|
| 1 | Taking down cement or cement lime plaster wall and ceiling including in patches, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 2 | M&L Rendering including in patches, 5 mm thick in cement mortar 1:3 on concrete surfaces,Chajjas in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 3 | Material and labour for preparation of new plastered surfaces on ceiling and applying two coats of oil Emulsion distemper over a coat of alkali resistant priming paint all as specified but on ceiling complete all as specified and directed. |
| 4 | M & L Preparation of newly plastered ceiling surfaces and applying three coat of white wash. (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 5 | M&L for rendering 10 mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed. |
| 6 | M&L for 3mm thick (1.5mm thick each in two layer application) wall care putty of old surface of wall incl rubbing down with sand paper to have even and smooth surface complete all as specified and directed. |
| 7 | M & L Preparation of newly plastered wall surfaces and applying two coat of white wash complete (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 8 | M & L Preparation of newly plastered wall surfaces and applying two coats oil bound distemper over a coat of primer complete (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 9 | M & L rendering 15mm thick on fair faces of brick work,concrete or stone masonry surfaces in CM 1:4 with using water proofing compound and finished even & smooth without using extra cement complete all as specified and directed. |
| 10 | M&L Preparing new plastered or unplastered surfaces of walls and applying two coats of cement base paint over a coat of primer (above item shall be applied by the brush not by spray gun) complete all as specified and directed. |
| 11 | M&L for preparing new plaster surfaces of walls applying one coat of weather coat primer and two coats of weather proof acrylic emultion paint all as per manufacturers instructions and directed including 10m height steel scaffolding complete all as specified and directed. |
| 12 | Supply only water proofing compound complete all as specified and directed. |
| 13 | M&L for Preparation of old decorated surfaces of Ceiling spoiled by smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots by scraping and filling undulations with putty and applying one coat of white wash on ceiling surfaces complete all as specified and directed. |
| 14 | M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss,Old nails and efflorescent salts and trading oil and greasy spots by scraping and filling undulations with putty and applying one coat of oil bound distemper (OBD) complete all as specified and directed. |
| 15 | M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss,Old nails and efflorescent salts and trading oil and greasy spots by scraping and filling undulations with putty and applying one coat of white wash complete all as specified and directed. |
| 16 | M&L for Preparation of old decorated surfaces of walls and cornices, spoiled by smoke soot, moulds, moss,Old nails and efflorescent salts and trading oil and greasy spots by scraping and filling undulations with putty and applying one coat of interior emulsion paint complete all as specified and directed. |
| 17 | M&L for preparation of existing treatment on surfaces of wall, chajjas etc in any position washing down with water and cleaning the surface from all loose dirt chalk grease fungi algal flakes etc and applying one coat of weather proof acrylic emultion paint all as per manufacturers instructions and directed including scaffolding complete all as specified and directed. |
| 18 | M&L for Preparation of old surfaces of walls by washing rubbing ,scraping and filling undulations with white cement and applying two coat of exterior emulsion paint Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including primingcoat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and directed. |
| 19 | M&L for Preparation of old surfaces of walls by scraping and filling undulations with putty and applying one coat of cement base paint complete all as specified and directed. |
| 20 | M&L for preparation of old wooden surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 21 | M&L for preparation of old steel surfaces of any description , not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 22 | Taking down shutters only of any description exc 1sqm and n exc 2 sqm each complete all as specified and directed. |
| 23 | Taking down chowkats or frames with shutters without taking off shutters from the frames, area n.exc 1.50 sqm each and removal to store including cutting holes for removal of hold fast complete all as specified and directed. |
| 24 | S & F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm single side prelam PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet reinforced with M S square tubes , S&F in opening as per specification & drawing given in SSR-2004 complete all as specified and directed. |
| 25 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M S tubes for top & bottom rails M S frame shall be covered with heat moulded Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 90 bent edge having a PVC sheet strip of 20 mm width struck in side with solvent cement for stiles and plain colour PVC sheets 5 mm thick for top rail, lock rail & bottom rail on either side & as gap insert for tap rail & bottom rail, paneling of plain colour PVC sheets to be fitted in the MS frame walded/sealed to the stiles & rails with suitable PVC sheet beading and joined to getger with solvent cement supplying & filling in the frame at site as per specification & drawing given in SSR-2020 complete all as specified and directed. |
| 26 | S&F butt hinges type B-12 or (overlay/ self / auto closing hinges ) for cupboard / shelves shutters of size 125 mm complete all as specified and directed. |
| 27 | S&F in repairs aluminium anodised, barrel tower bolts of extruded section and fixed of 150 mm long complete all as specified and directed. |
