|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | M&L plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed. |
| 3 | Dismantling of floor, hearth or walls tiles including cement mortar bedding but not backing and rubbish off permises complete all as specified and directed. |
| 4 | M&L for 10mm thick Light shade vitrified ceramic tiles in floors, not exceeding 0.36 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified & directed. |
| 5 | M&L for 10 mm Light shade vitrified ceramic tiles, not exceeding 0.36 sqm as on vertical surface skirtings, dados etc, over and including 10 mm thick rendering in CM 1:4 set and jointed in neat cement slurry mixed with pigments to match the shade of tiles complete all as specified and directed. |
| 6 | M&L for non skid coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or neat cement mixed with pigments to match shade complete all as specified and directed. |
| 7 | M&L for 10mm Dark shade vitrified ceramic tiles in floors, exceeding 0.42 sqm but not exceeding 1.00 sqm set & jointed in neat cement slurry and pointed in neat cement mixed with pigments to match shade complete including screed bed or bedding layer of 15mm thick in CM 1:6. complete all as specified and directed. |
| 8 | M&L for 10mm thick Dark shade vitrified ceramic tiles exceeding 0.42 sqm but not exceeding1.00 sqm in vertical surface such as skirtings, dados etc, with and including over 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in neat cement mixed with pigments to match shade complete all as specifed and directed. |
| 9 | M&L for (7-8)mm thick glazed ceramics coloured tiles of size 450x300mm thick in vertical surfaces such as skirting/dados/wall, etc with and including over 10mm thick rendering in cement mortar (1:4) set and jointed in neat cement slurry and pointed in neat cement mixed with pigments to match shade complete all as specifed and directed. |
| 10 | M&L for non skid joint free coloured tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed with white or neat cement mixed with pigments to match shade .complete all as specified and directed. |
| 11 | M&L for 20 mm thick granite slab (of any type) work (table rubbed and polished) in cooking platforms, steps, window cills, incl edge moulding & cutting holes for gas pipe through drill machine and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 12 | Taking down chowkats or frame with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 13 | All as per above item No 12 but exc 1.5 Sqm and n.exc. 4 Sqm each. |
| 14 | Taking down shutters of any description exc 1.00 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 15 | M&L for cutting holes in brick wall built in cement mortar for inserting holdfast , walls exc half brick n.exc one brick thick and making good dismantled portion in cement mortar 1:3 complete all as specified and directed. |
| 16 | S&F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (with sash bars) divided into squares, with plain chamfered or rounded fitted with cut and mitred beads for securing glass etc fitted to chowkats for door etc complete all as specified and directed. |
| 17 | S & F 30 mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both sides supplied and fitted to chowkats complete all as specified and directed. |
| 18 | S&F steel windows with side hung shutters including hinges with MS handles and tower bolts pegstay, hold fast complete with glazing bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 19 | S&F steel windows with side hung shutters including hinges with MS handles and tower bolts pegstay, hold fast complete without glazing bars dovetailed or welded with one shop coat of zinc chromate primer complete all as specified and directed. |
| 20 | S&F steel ventilators with top hung shutters including hinges, steel peg stay hold fast including taking down existing ventilators complete all as specified and directed. |
| 21 | S&F Mild steel framed works such as grills,gratings,etc, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work for portions framed and hung as gates, including pintle hinges, stops, hand made sliding bolts, etc conforming to Fe 290 Gde -E-165 complete all as specified and directed. |
| 22 | S & F pressed steel frame of size 105 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 23 | S & F pressed steel frame of size 125 mm X 60 mm and 1.25 mm thick MS sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plates etc., including PCC 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in back filling complete all as specified and directed. |
| 24 | S&F Mild steel works as in hold fasts, clamps, plain angle cleats for securing purlins to wood trusses or rafters, cooler stands and similar small articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. |
| 25 | S & F solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S square tube supplying & fixing in opening as per specified & drawing complete all as specified and directed |
| 26 | S&F in Factory Made Solid PVC Moulded Door Shutter with particle board core 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as spd. Make approved by GE |
