|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each complete all as specified and directed. |
| 4 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed. |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises,complete all as specified and directed. |
| 6 | Demolition of cement concrete (un-reinforced) of any description and in any position not specifically provided for, complete all as specified and as directed. |
| 7 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for( reinforcement cut as required to facilitate demolition) and rubbish off the premises, complete all as specified and directed. |
| 8 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified & directed. |
| 9 | Dismantling of fencing, wire mesh of any type and in any position any description and removal complete all as specified and directed. |
| 10 | Dismantling of plain or corrugated steel sheeting any gauge, thickness including Nainital or similar pattern roof covering, and removal of rubbish complete all as specified and directed. |
| 11 | Dismantling of brick work or stone masonay built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles and removal of debris/rubbish off the premises etc complete all as specified and directed. |
| 12 | Taking up or down steel tubing 15mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 13 | Taking up or down steel tubing 20mm dia and connections, including cleaning for refixing or removal to store, complete all as specified and as directed. |
| 14 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories), complete all as specified and as directed. |
| 15 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 16 | Brick work with fly ash (Old Size bricks) sub class 'B' bricks straight or curved on plan, exceeding 6m mean radius with old size bricks, built in cement mortar 1:6, complete all as specified and as directed. |
| 17 | 5mm thick cement plaster in CM 1:4 on brick masonary of brick work surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 18 | 10mm thick cement plaster in CM 1:6 on brick masonary of brick work surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 19 | 15mm thick cement plaster in CM 1:4 on brick masonary of brick work surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 20 | M&L for 12mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement including taking down of existing plaster of any description and removal of rubbish complete all as specified and as directed.complete all as specified and as directed.Note: WPC shall be measured and paid for separately. |
| 21 | Supply only liquid water proofing compound, complete all as specified and directed. |
| 22 | S&F Box type Steel windows and ventilators comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire mesh and glass panes shall be measured and paid separately) with side hung shutters with steel handle and steel peg stay dovetailed or welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles, tarred hold fasts, PCC blocks (1:2:4 type 12.50mm graded crushed stone aggregate) including two coats of synthetic enamel paint over a shop coat of red oxide primer etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete all as specified and directed. |
| 23 | Pressed steel frames for doors/windows of size size 125x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and including two coats of synthetic enamel paint and making good to disturbed area in same finish, complete all as specified and directed. |
| 24 | Pressed steel frames for doors/windows of size size 105x60 mm (1.25mm thick MS sheet) with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, duly filling of cement concrete 1:3:6 type C-0 (using 12.50 mm graded crushed stone aggregate) to back of chowkhats, with a shop coat of red oxide primer and including two coats of synthetic enamel paint and making good to disturbed area in same finish, complete all as specified and directed. |
| 25 | S&F Solid PVC door frame of size 50 x 47 mm made out of 5mm wood grain printed PVC sheet & edges shall be painted to match with printed sheet reinforced with MS square tube, supplying and fixing in opening as per specification, complete all as specified and directed. |
| 26 | Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification, complete all as specified and as directed. |
| 27 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made, plain framed, panelled shutters (one panel only) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneers on both faces, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated, fitted to chowkats, complete all as specified and directed. |
| 28 | 35mm thick, 2nd class hardwood (Sal/ Hollock) factory made glazed and skeleton shutters, open rebated and prepared to receive glass or gauge,etc. with sash bars, edges of framing plain, chamfered or rounded, fitted with cut & mitred beads for securing gauge sizes of members of shutters as specified in SSR Part-I Section-8, clause 8.24 (a) for door shutter supplying and fitted to chowkats, complete all as specified and directed. |
| 29 | 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 30 | 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 31 | 150mm long, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 32 | S&F Mild steel barrel tower bolts length 150mm, stove enameled black with bright bolts complete all as specified and directed. |
| 33 | S&F Mild steel sliding door bolts 250mm long, stove enameled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on sliding and two on staple plate complete all as specified and directed. |
| 34 | 150 mm mild steel helical door spring for door closer, complete all as specified and directed. |
| 35 | S&F Peg set of Six powder coated fixed with chromium plated brass screws and wooden and plastic cleats (min wt 190 gms) |
