|
| 1 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in-Charge.DSR No 14.82 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DSR No. 15.56 Room |
| 3 | Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge DSR No 14.79 |
| 4 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.DSR No 13.91 |
| 5 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in sub structure Cement mortar 1 :4 (1 cement : 4 coarse sand) DSR No. 6.1.1 |
| 6 | 12mm cement plaster or mix 1:4(1 cement: 4 coarse sand) |
| 7 | Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufaclurer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except white lvory Grey Fume Rred Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) jointing with grey cement slurry @ 3.3 kg/sq.m including pointing the joints with white cement and matching pigments etc. complete. DSR No 11.38 |
| 8 | Tile work in skirting, risers of steps and dado up to 2 m hight over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm,including pointing in white cement mixed with pigment of matching shade complete. 8 mm thick DSR No. 11.22.1 |
| 9 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as permanufacturers specifications :Painting Steel/wood work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture DSR No. 13.48.3 |
| 10 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR No. 13.80 |
| 11 | Finishing walls with New work (Two or more coats applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) textured exterior paint of required shade.DSR No. 13.45.1 |
| 12 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :250x10 mm |
| 13 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete :125 mm |
| 14 | Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete |
| 15 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete. |
| 16 | Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. |
| 17 | Providing and fixing G.I. pipes 25 mm dia nominal bore complete with G.I. fittings including treching and refilling DSR No. 18.12.3 |
| 18 | Providing and fixing G.I. pipes 15 mm dia nominal bore complete with G.I. fittings including treching and refilling. DSR No. 18.12.1 |
| 19 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets. 40 mm flush bend overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid. DSR No. 17.3.1 |
| 20 | Providing and fixing water closet squatting pan (Indian type W.C. pan) with 100 mm sand cast Iron P or S trap, 10 liter low level white Vitreous china Orissa pattern W.C. pan of size 580 x 440 mm with integral type foot rest P.V.C flushing cistem, including flush pipe with manually controlled device (handle lever) conforming to IS 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required. DSR No. 17.1.1 |
| 21 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin with 5 litre white P.V.C automatic flushing cistern of 430 x 260 x 350 mm and 340 x 410 x 265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete including painting of fittings and brackets cutting and making good the walls and floors wherever required. DSR No. 17.4.1 |
| 22 | Providing and fixing wash basin with C.I. brackets 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer. DSR No. 17.7A |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) 20 mm nominal dia pipes having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1:00 m spacing This includes jointing of pipes & fitting with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge Concealed work including cutting chases and making good the walls etc. DSR No. 18.8.2 |
| 24 | Providing and fixing PTMT bib cock 15mm nominal bore, 86 mm long, weighing not less then 88 gms of approved quality and colour. DSR No. 18.54.1 |
| 25 | Providing and fixing PTMT stop cock 15 mm nominal bore 86 mm long, weighing not less then 88 gms of approved quality and couler. DSR No. 18.55.1 |
| 26 | Providing and fixing PTMT angle stop cock 15 mm nominal bore weighing not less then 85 gms . DSR No. 18.63 |
| 27 | Providing and fixing mirror of superior glass (of approved quality) and of required Rectangular shape and size 1500 x 450 mm with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. DSR No. 17.32.4 |
| 28 | Providing and placing on terrace(at all floor levels) polyethylene water stroge tank IS : 12701 maked, with cover and suitable locking arrangment and making necessary holes for inlet outlet and overflow pipes but without fittings and the base support for tank. DSR No. 18.48 |
| 29 | Providing and fixing fo C.P. brass toilet peper holder. DSR No. 17.34 |
| 30 | Providing and fixing PTMT liquid soap container 109 mm wide 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and coulur weighing not less then 105 gms. DSR No. 17.71 |
| 31 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fitting arrangement of approved quality and colour weighing not less than 88 gms. DSR No. 17.72 |
| 32 | Add 18% GST Please Enable Macros to View BoQ information |
