|
| 1 | Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm |
| 2 | Providing and fixing white vitrous china pedestal type water closet (Hindware/Cera/Parryware make) (European type W.C Pan) with 100mm PVC P&S trap incl. cutting and making good the walls and floors wherever required |
| 3 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete:18.21.1 White solid plastic seat with lid. |
| 4 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings.550x400 mm |
| 5 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 6 | 18.11.2.2...Providing and fixing stainless steel A ISI 304(18/8) kitchen sink as per I.S 13983 with C.I brackets and stainless steel plug 40mm, including painting of fittings and brackets, cutting and making good the walls wherever required: Kitchen sink without drain board 610x460mm bowl depth 200mm |
| 7 | 18.19..providing and fixing of PVC low level flushing cistern with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete: 18.19.1 10 liter capacity -White |
| 8 | 18.32 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing18.32.2 Rectangular shape 453x357 mm |
| 9 | 19.4...Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: Internal work- exposed on wall15mm nominal bore. 350 rft or 106.70 m |
| 10 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water supply, including all CPVC plain and brass threaded fittings. This includes jointing of pipes and fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge.exposed on wall, including fixing the pipe with clamps at 1.00 meter spacing 15mm nominal bore. 350 rft or 106.70 m |
| 11 | providing and fixing of 15mm nominal bore CP brass short body bibcock (cera,hindware,jaguaar)LMR |
| 12 | providing and fixing of 15mm nominal bore CP brass long nose bibcock (cera,hindware,jaguaar)LMR |
| 13 | providing and fixing of 15mm nominal bore CP angle valve (cera,hindware,jaguaar)LMR |
| 14 | 19.44..Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg |
| 15 | providing and fixing 15mm nominal bore standard CP brass wall mixer in kitchen and bathroom of approved quality (cera,hindware,jaguar)LMR |
| 16 | 18.28.1.1providing & fixing of PVC flexible type waste pipe for sink and wash basinLMR |
| 17 | providing & fixing of CP grating in kitchen and bathroom LMR |
| 18 | providing & fixing of PVC Pipes for drainage ,severage,rain water flow pipe etc including labour &material costs complete job in all heights(LMR) 3\\" dia. 250 rft or 76.21 m |
| 19 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 20 | Engagement of Manpower for miscellenious works. |
| 21 | providing and fixing of PVC water tank lids(cover) to cover the top of water tank |
| 22 | providing and fixing of PVC water tank threaded PVC tank cover |
| 23 | upgradation of of existing manholes including the cost of matrial and labour |
| 24 | engaging trolley for shifting of mulba from site to beyond the muncipality limit including loading and unloading |
| 25 | Providing and fixing pressure pump switch. |
| 26 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape,size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. |
| 27 | Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing and fixing white vitreous china cistern with dual flush fitting, of flushing capacity 3 liter/6 liter (adjustable to 4 liter/8 liters), including seat cover, and cistern fittings, nuts, bolts and gasket etc complete. |
| 28 | Providing and fixing sink mixer with all accessories complete ( Jaquar or equiv) |
| 29 | Providing and fixing of Vanity with looking glass complete with washbasin, single lever mixer and fittings of Jaquar or equivalent. |
| 30 | Supplying and fixing of contrast coloured water proof awning fabric (heavyduty) on existing metal frames of required color as per directions of Engg I/C |
| 31 | Servicing of already installed Chimneys complete job as per the direction of Engineer In Charge |
| 32 | Providing and fixing of wallpaper of required design and pattern of standard make including cutting, wastage, carriage etc . Complete job as per directions of Engg I/C. |
| 33 | Cleaning of terrace/loft water storage tank (inside surface area) upto2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre) (if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account). |
| 34 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-(i)Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water.(iii) Chlorination of RCC internal surface by liquid chlorine.(iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface.(v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 35 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 meters lead. With cement mortar 1:4 (1 cement : 4 fine sand). |
| 36 | Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm). |
| 37 | P/F 0.5 hp pressure pump with attached 8 l presssure tank of standard make and recognized brand including making good the connections and testing, complete job. |
| 38 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood 30 mm. |
| 39 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.With ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws 35 mm. |
| 40 | Renewing glass panes and re-fixing existing wooden fillets: Float glass panes of thickness 4.0 mm (weight not less than 10kg/sqm). |
| 41 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides. |
| 42 | Providing and fixing UV stabilized fiberglass reinforced plastic sheet roofing upto any pitch including fixing with polymer coated ‘J’ or ‘L’ hooks, bolts and nuts 8mm dia. G.I plain/ bitumen washers complete but excluding the cost of purlins, rafters, trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum 0.3% Ultra-violet stabilizer in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets and shall conform to IS: 10192 and IS: 12866. The sheets shall be opaque or translucent, clear or pigmented, textured or smooth as specified. 2mm thick corrugated (2.5\\" or 4.2\\" or 6\\") or step-down (2\\" or 3\\" or 6\\") as specified. |
| 43 | Engaging welder including the cost of welding set and helper for mislaneous welding works at site. |
| 44 | Providing and fixing 3 mm APP superthermaly stp sheet over shalitex stp primer with hot torch treatment and finishing with 2 coats of Aluminium paint.(To be done through certified applicator) 1x35'-0\\"x20'-0\\"= 700.00 sft |
| 45 | Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in Superstructure including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand)including extra for upto five floor. 1x30'-0\\"x3'-0\\"x0'-9\\"= 67.50 cft or 1.91 cum |
| 46 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:3 ( 1 cement : 3 coarse sand) . |
| 47 | Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.Welded. |
| 48 | P/F color coated tile profile GS sheet of required color and fixed with all necessary fixtures as per directions of Engg. I/C. Complete job. |
| 49 | P/L pavit ceramic tiles (size 1'x1') of required color and pattern in driveways as per directions of Engg I/C on 20 mm bed of 1:4 cement mortar. Complete job. |
| 50 | 12 mm cement plaster in 1:6 mix. |
| 51 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 52 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Twp Coats. |
| 53 | Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. |
| 54 | Excavating, supplying and filling of local earth (including royalty)by mechanical transport upto a lead of 5 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 55 | Supplying chemical emulsion in sealed containers including delivery asspecified. Chlorophriphos/ Lindane emulsifiable concentrate of 20%. |
| 56 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment. Treatment of existing masonry using chemical emulsion (Chlorophriphos /Lindane E.C. 20% with 1% concentration)@ one litre per hole at 300 mm interval including drilling holes at 45 degree and plugging them with cement mortar 1:2 (1 cement :2 coarse sand) to the full depth of hole: |
| 57 | Treatment of points of contact of wood work with chemical emulsion Chlorophriphos /Lindane E.C. 20% with 1% concentration (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same. |
| 58 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 59 | 12mm Cement plaster of mix:1 : 4 ( 1 cement : 4 fine sand) |
| 60 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete:1mm thick. |
| 61 | Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. |
| 62 | Finishing walls with water proofing cement paint of required shade: Old work (one or more coats applied @ 2.20 kg/10sqm) complete. |
| 63 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. Wood Work. m |
| 64 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete |
| 65 | Providing and fixing 1st quality ceramic glazed floor tiles conforming toIS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (1 cement: 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 66 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 67 | P/L 8 mm thick laminated wooden flooring of Action tesa make or equivalent on floor including foam sheet underneath and half round moulding on skirting. Complete job. |
| 68 | French spirit polishing, one or more coats on old work. Please Enable Macros to View BoQ information |