| 27 | S & F 100 mm size Butt hinges extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed. |
| 28 | S&F aluminum alloy anodised sliding door bolts with hasp & staple & fixing clips of sheet cast extruded section & fixing bolts & sliding bolts of extruded section 300 mm long complete all as specified and directed. |
| 29 | S&F mild steel, 150mm long ordinary helical door spring incl roller and roller plate complete all as specified and directed. |
| 30 | S&F 200mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 31 | S&F 100mm long aluminum anodised barrel tower bolts of extruded section complete all as specified and directed. |
| 32 | S&F 150 mm extruded aluminium alloy handles, fabricated type anodised complete all as specified. |
| 33 | S & F floor door stopper 140 mm overall length of cover plate of aluminium alloy body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 34 | S&F GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 35 | S&F in repair GI wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with stainless steel wire staple complete all as specified. |
| 36 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames glazed with oil putty or fixed with beads complete all as specified and directed. |
| 37 | S& F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square n. exc 0.5 Sqm in each pane complete all as specified and directed. |
| 38 | S& F 5 mm thick sheet glass ordinary quality and glazing with oil putty in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 39 | S&F in repair 18/19 mm thick Block boards, grade 1 quality, exterior grade, decorative type with decorative face veneer on one face, including teak wood lipping, 6 mm thick on sides complete for cupboard shutter and incl shelves all as specified and directed. |
| 40 | S&F in continuous (Piano) hinges 40 mm width of flaps, mild steel, bright finish or electro galvanised complete all as specified and directed. |
| 41 | S&F of ball catches with 8 mm dia steel ball and brass body and striking plate including letting in complete all as specified and directed. |
| 42 | S&F 100 mm long hasp & staple aluminium anodised wire type, incl bolt to hinge plate and fixed with screw complete all as specified and directed. |
| 43 | S&F 100 mm dia extruded brass handle, fabricated type polished fixed to board complete all as specified and directed. |
| 44 | S&F in repair anodised aluminium alloy 20 mm dia curatin rod including brackets as approved complete all as specified and directed. |
| 45 | Easing of steel window of glazed & gauzed shutters including small fittings oiling, greasing and welding if required and make it functional complete all as specified and directed. |
| 46 | Easing of wooden door/ window shutter (Panelled or skelton) and make it functional complete all as specified and directed. |
| 47 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild sleel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 48 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 49 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 50 | S&F Toughned glass 6mm thick as in doors, windows, partitions and similar work including all other fitings, cutting to shape, drilling holes required complete all as specified and directed. |
| 51 | Supply and fixing of 1st class hardwood plain, solid, straight chwokhat and frames, wrought, framed reabted on solid,rounded or chamfered put togther with glue at joints complete all as specified and directed. |
| 52 | M & L in repair 0.9mm Decorative laminate type of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instruction complete all as specified and directed. |
| 53 | M&L in repair 12mm thick plywood, grade BWP,type BB fixed with screws to timber framework; fixed with brass screws and cups complete all as specified and directed. |
| 54 | M & L preparation of new surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 3.00mm putty and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 55 | M & L complete removal of existing surface and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over one coat of 3.00mm putty and including priming coat of primer applied @ 0.90 litre/ 10 sqm at all heights complete all as specfied and diretced. |
| 56 | M&L for applying two coats of oil bound distemper on wall or concrete over a coat of primer on prepared surfaces including, rubbing with sand paper complete all as specified and directed. |
| 57 | M&L for complete removal of existing surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade as New work and applied Two or more coats @ 1.43 ltr/10 sqm over and including priming coat of exterior primer @ 2.20 kg/10 sqm) complete all as specified and directed by eng in charge. |
| 58 | M&L for prepartion of new surface & Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed by eng in charge. |
| 59 | Dismantling wall and ceiling board (fiber, pulp, PVC, insulation etc) or insulation boards / slabs / blankets, any thickness including cover fillets complete all as specified and directed. |
