|
| 1 | Dismantling wall and ceiling any type of board, size or description, fixed in any position or in any thickness, including cover fillets with nails complete all as specified and as directed. |
| 2 | M&L for solid PVC wall lining consisting of 5mm thick prelaminated colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete as per specifications and directed. |
| 3 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC frame complete as specified and directed. |
| 4 | M&L for provding false ceiling of 12mm thick fine fissure board sharped finished mineral fiber acoustic false ceiling tiles with back of the duly sanded and finshed with a coat of protective paint and front duly finished false system of size (600x600) mm having noise reduction co-efficient of 0.55 light reflection of 80% thermal conductivity k=0.057 W/WWC and humidity resistance of 95% fixed to true look PVC die KL -24 suspension system (Hot dipped aglvanised steel section) of exposed T Section consisting of perimeter wall angle of size (24x24) mm of thickness 0.45mm c/c universal main runner of T Shape with double rotary siticing of size (38x25) mm of lenght 1200mm made from 0.33GS steel of lenght 3.60 mtr to be spced at (600x 600)mm size c/c cro runner T shape wtih double rotary siticing of size (30x24)mm of length 1200mm made 0.25 thick GS sheet spaced @ 600mm c/c (600mm x 600mm) size complete all as specified and directed by Engineer -in- Charge. |
| 5 | Taking down cement plaster on brick, stone or concrete surfaces of walls etc including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed by Engr-in-Charge and removing the debris from site to out site MoD Land. |
| 6 | M&L for 10 mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on internal walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equilent. |
| 7 | M&L for 15 mm thick rendering of Ready Mix Mortar of approved make on brick work or concrete surfaces on external walls, finished the surface even and smooth without using extra cement as on wall as whole or in patch etc complete all as specified and as directed. Make- Birla (HIL) or its equilent. |
| 8 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and as directed. |
| 9 | M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/ltr and UV resistance as per IS 15489-2004, alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @1.43 litre/10 sqm over and including priming coat of exterior primer applied @ 0.9 litre /10 sqm over new surfaces complete all as specified and as directed. |
| 10 | Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) and removing the debris from site to out site MoD land complete all as specified and as directed. |
| 11 | M&L for 75mm thick cement concrete (1:3:6) type C2 (using 40mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, including making joints 12 mm wide to the full depth of PCC at every 3 metres and at every change of direction and filling the same with & including bitumen 85/25 and sand in the proportion of (1:3 ) by weight complete all as spcified and as directed. |
| 12 | M&L for 75mm thick PCC (1:3:6) type C2 (using 40mm graded stone aggregate) as in path and paving, finished even and smooth without using extra cement complete all as per specified and as directed. |
| 13 | M&L for 25 mm thick PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in floor, surface finished even and smooth with using extra cement complete all as per specified and as directed. |
| 14 | M&L for PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in surface channel/drain complete all as per specified and as directed. |
| 15 | Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as per specified and as directed. |
| 16 | M&L for chequerred cement concrete tiles (20cmx20cm) x 25mm thick, with grey cement and pigment, set and jointed with grey cement and pointed with coloured cement to match the shade laid over and including 15mm thick screed bed in CM (1:4) complete all as specified and as directed. |
| 17 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. |
| 18 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size exceeding 1.50 Sqm but n. exc 4.0sqm each including cutting holes in walls of appropriate size for insertion of cement concrete blocks for hold fasts complete all as specified and as directed. |
| 19 | Taking down shutter of any discription area n. exc 1 Sqm each complete all as specified and as directed. |
| 20 | Taking down shutters of any description area exc 1 sqm and n. exc 2 sqm each complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 21 | Taking down shutters of any description area exc 1 sqm and n. exc 2 sqm each complete all as specified and as directed. Please Enable Macros to View BoQ information |
