|
| 1 | Sub-Head : Dismantling and Demolishing |
| 2 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 3 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 4 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 5 | In cement mortar |
| 6 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 7 | Of area 3 sq. metres and below |
| 8 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 9 | Of area 3 sq. metres and below |
| 10 | Dismantling C.I. or asbestos rain water pipe with fittings and clamps including stacking the material within 50 metres lead : |
| 11 | 100 mm dia pipe |
| 12 | Dismantling G.I. pipes (external work) including excavation and refilling trenches after taking out the pipes, manually/ by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer-in-charge : |
| 13 | 15 mm to 40 mm nominal bore |
| 14 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 15 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. |
| 16 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 17 | Sub-Head : Earth Work |
| 18 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 19 | All kinds of soil. |
| 20 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 21 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 22 | Sub-Head : Concrete Work |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 24 | 1:2:4 (1 Cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 40 mm nominal size derived from natural sources). |
| 25 | Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer’s specification. |
| 26 | Sub-Head : Reinforced Cement Concrete |
| 27 | Providing, hoisting and fixing above plinth level up to floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but, excluding cost of reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 28 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 29 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 30 | Sub-Head : Masonry Work |
| 31 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 5.0 in foundation and plinth in: |
| 32 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 33 | Sub-Head : Wood and P.V.C. Work |
| 34 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 35 | Sal wood |
| 36 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) |
| 37 | Kiln seasoned and chemically treated hollock wood |
| 38 | 35 mm thick shutters |
| 39 | 30 mm thick shutters |
| 40 | Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 41 | 250x10 mm |
| 42 | 200x10 mm |
| 43 | 150x10 mm |
| 44 | Providing and fixing aluminium handles ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 45 | 100 mm |
| 46 | 75 mm |
| 47 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer-in-Charge. |
| 48 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. |
| 49 | 30 mm thick plain PVC door shutters. |
| 50 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 51 | Marine plywood conforming to IS: 710 |
| 52 | Sub-Head : Aluminium Work |
| 53 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : |
| 54 | For fixed portion |
| 55 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 56 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately). |
| 57 | Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) |
| 58 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): |
| 59 | With float glass panes of 4.0 mm thickness (weight not less than 10 kg/sqm) |
| 60 | With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) |
| 61 | Sub-Head : Steel Work |
| 62 | Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 63 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 64 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 65 | Sub-Head : Flooring |
| 66 | Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. |
| 67 | 40 mm thick with 20 mm nominal size stone aggregate |
| 68 | Sub-Head : Roofing |
| 69 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 70 | (i)Single socketed pipes. |
| 71 | 110 mm diameter |
| 72 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 73 | Single tee with door |
| 74 | 110x110x110 mm |
| 75 | Bend 87.5° |
| 76 | 110 mm bend |
| 77 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. |
| 78 | 110 mm |
| 79 | Sub-Head : Water Proofing |
| 80 | Grading roof for water proofing treatment with |
| 81 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) |
| 82 | Cement mortar 1:4 (1cement : 4 coarse sand) |
| 83 | Sub-Head : Finishing |
| 84 | 12 mm cement plaster of mix : |
| 85 | 1:4 (1 cement: 4 fine sand) |
| 86 | 15 mm cement plaster on the rough side of single or half brick wall of mix : |
| 87 | 1:4 (1 cement: 4 fine sand) |
| 88 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 89 | Old work (one or more coats) |
| 90 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. |
| 91 | With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre. |
| 92 | White washing with lime to give an even shade : |
| 93 | Old work (one or more coats) . |
| 94 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 95 | One or more coats on old work. |
| 96 | Sub-Head : Repairs to Buildings |
| 97 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. |
| 98 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 99 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 100 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 101 | Dismantling 15 to 40 mm dia G.I. pipe including stacking of dismantled pipes (within 50 metres lead) as per direction of Engineerin-Charge. |
| 102 | (a) Internal Work- Exposed on wall |
| 103 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 104 | Sub-Head : Sanitary Installations |
| 105 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 106 | Orissa pattern W.C. pan of size 580x440 mm |
| 107 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 108 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 109 | 10 litre capacity - White |
| 110 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 111 | White solid plastic seat with lid |
| 112 | Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : |
| 113 | Flat back wash basin of size 550x400 mm. |