| 60 | S&F Gl frame work powder coated for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre and size of grid 605mm x 605mm complete for false ceiling all as specified and directed. |
| 61 | S & F 6-8 mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Alumi nium framework with screws complete all as specified and directed. |
| 62 | S & F Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 63 | Taking down cement plaster on wall/ceiling /roof etc including raking out joints, hacking for key and scrubbing down with water etccomplete all as specified and as directed. |
| 64 | M&L 15 mm thick rendering on fair faces of brick /concrete surfaces of wall in cm (1:6), finished even and smooth (Without using extra cement ) complete all as specified and directed. |
| 65 | M&L for rendering 15 mm thick in cement mortar 1:4, in two layers (1st layer 10 mm thick rendering coat and 2nd layer 5 mm thick finishing coat) on brick work or concrete surfaces, second layer (finishing coat) mixed with liquid water proofing compound @ 200 ml / 50 Kg bag of cement as per manufacturer's instructions and finished the surfaces even and fair without using extra cement complete all as specified and as directed. Note : Liquid WPC will be measured & paid separately |
| 66 | Supply only water proofing compound (liquid),ISI marked complete all as specified and directed. |
| 67 | M&L PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 68 | M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed. |
| 69 | S&F 125 mm size Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 all as spd. |
| 70 | S&F 200 mm long Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed as specified. |
| 71 | S&F 150mm long Extruded brass handles, fabricated type polished complete all as specified and as directed. |
| 72 | S&F floor door stopper 140 mm overall length of cover plate of brass body and tongue, anodised. With hard drawn spring, fixed in floor complete all as specified and directed. |
| 73 | Taking down AC/PVC pipes (including all fittings), with spigot and socket ends and lead joints including burning out joints of 100 mm dia pipe complete all as specified and directed. |
| 74 | S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete all as specified and directed. |
| 75 | M/L PVC(SWR) bend of 75mm dia of any radius etc complete all as specified and directed |
| 76 | M/L PVC(SWR) Tee of 75mm dia etc complete all as specified and directed |
| 77 | S&F PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to wall/floor complete. |
| 78 | M/L PVC(SWR) bend of 110mm dia of any radius etc complete all as specified and directed |
| 79 | M/L PVC(SWR) Tee of 110mm dia etc complete all as specified and directed |
| 80 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removing to store of 15 mm dia. |
| 81 | Taking up or down steel tubing and connections, including cleaning for re-fixing or removal to store of 20 mm dia. |
| 82 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 15 mm dia complete all as specified and directed |
| 83 | S&F Tubes, ‘medium grade’ galvanized, with all fittings and fixed complete to walls and ceilings or laid in floors of 20 mm dia complete all as specified and directed |
| 84 | S & F in repair 15 mm dia single lever Basin mixer without popup waste system including all necessary fittings as approved complete all as specified and directed. |
| 85 | S&F in repair PVC connection 15mm dia size and 450 mm long with 2 Nos check nuts its washers complete all as specified and as directed. |
| 86 | S&F in repair bib tap 15 mm bore cast copper alloy fancy type chromium plated with capstan head screwed down screwed for iron pipe or for brass ferrule fixed to iron pipe etc. complete all as specified and directed. |
| 87 | S&F in repair brass CP steel tubular towel rail 20 mm dia \\"D\\" type 60 cm long between flange aluminium anodised complete all as specified and directed. |
| 88 | S&F in repair angle cock 15 mm bore fancy type chromium plated, with capstan head, high pressure, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe complete all as specified and directed. |
| 89 | S&F in repair two way angle cock 15 mm bore fancy type chromium plated, screwed down, screwed for iron pipe or for brass ferrule fixed to iron pipe. |
| 90 | S&F in repair Soap dish, any type, fixed to plugs with chromium plated complete all as specified brass screws |
| 91 | S&F in repairs white vitreous china wash down water closet pan pedestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe complete all as specified and directed. |
| 92 | S&F in repair 5 mm thick looking mirror 600 x 450 mm selected quality glass mounted on 6 mm thick commercial plywood, with aluminium beading and fixed to wall with brass screws, cups and washers complete as specified and directed. |
| 93 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick kitchen with plugs, washers and wastes, incl bedding in cement mortar to dwarf wall or incl fixing suitable sizes of cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 410 x 330 x 160 mm complete all as specified and directed. |
