|
| 1 | Removing the existing Doors and Windows including removal of frames, hinges and fastenings clearing away and carefully stacleing materials useful for reused for any thinlenes of wass etc., complete as per specification( W - 0029) |
| 2 | Labour charges for Refixing Door,Windows and ventilators along with frames in position etc., complete. ( W-0148) |
| 3 | Dismantling the existing damaged Brick work including dismantling clearing away and carefully stacleing materials useful for reused for any thinlenes of wass etc.,Complete as per standard specifications (W-0034) |
| 4 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand, silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water wherever necessary refilling the sides of foundation with excavated soil other than sand in layers of 15cm thick well rammed and completed, cleaning and levelling the site etc.,complete - Narrow Foundations - Upto 2.00m Depth Footings\\" |
| 5 | Plain Cement concrete 1:4:8 [one cement, four sand and eight course aggregates] using 40mm size Hard Broken/Machine crushed Granite Stone Jelly including dewatering if found necessary and laid in layers of not more than 15cm thick and compacted etc., complete complying with standard specification. |
| 6 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam |
| 7 | For Grade Beam |
| 8 | For Roof slab |
| 9 | Plain Cement Concrete 1:2:4 (one cement, two M Sand and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 10 | Reinforced Cement concrete 1:1.5 :3 (one cement, one and half sand & three course aggregate) using 20mm gauge hand broken/ and broken granite stone for all RCC items of works excluding centering shuttering and cost of reinforcement but including curing etc.,complete and also including fixing fan clamps and fixtures in rcc works wherever necessary as directed by departmental officer etc., complete. |
| 11 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors as per standard specification |
| 12 | Brick work in CM 1:3 (one cement & five M Sand ) using ground moulded chamber bricks of size 9\\"X4 3/8\\"X 2 3/4\\" standard specification including finishing, curing, etc., complete complying with standard specification |
| 13 | Ceiling Plastering with cement mortar 1:3 mix (one cement three P-sand), 10mm thick in all floors for RCC slabs, Beams, Sunshades including packing, providing cement mortar beading for sunshades, staircase steps, landing slabs etc., as directed by the departmental officers etc., complete complying with standard specifications. |
| 14 | Plastering with cement mortar 1:5 mix (one cement five P-sand), 12mm thick in all floors using clean screened M-Sand and including cost of curing for fifteen days from the completion of the work and surface should free from undulations and including the cost of preparing the surface for plastering and protecting from other damages till setting of mortar etc., complete complying with standard specification. |
| 15 | Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification |
| 16 | Supplying and fixing UPVC (Un-Plasticized polyvinylChoride) Windows of casement type (open) from theprofile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multichambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges offrame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or browncolour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking system and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frmae that enables opening of the window. The indow should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 17 | Supplying and fixing Door shutters for Medium density fiber board of exterior grade 35mm thick, single leaf conforming to IS:12406/1989 with 35x12mm T.W.Lipping on all edges with necessary adhesives and CP screws complying with Standard specifications. The rate is inclusive of three quotes of best quality varnish but excluding cost of furniture fittings. such as 300mm tower bolt2 nos, 200mm tower bolt 1 no.300mm aldrop 1no.Alu handle ornamental type 2 nos and 1 no. door stoper etc complete |
| 18 | Paving the floor with Doubble charged Vitrified tiles of approved quality and colour of size 600x600x8mm thick of approved make, quality and colour in all floors over a base layer of cement mortar 1:3(one cement three sand) 20mm thick and laid straight alignment and pointed neatly with colour cement at the rate of 0.40kg/m2 laid without any air gap in the tiles neatly and fixing in position as per standard specifications and as directed by the departmental officer. The colour & quality of tiles should be got approved by Municipal Engineer before use on work |
| 19 | Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement |
| 20 | Dadooing walls with Glazed tiles of sizes 305mm X200mm X 6mm size of approved make and quality and colour l Set in cement mortar 1:2 (one cement ,two sand) over 10 mm base layer plastering and pointing with white cement neatly as directed. |
| 21 | Supplying and fixing of Cuddapah slab of 38/ 40mm thick in all floors for sitting benches including labour , fixing charges for fixing and polishing etc, complete as directed by the departmental officers .( The quality and size of Cuddapah should be got approved by the Executive Engineer before use on work) |
| 22 | Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with 'P' trap or 'S' trap confirming to IS:2556 - Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. |
| 23 | Supplying and fixing in position White Glazed European Water Closet of best quality and approved make with 100mm 'P' os 'S'' trap with Double flapped rigit P.V.C. seat cover with C.P. brass hinges with 12.5 litres PVC Low Level Flushing Tank with all internal fittings etc., complete complying with standard spoecifications,labor inclusive of fixing lowlevel flushing tank. |