| 114 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 115 | Semi rigid pipe |
| 116 | 32 mm dia |
| 117 | Flexible pipe |
| 118 | 32 mm dia |
| 119 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 120 | Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms. |
| 121 | Sub-Head : Water Supply |
| 122 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 123 | 20 mm nominal outer dia. Pipes. |
| 124 | 25 mm nominal outer dia .Pipes. |
| 125 | 40 mm nominal outer dia. Pipes. |
| 126 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge : External work |
| 127 | 40 mm nominal outer dia. Pipes. |
| 128 | 50 mm nominal outer dia. Pipes. |
| 129 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 130 | 45 cm length |
| 131 | 15 mm nominal bore |
| 132 | Providing and fixing PTMT bib cock of approved quality and colour. |
| 133 | 15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 134 | Providing and fixing PTMT stop cock of approved quality and colour. |
| 135 | 15 mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 136 | Providing and fixing PTMT pillar cock of approved quality and colour . |
| 137 | 15mm nominal bore, 107 mm long. Weighing not less than 110 gms. |
| 138 | Cutting holes up to 30x30 cm in walls including making good the same: |
| 139 | With common burnt clay F.P.S. (non modular) bricks. |
| 140 | Sub-Head : Market Rate Items |
| 141 | Providing & fixing PVC Water tank cover approved quality all complete as per the direction of EIC. |
| 142 | Uprooting/Removing trees and plants from roof and walls of building upto any height either by physically uprooting or by pressure spraying suitable herbicide solution like GLYPHOSATE 41% SL (Trade name GLYPHO STAR) of Vedic Agro Science PVT. Ltd or other equivalent product with all due precautions on the entire plant organs as per company's recommendations and insructions including making good the damages caused with cement plaster 1:4 or cement concrete 1:2:4 as needed etc. all complete. The rate includes all materials, labour, T&P & incidentals etc. complete but excluding the cost of scaffolding, if applicable, which will be paid for separately. |
| 143 | Providing & fixing \\"S\\" or \\"P\\" trap including dismantling sorrounding concrete area and repalciing with new PVC trap with sealing of gap/joint with mixture of white cement and adhesive made of Dr. fixit i/c removal of rubbish, clay debrishes, sludge deposit and making top finish with concreting etc all complete as per direction of E.I.C. (a) For Bath & Kitchen trap. |
| 144 | Providing & erecting single scaffolding system on the external side of building upto three storey height made of best quality bamboo ballies @ 1.5 m centre to centre in both directions including bracing & stiffening as required. |
| 145 | Shifting and re-fixing of scaffolding materials for removing trees from the external walls and roofs of staff Qtrs. up to height about 12.00 mtr.as per the direction of E-I-C. |
| 146 | Providing and fixing PVC MTA/FTA at repairing with new PVC pipe including cutting and threding the pipe and making good all complete as per the direction of E-I-C. |
| 147 | 20 mm dia PVC MTA/FTA |
| 148 | 25 mm dia PVC MTA/FTA |
| 149 | 40mm dia PVC MTA/FTA |
| 150 | 50mm dia PVC MTA/FTA |
| 151 | Providing and fixing PVC union in New PVC pipe including cutting and threding the pipe and making good all complete as per the direction of E-I-C. |
| 152 | 20 mm dia pvc Union |
| 153 | 25 mm dia pvc Union |
| 154 | 40mm dia pvc Union |
| 155 | 50mm dia pvc Union |
| 156 | Supplying & engaging unskilled labour along with T&P for cleaning of roof terrace , chajja, rain water pipe mouth, drains & cleaning of bushes ,jungles etc. as & when required and as per direction of Engineer-in-Charge. |
| 157 | Easing and adjusting of Door/window shutter for free movement of the shutter by making necessary repairs to shutter & frame all complete per direction of Engineer-in-charge. |
| 158 | Labour charges for removing & refixing of window Grill for repairing of windows etc. as per direction of Engineer-in-charge. |
| 159 | Providing & fixing SWR URPVC soil, waste & vent pipes of approved make conforming to IS:13592 (Type-B) including jointing of pipes & fittings with rubber (seal) ring & one step UPVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer-in-Charge. External work |
| 160 | 110 mm |
| 161 | Providing and laying under ground unplasticised Rigid PVC SWR pipes conforming to IS : 13592 Type B, including jointing with seal ring conforming to IS : 5382 or with solvent cement & testing of joints etc all complete as per direction of Engineer-in-charge. Trenching & refilling of excavated soil to be paid extra. (a) Single socketed pipes. (i) 110 mm dia |
| 162 | Cleaning of choked manhole chambers including removing the waste & sludge deposits and flushing of sewer line between manholes with sufficient water while rodding with split bamboo etc. all complete as per direction of Engineer-in-Charge. |
| 163 | Removal/stopage of water leaking from the face of trap and rain water pipe at roof top by sealing of gap/joint with mixture of richer propertion of cement mortar and adhesive made of Dr. fixit i/c removal of rubbish, clay debrishes, sludge deposit etc as per direction of E.I.C. |
| 164 | Providing & fixing PVC ball valve with handle of approved quality in existing pipe line including removing the damaged valve etc. all complete as per the direction of Engineer-in-Charge. |
| 165 | 25 mm dia pvc gate valve |
| 166 | 40 mm dia pvc gate valve |
| 167 | 50 mm dia pvc gate valve |
| 168 | Credit for taking into possession unserviceable dismantled GI / CI pipes & fittings. |
| 169 | Old damaged iron grills/GI / CI pipes & fittings. |
| 170 | Credit for taking away unserviceable recovered water supply fittings / fixutures as is where is : |
| 171 | Unserviciable Brass Bib/stop cocks/pillar tap |
| 172 | Credit for taking into possession unserviceable damaged PVC cistern. Please Enable Macros to View BoQ information |
