|
| 1 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, including Nanital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge. |
| 2 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by by Engr-in-charge. |
| 4 | Dismantling of Stone slabs and tiles of any description or thickness in floors, aprons etc laid bedded and pointed in any mortar |
| 5 | Demolition of Cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by by Engr-in-charge. |
| 6 | Demolition of reinforced cement concret of any description and in any position not otherwise specifically provided for comp[lete all as specified and as directed by Engr-in-charge. |
| 7 | Demolition of Brickwork or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, for ashlar facings, dressed stonework and precast concrete articles and precast concrete block walling complete all as specified and as directed by by Engr-in-charge. |
| 8 | Taking down Chowkhats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 9 | Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frames) complete all as specified and directed by Engr-in-Charge. |
| 10 | Dismantling of wall and ceiling boards(fiber,pulp,insulation,etc.) or insulation boards/slabs/blankets,any thickness,including cover fillets |
| 11 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc |
| 12 | Taking up or down 15/20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by by Engr-in-charge. |
| 13 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc |
| 14 | M&L for reuse of old , purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) incl two coats of synthentic enamel paint & taking down complete all as specified and sirected. |
| 15 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | S&F Plain, galvanised,galvalume zinc coating steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 of 0.63mm thick |
| 17 | M&L for preparation of new steel surfaces of any description over 10 cm width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 18 | M&L Pre-cast cement concrete block masonry with solid blocks, exc. 10 cm in width and setting in mortar, completeType C1 1:3:6 (20mm graded aggregate)Set in cement mortar 1:6 complete all as specified and directed by Engr-in-charge. |
| 19 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 20 | M&L for Reinforced cement concreteType B1 1:2:4 slab,shelves, lintels complete all as specified and directed by Engr-in-charge. |
| 21 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 22 | S&F TMT bars 6mm to 8mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for stirrups, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge. |
| 23 | M&L Rendering 15mm thick Cement plaster 1:4 on fair faces of brick work or concrete sur faces finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 24 | Preparation of new plastered surfaces of walls Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 25 | M&L Rendering 10 mm thick Cement plaster 1:6 on fair faces of brick work or concrete sur faces rendering is to be finished even and smooth (without using extra lime or cement) complete all as specified and directed by Engr-in-charge. |
| 26 | M&L Preparation of new plastered surfaces of walls and applying two coat of OBD white or tinted on walls over a coat of chalk whiting on plastered surfaces ,preparatory to distempering complete all as specified and as directed. |
| 27 | S & F 8 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) |
| 28 | Hangers 3mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified |
| 29 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. |
| 30 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 31 | Supply and fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 32 | S&F Anodised aluminium frame for doors,windows, ventilators atleast size (100 mm X 40mm X 1.54mm ) jindal cat no. 14074 with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 33 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including glass necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, 4 hinges,door stopper, mortice lock, 01 tower bolt, anodised aluminum snap beading screws etc. complete all as specified |
| 34 | S&F Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including glass ,necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (3 no.) suitable handle (1no.) complete all as specified |
| 35 | S&F 6mm-8mm Prelaminated particle board, interior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber frame work complete all as specified and directed |
| 36 | S&F 4.8 mm Sheet glass,ordinary quality and glazing in square n exc 0.5 sq. m in each pane complete all as specified and directed |
| 37 | S&F pressed steel frame made out of MS sheet 1.25mm thick of size 125x60mm for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-0 (12.50 mm graded aggregate) back of chowkhats , 04 no. of hinges welding to shutter , 01, tower bolt, 01 sliding door bolt, 02 handle of 200mm and incl two coats of synthentic enamel paint complete all as specified and sirected. |
| 38 | S&F Mild steel, plain, black sheet thickness 0.63mm in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitredngles, incl two coats of synthentic enamel paint complete all as specified and sirected. |
