etc. complete all as specified and as directed. |
| 45 | M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in surface channels, drains including all necessary form work etc. complete all as specified and as directed. |
| 46 | S&F in repairs 25mm dia stainless steel curtain rod (curtain rails), including decorattive knobs and hooks etc. complete all as specified and as directed by Engr-in-Charge. |
| 47 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide etc. complete all as specified and as directed. |
| 48 | M&L for preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint etc. complete all as specified and as directed. |
| 49 | M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint etc. complete all as specified and as directed. |
| 50 | Taking down unserviceable copper/aluminium point wiring of any description including all fittings and fixtures (switch , socket, switch socket combination, lamp holder, ceiling rose,light fittings and regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes etc. complete all as specified and as directed. |
| 51 | Dismantling and taking down unserviceable main switches, DBs any type / size and making good disturbed surfaces to match with the existing finishes etc. complete all as specified and as directed by Engr-in-Charge. |
| 52 | M&L for concealed point wiring with two single core 1.5 sqmm PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with multi stranded copper conductor with proper colour coding drawn through and including PVC conduit (medium grade) with all fittings and accessories ISI marked concealed in wall/fixed to roof,ceiling etc incl provision of 1.5 sqmm PVC insulated, multistranded, unsheathed, copper conductor cable, FRLSH, ISI marked as earth continuity conductor (green in colour) connected to common earth dolly incl fixing of modular metal flush boxes of appropriate size & thickness fixed flush to wall with modular back plate and top cover for mounting switch, sockets etc including cutting chases for conduits & sinkings for modular boxes & making good the disturbed surfaces, matching to the existing one etc for one light/Bell/Exhaust fan point controlled by one, one way switch 5/6 Amps etc. complete all as specified and as directed. |
| 53 | Description all as per item No 52.00 above but for one 3 point 5/6 Amps switch socket outlet point controlled by one switch on the same board etc. complete all as specified and as directed. |
| 54 | Description all as per item No 52.00 above but for one 3 pin 5/6 Amps switch socket outlet point controlled by one switch on independent boad etc. complete all as specified and as directed. |
| 55 | Description all as per item No 52.00 above but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly. incl modular white cover plate etc. complete all as specified and as directed. |
| 56 | S&F Modular switch of 1 way 6 A, 1 module 230 Volts,50Hz, ISI marked etc. complete all as specified and as directed. |
| 57 | S&F Modular switch of 1 way 16 A, 1 module 230 Volts,50Hz, ISI marked etc. complete all as specified and as directed. |
| 58 | S&F Modular Bell push of 6A 1 module 230 Volts, 50Hz, ISI marked etc. complete all as specified and as directed. |
| 59 | S&F Bell, Ding Dong electric AC 230 Volts of single pole etc. complete all as specified and as directed. |
| 60 | S&F Socket, 6A-2/3 pin combined of 2 module 230 Volts, 50Hz, ISI marked etc. complete all as specified and as directed. |
| 61 | S&F Socket, 6A/16A-2/3 pin combined of 2 module 230 Volts, 50Hz, ISI marked etc. complete all as specified and as directed. |
| 62 | S&F ceiling rose of surface bakelite 65X50mm three terminal etc. complete all as specified and as directed. |
| 63 | S&F Modular lamp holder insulated body with back plate for batten fitting etc. complete all as specified and as directed. |
| 64 | S&F LED retro fit lamp B-22 holder base with poly carbonate body and aluminium heat sink of 10W etc. complete all as specified and as directed by Engr-in-Charge. |
| 65 | S&F LED batten surface/wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 20W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) etc. complete all as specified and as directed. |
| 66 | S&F LED batten surface/wall mounted with specially designed powder coated aluminium housing, high optically efficient polycarbonate diffuser, in built electronic driver duly wired up to terminal block, power consumption 10W, system efficiency of ≥100 lumens/W, Ingress protection IP 20, colour rendering index CRI>80, driver efficiency>85%, power factor > 0.90, THD <20% as per IEC 61000-3-2, colour temp -6500K, surge protection 2.5 KV, 50,000 burning hrs (min) etc. complete all as specified and as directed. |
| 67 | S&F LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection etc. complete all as specified and as directed. |
| 68 | S&F LED light fitting 1x9W/1X10W IP66 & IK09 integral LED Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size including taking down old unserviceable fitting etc. complete all as specified and as directed. |
| 69 | S&F wall mounting, brushed nickel finish fixture with acrylic diffuser suitable with 9W LED lamp B22 base etc. complete all as specified and as directed by Engr-in-Charge. |
| 70 | S&F LED 6W Down lighting in polycarbonate with high brightness light fitting, diffuser including etc. complete all as specified and as directed by Engr-in-Charge. Make of Havells or equivalent model of Philips/ Crompton |
| 71 | S&F in repairs LED bed side lamp 3W LED Black 3000K etc. complete all as specified and as directed by Engr-in-Charge. Cat Part No 48042 of Philips or equivalent in Havells/Crompton. |
| 72 | S&F in repairs LED Picture light, 6W etc. complete all as specified and as directed by Engr-in-Charge. Make: Philips, Cat Part No 30973 or equivalent in Havells/Crompton. |
| 73 | M&L for Telephone wire including drawing into 25 mm PVC conduit (medium grade) concealed in wall/roof including taking down old unservicible sub main wiring etc. complete all as specified and as directed by Engr-in-Charge. |
