|
| 1 | Earth work excavation soil and depositing on bank with initial lead of 10m and lift of 2m in Hard gravelly soil, stiff clay, block cotton,gravel, stoney earth and earth mixed with small size boulder etc., complete including cost of all materials lead lift etc complete as directed by the department engineer at site. |
| 2 | Providing and laying Sand filling for foundation including cost of labour, transport, consolidation, lead and lift etc., complete as per standerd specification and as directed by the department at site. |
| 3 | Plain Cement Concrete 1:3:6 using 40 mm HBG stone including cost of all materials, labour, transport, curing, lead, lift etc. complete as per standard specification and as directed by the dept. Engineer at site. |
| 4 | R:C:C 1:11/2:3 using 12 to 20mm HBG metal Without form work including cost of all materials, transport, lead, Lift, labour, for laying concrete curing etc., complete as directed by the department engineer at site. |
| 5 | R.C.C. 1:1/2:3 using 12- 20mm metal with form work for Plinths, cable duct, cover slabs & Fire Protection wall using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. |
| 6 | Providing and laying P:C:C 1:2:4 using 12-20mm HBG metal without form work including cost of all materials,curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site |
| 7 | Providing and laying P.C.C 1:2:4 using 12-20mm HBG stone for Plinth with form work using steel centering for soffits of reinforced cement concrete slabs or plain surfaces including stutting up to 3m high, using M.S. Sheets of size 90cm x 60cm. and 'B.G.10' guage, stiffened with welded M.S. angle of size 25mm x 25mm x 3mm laid over silver oak (Country wood) joists of size 10cm x 6.5cm. (spaced at about 90 cm c/c) and supported by casurina props of 10cm to 13cm. dia (spaced at 75cm c/c) complying with standard specification including cost of all materials,transport, curing, labour, lead, lift etc. complete.as per standard specification as directed by the dept. Engineer at site. |
| 8 | Plastering in CM 1:3 12 mm thick including cost of all materials, transport, curing, labour, lead, lift etc. complete.as per standard specification and as directed by the dept. Engineer at site . |
| 9 | Providing steel reinforcement for all RCC works including cost of all materilas steel, binding wire, labour, lead, lift, cutting, bending, typing and binding and placing in position etc., complete as directed by the department engineer at site. |
| 10 | Filling with Well gravel including cost of all labour, transport, materials, leads, lift,etc., complete and as directed by the department engineer at site. |
| 11 | Filling with Quarry dust including cost of all labour, transport, materials, leads, lift,etc., complete and as directed by the department engineer at site. |
| 12 | Filling with 12 - 20 mm metal including cost of all labour, materials, transport, leads, lift,etc., complete and as directed by the department engineer at site. |
| 13 | Supplying, fabrication of MS angle/ Channels/ ISMB including cost of MS angle, flats as per drawing and specification and galvanising, placing in position including cost of all materials, galvanizing charges, transportation, labour, lead etc., complete as directed by the department engineer at site. |
| 14 | Colour washing two coats using shell lime over one coat of white washing including cost of all materials, labour, lead lift etc., complete as per standard specification and as directed by the department engineer at site. |
| 15 | Labour charges for assembling of template in correct position and aligenment for various equipment plinth and grouting the foundation bolts including cost of all materials transport, labour, lead, lift etc., complete as directed by the dept. Engineer at site. |
| 16 | Fabrication, galvanising and supply of foundation bolt and nuts with 2 nos. washer in High Tensile Steel including 10 cm L at bottom and 15 cm threading with 2 nuts and washers at top including cost of materials, labour, lead & lift etc., complete as directed by the department engineer at site. (20mm dia -1m length) |
| 17 | Labour charges for back filling of pits with excavated earth other then sand in layers of 15cm thick, including charges for spreading watering, consolidation as per standard specification and as directed by the engineer at site including all labour, transport charges, lead and lift etc., complete. |
| 18 | Labour charges for dismantling of PCC and disposing the debris away from the SS permises including all materials, labour, lead and lift etc., complete as directed by the department engineer at site. |
| 19 | GST for bidders within TamilNadu |
| 20 | GST for bidders outside TamilNadu (IGST) Please Enable Macros to View BoQ information |