| 36 | 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 37 | S&Fin repair galvamosed mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm fixed with tinned tacks, or galvanized wire staples complete all as specified & directed. |
| 38 | 100mm bore PVC waste and vent pipes, sand cast, in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe wirh fittings complete all as specified and directed. |
| 39 | 75mm bore PVC waste and vent pipes, sand cast, in any length with or without ears with cement joints, fixed to walls with all fittings including taking down unservicable pipe wirh fittings complete all as specified and directed. |
| 40 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 41 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified and directed. |
| 42 | Rolled mild steel in roof trusses (framed),trussed ,purlins,crane girders,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc., conforming to Fe-410-W (Gde-E-250) quality-A, complete all as specified and directed. |
| 43 | MS TMT bars 10mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 44 | MS TMT bars 6-8mm dia and over cut to length, bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with and including mild steel wire (annealed) not les than 0.9 mm dia or securing with clips quality conforming to complete all as specified and directed. |
| 45 | S&F Frame work such as door or gates etc, including hooks, hold fast, locking, hanging arrangement, fastening and fixing posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc. complete to similar work conferming to fe-290 Gde E-165 complete all as specified and directed. |
| 46 | S&F chain link fencing of oblong wire mesh size 100x100mm with weight not less than 4 Kg/Sqm including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire etc and fixed with fencing posts complete all as specified and directed. |
| 47 | All as per Srl Item No 46 above but fixing only. |
| 48 | Repair and making easy (For smooth functioning, incluiding replacing fittings and greaseing) of Steel rolling shutters including all fixture complete all as specified and directed. |
| 49 | M&L for Welding in repairs exc 2.5cm but n.exc 5cm in length |
| 50 | S&F expanded metal exc 4Kg cut ot length bent to shape required an tying with and including annealed mild steel wire not less than 0.9mm dia all fixing with galvanised steel stapple fixed to steel or wood members laid in any position including closing after filling complete all as specified and directed. |
| 51 | M&L for 100mm thick PCC type B-1, 1:2:4 ( using 20mm graded crushed stone aggregate) as in Path/ hard standing/ Flooring Concrete liad in alternate panels & brooming the surface for depth 2-3 mm etc complete all as specified and directed. |
| 52 | PCC 1:2:4 type B-1 (using 20mm graded stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating including necessary formwork, complete all as specified and directed. |
| 53 | Reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in slabs, kitchen slabs supported on walls, beams and columns, in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.Note :- Reinforcement shall be measured and paid seperately under respective items. |
| 54 | PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in plinth protection 75mm thick laid in slope finished even and fair including making joints not more than 2.5 m (or as directed) and at corner, filled with bitumen 85/25 and sand in ratio 1:2 by weight complete all as specified and directed. |
| 55 | M&L for 100mm thick lean PCC 1:3:6 type C-2 using 40mm graded crushed stone aggregate in sub base finished complete all as specified and directed. |
| 56 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.16 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4, complete all as specified and directed. |
| 57 | Glazed ceramic coloured tiles 4500mm x 350mm x 7mm thick as in vertical surfaces such as skirting dado etc set and jointed joint free in neat cement slurry, pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 to receive tiles, complete all as specified and directed. |
| 58 | Double charged vitrified tiles 8-10mm thick, light shade (square/rectangular) polished, area of each tiles not exceeding 0.18 sqm as in floors etc. set and jointed joint free in neat cement slurry and pointed in white or coloured cement to match and including 10 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 59 | M&L for Machine cut kota stone slab18-20mm thick in riser of steps, skirting, dado and pillar over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade, mirror polished complete over and including 10 mm thick screed bed or bedding layer of mortar in CM 1:4 complete all as specified and as directed. |
| 60 | M&L for Machine cut kota stone slab flooring 18-20mm thick over cement screed bed or bedding layer of cement mortar 20mm thick in CM 1:6 bfor laying floor finishes base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 61 | M&L for factory made cement concrete cloured chequered tile of size 300x300x25mm machine pressed (using vibro compaction method) with 3mm to 5mm thick topping in white cement and non fadeble glossy pigment (using rubberised moulded, glossy finish) set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:4) etc complete all as specified and directed. |
| 62 | M&L for 80mm thickness M-40 grade Machine pressed precast concrete factory made interlocking paver block confirming to IS-15658-2006 (topping thickness not less than 5mm thick with white cement and colour pigment non fadable epoxy coating) complete all as specified & directed. |
| 63 | 25mm thick sand cushion for interlocking paver block including watering and consiladation, complete all as specified and directed. |
| 64 | Steel water tubing, 15mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed |
| 65 | Steel water tubing, 20mm bore, galvanised, \\"medium grade\\" with all fittings and fixtures and short lengths, fixed to wall and ceiling or laid in floor, complete all as specified and directed. |
