|
| 1 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge.Make: Fabricated Items |
| 2 | Providing, fixing, testing and commissioning of Perched air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required and Suitable cement concrete foundation with plaster, along with all neccessory floor supporting stand and foundation arrangement.(Vessel should be suitable for rated working pressure) as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Fabricated Items |
| 3 | Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 4 | 25 mm dia pipe |
| 5 | 32 mm dia pipe |
| 6 | 50 mm dia pipe |
| 7 | 65mm dia pipe |
| 8 | 80mm dia pipe |
| 9 | 100 mm dia pipe |
| 10 | 150 mm dia pipe |
| 11 | 200 mm dia. Pipe(with thickness 6.3mm) |
| 12 | Makes:- Jindal/Tata./Surya Tube. |
| 13 | Providing two coats of synthetic enamel paint of approved shade over a coat of primer. Prior to application of primer the surface should be cleaned for any dirt, rusts, rough substance etc. Including painting of legends both direction arrow as per the approval of the Project Manager as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 14 | 25mm dia pipe |
| 15 | 32 mm dia pipe |
| 16 | 50mm dia pipe |
| 17 | 65mm dia pipe |
| 18 | 80 mm dia pipe |
| 19 | 100mm dia pipe |
| 20 | 150mm dia pipe |
| 21 | 200 mm dia pipe |
| 22 | Providing fixing,testing and commissioning of 15 mm dia chrome furnished sprinkler head with quartz type bulb,Pendent/Upright operate at 68 degreeC complete as per specification, sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 23 | Makes:Minimax/Padmini/Omex/Sant |
| 24 | Providing & Fixing of burden type Stainless Steel dial type pressure gauge with brass isolation valve and pipe of 100 mm dia with Caliberation: 0-20 Kg/cm2 as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 25 | Make:- H Guru, Bell, Fiebig |
| 26 | Supply, installation, testing & commissioning of single headed Gun Metal ISI marked odlique pattern internal/External hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type'A'), including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 27 | Makes:Minimax/Padmini/Omex/Sant |
| 28 | Providing & Fixing of 63 mm dia 15 m long non-percolating flexible hose (RRL- type A) as per IS : 636. Type A with Stainless Steel male & female instantaneous type coupling (IS 903) (For internal and External hydrant system) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 29 | Makes:Minimax/Padmini/Omex/Sant |
| 30 | Providing and Fixing Stainless Steel 63 mm dia instantaneous pattern branch short pipe, 20 mm dia nozzle conforming to IS 903, suitable for inter connection to hose pipe coupling as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 31 | Makes:Minimax/Padmini/Omex/Sant |
| 32 | Providing and fixing cast iron air release valve of 25 mm dia including 25 mm dia Ball valve with fittings etc. as per the requirement. |
| 33 | Makes:-SANT/ZOLOTO/LEADER/ KIRLOSKAR/ Kartar |
| 34 | Providing & fixing of Bitumein sheet 4mm thick (pipekot) wraping & coating for underground pipe150 mm dia. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 35 | Make Shalimar/WTL or equivalent |
| 36 | Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty water hose thermoplastic (Teitile reinforced )type I, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 37 | Makes:Minimax/Padmini/Omex/Sant |
| 38 | Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hosing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete in all respect as requried. including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. (For internal and External hydrants) |
| 39 | Makes:Minimax/Padmini/Omex/Sant |
| 40 | Providing Cast iron /steel Butterfly Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt, nuts, gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 41 | 50 mm Dia |
| 42 | 80 mm Dia |
| 43 | 100 mm Dia |
| 44 | 150 mm Dia |
| 45 | 200 mm Dia |
| 46 | Makes:-Zoloto/Sant/Leader/Kirloskar |
| 47 | Providing and fixing Cast Iron dual plated Check Valve (NRV) horizontal type with gunmetal seat non-return valve confirming to class - I of IS : 5312 including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 48 | 80 mm dia |
