|
| 1 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.In cement mortar (DSR:15.7.4) |
| 2 | Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement: 4 coarse sand) DSR 6.4.1 |
| 3 | 12 mm cement plaster of mix:1:6 (1 cement : 6 fine sand) DSR 13.1.2 |
| 4 | Providing and applying 1mm thick wall putty (Birla/K.K. etc) with smooth surface complete in all respect to the entire satisfaction of the Engineer-in-charge (NS) |
| 5 | Finishing walls with Acrylic Smooth exterior paint of required shade : —New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm). DSR 13.46.1 |
| 6 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 35 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Kiln seasoned and chemically treated hollock wood (DSR 9.27.1.1.2) |
| 7 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 300x16 mm DSR No. 9.96.1 |
| 8 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete in all respecte to the entire satisfaction of the Engineer-In-Charge. |
| 9 | 150 x10mm (DSR:9.97.4) |
| 10 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete in all respecte to the entire satisfaction of the Engineer-In-Charge |
| 11 | 125mm (DSR:9.100.1) |
| 12 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.Single rubber stopper (DSR 9.101.1) |
| 13 | Steel work welded in built up section / framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer usin’g structural steel etc. as required. In grating, frames, guard bar, railing, brackets, gates and similar works. (DSR 10.25.2) |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work (DSR 13.99.1) |
| 15 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm (DSR 16.70.1) Please Enable Macros to View BoQ information |
