|
| 1 | Supplying and drawing following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. |
| 2 | 3 x 1.5 sq. mm |
| 3 | 3 x 2.5 sq. mm |
| 4 | 3 x 4 sq. mm |
| 5 | Supply and fixing of 32 x 20 mm DLP mini- trunking white-system with independent cover etc. as required complete. |
| 6 | Supply and fixing of following accessories suitable for 32 mm x 20 mm size plastic trunking white system. |
| 7 | End cap |
| 8 | internal / external angle |
| 9 | changeable flat angle |
| 10 | flat junction |
| 11 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 12 | 5/6 A switch |
| 13 | 15/16 A switch |
| 14 | 3 pin 5/6 A socket outlet |
| 15 | 6 pin 15/16 A socket outlet |
| 16 | two module stepped type electronic fan regulator |
| 17 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required. |
| 18 | 3 Module |
| 19 | 6 Module |
| 20 | 8 Module |
| 21 | Supplying and fixing following size/ modules, plastic box for modular switches in recess etc as required. |
| 22 | 3 Module |
| 23 | 6 Module |
| 24 | Supply and fixing of following accessories suitable for 105 mm x 50 mm size plastic trunking white system. |
| 25 | End cap |
| 26 | flat junction |
| 27 | flat angles |
| 28 | Supply and installation of 400mm sweep AC 230/250 volts, 50 Hz wall mounting revolving fan with brackets etc complete. |
| 29 | Overhauling of ceiling fan of any size including dismantling and refixing of fan, bearings, checking, cleaning the all parts and supply & replacement of rubber real, rubber rings, nut bolts, hanger clamps, bearing plates, cotter/ split pin, varnishing if reqd etc, reassembling testing and commissioning of fan as required complete. |
| 30 | Brush Less Direct Current (BLDC) Fan without Remote Supply, Installation, Testing and Commissioning of ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. metal( Aluminium alloy) blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, steel/Al body Power Factor not less than 0.9, Service Value (CM/M/W) minimum as below, 350 RPM (tolerance as per IS : 374-2019), THD (Total Harmonic Distortion) less than 10%, suitable for operation with regulator for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 0C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC supply, Ceiling Fan compliant to IS 374:2019 fan i/c external connections with 1.5 sq.mm FRLS/HFFR, PVC insulated copper conductor single core cable and earthing etc. as required. |
| 31 | 1200mm, service value = 6.0 CM/Min/Watt, air delivery 210 CM/Min (Minimum) |
| 32 | Supply and fixing of following LED light fixture with efficiency >100 lumen/ watt, P.F. >0.95, THD<10%, Electronic driver, LED lamp, reflector, diffuser, MS body/housing holder etc. complete with all fixing accessories and lamp as required complete. |
| 33 | 36 watt recess mounting LED light fixture 300 x 1200 mm |
| 34 | 36 watt surface mounting LED light fixture 300 x 1200 mm |
| 35 | Dismantling, disconnecting old damaged unserviceable fl fitting/ exhaust fan/ ceiling fan/ bulkhead fitting with bracket etc. as reqd. and depositing in sectional store. |
| 36 | S & F following size of steel flexible pipe along with the accessories on surface etc as required |
| 37 | 20 mm |
| 38 | 25 mm |
| 39 | Supplying & fixing 3mm (1/8\\") thick phenolic laminated sheet on existing board with screw & washer etc. as required. |
| 40 | Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. |
| 41 | 3 Module (100mmX75mm) |
| 42 | 4 Module (125mmX75mm) |
| 43 | 6 Module (200mmX75mm) |
| 44 | 8 Module (125mmX125mm) Please Enable Macros to View BoQ information |