| 24 | Supplying and fixing in position best quality approved make white glazed earthenware wash hand basin of size 550 X 400 mm with a pair of cast iron brackets, including cost of 15mm diametre brass chromium plated piller tape,32 mm diametre C.P. Waste union, 32 mm diametre P.V.C. waste pipe with rubber plug and chain, 15mm diametre G.M.wheel valve, 15mm dia brass nipple, 15mm dia nylon connections etc., including fixing the wash hand basin in the wall in position with a pair of C.I. brackets with teak wood plugs and screws and giving necessary water supply connection and paintiung the brackets with two coats of paint over a primimg coat of anticorrosive paint including testing for leackage etc., complete complying with standard specifications |
| 25 | Painting two coats with ready mixed Plastic Emulsion paint (weather proof) of approved quality and colour over a priming coat, including thorough scraping, clean removal of dirt and including necessary plaster of paris, putty wherever required etc., complete as per standard specifications. |
| 26 | Painting two coats for New iron work surface using best quality synthetic enamel paint etc., complete complying with standard specification. |
| 27 | Supply and fixing of PVC Solid Doors using 19gauge 19mm MS Sq,tubes for styles and frames, 15mm MS Sq.tubes for to, Lock and bottom rails. The Steel Tubes shall be covered with 5mm thick Solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including furniture and fittings. The over all size of styles shall be 50mm X 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm X 30mm. The over all size of frames shall be 50mm X 45mm with suitable tabate for housing the shutter etc, complete as per standard specification. |
| 28 | Supplying fabricating erecting and fixing Hilux (or)equivalent board false ceiling upto ceiling hight 4.50 m from floor level using perforated sheet 10mm thick including all cost and conveyance labour charges etc completed |
| 29 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVCinsulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wall with 3mm thick hylum sheet cover with TW switch box and 5A F.T. switchm with continuous earth wire connection of 14 SWGTC wire for making good of the concealed portion with suitable colour for PVC concealed light point / Fan point (For Electronic regulator). etc, complete as per standard specifications.SD22 |
| 30 | Wiring with 2 x 1.5 sqmm (22 /0.3 ) PVCinsulated single core unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVCaccessories inflush with wall with 150 x 100 x 113 mm TW switch box with 3mm hylum sheet cover for SA 3 pin non inter locking CS plug with continuous earth wire connection of 14 SWGTC wire and making good of the concealed portion with suitable colour for concealed PVC plug point.etc, complete as per standard specifications SD38 |
| 31 | Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour. |
| 32 | Supply and fixing of single box type 4'36 W flu fitting complete with copper choke and condensor with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting etc, complete as per standard specifications SD87 |
| 33 | Supplying and fixing of 1200mm ( 48\\" ) sweep AC ceiling fan complete with regulator with 1Mdown rod including S & F of fan clamp with side plates and cross arm etc, complete as per standard specifications SD 107 |
| 34 | Supplying and fixing of water tight Bulk head fitting with guard (Philips/bajaj/crompton/Klite) suitable for incandescent lamp and 60W bulb.[SD 85] |
| 35 | Earthling as per ISI Specification with an earth electrode of 2.1mt class 'B' GI pipe of dia not less than 40mm and with 20mm dia copper earth flat of size 125mm x50mmx6mm, with funneling arrangement using charcoal, common salt, G.I.reducer, check nuts etc., and masonry work and providing RCC cover slab 38mm thick for the Brick masonry including cost of steel and fabrication of reinforcement etc., complete in all respects as directed by the departmental officers.- SD233 |
| 36 | Supply & installation of 1.5 TR split type ac unit air-conditioner with copper coil AC Unit (carrier / voltas / O General / equivalent) Including cost of all materials at site including cost of 5/8\\" and 3/8\\" copper pipe 3 metres length with necessary fitting arrangements etc complete -P No-153 |
| 37 | Supply and laying of 5/8\\" and 3/8\\" Copper pipe (Extra beyond 3 metres supplied with AC unit) etc complete |
| 38 | Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer with time elay relay (V-Gurad / Equivalent) etc complete |
| 39 | Supply and fixing of MS stand for fixing AC outdoor unit Including Cost and Conceyance of all materials to site and all labour charges for fixing in position and tools and plants etc complete (PWD SOR PG NO: 143) |
| 40 | Supply and fixing of 20A DP plug and socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug) - SD 144 |
| 41 | Supplying and fixing of 1000 litters capacity PVC tank of approved quality including cost of all materials like tankinlet,out let and scour Connection fittings, lead .lift, errection in postion etc complete. PWD SOR PGNO:50 |
| 42 | Supply and delivery of PVC Pipe and G.I Pipes Specials approuved quality of departmental officers loading, unloading, Frieght and transit insurance etc., Cost and conveyance of all materials to Site etc., Complete |
| 43 | 32mm PVC Pipe |
| 44 | 32mm PVC Elbow |
| 45 | 32mm PVC Tee |
| 46 | 40mm PVC Pipe |
| 47 | 40mm PVC Elbow |
| 48 | 40mm PVC Tee |
| 49 | 110mm PVC Pipe |
| 50 | 110mm PVC Elbow |
| 51 | 110mm PVC Tee |
| 52 | 110mm PVC Aircowl |
| 53 | 20mm SS Tap |
| 54 | Supply and fixing of Table, Chair Including Cost and Conceyance of all materials to site and all labour charges |
| 55 | Supply and fixing of Wooden Cupboard arrangement including Cost and Conceyance of all materials to site and all labour charges Please Enable Macros to View BoQ information |
