|
| 1 | Wiring for light/ fan/ exhaust fan/ call bell point with 2x1.5 sq. mm PVC insulated copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall complete with 6/10 amps modular type switch, cover plate, GI box including necessary connection etc. as required |
| 2 | Providing and fixing of 3 pin 6/10 amps plug point with modular type 6/10 amps switch and socket including connection with 2 x 1.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required. |
| 3 | Providing and fixing of 3/6 pin 16/20 amps plug point with modular type 16/20 amps switch and socket including connection with 2 x 2.5 sq. mm PVC insulated Copper conductor cable (FR) on modular concealed switch board with cover plate earthing the 3rd pin etc. as required. |
| 4 | Chase cutting of wall for concealing existing pvc conduit pipes of 20 to 32 mm sizes, G.I switch boards, G.I junction boxes etc in wall and making good the same with cement plaster of mix : Cement mortar 1:3 (1 cement : 3 fine sand) i/c fixing the existing pipe with clamps at 0.5 m spacing as per direction of Engineer in Charge. |
| 5 | Supplying and fixing of the following sizes PVC switch boards with cover etc. as required. |
| 6 | 75mm x 75mm (3\\" X 3\\") :- |
| 7 | Supplying and fixing of the following sizes PVC conduit(medium gauge) on surface with all accessories etc,as required. |
| 8 | 19/20 mm dia |
| 9 | 25 mm dia |
| 10 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/ surface including connection etc. as required. |
| 11 | 2 x 1.5 sq.mm:- |
| 12 | Supplying and fixing of the following sizes GI (in recess) and plastic (on surface) modular switch boards etc. as required. |
| 13 | 3 module GI switch board:- |
| 14 | 6 module GI switch board:- |
| 15 | 8 module GI switch board:- |
| 16 | 12 module GI switch board:- |
| 17 | Supplying and fixing of the following sizes modular type cover plates for GI/plastic modular switch boards etc. as required. |
| 18 | 3 module |
| 19 | 6 module |
| 20 | 8 module |
| 21 | 2 module |
| 22 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 23 | 6/10 amps one way SP switch (1M) :- |
| 24 | 16/20 amps one way SP switch (1M) :- |
| 25 | 3 pin 6/10 amps socket outlet (2M):- |
| 26 | 3/6 pin 16/20 amps socket outlet (2M):- |
| 27 | 5 step fan regulator (2M):- |
| 28 | Blank plate (1M):- |
| 29 | 20/25 amps single phase motor starter switch (2M):- |
| 30 | Supplying and fixing of the following electrical accessories including necessary connection etc. as required. |
| 31 | Angle/batten holder |
| 32 | Ceiling rose |
| 33 | 3mm thick bakelite sheet |
| 34 | Wiring for Circuit/Sub-main with the following sizes PVC insulated Copper conductor cable (FR) in PVC conduit (medium gauge) recessed in slab/ wall etc. as required:- |
| 35 | 2 X 1.5 + 1 X 1.5 sq mm |
| 36 | 2 X 2.5 + 1 X 1.5 sq mm |
| 37 | 2 X 4 + 1 X 1.5 sq mm |
| 38 | 4 X 6 + 2 X 2.5 sq mm |
| 39 | 4 X 10 + 2 X 4 sq mm |
| 40 | 4 X 16 + 2 X 6 sq mm |
| 41 | Wiring for Circuit/Sub-main with the following sizes of PVC insulated Copper conductor cable (FR) in existing PVC casing capping/ conduit in recess/surface including connection etc. as required:- |
| 42 | 4 x 120 sq.mm:- |
| 43 | Earthing with Copper earth plate 600 mm x 600 mm x 3 mm thick i/c accessories and providing masonry enclosure with CI cover plate Size 12\\"x 12\\" having locking arrangement, along with 20 mm dia (medium gauge) watering pipe including CC work etc as required:- |
| 44 | Supply and fixing of 25mm x 3mm Copper on walls/ floor of the building for horizontal/ vertical network including necessary spacers and porcelain insulators at regular intervals. |
| 45 | Extra for using salt (12 kg) and charcoal (96kg) for plate earth electrode as required. |
| 46 | Supplying and installation of powder coated steel sheet enclosure (MCB DB) suitable for 240/415 volts MCB/Isolator/RCCB (SP/SPN/DP/TP/TPN/FP) complete with necessary bus bar, neutral link, din rail, earth bar etc i/c connection as required. |
| 47 | (2+4)/6 way SPN MCB DB (single door):- |
| 48 | (2+6)/8 way SPN MCB DB (double door):- |
| 49 | 4 way vertical TPN MCB DB suitable for FP MCCB incomer upto 250 amps (Double door):- |
| 50 | Supplying & installation of 10 KA breaking capacity, B/C curve MCB of following ratings in the existing MCB DB including connection as required:- |
| 51 | 6 to 32 amps SP MCB:- |
| 52 | 6 to 32 amps DP MCB:- |
| 53 | 40/50/63 amps TPN MCB:- |
| 54 | Supplying & installation of TP/FP MCCB of following ratings in the existing MCCB enclosure/ panel board including connection etc as required (Ics=100% of Icu with adjustable settings):- |
| 55 | 16 to 100 amps FP MCCB, Breaking capacity 16/18KA (Thermal Magnetic):- |