| 28 | S&F in repairs aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 29 | S&F in repairs extruded aluminium alloy handles150 mm long , fabricated type, anodised complete all as specified and directed. |
| 30 | M&L for Powder coated aluminium section in door frame ,swing door, sliding window and partition walls complete including connecting accessories like allu grill for guard,fittings, glazing clips, handles, pivots etc fixed complete all as specified and directed. |
| 31 | M&L for Powder coated Anodised aluminium door shutters,aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, handle 2 Nos in each door ,anodised alumnium snap beading, screws etc. complete all as specified and directed. |
| 32 | M&L for Powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws complete all as specified and directed. |
| 33 | M&L for Powder coated Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 34 | M&L 9mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed to aluminium door frame complete all as specified and directed. |
| 35 | S & F 5.5 mm thick sheet glass ordinary quality area exc 0.50 Sqm in each pane and glazing for aluminum frame work complete all as specified and directed. |
| 36 | Supply and fixing 100mm long butt hinges extruded aluminum medium weight cold rolled ISI marked complete all as specified and directed. |
| 37 | Supply and fixing 150mm long extruded aluminum handles fabricated type anodized, ISI marked complete all as specified and directed. |
| 38 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and directed. |
| 39 | S&F Precast RCC manhole coverslab of size n.exc 0.46 Sqm area and 40mm thickness,made with cement concrete M20 grade with 8mm dia TMT Reinforcement including removal of broken slab complete all as specified and directed. |
| 40 | S&F in repairs 32 mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 32mm45gms) complete all as specified and directed. |
| 41 | S&F in repairs 40 mm bore waste coupling of PTMT (half or full threaded) (Minimum weight 40mm-60 gms) complete all as specified and directed. |
| 42 | S&F Grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40gms) complete all as specified and directed. |
| 43 | S&F Grating doom round 140 mm size of PTMT. (Minimum weight 50gms) complete all as specified and directed. |
| 44 | Grating square 150 mm size of PTMT (Minimum weight 100gms) complete all as specified and directed. |
| 45 | All as per item above but with waste hole of PTMT. (Minimum weight 100gms) complete all as specified and directed. |
| 46 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 47 | S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 48 | S&F PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed. |
| 49 | S&F in repairs for low density polythelyne (flexible) 32 mm bore pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete as in outlet pipe for WHB etc, complete all as specified and directed. |
| 50 | Taking up or down steel /UPVC water tubing and connections,15 mm bore complete all as specified and directed. |
| 51 | Taking up or down steel /UPVC water tubing and connections, 20 mm bore complete all as specified and directed. |
| 52 | Taking up or down steel /UPVC water tubing and connections, 25-32 mm bore complete all as specified and directed. |
| 53 | Refixing/ fixing only old steel tubing and connections 15 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 54 | Refixing/ fixing only old steel tubing and connections 20 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 55 | Refixing/ fixing only old steel tubing and connections 25-32 mm bore in new or old position (Walls, ceiling, floors, etc.) complete all as specified and directed. |
| 56 | S&F in repairs 15 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe complete all as specified and directed. |
| 57 | S&F in repairs 20 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe complete all as specified and directed. |
| 58 | S&F in repairs 25 mm bore Unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc, any type of pipe complete all as specified and directed. |
| 59 | Cutting, chasing pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves ,lintels etc and cutting chase for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10 cm girth in brick wall complete all as specified and directed. |
| 60 | S&F in repair 15mm bore dia, bib taps, fancy type, chromium plated , caste copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule pressure 15mm bore fixed to pipe complete all as specified and directed. |
| 61 | S&F in repair 15mm bore chromium plated cast copper alloy bib taps fancy type with , screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 62 | S&F in repair fancy type chromium plated stop valves / angle valve, cast copper alloy with crutch or butterfly handles screwed down high pressure, screwed both ends for 15mm bore iron pipe or brass ferrule complete all as specified and directed. |
| 63 | S&F in repair 15mm bore chromium plated cast copper alloy stop valves / angle valve fancy type with , screwed down for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 64 | S & F in repairs 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup ( concealed type ) screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed. |
| 65 | S & F in repairs 15mm bore stop valve, cast copper alloy fancy type chromium plated with long shank and cup ( concealed type ) screwed down, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed. |
| 66 | S&F in repair Pillar tap, cast copper alloy,fancy type with capstan head, chromium plated, screwed down high pressure, with or without lettered ‘Hot’ or ‘Cold’ wih long screwed shanks and fly nuts, screwed for iron pipe and fixed in repairs, 15 mm bore dia of pipe complete all as specified and directed. |
| 67 | Supply and fix in repairs 15 mm size wall mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising bib tap with all connected accessories, fixed complete all as specified and directed. |