| 39 | S&F in repairs Door closer hydraulically regulated aliminium (Die cast ) body regulated, designation No. 2, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 40 | S & F in repairs Second class soft wood in Scantling as in wall & roof frame , including taking down old and decayed timber complete all as specified and as directed by Engr-in-charge. |
| 41 | S & F in repairs 2nd class soft-wood Plain fillets,of sectional area exc 13 & n exc 25 Sq.cm square, rectangular or triangular in section clean sawn, secured with nails or brads complete all as specified and directed by Engr-in-Charge. |
| 42 | S & F in repairs for readymade soft wood wall panelling in strips of 100mm width 9-10mm thickness having tongue and groove fixing arrangement fixed to wooden frame work as per manufacturer instruction of any description & French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats ncluding taking down old and decayed timber complete all as specified and as directed by Engr-in-charge. |
| 43 | S&F in repair HDF based laminated wooden flooring planks of size 1.20m x 0.198m x 8 mm thick non glue laminated flooring including 0.6mm PE poly moisture foam as underlay barrier with overlapping 20cm, fixed with adhesive tape. Boarding fixed in floating manner based on tongue and groove interlocking arrangement of any description & French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on old works with two or more coats complete all as specified and as directed. |
| 44 | S&F in repair 2.8-3 mm thick Polycarbonate sheet fixed to wooden /metal frames with suitable fixing arrangements complete all as specified and directed. |
| 45 | S&F in repair 20 mm dia SS Coated Premium quality curtain rails including fixing brackets, stops, side and knobs etc complete all as speified and as directed. |
| 46 | S&F 100 mm long (size) butt hinges, stainless steel with brass/bronze hinge pin, complete all as specified. |
| 47 | S&F stainless steel handle of size 200mm size long complete all as specified. |
| 48 | S&F 300mm long, stainless steel of AISI 316 grade, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and fixed, complete all as specified. |
| 49 | S&F stainless steel of AE - SI 316 grade barrel tower bolt 200 mm long , extruded sections complete all as specified. |
| 50 | S&F continuous (Piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 30 mm, complete all as specified. |
| 51 | Supply and fix 40mm dia, cup board knobs fixed with nuts, screw and washer of brass polished , complete all as specified. |
| 52 | S&F PVC 18/19mm thick PVC moulded solid board, one side prelaminated for cabinet boxes,shutters etc. with shelf and shutters full size fitted under /above kitchen cooking platform and other platform complete all as direction of the Engr-in-Charge and the manufacturers specifications and drawings. |
| 53 | Excavating In post holes (or similar holes) each n.exc 0.5 cu.m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not excedding 25cm complete all as specified and directed |
| 54 | M&L Cement concrete in filling and mass concreteType B-2 1:2:4 (40 mm graded aggregate)in post hole including necessary form work complete all as specified and as directed by Engineer-in-Charge. |
| 55 | M&L for Beam, tee, angle, channel or flat sections, tubular pipe for post including distance pieces, cleats etc complete all as specified and directed |
| 56 | S&F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment etc, complete all as specified and directed |
| 57 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 22.5cm and n exc 30cm long where diameter of neck is 16 to 20mm as required |
| 58 | M&L Cement concrete in filling and mass concreteType B-2 1:2:4 (40 mm graded aggregate)in in sub abse,foundations, filling and mass concrete. complete all as specified and as directed by Engineer-in-Charge. |
| 59 | M&L Plain Cement Concrete Type D-2 1:4:8 (using 40 mm graded granite stone aggregate) in sub base,foundations, filling and mass concrete Complete all as specified and as directed by Engineer-in-Charge. |
| 60 | M&L for Vitrified tiles light shade 8-10 mm thick (square/ ectangular) polished, area of each tiles exceeding 595mm X 595mm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to laying over & including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 61 | M&L for non skid cereamic coloured tiles 400X400X 7 to 8mm thick (square) in floor etc set and joined in neat cement slurry and pointed in white or .coloured cement to match all as specified & directed laying over & including 15 mm thick in cement mortar 1:6 screed bed or bedding layer of mortar for laying floor finishes as directed. |
| 62 | S&F in repairs for 12mm thick rubber mat for flooring fixing with epoxy resins solutions complete all as specified and directed by Engineer in charge. |
| 63 | M&L glazed, coloured, ceramic, tiles of size (450mm x 300 mm) x 6 to 7 mm thick, on vertical surfaces, such as dadoes, etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles all as specified and directed 10 mm thick in cement mortar (1:4) as in backing layer for laying of tiles in vertical surfaces complete all as specified & directed. |