| 66 | 20mm dia ball brass valves, high pressure with aluminium rod & high density polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed in repair, complete all as specified and directed. |
| 67 | S&F in repair 15mm bore bib tap, long nose, fancy type chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule (fixed in repairs),complete all as specified and directed. |
| 68 | S&F in repair 15mm bore stop valve/angel valve, chromium plated cast copper alloy, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 69 | S&F in repair 15mm bore concealed type stop valve/angel valve, chromium plated cast copper alloy with long shank and cup, screwed down, high pressure with crutch or butter fly handle, screwed both ends for iron pipe or union (fixed in repairs), complete all as specified and directed. |
| 70 | 15mm bore pillar tap, copper alloy with capstan head, chromium plated screwed down high pressure, with or without lettered hot/cold with long screwed shanks and fly nuts screwed for iron pipe (fixed in repairs), complete all as specified and directed. |
| 71 | Supply, fixing, jointing and testing, 20mm bore gun metal globe or gate valve with iron wheel head screwed head both for iron pipe & fixed in repair, complete all as specified and directed. |
| 72 | S & F in repair vitreous china, wash hand basin, white, flat back, of size 550mmx400mm with brackets including cutting for and pinning in ends of brackets, complete all as specified or erecting stand including 32mm full threaded waste coupling and 32mm PVC waste pipe, complete all as specified and directed. |
| 73 | S & F in repair vitreous china squatting pan water closet, orissa pattern, size 580x440mm white with integral foot rests (excluding flushing cistern and flush pipe) including cast iron 'P' or 'S' trap, front or back inlet and foot rests, any pattern including cement concrete bedding, complete all as specified and directed. |
| 74 | S & F vitreous china wash down water closet pan \\"Pedestal\\" coloured including fixing bolts etc including PVC seat cover white with flat bottom including MS, CP or aluminium anodised hinge devices & making good to floor in cement mortar M-15 (1:2:4) type B-1 (using 20mm graded crushed stone aggregated, complete all as specified and directed. |
| 75 | S & F in repair 10 litre capacity PVC valveless, low level, synphonic action type, flushing cistern, with inlet, ball valve, float valve, handle including brackets including 32mm dia PVC flush pipe of suitable size and making necessary connections to water supply pipe line and jointing to WC, complete all as specified and directed. |
| 76 | PVC connection 15mm size with PTMT nuts at both ends of length 450mm for hot and cold water, complete all as specified and directed. |
| 77 | 32mm dia PVC waste pipe for wash hand basin, urinal and kitchen sinks, fixed in repair, complete all as specified and directed. |
| 78 | Rotational moulded polythylene 500 litres capacity water storage tank (Cylindrical vertical with closed top), 3 layer hoisted and fixed in position including 20mm brass ball valve high pressure with brass rod & high density plastic ball including dismanting of water tanks of capacity exc 250 ltrs but not exc 500 ltrs and removing to store, complete all as specified and directed., complete all as specified and directed. |
| 79 | Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges (fixed in repair), complete all as specified and as directed. |
| 80 | 125mm size brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe of 15mm dia or union, complete all as specified and as directed. |
| 81 | 600 mm x 450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick AC building board or BWP commercial plywood and fixed to wooden plugs/PVC rawl plug with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 82 | S&F PVC shelf of PTMT fixed with and including chromium plated brass screws and wooden and plastic cleats ( min wt 300 gms) complete all as specified & directed. |
| 83 | S&F in repair 100mm dia stainless steel grating, complete all as specified and directed. |
| 84 | 110mm bore dia PVC (SWR) pipes, single socketed, in any length with rubber ring joints, fixed to walls, complete all as specified and directed. |
| 85 | 110mm bore dia PVC (SWR) bends, complete all as specified and directed. |
| 86 | Preparation of new or previously untreated steel surface any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 87 | preparation of old painted steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 88 | preparation of old painted steel or iron surfaces (Steel Rungs, Ladders, Railings) of any description, not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 89 | Preparation of new plastered surfaces of wall and applying three coats of white wash,complete all as specified and directed. |
| 90 | Preparation of new plastered surface of wall and appying two coats of cement base paint mixed with silicon based water repellent compound over a coat of primer by roller/brush including curing complete all as specified & as directed. |
| 91 | Preparation of new plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coa of chalk whiting complete all as specified and directed. |
| 92 | M&L for preparation of old wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 93 | Preparation of new wooden surfaces of any description not otherwise described, exc 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 94 | Writing letter or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete. The colour of paint and dimension of letter shall be used as approved by the Engr-In-Charge. |
| 95 | Writing Stops, commas, short lines, dashes, hyphens, brackets etc. The colour of paint and dimension of characters shall be used as approved by the Engr-in-Charge. Please Enable Macros to View BoQ information |