| 94 | S&F in repair 0.63 mm thick kitchen plate rack made of stainless steel 914 x 786 x 254 mm size fixing with wooden plug with suitable size of screws complete all as specified. |
| 95 | S&F in repair brass chromium plated overhead shower rose swivel type125 mm with CP arms 300 mm long complete all as specified and directed. |
| 96 | S&F in repair plastic water closet seat cover, Cream / white colour, closed pattern with flat bottom and cover and mild steel chromium plated aluminium hinging device for pedestral pattern WC complete all as specified and directed. |
| 97 | S & F in repair chromium plated toilet paper holder with flap complete all as specified and directed. |
| 98 | S & F in repair Vitreous china wash down water closet pan ( pedestal pattern ) Rimless Bowl With Cistern For Coupled WC With UF Soft Close Slim Seat Cover, Hinges, Conversion Bend, Dual Flush Cistern Fitting, Fixing Accessories And Accessories Set, Size: 675x360x705mm, S Trap- 250 mm (With Conversion Bend) complete all as specified and directed Make : Parrware marble Cat Part No-C8958 or Equivalent as approved by GE. |
| 99 | S&F in repair vitreous china WHB size 550x400 mm white flat back including pvc waste pipe but excluding taps, waste, chain & plug & porcelain stopper but including brackets with two coats of synthetic enamel painting over a coat of red oxide primer etccomplete all as specified and directed. |
| 100 | S&F in repair chromium plated single lever wall mixer \\"L\\" Bend with wall Mixture(Provision of over head shower) complete with 115mm long bend pipe, connecting legs and wall flange complete. |
| 101 | S&F in repair ABS health faucet with 1.0 m long flexible tubes and wall hook suitable for EWC including nut/washer complete. |
| 102 | Dismantling structural steel work including doors, gates but excluding framed truss etccomplete all as specified and as directed |
| 103 | Dismantaling of Asbestos cement/GI (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed |
| 104 | S&F Pre-printed galvalume aluminium zink coating GI based corrugated/semi corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screw/ L-type or J type cranked hook complete all as specified and directed. |
| 105 | S&F rolled mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410W Grade E 250 complete all as specified and as directed. |
| 106 | Dismantling water tanks and removing to store of capacity exc 500 and n exc 1000 ltrs complete all as specified and directed. |
| 107 | S&F Rotational moulded polyethylene water storage tanks in white colour tripple layer (cylindrical vertical with closed top) hoisted and fixed in position of 1000 Ltr capacity complete all as specified and directed. |
| 108 | Demolition of brick work built in cement mortar including all quions, arches, pillars, etc complete all as specified and as directed. |
| 109 | M&L brick work with sub class ‘B’ bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and as directed. |
| 110 | M&L brick work with sub class ‘B’ bricks straight or curved on plan to any radius built in CM 1:4 in half brick thick wall complete all as specified and directed. |
| 111 | M&L for preparation of new wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint (Ordinary tint) over a coat of pink primer complete all as specified and directed. |
| 112 | M & L preparation of new steel surfaces any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat red oxide primer complete all as specified and directed. |
| 113 | M&L Preparing old wooden surfaces exceeding 10Cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 114 | M&L Preparing old steel surfaces exceeding 10Cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 115 | M&L for applying 2mm thick Birla / JK Putty on old wall surfaces including complete removal of existing wall finish of any type with wire brush, brooming, dusting and finally washing with water to clean the surface absolutely free from any kind of foreign materials and making good minor cracks etc. and surfaces absolutely even and smooth, rubbing with sand paper complete all as specified and as directed. |
| 116 | M & L for preparation of newly plastered surfaces of wall & concrete and applying 2 mm thick wall care putty including preparation complete all as specified and as directed. |
| 117 | M&L for prepation of existing surface and applying two coats of oil bound distemper on wall complete all as specified and as directed. |
| 118 | M&L for complete removal of existing suraface and applying two coats of oil bound distemper on wall complete all as specified and as directed. |
| 119 | M&L for complete removal of existing suraface and applying two coats of oil bound distemper on ceiilng complete all as specified and as directed. |
| 120 | M&L for preparation of old decorated plastered or unplastered surfaces of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash complete all as specified and directed. |
| 121 | Same as item No 120 above but on ceiling complete all as specified and directed |
| 122 | M&L preparation of new/ old plastered or unplastered surfaces of wall and applying two coats of cement based paint over a coat of primer complete all as specified and directed. |
