|
| 1 | M&L for Preparation of old decorated surfaces of ceilling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling complete all as specified and directed. |
| 2 | Mateirial & labour for Preparation of old decorated surfaces on walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed. |
| 3 | M&L for Preparation of old decorated surfaces of wall or ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks including over by applying white cement base putty in patches as required and one coat of oil bound distemper all as specified and directed. |
| 4 | M&L for complete removal of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails and applying two coat of oil bound distemper over & inculding a coat of white cement base putty compelet all as specified and directed. |
| 5 | M & L for preparation of old decorated surface of wall including brooming scrapping down, smoke spot, mass efflorescent, treding oil, greasy spots and stopping nail marks including over by applying white cement based putty in patches as required and applying two coats of exterior weather proof water base emulsion paint on wall all as specified and as directed. Make :- Asian - Apex Ultima (Finish high sheen), Berger - weather coat long life (finish - high sheen), Dulux - Weather shield Max or equivalent as approved by GE |
| 6 | M & l for applying 1mm thick waterproofing wall putty for smooth finish on prepared surface as per item No 5. |
| 7 | Complete removal of existing treatment on old surfaces by vacuume based sanding machine; scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots , removing nails etc, M&L for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new/old surfaces. complete all as specified and directed.including provision of scaffolding required for the treatment to external surfaces of building with required safety measures etc complete all as specified and as directed by Engineer in charge.Note : The work shall be executed stage wise and each stage approved by Engr-in-Charge.Stage 1 : Complete removal of existing treatment.Stage 2 : Priming with exterior water based wall primingStage 3 : 1st coat of exterior Acrylic emulsion Stage 4 : 2nd coat of exterior Acrylic emulsion |
| 8 | M & L for Preparation of newly and old plastered surfaces of walls priming plastered and other surfaces with alkali-resitant priming paint and applying two coats of cement base paint complete all as specified and directed. |
| 9 | M&L for Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 10 | M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 11 | M&L for writing building number one templet of any size and shape with white paint engraved on existing letter/ figure over a coat of painting with black paint including prepration of surfaces etc complete all as specified and directed |
| 12 | S&F for PVC (SWR) pipes 110 mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls including repair and replacement old pipe and Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large complete all as specified and directed. |
| 13 | S&F for PVC (SWR) bends of 110 mm bore and any radius all as specified. |
| 14 | Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed. |
| 15 | Supply and fixing for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as incl removing of existing glass if required complete all as specified and directed. |
| 16 | S& F in repairs GI mild steel wire cloth 0.56mm nominal dia of wire average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staple in wooden/steel door/windows etc complete all as specified and as directed by Engr-in-Charge. |
| 17 | Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc. complete all as specified and directed. |
| 18 | Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over & inculding a coat of white cement base putty compelet all as specified and directed. |
| 19 | All as per Srl item No.18 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound for wall, chajja, fins, sides including Preparation of newly plastered surfaces of walls complete. Note:-Supply only of WPC shall be measured and paid separately. |
| 20 | Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete all as specified and directed. |
| 21 | supply only integral water proofing compound Please Enable Macros to View BoQ information |
| 22 | supply only integral water proofing compound Please Enable Macros to View BoQ information |