| 64 | M&L for Black Granite slab 16-18 mm thick rubbed and polished machine cut, set in cement mortar jointed with white cement complete including bedding layer 15mm thick in cement mortar 1:6 over rcc platform/shelves & making hole for gas pipe if required etc through precast RCC slab & granite stone etc incl rounding of exposed edges, complete all as specified.Note:- Colour of Granite approved by the direction of Garrison Engineer. |
| 65 | M&L Machine cut kota stone slab flooring 18-20mm thick over cement screed base 20mm thick in C:M 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete |
| 66 | M&L for Chequered cement concrete tiles 30cm x 30cm x 20-25mm thick, set, jointed and pointed in neat cement slurry with grey pigment cement and pigments in floors including 20mm Screed bed or bedding layer of cement mortar 1:6 complete all as specified & directed. |
| 67 | M&L 3-layer PP-R (Polypropylene random copolymer) concealed pipes Outer diameter of pipes 20 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 68 | M&L 3-layer PP-R Polypropylene random copolymer) concealed pipes Outer diameter of pipes 25 mm SDR 7.4 (PN16) UVstabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed by Engr-in-Charge. |
| 69 | Taking down PVC soil, waste and rain water pipes (any size or pattern) including all fittings, heads, shoes, bends, swan-necks, bends etc. Complete. |
| 70 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings ( tee, elbow ,union) complete all as specified and directed by Engr-in-Charge. |
| 71 | S&F in repair PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints,fixed to wall including all connections & fittings complete all as specified and directed by Engr-in-Charge. |
| 72 | S&F in repair PVC (SWR) 75 mm bore pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors including all connections & fittings ( tee, elbow ,union) complete all as specified and directed by Engr-in-Charge. |
| 73 | S&F in repairs Vitreous China counter sunk wash basin, white, embedded in granite counter toip and making good the opening, peroper alignment and sealing, size 550x400mm supply and fixing of waste pipe with and including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc, complete all as specified and as directed. |
| 74 | S&F in repairs staineles steel counter double bowl sink, having depth not less than 150mm embedded in granite counter toip and making good the opening, peroper alignment and sealing, supply and fixing of waste pipe with and including 32 mm Waste fittings, brass,chromium plated for glazed ware sinks, basins, coupling of each bowl etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement etc, complete all as specified and as directed. |
| 75 | S&F in repairs vitreous China wash down water closet pan (pedestal pattern) white, including all connection ,flushing pipe,seat cover,jet spray, anti-syphonage pipe, including other CI fittings wherever required etc.,complete including making good to floor etc, complete all as specified and as directed by Engeer in chargeNote: Qty and Rates are inclusive of CI P and S trap |
| 76 | S & F in repair 10 Ltr capacity PVC valveless syphonic action type flushing cistern low level white with inlet ball valve and brackets float and handle, and bracket all as specified & directed. |
| 77 | S & F in repair vitreous china urinal, half stall type white with grating and union for discharge pipe ,watse pipe & all aceesories including CP spreader complete all as specified and directed by Engr-in-Charge. |
| 78 | S&F in repair fancy type bib taps,15 mm bore cast copper alloy Chromium plated half turn handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 79 | S & F in repair stop valve15mm bore cast copper alloy chromonium plated screwed down high pressure, with half turn handle screwed both ends for iron pipe or for unions all as specified & directed. |
| 80 | S&F in repair fancy type pillar taps,15 mm bore cast copper alloy Chromium plated half turn handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engr-in-Charge. |
| 81 | S&F in repair PPR 20mm bore, globe or gate valves, with iron wheel head, screwed both ends for PPR and fixed complete all as specified and directed |
| 82 | S&F in repair bevelled edge mirror 4.8 mm thick of selected quality glass fixed to wall with chromium plated brass screws complete all as specified and directed by Engr-in-Charge. |
| 83 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed by Engr-in-Charge. |
| 84 | S & F in repair towel rail 600mm long of chromium plated brass screw and wooden / plastic cleats all as specified & directed. |
| 85 | S&F in repair mild steel peg stay of 6 set for use cloth hanger fitted in door or wall with nails all as specified & directed. |
| 86 | S&F in repair Grating down 110 mm dia of Chromium plated without hole all as specified & directed. |
| 87 | S&F in repair Grating down 110 mm dia of Chromium plated with hole all as specified & directed. |
