|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: COMMANDER WORKS ENGINEER BAREILLY Name of Work: SPECIAL REPAIRS/ REPLACEMENT OF ASBESTOS ROOF SHEET AND CONNECTED WORKS OF BLDG NO T88 GUEST ROOM, P-34 DEF CIV ACCN, P-48 & P-52 CARIAPPA LINES UNDER GE (WEST) BAREILLY Contract No : CWE / BLY / GE(W) /45 OF 2026-27 Bidder Name : SCHEDULE A(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description Item Code / Make Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) not exceeding 1.5 sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. |
| 3 | Supply and fix powder coated anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc.complete all as specified. |
| 4 | S&F Powder coated anodised Aluminium door shutters pull and push type (with or without aluminium sash bars) including necessary jointing cleat, glazing clip, rubber packing anodized aluminium beading, screws, etc and panel inserts of 5mm thick tinted glass/ prelaminated particle board (Novapan) panel in each door and making good of wall surface to match existing surface complete all as specified and directed, comprising of (aluminium anodised section and aluminium anodised fitting as following :-a) Rails (Top & Bottom) of section- 114.30 x 44.45 x 1.49 mm thickb) Lock rail of section- 83.50 x 44.45 x 1.70 mm thickc) Stiles of section- 85 X 44.45mm X 1.40mm thickincluding 2 handles, hinges etc |
| 5 | S&F powder coated aluminium sliding windows frame with movable shutter sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (v) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 6 | Supply and fix Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed. |
| 7 | M&L for preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 8 | S&F in repairs 15 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 9 | M&L Vitrified Ceramic tiles double charged light shade 8-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 and dismantling of existing floor, tiling removing rubbish off the premises complete all as specfied and directed. |
| 10 | All as per serial item No 8 but as in vertical surfaces including rendering 10 mm thick in cement mortar 1:4, dismantling of existing wall, tiling and removing rubbish off the premises as in backing layer complete all as specified and directed. |
| 11 | M&L Vitrified Ceramic tiles double charged light shade 8-10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neatcement slurry and pointed in white or coloured cement to match and including 15 mm thick screed bed in CM 1:6 and dismantling of existing floor, tiling removing rubbish off the premises complete all as specfied and directed. |
| 12 | All as per serial item No 10 but as in vertical surfaces including rendering 10 mm thick in cement mortar 1:4, dismantling of existing wall, tiling and removing rubbish off the premises as in backing layer complete all as specified and directed. |
| 13 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 14 | S&F in repair vitreous China Urinal half stall type white complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement mortar 1:3 including PTMT spreader, PTMT waste coupling, PVC waste pipe complete all as specified and directed. |
| 15 | S&F 15 mm bore dia CP wall mixer with connection, L bend for shower arrangement complete all as spd and directed |
| 16 | S&F centre hole basin mixture 15 mm dia chromium plated complete all as specified and directed. |
| 17 | S&F in repairs Vitreous China water closet Padestal pattern white, including mild steel chromium plated or aluminised hinging device seat cover size 630x450 mm size white with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor all as specified and directed. |
| 18 | S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified |
| 19 | S&F fancy type glass corner 300mm radius of 10mm thick toughned glass with railing fixed with fancy type screws complete all as specified and directed. |
| 20 | S&F in repairs 20 mm bore gate valve , cast copper alloy complete all as specified and directed. |
| 21 | S&F Ball valves 15mm dia high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15 m m - 2 1 0 g m s ) complete all as specified and directed. |
| 22 | Taking down Chowkats or frames with shutters (Without taking off shutters from the frames) exceeding 1.5 sqm but not exceeding 4.0 Sqm each including iron mongries, hold fast etc and including making good disturbed portions of walls in Cm 1:4 complete all as specified and directed. |
| 23 | S&F 125mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 24 | S&F 105mmx60mmx1.25mm thick pressed steel, frames for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 using 20 mm graded stone aggregate, necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed. |
| 25 | M&L for Plain Cement Concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) as in holdfast, coping and similar work etc complete all as specified and directed. |
| 26 | S&F for 35 mm thick factory made wooden flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . |
