|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8121/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: REPAIR TO ROOF SLABS, ROOF SHEETS, ROOF TILES, VALLEY GUTTERS, FALSE CEILING AND OTHER MISC B/R WORKS OF OTM / MD ACCN BLDGS AT MH / MD AREA OF AGE B/R - II UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Dismantling Asbestos cement sheet (Corrugated/Semi-corrugated etc.) in roof covering complete all as specified and as directed. |
| 3 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc and making good existing disturbed walls/surfaces with CM 1:4 or PCC 1:2:4 complete all as specified and as directed. |
| 4 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed. |
| 5 | S&F in repair rolled mild steel sections as in roof trusses, (framed), trussed purlins, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat section) including distance pieces, cleats confirming to Fe-410-W (grade E-250 quality 'A') complete all as specified and as directed. |
| 6 | M & L preparation of new steel surfaces description over 10 cm in width or girth applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 7 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 8 | M&L Weather boarding of 2nd class H.W of 20mm to 25mm thick and rebated of thick edge to give 20mm lap and fixed with screws/nails including one coat primer and two coat synthetic enamel paint complete all as specified and directed. |
| 9 | Dismantling single layer mangalore pattern or similar tiles laid dry in roofing complete all as specified and as directed. |
| 10 | M & L roof tiles mangalore pattern interlocking at side joints laid dry complete all as specified and directed. |
| 11 | Taking down portions of single layer mangalore pattern or similar tiles laid dry in roofing and refixing after necessary repairs with interlocking at side joints, laid dry complete all as specified and directed (NOTE : If any tiles damaged, supply of tiles will be paid under the respective Item here in after ) complete all as specified and as directed. |
| 12 | Supply only roof tiles mangalore pattern interlocaking side joints laid dry complete all as specified and as directed. |
| 13 | S&F in repair 0.80 mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutter, drip and straight flashing (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed. |
| 14 | S&F for MS Framed work as in Flat iron supports to hold the valley gutters of rain water etc. with ends shouldered and/or riveted and similar work conforming to Fe.290.Gde-E-165 including taking down complete all as specified and directed. |
| 15 | Dismantling timber scantlings 40 Sq cm and over in section in any position in framed work complete all as specified and as directed. |
| 16 | M & L for 2nd class hard wood, clean sawn, in scantiling timber fixed with nails complete all as specified and as directed. |
| 17 | Dismantling wall and ceiling boards (fibre, pulp, insulation,etc.) or insulation boards/slabs/blankets any thickness, incl cover filltets and grids and S & F in true horizontal level false ceiling system, The snap grid shall be of hot dipped galavnised steel sections exposed suface with precoated capping, main tee of size 24x32mm at every 1200mm c/c and cross tee of size 24x27mm (1200mm & 600mm long) at every 600mm c/c and wall angle of size 19x19mm fixed to perimetere wall, as per manufacturer's instructions, grid to be suspended at every 1200mm c/c in both directions by using 3mm dia pre-straightened GI wire at every 1200mm interval at the main tee supported from existing RCC slab fixed with Metal dash fastener including provision of 4mm thick white colour textured designer cement ceiling board (V board) of size 595 x 595 mm fixed with screws/clips complete all as per manufactureres instructions andcomplete all as specified and directed. |
| 18 | S&F in repair Anodised aluminium snap grid frame work by using pre-straightened GI wire including taking down and refixing old false ceiling panels complete all as specified and directed |
| 19 | S&F in reapr 110 mm PVC (SWR) pipes single socket length fixed as spouts on roof including cutting holes in brickwork/stone masory/concrete surface and making good with rich cement mortar and sealed with bitumen complete all as specified and directed. |
| 20 | M&L for Cleaning of roof/ terraces (non accessible) including removal of dirt, mud, debris, shrubs, grass (if any) etc. and disposing off the waste outside of cantonment complete all as specified and directed. |
| 21 | Disconnecting existing tanks of any capacity 500 or 1000 or 2000 ltrs, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position after laying of WPT etc. complete all as specified and directed. |
| 22 | M&L cement concrete 1:2:4 type B0 (using 12.50mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges mixed with water proofing compound at 200ml per bag of cement and self curing admixures to prefevent leakages and seepages, finishing the surface even and smooth without using extra cement complete all as specified and directed |
| 23 | Demolition of cement concrete (Un-reinforced) in roof n exc. 15cm thick incl removing of existing felt and removal of debries complete all as specified and directed |
| 24 | M&L for PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate and WPC) as in roof padding followed by 14 days water curing with ponding complete all as specifed and directed. |
| 25 | Cutting out V - grooves in plaster / masonary / concrete and inserting the waterproffing membrane and making good in CM 1:3 complete all as specified and directed. |
| 26 | M&L screed bed or bedding layer 10 mm thick CM 1:4 for laying floor finishes finished even and smooth without using extra cement with IWPC (IWPC measured separately) as in roof slabs complete fine aggrigate used natural river sand all as specified and directed. |
| 27 | Supply only integral water proofing compound complete all as specified and as directed. |
| 28 | Supplying and applying single component AP Smart care PU Magnum, Zero VOC, elastomeric pure polyurethane membrane free from bitumen and tar, APL Smart Care PU Magnum with minimum elongation of 350%, solid content of 85%, Tensile strength of >2.5Mpa, crack bridging capacity of 3mm and Shore hardness of > 60. The system consists of applying the PU Magnum US waterproofing treatment @ 2 kg/sq.m. in two coats. over a one coat of primer with Solvent Based HFP 130/120/Equivalent @ 200 Gms/Sqm incl surface preparation, complete removing of existing roof treatment/ tar felt and cleaning the entire surface with grinding and removing the loose mortar, dust particles & making the surface sound enough, addressing the cracks by making V groove & if any surface imperfections are treated with APL SC Repair Polymer mixed with neat cement in 1:1 proportion. Treating all construction joints, coving/angle fillet: The coving shall be done on all sharp edges and on the terrace surface to avoid water stagnation. The coving of size (50mm X 50mm) should be done by Smart care Repair polymer mixed @5% of weight of cement, in 1:4 ratio of cement and sand across the joints area of slab and parapet wall, bore packing all the pipes are made rough by apply a bond coat with APL Smart Care Multi-Purpose Polymer along the periphery of the pipe and sand sprinkling over, pipes to be placed inside the core cut areas appropriately. Grouting the gaps between the pipes and core cut by Smart Care General Purpose Grout after fixing an effective leak free shuttering.Note : 1) Contractor shall give guarantee for 10 years for the treatment and a sum equal to 2.5% of the quoted rate will be retained in Final Bill towards security deposit for period of 10 years.2) Alternatively, Contractor may submit FDR in favour of GE Golconda for a period of 10 year towards security deposit. |
| 29 | M&L for APP based polymeric membrane minimum weighing 3Kg/sqm and minimum 3 mm thick reinforced with polyster non wove fabric (weight not less than 150 gms/sqm laid over primed surface including bitumnious primer conforming to IS -3384 applied @ 0.3 ltrs/sqm by forced application over finished with one coat of aluminium paint @ 100 ml/Sqm, 10 cm overlap fused uniformly by LPG torch flame, including rendering 10mm thick in cm 1:4 on concrete surfaces of roofs, parapet etc. finishing to surfaces even and smooth without using extra cement and provinding necessary slope with using WPC @ 2% by weight of cement complete incl taking down existing froof treatment and cement plaster of any description, roughing, preparing the surface by cleaning the surface with wire brushing scrubbinbg down with water to receive new treatment complete all as specified and directed. (NOTE : Supply of WPC will be paid under the respective Item) Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