| 123 | M&L for PCC 1:2:4 type B0 (Using 12.50 mm graded stone aggregate) in roof padding/kerbs/sunken slab etc complete all as spd and directed, |
| 124 | M&L 10 mm thick rendering on roof surfaces/concrete surface in CM 1:4 complete. |
| 125 | M&L for water proofing treatment on non approachable / non accessible roof surface horizontal and vertical surfaces in following sequence through manufacturer / authorized applicator of the manufacturer complete all as specified and directed :-(i)Taking down APP roofing sheet/Terrazo/Tiles of any description incl mud/cement plaster etc and cleaning the top surface, washing down etc. Prepared to receive water proofing treatment , incl filing of cracks, groves etc in neat cement slurry complete all as spd. (ii) Properly cleaning and drying concrete surfaces.(iii) Applying a coat of oxidized bitumen based solvent primer @ 0.3 Kg / sqm.(iv) Applying evenly tack coat of industrial bitumen 85 / 25 grade @ 1.2 Kg / sqm.(v) Laying unrolled over the bitumen coated surfaces polymeric water proofing membrane, hyperplas standard weight not less than 3 Kg / sqm with 100 mm over laps shall be sealed by flame as per manufacturer instruction.(vi) Applying a coat of bituminous aluminium paint @ 100 gm / sqm over and including a coat of hot air blown grade bitumen of grade 85 / 25 @ 1.2 Kg / sqm duly sanded over polymeric membrane complete. |
| 126 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed. |
| 127 | M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 1.5 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring for one light/fan/bell/buzzer / exhaust fan point controlled by one, one way switch, including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 1.5 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 128 | Same as item No. 127 here-in-before but one 3 pin, 5amp socket out let on independent board complete all as specified and directed. |
| 129 | Same as item No. 127 here-in before but 3pin ,5amp socket out let on the same board with other switch complete all as specified and directed. |
| 130 | Same as item No. 127 above but for one 6 pin 15/16 amps socket outlet point on an independent board with cables of size 2.50 Sqmm. |
| 131 | M&L for point wiring complete with PVC insulated unsheathed, 1100 volts grade cable 4.0 Sqmm (nominal area) FRLS type multi stranded copper conductor, single core drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring including concealed pressed steel terminal box of required size not less than 1.0 mm thick factory made duly painted inside & outside with two coats of black bituminous paint over & including a coat of red oxide primer, with 2.8 mm thick top cover of plastic laminated sheet of required colour for mounting switch, sockets, fan regulator etc including 4 Sqmm FR type PVC insulated unsheathed cable multi-stranded copper conductor as continuous earth wire and connected to earth dolly as required at site& including chases cutting & making good disturbed surface & applying finishes to match existing surface complete all as specified and directed. |
| 132 | M&L sub main wiring with two single core PVC insulated & unsheathed cable 6.0 Sqmm (nominal area) FRLS type having multi-stranded copper conductor drawn in and including not less than 20 mm dia rigid PVC conduit 'medium grade' ISI marked including all conduit accessories for concealed wiring with and including 6.0 Sqmm FRLS type PVC insulated unsheathed cable multi-stranded copper conductor as earth wire connected to common earth as per IS & cutting chasing for conduit & sinking for boxes & making good to walls disturbed surface & applying finishes to match existing surface complete including taking down of exsting sub main wiring complete all as specified and directed.NOTE : Two runs of 6 Sqmm and one run of 6.0 Sqmm cable and PVC conduit shall be measured as a one unit length. |
| 133 | S & F Modular metal flush box 1/2 module |
| 134 | S & F Modular metal flush box 3 module |
| 135 | S & F Modular metal flush box 4 module |
| 136 | S & F Modular metal flush box 6 module |
| 137 | S & F Modular metal flush box 8 modules(Horizontal) |
| 138 | S & F Modular metal flush box 12 (3 row x4) modules |
| 139 | S & F modular white cover plate 1 module |
| 140 | S & F modular white cover plate 2 module |
| 141 | S & F modular white cover plate 3 module |
| 142 | S & F modular white cover plate 4 module |
| 143 | S & F modular white cover plate 6 module |
| 144 | S & F modular white cover plate 8 (Horizontal) modules |
| 145 | S & F modular white cover plate 12 (2 x 6) modules |
| 146 | Supply & fixing switch modular flush type 6 amps, single pole, one way complete all as specified and directed. |
| 147 | Supply & fixing socket modular flush type suitable for 6 amp, 2/3 module combined 2 module complete all as specified and directed. |
| 148 | Supply & fixing switch modular flush type 16 amps, single pole, one way complete all as specified and directed. |
| 149 | Supply & fixing socket modular flush type suitable for 6/16 A, 2/3 pin combined 2 module complete all as specified and directed. |