| 27 | S&F for 35mm thick factory made glazed and skeleton door shutters open rebated of second class hard wood rail and styles(Hollock), prepared to receive glass/gauge etc without sash bars, edges of framing plain cham-fered or rounded, mitred and rebated sash bars, any numbers The size of rails & style as specified in SSR Part-I (2009) section 8 and as per IS-1003(Part-I) kiln seasoned as per IS-1141 and chemically pressure treated as per IS-401 complete all as specified and directed.Note :- Glass/gauge shall be measured and paid for separately. |
| 28 | S&F in repair steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wire gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit (II) rate for filling PCC in frame deemed to be included in quoted rates (iii) MS grill,glass and wire mesh shall be measured and paid seperatly under relevant item of schedule |
| 29 | S&F in repair Steel ventilator with top hung shutters including box type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or welded as per TD complete all as specified and directed. |
| 30 | Supply and fix Solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube 47x47mm (19 gauge) all as specified and directed. |
| 31 | M&L for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of one side prelam PVC sheet and other side plain pvc sheet. Panelling of prelam colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 32 | S&F 100 mm long medium weight, cold rolled Stainless steel Butt hinges with screws complete all as specified and directed. |
| 33 | S&F 200mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed. |
| 34 | S&F 150 mm long Aluminium alloy handles, cast type, anodised complete all as specified and directed. |
| 35 | S&F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 36 | S&F Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire staples complete all as specified and directed. |
| 37 | S&F in Sheet glass 3.0 mm thick, ordinary quality and glazing with oil putty or wooden beads n exceeding 0.5 Sqm in each pane glazed with putty or fixed with beads complete all as specified and directed. |
| 38 | S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolts complete all as specified and directed. |
| 39 | S&F mild steel pressed handle, oval type, stove enamelled black size of handle 125mm ISI marked . |
| 40 | Supply and fix mild steel, sliding door bolts, bolt type, stove enamelled black, with bright bolt not less than 12 mm dia with and minimum of 6 bolts and nuts, four on bolt plate and two on staple plate length of bolt 300 mm complete all as specified and directed. |
| 41 | S&F mild steel 300 mm long ordinary rat rail rodpattern helical door springs, incl roller and roller plate complete all as specified and directed. |
| 42 | Demolition of unreinforced concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 43 | M&L for 100 mm thick cement concrete, type C 2, 1:3:6 (using 40 mm graded stone aggregate) as in sub base of floor complete all as specified and directed. |
| 44 | M&L for 25 mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth using extra cement complete all as specified and directed. |
| 45 | M&L for 75 mm thick cement concrete 1:3:6, type C1, with using 20 mm graded stone aggregate in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler 1:3 by weight complete all as specified and directed. |
| 46 | M&L for non-skid coloured ceramic tiles 8 to 10 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 (400x400) sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 and dismantling of existing floor, tiling removing rubbish off the premises scomplete all as specfied and directed. |
| 47 | All as per serial item No 45 but as in vertical surfaces including rendering 10 mm thick in cement mortar 1:4, dismantling of existing wall, tiling and removing rubbish off the premises as in backing layer complete all as specified and directed. |
| 48 | M&L for Glazed ceramic tiles in vertical surface 450X 350X 7mm thickset and jointed in neat cement slurry and pointed in white or colour cement to match including rendering 10 mm thick in cement mortar 1:4 including dismantling of existing wall tiling and removing rubbish off the premisescomplete all as specified and directed. |
| 49 | Demolition of brick work built in cement mortar complete all as specified and directed. |
| 50 | M & L for brick work with Fly ash brick old size straight or curved on plan exc 6 m mean radius built in CM (1:6) complete all as specified and directed. |
| 51 | Removing Cement mortar or cement lime mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish complete all as specified and directed. |
| 52 | All as per item no 50 above but expect bricks complete all as specified and directed. |
| 53 | Taking down cement plaster from brick wall/ concrete surface including racking out joints hacking for key and scrubbing down with water complete all as specified and directed. |
| 54 | M & L rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 55 | M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement. |