| 49 | 100 mm Dia |
| 50 | 150 mm Dia |
| 51 | 200 mm Dia |
| 52 | Makes:-Zoloto/Sant/Leader/Kirloskar |
| 53 | Supplying and fixing of fire brigade connectiion fo cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as required for suitable dia MS pipe connection conforming to IS 904 as required. |
| 54 | 4 way -150 mm dia M.S. Pipe |
| 55 | Makes:Minimax/Padmini/Omex/Sant |
| 56 | Providing and fixing Carbon dixoide CO2 4.5 kg type fire extingushers ISI mark. CE and EN Certfied, consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and M S Wheel type complete with internal charge as required complete in all respects. |
| 57 | Makes:Minimax/Padmini/Omex/Sant |
| 58 | Providing and fixing stored pressure vessel ABC 6 Kgs. Powder type fire extingushers ISI mark. CE and EN Certfied,consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hoase, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. |
| 59 | Makes:Minimax/Padmini/Omex/Sant |
| 60 | Providing & fixing of IS marked 15683 Water type 9 Litre (S/P) cylindrical body, squeeze lever discharge valve fitted with pressure discharge hose, discharge nozzle, etc. finished externally with red enamel paint and fixed to wall with brackets complete with internal charges. |
| 61 | Makes:Minimax/Padmini/Omex/Sant |
| 62 | Supply, installation, testing and commissioning of electrically driven high pressure centrifugal fire hydrant / sprinkler pump, suitable for automatic operation consisting of the following: |
| 63 | (a).Multistage Multi-outlet, centrifugal pump (Flow : 2280 LPM and Head : 70 mtr), suitable for operation on 415 volts ± 10 %, 3 phase, 50 HZ A.C supply. The installation shall be complete with flexible coupling and coupling guard as required. Fire pump shall have C.I. casing, CS diffusers, bronze impeller (hard finished and dynamically balanced) and S.S. (410) Shaft with mechanical seal, capable for delivering the required flow at the required head to ensure a minimum pressure of 3.5 Kg/Sqcm at the farthest or topmost hydrant / sprinkler. The installation shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side.(b).Squirrel cage induction motor, TEFC type suitable for operation on 415 volts, 3 phase 50 HZ A.C supply, of suitable Capacity (45 KW.) for the above pump with synchronous speed of 2900 RPM, conforming to IP 55 protection & class F insulation. The motor shall conform to IS 325-1978 (up to date) with flexible coupling and coupling guard, complete as required.Common base plate for (a) and (b) from G.I.Channel for required size.(d)d) Suitable RCC pump-Foundations as per manufactures design and 4 nos Dunlop (cushy foot) heavy duty Antivibration mounting pads. |
| 64 | Make:- Kirloskar/Siemens/Grundfoss |
| 65 | Supply, installation, testing and commissioning of Diesel Engine driven fire pump suitable for automatic operation comprising of the following and conforming to BS 649/IS 10002 all amended upto date. |
| 66 | A) Horizontally mounting,centrifugal type single/multi-stage fire pump having cast ironbody, bronze impeller,stainless steel shaft &capable of delivering 2280LPM against a total head of 70 M complete withnecrssary Y stainer on the sunction side and pressure gauge with stop cocks etc. on the delivery side including bybass arrangement (with 50mm dia GM stop valve and upto 5mGI stop valve and upto 5M GI medium pipe) for perodical testing of thepumping set of the pumping set as per TAC rules. b) Water cooled TAC approved Diesel Engine suitable for the developing at least 62 BHP at 2150RPM for above pumping complete with autmatic starting mechanism, batteries,automatic battery charger unit,flexble coupling withthe pump,coupling with the pump,fuel tank,silencer,exhaust pipe with insulation appro. 25m length& all standard accessories as requrid asper TAC rules including earthing,mandatory spares and tool kit. c) Common bed plate for mounting pump and Engine fabricated of suitable MS channel as per manufacturer recommendations. d)Suitable RCC pump foundation as per manufacture design 8Nos Dunlop Anti-vibration(cushy foot) heavy duty mounting pad. |
