|
| 1 | Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 2 | Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°,landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiralstair cases upto five level including curing but excluding the cost of centring, shuttering,finishing and reinforcement with5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) |
| 3 | Centering and shuttering including strutting, propping etc. and removal of form for: Suspended floors, roofs, landings, balconies and access platforms. |
| 4 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level |
| 5 | Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 7 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, laid on 20 mm thick cement mortar 1:4 (1Cement : 4 Coarse sand), including grouting the joints with white cement and matching pigments etc., complete in all colours, shades, except White, Ivory, Fume Red Brown |
| 8 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08%and conforming to IS:15622 of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1cement :4 coarse sand)including grouting the joints with white cement and matching pigments etc. complete |
| 9 | Providing and fixing of 19mm thick ply including cutting, wastage, fevicol, nails, carriage etc. complete item of superior make (green, century, amulya , orchid) conforming BWP 710...... LMR |
| 10 | Providing and fixing of 1mm thick summica including cutting, wastage, fevicols nails etc. complete (green, amulya, virgo) |
| 11 | providing &fixing of ply 6mm thick ply including cutting wasteage fevicol carriage etc complete item of superior make ( green,century,amulya archid ) conforming BWP 710LMR |
| 12 | Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : Second class deodar wood |
| 13 | Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, allcomplete as per direction of Engineer-in-charge. (Note: -Butt hinges andnecessary screws shall be paid separately(Second Deodar Rate for thickness ofshutter in mm per sqm35 mm) |
| 14 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick 12 mm thick Marine plywood conforming to IS: 710 |
| 15 | .Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): Sal wood |
| 16 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping and sand papering and preparing the surface smooth Including necessary repairs to scratches etc. complete. |
| 17 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick |
| 18 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50 grams/ liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. Two or more coats |
| 19 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work. |
| 20 | CPVC PIPES AND FITTINGSProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot and cold water supply, including allCPVC plain and brass threaded fittings. This includes jointing of pipesand fittings with one step CPVC solvent cement and testing of jointscomplete as per direction of Engineer-in-charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc. 20mm nominal outer dia pipes. |
| 21 | 25mm nominal outer dia pipes. |
| 22 | 15mm nominal outer dia pipes. |
| 23 | External work including trenching, refilling etc. 25mm nominal outer dia pipes. |
| 24 | 40mm nominal outer dia pipes. |
| 25 | 32mm nominal outer dia pipes. |
| 26 | Taking out existing wooden door shutter, repair by cutting, painting etc.and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 27 | Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 liter low level white P.V.C. flushing cistern, including flush pipe with manually controlled device (handle lever), conforming to IS:7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: W.C. pan with ISI marked white solid plastic seat and lid. |
| 28 | Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required. White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests |
| 29 | \\"Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, includingpainting of fittings and brackets, cutting and making good the walls wherever required: White Vitreous China Flat back wash basin size 450x300 mm with single 15 mm C.P. brass pillar tap\\" |
| 30 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. |
| 31 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the walls wherever required : 610x510mm bowl depth 178mm |
| 32 | 470x420mm bowl depth 178mm |
| 33 | providing and fixing of hand jet for flushing standard make LMR |
| 34 | Renewing glass panes, with wooden fillets wherever necessary :14.7.1 Float glass panes of thickness 4.0 mm (weight not less than10kg/sqm) |
| 35 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C waste fittings complete:Flexible pipe. 32mm dia |
| 36 | 40 mm dia |
| 37 | providing & fixing of CP grating in kitchen and bathroom |
| 38 | providing and fixing of 15mm nominal bore CP angle valve (cera,hindware,jaguaar, equivalent) |
| 39 | providing and fixing pillar cock (cera ,jaquar, equivalent)LMR |
| 40 | providing and fixing of pvc connection 45cm |
| 41 | Providing and fixing P.V.C low level flushing cistern with maually controlled device (handle lever) conforming to IS : 7231, with all fittingsand fixtures complete:18.19.1 10 liter capacity -White |
| 42 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps,excluding trenching and refilling etc.:Light. 50mm nominal dia |