| 56 | Material and labour for preparation of new plastered or pointed surface of walls/pillars/cornices by brooming down or by sand papering or by any other mean and after preparing the surfaces applying two coats of cement base paint as approved tint/colour over a coat of 1 mm thick wall care putty complete all as specified. |
| 57 | M&L for applying two coats of oil bound distempering on newly plastered wall surfcae with airless electric sprayers over a coat of primer applied using airless electric sprayers over a coat of 1 mm thick wall care putty complete all as specified and directed. (Note-APPLICATION TO BE DONE THROUGH AUTHORISED APPLICATOR OF MANUFACTURER.) |
| 58 | Material and labour for preparation of new steel and iron surfaces of any description not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed. |
| 59 | M&L for preparation of new wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 60 | S&F Rotational moulded polyethylene water storage tanks(tripple layer and white in colour) of 500 Litre capacity as per SSR P-I (cylinderical vertical with closed top) hoisted and fixed in position including dismantling of existing old water tank complete all as specified and directed. |
| 61 | S&F 20 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 20mm tubes complete all as specified and directed. |
| 62 | S&F 15 mm bore Galvanized Steel tubes, medium grade for flush pipes, water supply pipes etc., fixed to walls and ceilings or laid in floors including taking up or down of 15mm tubes complete all as specified and directed. |
| 63 | S&F 15 mm bore Bib taps fancy type, chromium plated castcopper alloy withcrutch or butterflyhandle, screweddown, screwed foriron pipe or forbrass ferrule andfixed complete all as specified and directed. |
| 64 | S&F fancy type chromium plated brass angle valve/Concealed stop cock type suitable for 15mm bore pipe complete all as specified and directed. |
| 65 | S&F stainless steel plate rack of overall size 31\\" x 30\\" x 10\\" made with 0.63 mm stainless steel thick sheet complete all as specified and as direcetd. |
| 66 | S&F sinks with drainage boardmade of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; includingbedding in cement mortar to dwarfwall or including fixing cantileverbrackets and connecting union topipe overall size 915mm x 460mmowl size 410mm x 330mm x160mmcomplete all as specified and directed. |
| 67 | S&F CP Brass Tubular towel rail, 20mm dia, D type, 60cm long between flanges with both side holders |
| 68 | Supply and fix 600mm x 450 mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood on PVC frame complete all as specified and directed. |
| 69 | S&F 15 mm dia brass chromium plated , pillar taps fancy type, cast copper alloy with capstan heads screwed down high pressure screwed for iron pipe with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts or as specified or as directed. |
| 70 | S&F in repairs Vitreous China Squatting pan of Orissa pattern, size 580x440 mm size white with integral foot rest with Cast Iron `P' or `S' trap, front or back inlet and including connection to trap and to flushing pipe, anti-syphonage pipe etc., including trap set in and including lime concrete bedding complete including making good to floor (excluding flushing cistern and flush pipe)all as specified and directed. |
| 71 | S&F in repairs 10 litres PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including 32mm PVC pipe for low level cistern L type, brackets fixed on wall complete all as specified and directed. |
| 72 | S&F Vitreous China Ware Wash hand basin pedestal pattern size 550x400mm in repairs including cutting for and pinning ends of brackets including PTMT waste coupling and PVC waste pipe 32 mm dia and PVC connection 450mm long with PTMT nuts and fixed on a pair of MS cantilever bracket of appropriate size complete all as specified and directed. |
| 73 | S&F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union |
| 74 | S&F 110 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls including Taking down eaves gutters and rainwater pipes (any size or pattern AC/PVC/CI), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 75 | S&F 75 mm bore PVC (SWR) Soil, waste and vent, rain water pipes, drain pipe single socketed in any length with rubber ring joints fixed on walls including Taking down eaves gutters and rainwater pipes (any size or pattern AC/PVC/CI), including all fittings, heads, shoes, bends, swan-necks, etc., complete all as specified and directed. |
| 76 | S&F in repair PVC Nahani trap with grating 110mm x 75mm or as per site requirement complete all as specified and directed |
| 77 | S&F 110 mm bore PVC (SWR) bends , elbow, any radius complete all as specified and directed. |
| 78 | S&F 75 mm bore PVC (SWR) bends,elbow, any radius complete all as specified and directed. |
| 79 | S&F 110 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed. |
| 80 | S&F 75 mm bore PVC (SWR) junction single,(Single T) equal or unequal complete all as specified and directed. |
| 81 | Demolition of Reinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and direcetd. |
