|
| 1 | Supply, delivery, laying testing & commissioning of 33KV (E), XLPE cable having compacted circular staranded aluminium conductor, conductor screening of extruded semi conducting compound, cross linked polythylane (XLPE), insulation screening of the extruded semin conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand alround and protected with bricks on sides and top on surface the cable run shall be fixed on M.S. clamps etc of suitable size or as directed by the E/I. Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respect and as per requirement of the job as per direction of E/IMake - CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI make.(GNIDA SOR-2024/03) |
| 2 | (a) 3CX185 Sqmm. |
| 3 | Supply, Delivery, Installation, Testing & Commissioning of 33KV, following type cable termination kit complete in all respects as required for proper completion of work. (make Raychem, CCI, Frontec) (GNIDA SOR-2024/12) |
| 4 | a. 3CX185 Sq.mm. (indoor type) |
| 5 | a. 3CX185 Sq.mm. (Outdoor type) |
| 6 | a. 3CX300 Sq.mm. (Outdoor type) |
| 7 | S/L of 160mm dia. HDPE pipe for drawing of power cable across the road by drilling of 180mm dia. at 1.0mtr. below the road level thereby doing the work of providing HDPE pipe by Trenchless method PE-63/PN-8, complete in all respect as per direction of E/I (GNIDA SOR-2024/25) |
| 8 | S/F of HDPE pipe 160mm dia. PE-63/PN-4 including required material, T&P etc. complete in all respect including fixing clamp as per direction of E/I (GNIDA SOR-2024/21) |
| 9 | Supply and Installation of Perforated type trays Prefabricated 2.5mm G.I.(Hot Dip Galvanised), 75mm flange height with all accessories such as coupling plates, bends, tees, reducers, coupling nut-bolts etc. of following width. The cost of installation shall include connection, bolting, cutting, etc. The supporting steel for cable trays shall be painted type and Cable trays, accessories and covers shall be painted with one shop coat of red oxide zinc chromate primer and two site coats of aluminium alkyd paint. Complete in all respects as per direction of E I/c. (GNIDA SOR-2024/55) |
| 10 | 150mm width |
| 11 | 300mm width |
| 12 | Supplying, installing by suspension on ceiling, testing and commissioning of following capacity Sandwich Type Rising Mains for use on 3 phase 4 wire 415 volts, 50Hz A.C. supply with metal clad enclosure having IP-54 rating after fixing the tap off boxes and all accessories, made of 1.6mm thick steel sheet duly powder coated in convenient sections complete with 4 Nos aluminium bus bars having current density of 130 A/ sq cm at nominal current rating, necessary joints, elbow joints & expansion joints and bends, fire barrier at each floor, provision of tapping at every metre, adopter box and copper flexible for joints, continuous earthing with 2 Nos aluminium strip of suitable size (one on each side) including, G.I. clamping brackets, suspenders, angle iron bracket, steel fasteners, connecting to earthing system etc. as required |
| 13 | 3200 A 50 KA SC for 1 sec (DSR-2018/3.13.10) |
| 14 | Supply, Installation, Testing, Commissioning of outdoor type 36 KV 1250A vaccum circuit breaker including control panel with structure rated voltage 33/36 KV, number of pole-3, breaking capacity - 25 KA control supply - 24 Volt DC etc. complete in all respect as per direction of E/I. Make- ABB, Shreem, CGL (GNIDA Approved Rates) |
| 15 | S/I/T/C of 36 KV outdoor type line side isolator with earth switch along with suitable structure as per direction of E/I/. Make- Rama, Faraday, Balaji, Vimco (GNIDA Approved Rates) |
| 16 | S/I/T/C of 36 KV outdoor type bus isolator with earth switch along with suitable structure as per direction of E/I/. Make- Rama, Faraday, Balaji, Vimco (GNIDA Approved Rates) |
| 17 | S/I/T/C of 36 KV outdoor type CT ratio (400/200/100/1-1A) with 0.2 accuracy with suitable structure as per direction of E/I. Make- Azad, CGL, Heptacara, vishal (GNIDA Approved Rates) |
| 18 | S/I/T/C of 36 KV outdoor type potential transforer with suitable structure as per direction of E/I. Make- Azad, CGL, Heptacara, vishal (GNIDA Approved Rates) |
| 19 | S/I/T/C of 36 KV PT Junction box. |
| 20 | S/I/T/C of 36 KV CT Junction box. |
| 21 | S/I/T/C of 33 KV tripple feeder control and relay panel numerical type with suitable structure as per direction of E/I. Make- Siemens, Avana, ABB (GNIDA Approved Rates) |
| 22 | S/L of M.S. Flat of size 75x10mm for earthing (GNIDA Approved Rates) |
| 23 | S/F of 33 KV Post insulator with structure. (GNIDA Approved Rates) |
| 24 | Providing complete bay structure with proper jumpering & clamping including wiremash fencing as per direction of E/I. (GNIDA Approved Rates) |
| 25 | Providing, cutting, welding & fabrication of MS Structure of following size MS Channel as per direction of E/I. (GNIDA Approved Rates) |
| 26 | 400x100x8.8 mm |
| 27 | 125x65x8.3 mm |
| 28 | 250x82x9 mm |
| 29 | Supply and Fixing of PG clamp for 3 bolt panther to panther ACSR conductor on pole. complete in all respect, as directed by engineer-in-charge. GNIDA-SOR-2024/78 |
| 30 | Supply & erection of overhead line with ACSR conductor (Dog/Panther) on poles / service bracket including binding etc. complete in all respects. UPPWD-2018/627 |
| 31 | Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing. UPPWD-2018/701 |
| 32 | S/F of XLPE insulated copper un-armoured control cable 1100V grade etc. inlcuding lugs, Ferrul & glands complete in all respects as per direction of the Engineer-in-Charge (Make - CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI) GNIDA SOR-2024/1 |
| 33 | 4CX2.5 Sqmm. (GNIDA SOR-2024/1) |
| 34 | 2CX2.5 Sqmm. (Approved market rate) |
| 35 | 6CX2.5 Sqmm. (Approved market rate) |
| 36 | Supply & fixing of 33KV HV insulating mats confirming to IS 15652-2006. The mats should have been type tested by CPRI or another third party lab of equivalent stature. The mats shall be moisture proof, fire retardant and resistant to acids, alkalies & transformer oil. Complete in all respect, as per direction of E-I/C. (GNIDA SOR-2024/47) |
| 37 | Labour Cess and GST will be paid extra as per govt. orders Please Enable Macros to View BoQ information |