| 43 | 40mm nominal dia |
| 44 | 25mm nominal dia |
| 45 | Providing and fixing of brass bib cock of approved quality 20 mm nominal bore |
| 46 | Providing and fixing of G.I. Nipple of approved quality. 12\\"x1/2\\" |
| 47 | 6''x1/2'' |
| 48 | 4''x1/2'' |
| 49 | 2''x1/2'' |
| 50 | 1.5''x2'' |
| 51 | Providing and fixing of Socket half inch |
| 52 | Providing and fixing of Elbow half inch |
| 53 | providing and fixing CP brass shower rose with 15mm or 20mm inlet 100mm dia |
| 54 | Providing and fixing of soap dish holder |
| 55 | Providing and fixing of Towel rod |
| 56 | Repairs to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape raking outjoints and preparing and plastering the surface of the walls completeincluding disposal of rubbish to the dumping ground within 50 meters lead14.1.2 With cement mortar 1:4 (1 cement : 4 coarse sand) |
| 57 | Providing and fixing of waste coupling standard make (wash basin) |
| 58 | Providing and fixing ISI marked oxidized M.S. tower bolt black finish, (Barreltype) with necessary screws etc complete.250x10 mm |
| 59 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25 mm dia |
| 60 | Providing and fixing on wall face un-plasticized Rigid PVC rain waterpipes conforming to IS: 13592 Type A including jointing with seal ringconforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed. 75 mm |
| 61 | 110 mm |
| 62 | Providing and fixing ISI marked M.S. pressed butt hinges bright finished with necessary screws etc. complete :125x65x2.12 mm |
| 63 | Providing and fixing on wall face un-plasticized - PVC moulded fittings/accessories for un plasticized Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion. 75mm |
| 64 | 110mm |
| 65 | Single Tee with door. 75x75x7 mm |
| 66 | 110x110x10mm |
| 67 | Single Tee without door. 75x75x7 mm |
| 68 | 110x110x10mm |
| 69 | Bend 87.5°. 75mm |
| 70 | 110mm |
| 71 | Providing and Fixing of stainless steel door handles 150mm heavy duty of approved make with necessary fittings and fixture complete |
| 72 | Providing and fixing bright finished brass helical door spring (superior quality) with necessary brass screws etc. complete. |
| 73 | Providing and fixing gate valve1.5\\" |
| 74 | Providing and fixing check valve brass 2\\" |
| 75 | Engaging a carpenter to carry works. |
| 76 | Engaging a plumber |
| 77 | Providing and fixing fly proof wire gauze to windows, clerestory windows and doors with M.S Flat 15x3 mm and nuts and bolts complete. Galvanized M.S wire gauze with 0.63 mm dia wire and 1.4 mm aperture on both sides |
| 78 | Unskilled labour engaged for clearing debris from site and shifting it to the loaction for disposal |
| 79 | Providing and fixing of english seat cover |
| 80 | provinding and fixing of cp long nose bibcock heavy ( standard make) |
| 81 | provinding and fixing of cp short body bibcock heavy ( standard make ) LMR |
| 82 | Engaging of trolley for shifting of mulba to a location beyond municipality limit |
| 83 | Providing and fixing of CP brass ball valve of Size. 20 mm |
| 84 | Providing and fixing aluminium work in doors, windows, ventilators, partitions with standard tubular section with dash fastener of required dia and shape and size jointed mechanically including ACP sheet/5mm thick /plain glass/ frosted glass/ laminated board panel complete with hardware fittings, powder coated aluminium, minimum thickness of powder coated 50 micron and conforming to IS 733 & IS 1285 (16 guage) complete job.LMR |
| 85 | Providing and fixing of 5 to 6mm thick super heavy PVC wall panelling with PVC angles/ corners including all accessories/arrangement including cutting wasteage |
| 86 | Providing and fixing of PVC water tank Standard make |
| 87 | providing and fixing of pvc water tank cover threaded standard make LMR |
| 88 | Providing and fixing mirror of size 600mmx400mm of superior size with beveled edge with 6mm thick hard board back fixed to wall with wooden cleats and C.P brass screws and washers complete. |
| 89 | providing and fixing of phase for repair of CP mixer/ bib cocks (plain) |
| 90 | providing and fixing of phase for repair of CP mixer/ bib cocks (disk) |
| 91 | providing and fixing of CP cup for repair of CP mixer/ bib cocks (plain) |
| 92 | providing and fixing of CP cup for repair of CP mixer/ bib cocks (disk) |
| 93 | Engaging a welder along with kit for performing welding repair works |
| 94 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and threading the pipe and making long screws including excavation, refilling the earth or cutting of wall and making good the same complete wherever required. 25 mm nominal bore |
| 95 | Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge |
| 96 | Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in Cement mortar 1:4 ( 1 cement : 4 coarse sand) |
| 97 | Extra for brick work with common burnt clay bricks/cement concrete bricks in superstructure above plinth level upto floor five level |
| 98 | Providing and Fixing of Magnetic catcher |
| 99 | Providing and fixing of sliding channel. |
| 100 | Engagement of skilled mason for repair works |
| 101 | 12mm Cement plaster of mix: 1 : 4 ( 1 cement : 4 fine sand) Please Enable Macros to View BoQ information |