| 82 | Form work to soffits of suspended slabs/chajja/ flat/beam/soffit surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed. |
| 83 | M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 84 | S&F TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified. |
| 85 | Excavation in trenches n.exc 1.5m deep & n.exc 1.5m wide and n. exc 10 sqm on plan, in soft/loose soil and getting out complete all as specified & directed. |
| 86 | M&L for RCC Foundations, including rafts, footings, foundationbeams; plinth beams; bases for columns, etc.; basement slabs, under-reamed pilesand mass concrete all as specified and directed. |
| 87 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in columns, pillars, piers, post and structs etc all as specified and directed. |
| 88 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as Beams, cantilevers, bressummers, lintels complete all as specified and directed. |
| 89 | M&L for RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in Chajjas/Slab etc complete all as specified and directed. |
| 90 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc |
| 91 | M&L for 18-20 mm thick Granite work (table rubbed and polished) in steps, jambs, pillars, window-cills, door cills cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with and like in cement mortar (1:4) including form work , pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as spd as directed.(shade and coloured of granite will be approved by Engr-in-charge) |
| 92 | Dismantling timber scantlings 40 sq. cm and over in section, in any position complete all as specified and directed. |
| 93 | S&F in repairs 4mm thick E-Board tiles for insulation and acoustic purpose of size 600x 600mm fixed with and including anodised GI prepainted snap grid with 25x25x1.5 mm thick Tee section and 38x25x2 mm thick angle with hanging/supporting arrangements as in false ceiling at bottom at spacing 60 cm centre to centre including necessary GI cleats and 4mm dia GI wire as suspender fixed to ceiling not exceeding 1.20 mtr centre both ways with dash fastners complete and making good disturbed surfaces including taking down old ceiling complete all as specified and directed. |
| 94 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 95 | S&F prepainted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws Complete all as spd and directed. |
| 96 | S&F prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / clading to wall, fixed with self tapping screws as specified. Complete all as spd and directed. |
| 97 | S&F Steel work in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow circular section , plate or flat sections ) including distance pieces, cleats, nut bolts etc complete all as specified and directed. |
| 98 | S&F 25 mm dia SS fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed. |
| 99 | Surface excavation in soft /loose soil n. exc (not exceeding) 30 cm deep and averaging 15 cm deep and getting out complete all as specified |
| 100 | Removing surplus excavated materials (SOIL) to distance not exceeding 50 m and depositing where directed at a level n. exc 1.50 m above the starting point complete all asspecified and directed. |
| 101 | M&L for Machine pressed Precast cement coloured concrete, factory made coloured glazed interlocking paver block any shape and size conforming to IS 15658 -2006 of 60mm thickness, M-35 Grade, pattern and colour with grey cement & pigment including 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 102 | Excavation in Post holes (or similar holes ) in any type of soil, each not exc 0.5 cum , getting out , returning filling and ramming carts not exc 25cm , watering and removing surplus soil to a distance not exc 50 mtr and making good surface complete |
| 103 | M&L for PCC 1:3:6 type C1 (using 20 mm graded stone aggregate) as in foundation bed of manhole, drains and steel post embeded etc all as specified and directed. |
| 104 | Supply & Fixing only chain link fencing including line wires any mesh, size and type to any type of standards, rails, straining bolt, etc including provision of binding wire complete all as spd and directed. only chain link MS galvanised fencing any size or type complete all as spd and directed. |
| 105 | M&L for mild steel bolts. purpose made.with hexagonal orsquare head one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut. complete all as specified and directed. |
| 106 | S&F mild steel work as in flat tie for post and struts in fencing including cutting tops to shape as directed ,drilling holes ,notching wire etc, flat iron including drilling holes , confirming to Fe 410-O or Fe -310-O complete all as specified and directed. |
| 107 | S&F rolled mild steel as in angle, post without connecting plate etc, cut to length ordinary Gde Fe-410.0 or Fe -310.0 complete all as specified and directed. |
| 108 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified and directed. |
| 109 | Taking down old MCB DBs/ main switches off of any description of an size |
| 110 | Taking down submain wiring including all accessories complete all as specified and directed. |