| 88 | S&F storage tank of capacity 1000 Ltrs made of high density virgin polyethylene ( Non reacting material), perfect blend of high and low density vigine polymer with 50 mm machine compressed PUF insulation in middle, in three layers, with suitable locking arrangement including provision of inlet and outlet connection complete all as specifed and directed. |
| 89 | S&F in repair 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule all as specified & directed. |
| 90 | Taking down copper/aluminium point wiring of any description and any position (light, fan, socket or power point) complete, including fixture and fittings such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 91 | Taking down copper/aluminium sub main wiring and making good disturbed surfaces to match with the existing surface roof/wall/floor complete all as specified and as directed. |
| 92 | M&L for point wiring with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable 1100 volts grade single core conforming to IS-694-1990 and including one run of continous earth wire to common earth and connected to earth with 1.5 Sqmm PVC (FRLS) insulated unsheathed multi stranded copper conductor cable draw in & incl PVC surface casing 'N' capping/conduit to be fixed with the help of rawal plugs & screws incl all fittings such as Tee, connector pieces, L-junction etc on joints including PVC sheet Metal flush boxes of anyway (as per site requirement) for mounting switches, sockets, regulators etc for fixing one light/fan/bell point/fan/exhaust fan controlled by one 5/6 A switch and making good disturbed surfaces with CM (1:4) to match with the existing surface complete all as specified and directed. (Notes : Wiring shall be done by using proper colour coding). |
| 93 | All as per srl item No. 92 here-in-before but for 05 Amp socket outlet on indeendent board |
| 94 | All as per srl item No. 92 here-in-before but for 05 Amp socket outlet on same board |
| 95 | All as per srl item No. 92 here-in-before but for 15 Amp independent socket outlet using 2.5 sqmm single core copper wire for phase, neutral & earth complete all as specified. |
| 96 | S&F Switch Piano flush type 5 Amp single pole one way. |
| 97 | S&F Socket outlet 2 in 1, 3 pin, 6A complete |
| 98 | S&F switch socket combination 2 in 1 flush type 15 Amp 5 Pin complete |
| 99 | S&F ceiling rose PVC/Poly carbonate isolated body three terminal AC 230 volts complete all as specified and directed. |
| 100 | M&L for sub main wiring with two single core 6 Sqmm FRLS copper conductor PVC insulated and unsheathed cable including PVC conduit/ casing & caping of medium grade (appropriate size) concealed in wall for sub main connection including 6 Sqmm FRLS insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. Note :- (i) Two runs of 6 sqmm FRLS and one run of 6 sqmm FRLS copper conductor shall be measured as one unit length.(ii) The quoted rete is deemed to be included for the chases cutting. (iii) Cutting chases for concealed shall be made good using CM 1:4 and surface finished to match the existing surface & colour. |
| 101 | Supply and fixing in repair of VTPN DB 4 way suitable for Mounting MCCB as Incomer of rating 100 Amp with suitable rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified. |
| 102 | Supply and fixing in repair of MCB distribution board SPN 240 Volt 8 way with 200 Amp rated bus bar having IP-43 protection and double metal door concealed in wall including connection with aluminium thimbles as required complete all as specified. |
| 103 | S&F of MCCB 100 Amp, 16KA, 4 Pole including complete electrical connection complete all as specified and directed |
| 104 | S&F of MCB SPN 32 Amp 240 volt 'C' curve 10 KA complete all as specified and directed. |
| 105 | S&F of MCB SP 10 to 32 Amp 240 Volt 'C' curve 10 KA complete all as specified and directed. |
| 106 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. |
| 107 | Supply and fixing LED lights fitting 4 feet, 20W, 220V, AC, Batten type pvc casing fitting including connecting up with two core flexible copper conductor cable of suitable size from ceiling rose having luminaire lumen >2000 lm complete all as specified and directed. |
| 108 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V, AC, Batten type pvc casing including connecting up with two core flexible copper conductor cable of suitable size complete all as specified and directed |
| 109 | S & F of building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose complete with GI light grade not less than 1.5 mtr long bend to shape including pole clamps suitable for fixing of GI pipe on the wall with nut bolt & washers all as specified and directed. Please Enable Macros to View BoQ information |
| 110 | S & F of building security LED Light 30 Watt made up pressure die-cast aluminium housing with high power LED as lighting source and lens embedded PC having top opening separate driver compartment with IP-65 protection and impact resistance of IK 07 for building secuity purpose complete with GI light grade not less than 1.5 mtr long bend to shape including pole clamps suitable for fixing of GI pipe on the wall with nut bolt & washers all as specified and directed. Please Enable Macros to View BoQ information |