| 74 | S&F in repairs LED 2X2 PANEL 36 W 3000/6500 K Ultra modern recess mounting luminaire with high performance LEDs, suitable for mounting with Armstrong /Grid ceiling etc. complete all as specified and as directed. Make Havells or Equivalent of Crompton/Philips. |
| 75 | M&L for sub main wiring along with earth wire of size two run of 6 sq mm + one run of 6 Sq mm earth wire single core PVC insulated cable with stranded copper conductor FRLSH including drawing into 25 mm PVC conduit concealed in wall/roof including taking down of old unservicible sub main wiring etc. complete all as specified and as directed. (Note Three run of 6 Sqmm including one run of 25 mm of size PVC casing and caping shall be measured as one unit length). |
| 76 | S&F TPN DB with suitable for TPN MCB incomer, double door (IP-43), 4 Ways, built- in 100 Amps busbar for neutral link complete suitable for 415 Volts, AC, 50 Hz, flushed in wall or fixed on surface etc. complete all as specified and as directed. |
| 77 | S&F Sheet metal enclouser Double door for MCB DB,s Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 4 way 240 Volts AC, concealed in wall etc. complete all as specified and as directed. |
| 78 | S&F Sheet metal enclouser Double door for MCB DB's Phosphatised Powder Painted with bus bar 100 Amps rated Single pole and neutral linkof 12way 240 Volts AC, concealed in wall etc. complete all as specified and as directed. |
| 79 | S&F 415V, 10KA 'C' curve miniature circuit breaker (MCB) of FP 40 Amps. capacity in the MCB DB complete with connection testing and commissioning etc. complete all as specified and as directed by Engr-in-Charge. |
| 80 | S&F in repairs 240V, 10KA 'C' curve miniature circuit breaker (MCB) of DP 20 AMP capacity in the MCB DB complete with connection testing and commissioning etc. complete all as specified and as directed by Engr-in-Charge. |
| 81 | S&F Amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SP 6 To 32 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning etc. complete all as specified and as directed. |
| 82 | S&F metal plug socket single pole and nuetral encloser with two pin earth plug with 01 No MCB SP 20 Amp, C series etc. complete all as specified and as directed. |
| 83 | Taking down exhaust fan with any size with, blades, and louvers and refixing the same after cleanig including and connecting up with all fixing arrangements by provision of cable from ceiling rose etc. complete all as specified and as directed. |
| 84 | Taking down Electric geyser and keep in safe custody and refixing the same etc. complete all as specified and as directed by Engr-in-Charge. |
| 85 | M&L for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm buried directly in ground ( earth pit not less than 2.25 m deep bellow ground level ) with top edge of the plate not less than 1.5 m bellow normal ground level, connected to galvanized earth lead wire 4 mm dia. by means of galvanized iron or steel bolts , nuts , check nuts and washers, and connected to equipments as directed , including funnel with GI med grade watering pipe 20 mm bore , wire mesh , charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode , with concrete pit in PCC (1:3:6) type C-1 (using 20mm graded aggregate), 50 mm thick pre-cast RCC (1:2:4) (using 20mm graded aggregate) type B-1 cover slab reinforced with 8 mm dia deformed bar 15 cm C/C and suitable handle of 10 mm dia round bar, GI medium grade pipe for earth lead protection including necessary excavation earth work in soft/loose soil and disposal of spoil to a distance n.exc. 50m and necessary testing complete all as shown on electrical plate No. 3 of MES SSR Part-I including taking down existing earthing etc. complete all as specified and as directed. |
| 86 | M&L for taking out old unserviceable UG cable of any size/ type from trenches/ wall/ roof etc. for necessary repair/ replacement/ re-laying works etc. complete all as specified and as directed by Engr-in-Charge.Note : Excavation and earth work will be measured and paid separately. |
| 87 | M&L for XLPE cable insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade) with stranded aluminium conductor of size 10 Sqmm 4 Core, including glands, lugs, nut, bolts, washers as required at site, testing etc. complete all as specified and as directed. |
| 88 | Excavation in trenches for foundation in soft/ loose soil not exc. 1.5 metre wide and n.exc. 1.50m deep for LT under ground cable/pole foundation and getting out including forming bottom surface to required level or slope, etc. complete all as specified and as directed. |
| 89 | Returning, filling including spreading, leveling, watering and well ramming in layer n.exc 25cm each layer etc. complete all as specified and as directed. |
| 90 | Removing excavated material n.exc 50M and depositing where directed at a level n.exc 1.5 metre above the starting point etc. complete all as specified and as directed. |
| 91 | M&L for Sand cushioning to underground cables provided with a layer of sand 8cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches etc. complete all as specified and as directed. |
| 92 | M&L for Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick including takingdown old brick etc. complete all as specified and as directed. |
| 93 | S&F in repairs Steel pipe glavanized light grade of 40 mm dia laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth strip including clamps with nut, bolts and washers etc. complete all as specified and as directed. |
| 94 | S&F in repalcement of Cone shaped LED Bollard light fittings, 8 watt, IP 65, diffuser at the upper portion, 0.5 mtr long including fixing arrangemets and eletric connection etc. complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat Part No- CONEBLS8WLED830PSYMTOPC (warm white) or equivalant from CG/ Philips/ Bajaj Please Enable Macros to View BoQ information |
| 95 | S&F in repalcement of Cone shaped LED Bollard light fittings, 8 watt, IP 65, diffuser at the upper portion, 0.5 mtr long including fixing arrangemets and eletric connection etc. complete all as specified and as directed by Engr-in-Charge. Make- Havells Cat Part No- CONEBLS8WLED830PSYMTOPC (warm white) or equivalant from CG/ Philips/ Bajaj Please Enable Macros to View BoQ information |