| 111 | Material and labour for point wiring with single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI marked not less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered with modular plate and cover of suitable size with new brass screws for mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:-(a) One light / fan/ exhaust fan point controlled by one switch. |
| 112 | (b) One 5 pin 5 Amp switch socket out let point on an independent board complete all as specified and directed. |
| 113 | (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board complete all as specified and directed. |
| 114 | All as per item 111 here in before but for one 15 Amp 6 Pin switch socket out let independent with 2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistranded incl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductor complete all as specified and directed. |
| 115 | S&F Modular switch one way 10 A, 1 Module complete all as specified and directed. |
| 116 | S&F Modular switch one way 16 A, 1 Module complete all as specified and directed. |
| 117 | S&F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 118 | S&F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed. |
| 119 | S&F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed. |
| 120 | S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed |
| 121 | M&L for replacement of lamp holder, PVC / Poly carbonate, insulated body modular type with back plate batten/angle type for batten fittings complete all as specified and directed. |
| 122 | S&F in replacement of LED batten 10 Watt 2 feet LED batten with aluminium housing with all accessories prewired suitable for wall/ surface mounting complete all as specified and as directed. |
| 123 | S&F in replacement of LED batten 20 Watt LED batten with aluminium housing with all accessories prewired suitable for wall/ surface mounting complete all as specified and as directed. |
| 124 | S&F in replacement LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. |
| 125 | Supply and Fix in replacementr Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. for fixing in wall of suitable size and length of bracket not less than 1.2 mtr complete all as specified and directed. |
| 126 | M&L for sub main wiring with two single core 6.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 127 | M&L for sub main wiring with two single core 10.0 Sqmm (FRLS) copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 10.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly complete all as specified and directed. (Note :- Two runs of 10.0 sqmm (FRLS) and one run of 10.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 128 | Taking down carefully ceiling fan from existing site and carry out servicing by opening the motor , removing/ cleaning the dust from complete body , oiling greasing complete incl one coat of white enamel paint in complete fan and lovers.wall or as reqd at site all as directed by Engineer-in-Charge. |
| 129 | Taking down carefully Geyser from existing site and carry out servicing by opening , removing/ cleaning the dust from complete body , complete incl one coat of smoke grey enamel paint complete geyser and making good the surfaces of wall and make the fixing arrangement with grouting four Nos fully threaded bolts on wall or as reqd at site all as directed by Engineer-in-Charge. |
| 130 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 131 | S&F MCB SPN 32 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 132 | S&F MCB SP 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 133 | S&F MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 134 | S&F MCCB Triple pole and neutral 100 Amps 415 Volt curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 135 | S&F in repair vertical loadline sheet metal enclosure double door , triple pole and neutral AC, 415 volts, 04 way, with 200 Amps rated copper busbar and IP- 54 & K 09 protection with the inbuilt provision for fixing of 1 No MCCB 4 pole and 12 Nos MCBs inside of DB , with metal door and flush to wall incl grounding and cutting in existing wall and making good disturbed surface with two coats of white/ colour washing/ distempering etc to match the existing complete all as specified and directed. |
| 136 | Supply and fix flush sheet metal enclosure SPN DB 8 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral links complete including taking down old unsv all as specified and directed. |
| 137 | Taking down carefully electric/electronic meter and fixing the same after bldg repair all as directed by Engineer-in-Charge. |
| 138 | Material & Labour for earthing complete including taking out old unsv and replace with galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased in and including 15 mm dia GI 'light grade' pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe 'light grade' as water pipe from earth chamber and including excavation and earth work, PCC 1:3:6 type C1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced all as specified Total in Figures 0.0 23 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