| 67 | Make:- Kirloskar/Siemens/Grundfoss |
| 68 | Supply, installation, testing and commissioning of jockey pump (pressurization pump) comprising of the following: |
| 69 | (a)Horizontal pump(Flow :180 LPM and Head :70mtr) suitable for operation on 415 volts ± 6%, 3 phase, 50 HZ A.C supply. The installation shall be complete with Flexible coupling and coupling guard, complete as required.The pump casing shall be CI, shaft shall be SS & impeller/ shaft sleeve/casing wearing ring shall be bronze. The pump shall be provided with mechanical seal The system shall be complete with necessary pressure gauge with gun metal shut off cock on delivery side. b)Squirrel cage induction motor totally enclosed fan cooled type suitable for 415 volts +10%-10% 3 phase 50HZ AC supply of suitable capacity(appro11KW) for the above pump with synchronous speed of 1500/3000 RPM confirming to IS325 &duly coupled with above pump coupled with flexible coupling including earthing as per relevant Indian Standard and specification. c) Common bed plate for mounting pump and Motor fabricated of suitable MS channel as per manufactures recommendation. d)Suitable RCC pump foundation as per manufactures design Dunlop 4 Nos Dunlop Anti-vibration (cushy foot) heavy duty mounting pads. |
| 70 | Make:- Kirloskar/Siemens/Grundfoss |
| 71 | Supply, installation, testing and commissioning of Pressure switch for fire pumps of approved make,including necessary wiring and cut off valve up to central panel & other material as described in specifications. |
| 72 | Make:- Indfoss /System Sensor |
| 73 | Fabrication, supply, Insallation testing & commissioning of Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, interconnection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts.MAKE of switchgear:- L&T/ABB/HAGER/LEGRAND |
| 74 | INCOMING |
| 75 | 400A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0 500V with selector switch Digital Ammeter (0-400 A) with selector swtich & CTs etc.LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 500A |
| 76 | OUTGOING( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) |
| 77 | Main Fire Pump200 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 75 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.-1 sets |
| 78 | Jockey Pump100 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation.-1 sets |
| 79 | DIESEL ENGINE CONTROLControl for diesel engine comprising -Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0- 20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engineSystem ControllerDesigning, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, complete as per specification, including any petty material, accessory required to complete the job as required including entire carriage with all leads and lifts. |
| 80 | Providing, installation,testing and commissioning of Stainless steel Y strainer fabricated out of 1.6 mm thick stainless steel. Grade 304 sheet with 3mm dia hole with stainless steel flange including carriage of material in all leads and lift. |
| 81 | 200 mm dia |
| 82 | Makes:-Zoloto/Sant/ Kartar |
| 83 | Providing, installation,testing and commissioning of C.I ball Footvalve type of pattern Y Type/ pressure/Class/ Rating: PN16 MS rubber Coated IS: 210 FG 260 flanges IS:1538 including carriage of material in all leads and lift. Makes:-Zoloto/Sant/ Kartar |
| 84 | 200 mm dia |
| 85 | Suppling and installation following Size of Perforated Hot Dipped Galvanised iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5% in convenient sections, joined with connectors, suspended from the celling with G.I suspenders including G.I bolts & nuts,etc as required. |
| 86 | 225 mm width X 50 mm depth X 1.6 m Thickness |
| 87 | Supply of M.S structure Work for the sprinkler line with Angle support with welding work, Thread rod , Fastner etc. complete in all respect. |
| 88 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required.Makes:-Polycab,Finolax,Havells |
| 89 | Armoured cable 35 sq. mm (3.5 core) |
| 90 | Armoured cable 70 sq. mm (3.5 core) Please Enable Macros to View BoQ information |
