|
| 1 | Clearing grass and removal of the rubbish upto a distance of 50 m outside theperiphery of the area cleared |
| 2 | Dismantling roofing including ridges, hips valleys and gutters etc., andstacking the material within 50 meters lead of : G.S. Sheet |
| 3 | Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 |
| 4 | Dismantling wooden boardings in lining of walls and partitions, including supporting members, stacking within 50 meters lead :Upto 10 mm thick |
| 5 | Providing and fixing 9mm commercial ply as false ceiling to rooms |
| 6 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed inposition :Budloo / Fir wood (2\\"x2.5\\" size) Length 400m |
| 7 | Supply of following GI accessories (worn out/ leaking): Socket 15 mm |
| 8 | GI TEE 15 mm |
| 9 | GI Union 15 mm |
| 10 | Ball Valve 15 mm |
| 11 | Angle valve for mixer and geyser points |
| 12 | Extension nipple (size 15mmx50mm) |
| 13 | Wall mixer jaquar or approved make |
| 14 | G.I Pipe 15mm |
| 15 | Long Nose bib cock 15 mm |
| 16 | Engagement of Plumbers for repair of damaged distribution system and installation of supplied accessories. Plumber |
| 17 | Helper |
| 18 | Supply of following electrical items: |
| 19 | 1.50 sqmm make Havells or equivalent |
| 20 | 4.0 sqmm make Havells or equivalent |
| 21 | Combine switch socket 16 amp make Havells or equivalent |
| 22 | Tube light 25 W make Havells or equivalent |
| 23 | LED bulb 9 W make Havells or equivalent |
| 24 | MCB 32 Amp SP make Havells or equivalent |
| 25 | Ceiling Fan high speed energy saving 48 inches make Havells or equivalent |
| 26 | Step up fan regulator of make Havells or equivalent |
| 27 | Strong air suction Exhaust Fan 12 inches make Havells or equivalent |
| 28 | Engagement of electrical fitter and carpenter for repair work of electric items and ceiling of rooms: Electrician |
| 29 | Carpenter |
| 30 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size(30mm) with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. Second kail wood |
| 31 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick.Float glass panes 4 mm thick glass pane (weighing not less than 10 kg/sqm) |
| 32 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead With cement mortar 1:4 (1 cement : 4 fine sand) |
| 33 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 34 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work. |
| 35 | Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete.In colour such as White, Ivory, Grey, Fume Red Brown |
| 36 | Earth work in bulk excavation by manual means over areas (exceeding 30 cm indepth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge: All kinds of soil |
| 37 | Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 38 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Welded |
| 39 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in Cement mortar 1:6 ( 1 cement : 6 coarse sand) |
| 40 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to five level including curing but excluding the cost of centering, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 41 | Centering and Shuttering including strutting, propping etc. And removal of form work for: Suspended floors,walls |
| 42 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts,bolts and washers as required complete as per the direction of Engineer-incharge.Made of G.I. wire of dia 4 mm. |
| 43 | Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length ( total length 90m), having 50nos rounds per 6 meter length, upto 3 m height of wall with existing angle iron ‘Y’ shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire, stud tied with G.I. staples and G.I. clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of Engineer-in-charge, with reinforced barbed tape (R.B.T.) / Spring core (2.5mm thick) wire of high tensile strength of 165 kg/ sq.mm with tape (0.52 mm thick) and weight 43.478 gm/ meter (cost of M.S. angle, C.C. blocks shall be paid separately) |
| 44 | Finishing with Deluxe multi surface paint system for interiors and exteriors using primer as per manufacturers’ specifications: Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture. |
| 45 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C. flushing cistern, including flush pipe (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. |
| 46 | Felling trees of the girth (measured at a height of 1 m above ground level) including cutting of trunk and branches, removing the roots and stacking of serviceable material and disposal of unserviceable material.Beyond 30 cm girth upto and including 60 cm girth. |
| 47 | Providing and fixing high-quality PVC wall panelling including supply of moisture-resistant PVC panels (minimum 6mm thick), corner and edge trims, starter channels, treated wooden/aluminium framework as required, adhesive/fixing accessories, joint sealants, surface preparation, and all necessary labour, tools, scaffolding, and cleaning complete in all respects. |
| 48 | Providing and fixing high-quality PVC floor panelling including supply of moisture-resistant PVC panels (minimum 6mm thick), corner and edge trims, as required, adhesive/fixing accessories, joint sealants, surface preparation, and all necessary labour, tools and cleaning complete in all respects. |
| 49 | Providing and fixing high-quality PVC false ceiling including supply of moisture-resistant PVC panels (minimum 6mm thick), corner and edge trims, starter channels, treated wooden/aluminium framework as required, adhesive/fixing accessories, joint sealants, surface preparation, and all necessary labour, tools, scaffolding, and cleaning complete in all respects. |
| 50 | Carriage of Materials by MT incl. cost of loading, unloading and stacking at site |
| 51 | Cement avg 15 km |
| 52 | Sand avg 125 Km |
| 53 | Aggregate avg 15 km |
| 54 | Steel avg 40 Km Please Enable Macros to View BoQ information |