| 56 | 250 amps FP MCCB, Breaking capacity 36KA (Thermal Magnetic) :- |
| 57 | Supplying and installation of powder coated steel sheet enclosure for 415 volts MCCB (TP/FP) complete with necessary connection etc as required:- |
| 58 | Enclosure suitable for MCCB upto 100 amps:- |
| 59 | Enclosure suitable for MCCB above 100 amps upto 250 amps:- |
| 60 | Supplying and installation of Bus bar chamber of the following ratings and sizes made of steel sheet enclosure with all accessories including necessary connection etc. as required:- |
| 61 | 300 amps 415 volts four strip Copper busbar chamber 4 ways of size (455mmx330mmx120mm):- |
| 62 | 63 amps 415 volts four strip Copper busbar chamber 6 ways of size (455mmx330mmx120mm):- |
| 63 | Supplying and fixing of following surface/recess mounted LED luminaries in powder coated die cast housing complete with high efficiency polycarbonate diffuser and necessary connection etc. as required (with 50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 64 | Surface mounted box type batten suitable for single 18/20 watt integrated LED tube lamp (without lamp):- |
| 65 | Recessed/Surface mounted 1ft x 1ft decorative 16/18 watt LED panel light with integral driver and high quality polycarbonate diffuser:- |
| 66 | Supplying and fixing of following LED Tubes, retrofit bulbs/lamps for LED luminaries including necessary connection etc. as required:- |
| 67 | 18/20 watt LED tube with integral driver and polycarbonate diffuser (50000 burning hours and minimum lumen output of 100lm/watt):- |
| 68 | 9 watt LED retrofit lamp with polycarbonate body and aluminium heatsink :- |
| 69 | Supplying and fixing of following outdoor LED luminaries in powder coated die cast housing complete with heat resistant tempered glass/diffuser including necessary connection etc. as required (50000 burning hours and minimum lumen output of 100 lm/watt):- |
| 70 | 120 watt LED flood light fixture with integral driver and secondary lens (IP 66):- |
| 71 | 60 watt LED street light fixture with integral driver and secondary lens (IP 66):- |
| 72 | Supplying & installation of 300 mm sweep 900 rpm metalic body exhaust fan including connection etc as required (ISI marked) :- |
| 73 | Supplying & installation of shutter for 225/230/300 mm sweep metalic body exhaust fan in the existing hole as required:- |
| 74 | Making different sizes of hole in the wall for fixing of exhaust fan including finishing the same with cement plastering and painting etc as required:- |
| 75 | Supplying & fixing of 1200 mm sweep white color AC ceiling fan capacitor type double ball bearing complete with 300 mm down rod,canopies,shackles, 3nos blades, including wiring the down rod with 2x1.5 sqmm PVC insulated Copper conductor cable(FR) (ISI marked, BEE 1 star/minimum service value 4.0 m3/min/W). |
| 76 | Supplying and fixing of MS frame made of (25mm x 25mm x 5mm) MS angle with necessary support by (40mm x 6mm) MS flat and 12 mm thick marine plywood on top, grouted on wall with 4 nos legs (25mmx25mmx5mm MS angle 20 cm long) finished with red oxide and 2 coat synthetic enamel paint including necessary cc work, mending the damages & painting etc as required:- |
| 77 | Supplying and laying of the following sizes XLPE insulated PVC sheathed aluminium conductor armoured cable with necessary connection etc as required |
| 78 | 3 core 4 Sq mm |
| 79 | Drawing of armoured/un-armoured cable with proper saddling etc as required:- |
| 80 | Excavation of earth for cable trench of 800mm depth & 300mm width in all kinds of soil including back filling of cable trench with the excavated soil with 20cm layer of sand, 3.5 nos bricks per metre for protection including ramming, consolidating to the original shape as per dirrection of Site Engineer :- |
| 81 | Supplying & fixing of G.I. pipe (medium gauge) bracket fabricated at suitable angle for fixing of outdoor light on wall/ RCC base with necessary MS clamp, nut, bolt etc as required:- |
| 82 | 40 mm dia |
| 83 | Supplying and installation of fuse unit kitkat/HRC/HBC of the following ratings in existing main switch/panel board including necessary connection etc as required:- |
| 84 | 200/250 amps kitkat porcelain fuse unit with base(rewireable):- |
| 85 | Supplying & installation of metalic fan clamp box of standard size with 3mm thick bakelite/plastic cover as required:- |
| 86 | Supplying and fixing of M.S Box size (12\\"x8\\"x6\\") made of 3 mm size MS sheet with an arrangement of fittingMCB SP and Neutral link i/c rubber Gasket to the cover, water outlet duct to the below and locking arrangement. Please Enable Macros to View BoQ information |
