|
| 1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. i) Group C.Make:-Havells, Finolex, RR Kable, KEI, Grandley, Plaza,SSK |
| 2 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make :- Havells(REO) , (Athena), Goldmedal(Air ) (GIFa),Anchor(Penta),Legrand (arteor), L&T(Entice), SSK |
| 3 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required complete in all respect as per entire satisfaction of Engineer- in- Charge. Make :- Havells(REO) , (Athena), Goldmedal(Air) (GIFa), Anchor(Penta), Legrand (arteor),L&T (Entice),SSK |
| 4 | Supplying and fixing G I modular Box of 205 mm x78mmx50mm size with modular plate and cover in recess including providing and fixing 3 Nos 5 pin 5/6 Amps modular socket outlet, 3 Nos 5/6 Amps modular switch, as required etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make :- Havells(REO) , (Athena), Goldmedal(Air) (GIFa),Anchor(Penta), Legrand (arteor), L&T(Entice),SSK |
| 5 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make :- atomberg (Efficio), Havells(Efficia Neo),Orient ,Gold Medal , Bajaj . |
| 6 | Ceiling fan 1400 mm sweep (Category -A ) |
| 7 | Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.i) Exhaust Fan, Heavy duty, 450 mm sweep (1400rpm) Make:-atomberg ,Havells,Orient,Gold Medal, Bajaj |
| 8 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. i) Single pole. Cat-A.Make:- Havells, ABB, Legrand, L&T, schneider,C&S , SSK |
| 9 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge Make:- Havells, ABB, Legrand, L&T, schneider,C&S , SSK |
| 10 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc.as required complete in all respects and to the best satisfaction of Engineer-in-charge Make:- Havells, ABB, Legrand, L&T, schneider,C&S , SSK |
| 11 | Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- Havells, ABB, Legrand, L&T, schneider,C&S , SSK |
| 12 | Double door-8 way |
| 13 | Double door-12 way |
| 14 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:-Havells, Finolex, RR Kable, KEI, Grandley, Plaza,SSK |
| 15 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 16 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 17 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 18 | 4 X 4 sq. mm + 2 X 4 sq. mm earth wire |
| 19 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 20 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required complete in all respects and to the best satisfaction of Engineer-in-charge Make:-Havells, Finolex, RR Kable, KEI, Grandley, Plaza,SSK |
| 21 | 3 x 1.5 sq. mm |
| 22 | 3x 4 sq. mm |
| 23 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 24 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 25 | Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required. complete in all respect as per entire satisfaction of Engineer- in- Charge. |
| 26 | Providing and installation of following type of recess mounting square type LED Downlight with polycarbonate housing ,anti glare polycarbonate diffuser,surge protection 2.5 KV luminaire efficacy > 85lm/Watt with minimum 25000 burning hours,THD<15% in white finish and seprated energy efficient constant current, non-integral, electronic driver; relevent LM 79/80 complaince from UN/NABL Labsuitable for input voltage: AC 140-270 V, 50/60Hz, complete with all accessories, connections, testing etc. as required complete in all respect as per entire satisfaction of the Engineer in charge. i) Square LED Down Light 24W RecessMake :-bajaj, havells, Goldmedal, panasonic, Philips,Wipro,Changi |
| 27 | Supplying and fixing 30 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 30 A \\"C\\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- Havells, ABB, Legrand, L&T, schneider,C&S , SSK |
| 28 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respects and to the best satisfaction of Engineer-in-charge. i) 25 mm Make:- Anchor,AKG,RKG,Precision Pipes,Diplast |
| 29 | Providing and fixing of Direct Online Starter 0.75 HP to 7.5 HP , 415 volts,conforms to IS/IEC 60947-4-1 , Class H insulation , Starter type Air - break , provided with Protection degree IP 54 ,FRLS internal wiring, etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 30 | Supplying & fixing 100 Watt 6500K Flood lights with best in class design &Robust heat sink along with class leading IP,IK & Surge protections for long lasting performance complete with all accessories ,connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make :-bajaj, havells, Goldmedal, panasonic, Philips,Wipro,Changi |
| 31 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 600mx600mm x 300mm deep (nominal) including,Bus Bar 63Amp. = 0.3 Mtr .MCCB 100 Amp. 36 ka 4 Pole Release without rotary handle4 Pole 415 Volt. with Thermal Magnetic Release= 1 Nos Selector switch = 2Nos Digital Ammeter = 1No, Digital Volt Meter= 1No, CT Coil = 3 Nos and internal control wiring etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 32 | Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form:- 1000mx1000mm x 300mm deep (nominal) including,Bus Bar 320 Amp. = 0.5 Mtr . MCCB300 amps= 1 Nos. Selector switch = 2Nos Digital Ammeter = 1No, Digital Volt Meter= 1No, CT Coil = 3 Nos and internal control wiring etc.as required complete in all respects and to the best satisfaction of Engineer-in-charge. Please Enable Macros to View BoQ information |