| 150 | S&F ceiling rose single phase , PVC poly carbonate,insulated body three terminals ISI marked complete all as specified and directed. |
| 151 | S&F sheet metal enclosure for 4 way TPN DB double door 415 Volt with 200 amp rated bus bar complete with suitable for 1 x 63Amp TPN as incomer and MCB SPN as outgoing connection through proper size of lugs and cable glands including taking down existing MCB DBs complete all as specified and directed. |
| 152 | Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of 4 poles and current carrying capacity 63 Amp in the DB complete with connection testing and commissioning |
| 153 | S& F for sheet metal enclousre factory made for MCB DB's SPN, 12 way, double door, 240 Volts with 200 Amp rated bus bars including taking down existing unserviceable MCB DB complete make -Havells all as specified and directed. |
| 154 | S&F MCB SP 240 Volt 6 TO 40 Amp ISI marked conforming to 'B\\" curve, breaking capacity 10 KA complete all as specified and directed. |
| 155 | S&F MCB SPN 40 amp 30mA for earth leakage. Over load and short circuit protection ISI marked complete all as specified and directed. |
| 156 | Supply & fixing fan regulator, modular type, 120 watt single phase complete all as specified and directed. |
| 157 | Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type Extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser , 4 ft,2000lm,voltage protection range 140V -270 V,NW 4000K , warm type ,connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Philips /bajaj or eqivalent. |
| 158 | Supply and fix 5 W round warm white LED Panel light ceiling/recessed mounted luminous efficiency 75 Lm/W IP 20 including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed |
| 159 | Supply, fixing and testing of ceiling fan 1200 mm sweep, heavy duty, single phase, AC, 230 Volts, 50Hz, BEE 5 star rating, ISI marked complete with down rod, canopy, blades, BLDC motor , electronics fan regulator etcwith 5 year on site warranty and connecting up complete including complete connection from ceiling rose to fan including writing of MES Number with synthetic enamel paint and taking down old unserviceable one to MES store for BER, complete all as specified and as directed. |
| 160 | Supply and fixing wall light decorative type matte nickel finish brass designed with brass single bulb with base E27 type complete all as specified and directed. |
| 161 | Supply and fix wall fan high speed 400 mm electric corded 1500 RPM ,input voltage 240 V sturdy base and thermal overload protectionfor safety and durability with remote complete all as specified and directed. |
| 162 | Supply and fix electric water heater,storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate,NRV, connection piece etc.and taking down old unserviceable one to MES store for BER, complete all as specified and directed. |
| 163 | Supply and fix Outdoor garden light made up of polycarbonate weather resistant ,rust resistant , with B22 holder,having dia 18 -25 cm , height 28 -30 cm suitable for existing GI pipe complete all as specified and directed. |
| 164 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm complete all as specified and directed. |
| 165 | Dismantling post or struts(wood, steel or RCC) any section, including taking out embeded portion and making good disturbrd surface complete all as specified and directed. |
| 166 | Dismentling fencing wire mesh of any type complete all as specified and directed. |
| 167 | Excavation in post hole (or similar hole) each n exc 0.50 cum, getting out returning filling in and ramming earth or broken rubble mixed with earth around in layer n. exc 25 cm etc and getting out soft/ loose soil complete all as specified and directed. |
| 168 | M&L for Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips conforming to Gd I, IS-432 (Part-I) Complete all as specified and directed. |
| 169 | Supply only Chain Link MS galvanized fencing of 4.00 mm dia of wire and 75x75 mm aperature complete all as specified and directed. |
| 170 | Fixing Only Chain Link fencing including line wires, any mess, size and type to any type of standards, rails, straining bolts, etc including provision of binding wires, complete all as specified and directed |
| 171 | S&F for mild steel work as in posts and struts etc in fencing including cutting tops to shapes as directed, drilling holes, notching for wire etc flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 172 | S&F in repair for ornamental and intrensic design gate or red iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work like for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc and for ornamental and intricate designconforming to Fe.290.Gde-E-165 complete all as specifed and directed. |
| 173 | M&L for old size brick work with sub class 'B' Bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:4 complete all as specified and directed. |
| 174 | M&L 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth (without using extra cement) complete all as specified and directed. Please Enable Macros to View BoQ information |