| 68 | Supply and fix in repairs 15 mm size wash hand basin mixer, for mixing hot & cold water, cast copper alloy, chromium plated with capstan head comprising single hole bib tap with all connected accessories, fixed complete all as specified and directed. |
| 69 | S & F in repairs 15mm size 2-way Bib cock with single handle and wall flange, Chrome Plating complete all as specified and directed. |
| 70 | S&F towel ring round complete all as specified and directed. |
| 71 | S & F stainless steel tubular towel rail 20mm dia 600 mm long in repair complete all as specified and as directed. |
| 72 | S&F Corner shelf of glass complete all as specified and directed. |
| 73 | S&F glass shelf 60mm complete all as specified and directed. |
| 74 | S&F in repairs Shelf of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 300gms) complete all as specified and directed. |
| 75 | S&F in repair brass chromium plated shower rose 75mm size (dia) with swivel joints including 195mm long brass chromium plated arm with bend 45 degree etc complete all as specified and directed. |
| 76 | S & F in repairs swivel shower for PTMT with shower arm 195mm long with bend of 45 degree 15mm dia (minimum weight 80 gms) complete all as specified and directed. |
| 77 | S&F cardiff health faucet with SS hose and hook complete all as specified and directed. |
| 78 | S&F in repair toilet paper holder of brass chromium plated including screw and chromiun plate brass wooden / plastic cleats complete all as specified and directed. |
| 79 | S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.. |
| 80 | S & F in repair 600 x 450 mm size beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 81 | S&F in repairs 40 mm bore High density polyethylene pipes (HDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 82 | S&F in repairs for low density polythelyne (flexible) pipes (LDPE) of pressure rating 6kgf/cm2 fixed complete to wall or in floors etc. as in outlet pipe for WHB etc. 32mm bore complete all as specified and directed. |
| 83 | S & F in repair Jet spray assembly with all fittingd in EWC complete all as specified and directed. |
| 84 | S & F vitreous china wash basin, white, flat back, size 550 x 400mm with waste fitting of PTMT32mm size,and PVC waste pipe and fixing with new brackets including cutting and pinning in ends of brackets complete FIXED IN REPAIR complete all as specified and directed. |
| 85 | S & F repair vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete (1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishing complete all as specified and directed. |
| 86 | S&F in repairVitreous China wash down water closet pan (pedestal pattern), white (excludin fixing bolts, flushing cistern and flush pipe) with PVC sheet cover & 'P' OR 'S' trap complete all as specified and directed. |
| 87 | S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection 15mm size 450mm long to WC pan complete all as specified and directed. |
| 88 | S&F in repairs Plastic water seat closet cover black/ white closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 89 | S&F in repairs Stainless steel sinks made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers& waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm X 420mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed. |
| 90 | S&F in repairs Stainless steel sink with draining board, made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets, connecting union overall size 915mm X 460mm with bowl size 410mm X 330mm X 160mm complete all as specified and directed. |
| 91 | Demolition of cement conc (un reinforced) in floors / pavings, (Below or above gl) and of any description and in any posting not otherwise specifically provided complete all as specified and directed. |
| 92 | M&L PCC 25 mm thick 1:2:4 type B1using aggregate as in leveling course complete all as specified and directed. |
| 93 | Materials and labour 15mm thick screed bed or bedding layer in CM 1:6 for laying flooring etc complete all as specified and directed. |
| 94 | Materials and labour for 10mm thick screed bed in CM 1:4 for laying of wall tiles/kota stone complete all as specified and directed. |
| 95 | Dismentling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises complete all as specified and directed. |
| 96 | M&L Vetrified ceramic tiles 10mm thick (Square/rectangular) polished light shade area of each tiles n exc 0.36 Sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles all as specified and as directed (Asian, Orient, Somany & Johnson 1st Grade)complete all as specified and directed. |
| 97 | M&L Vetrified ceramic tiles 10mm thick (Square/rectangular) polished light shade area of each tiles n exc 0.36 Sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles all as specified and as directed (Asian, Orient, Somany & Johnson 1st Grade) complete all as specified and directed. |
| 98 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the complete all as specified and directed. |
| 99 | M & L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or oloured cement to match complete all as specified and directed. |
| 100 | M & L 20 mm thick Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 101 | M & L 12 mm thick wall lining Granite (of any type) tiles 12mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. |
| 102 | S&F for mild steel powder coated coloured drapery curtain rods 32mm dia all as specified as in repair complete all as specified and directed. |
| 103 | S&F Fancy type brackets for fixing of curtain rod complete all as specified and directed. |
| 104 | S&F Fancy type gloves for end caps of curtain rod complete all as specified and directed. |
| 105 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 106 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 107 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 108 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors. complete all as specified and directed. |
| 109 | M&L for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and directed. Please Enable Macros to View BoQ information |
