|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n.exc 1.5 sqm complete all as specified and directed. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm and n.exc 4 Sqm each complete all as specified and directed. |
| 3 | Taking down cement plaster on brick walls or stone walls of any description etc including raking out joints, hacking for key, scrubbing down with water etc, rubbish off the premises, complete all as specified and directed. |
| 4 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness, below or above ground level, complete all as specified and as directed. |
| 5 | Dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding ( but not backing), rubish off the premises complete all as specified and directed. |
| 6 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/steel frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as specified and directed. |
| 7 | Surface excavation n exc 30cm depth and averaging 15 cm depth and getting out in any type of soil complete all as specified and directed. |
| 8 | Excavation in post holes (or similar holes) each n.exc. 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exceeding 50m, in soft/loose soil and making good surfaces, complete all as specified and directed. |
| 9 | Removing excavated material n.exc. 50m and depositing where directed at a level n.exc. 1.5 m above the starting point, complete all as specified and directed. |
| 10 | M&L for Rendering 5mm thick cement plaster on fair faces of brick work, concrete sruface in cement mortar (1:3) as in ceiling finished even and smooth without using extra cement complete all as specified and directed. |
| 11 | M&L for Rendering 10mm thick on fair faces of brick work, concrete sruface in cement mortar (1:6), finished even and smooth without using extra cement complete all as specified and directed. |
| 12 | M&L for rendering 15 mm thick cemet plster on fair faces of brick work or concrte surfaces in CM 1:4 in two layers(5mm finishing layer over 10mm base layer) finished even and surface without using extra cemen with WPC over finishing layer complete all as specified and directed.Note: WPC shall be measured and paid seperately) |
| 13 | M&L for 15mm thick plaster in two layers (10+5mm) in cemet mortar 1:4 external layer of plaster shall be mixed with liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces or in chajjas/parapet walls etc, surface finished even and smooth with using extra cement complete all as specified and as directed.Note: WPC shall be measured and paid for separately. |
| 14 | Brick work with fly ash bricks (Old Size bricks) straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed. |
| 15 | S&F steel works in rectangular special shape post including distance pieces, cleats etc. including necessary cutting/ notching/ drilling rivertting/ welding or connecting with bolts or nuts complete conforming to IS-1161-1979 Grade st-240 provided with two coats of synthetic enamel paint over a coat of red oxide primer (Shape & size approved by GE), complete all as specified and directed. |
| 16 | Factory made solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening as per specification & drawing shown in SSR Part-II, complete all as specified and directed. |
| 17 | Factory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick wood grain moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and as directed. |
| 18 | S&F Anodised aluminium powder coated (minimum thickness of powder coating 50 micron) frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed |
| 19 | S&F powder coated any colour of coating not less than 50 micron, anodised aluminium door shutter, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fittings (all as per sample) such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos) and suitable handles 125mm long (02 Nos) in each door, complete all as specified & directed. |
| 20 | S&F powder coated any colour of coating not less than 50 micron, anodised aluminium widnow and ventilators shutters, side hung type without sash bars, aluminium sections weighing 0.55kg/m including necessary joining cleats, glazing clips rubber packing anodised aliminium snap beading screws anodised aluminium fittings (all as per sample) such as peg stays 150mm long (1 No) hinges type B-21 100mm long (2 Nos), tower bolt 100 mm long (02 No) and suitable handles 125 mm long (1 No) complete all as specified & directed. |
| 21 | S&F in repair 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts, complete all as specified and directed. |
| 22 | S&F in repair 100mm long, mild steel cold rolled butt hinges, medium weight, complete all as specified and directed. |
| 23 | S&F in repair 150mm long, aluminium, anodised, barrel tower bolts of extruded section, complete all as specified and directed. |
| 24 | S&F in repair 150mm long, extruded aluminium alloy handles, fabricated type, anodised, complete all as specified and directed. |
| 25 | Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples (fixed in repair),complete all as specified and directed. |
| 26 | S&F 3mm thick sheet glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 27 | S&F in repair 3mm thick figured/frosted glass ordinary quality, and glazing with oil putty or fixed with bead/glazing pins in squares n.exc 0.50 Sqm in each pane, complete all as specified and directed. |
| 28 | S&F in repair 25mm bore mild steel powder coated paint, single curtain rod (wall thickness not less than 1mm) including fancy type PVC brackets, fenials etc suitable for single curtain rod, etc complete all as specified and approved by GE. |
| 29 | M&L for cemnent concrete 1:2:4 type B-2 using (40mm graded crushed stone aggregate) in foundation, filling and mass concrete, surface bed to drain complete all as specified and directed. |
| 30 | M&L for 25mm thick PCC type B-0, 1:2:4 ( using 12.5mm graded crushed stone aggregate) as in sub floors for laying floor finish complete all as specified and directed. |
| 31 | M&L for PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundation, filling and mass concrete including necessary form work complete all as specified and directed. |
| 32 | M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 33 | M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in sub floors, sub bases, floors and pavings etc complete all as specified and directed. |
| 34 | M&L for PCC type C-1, 1:3:6 (using 20mm graded crushed stone aggregate) as in as in floors, complete all as specified and directed. |
| 35 | M&L for 40mm thick PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in s in sub floors, sub bases and floors etc completed all as specified and directed |
| 36 | M&L for Moorum/ red bajri filling in floors or pavings, laid in layers n.exc 15cm thick, spread, levelled and rammed including watering complete all as specified and directed. |
| 37 | M&L for 80mm thick M-40 grade factory made interlocking paver block machine pressed (using vibro compaction method) with topping in white cement not less than 5mm thick and non fadeble glossy pigment (using rubberised moulded, glossy finish) of approved colour and shape confirming to IS-15658-2006 complete all as specified and directed. |
| 38 | M&L for Sand filling under floors or paving including watering and consolidationand all as specified complete all as specified and directed. |
| 39 | Non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed (joint free) in neat cement slurry and pointed in coloured cement over 15mm thick screed bed or bedding layer of mortar in CM 1:4 and dismantling floor, hearth or walls tilling and terrazo topping including cement mortar bedding (but not backing), rubish off the premises, complete all as specified and directed. |
| 40 | M&L for 12 mm thick heavy duty Industrial tiles (sqaure/ rectangular), area of each tile exc 0.08 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match the tiles laid over and including 15 mm thick screed bed or bedding layer mortar in CM 1:4 including dismantling of old tiles of any description with bedding layer of mortar and removal of rubbish complete all as specified and as directed. |
| 41 | 18 to 20mm thick bhaislana zebra black marble work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade including dismantling old complete all as specified and directed. |
| 42 | Round chamfering to the edges of marble n.exc 15mm wide on shelves complete all as specified & directed. |
| 43 | M&L steel iron base plate plugs, bolts and screws of Fe 410 -W (Gde E-250) quality A complete all as specified and directed. |
| 44 | S&F mild steel as in vertical posts, Roof trusses (framed), trussed, purlins, rafters, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel, hollow section square/rectangular) or flat sections including distance pieces complete all as specified & directed. |
| 45 | M&L for preparation of new or previously un treated surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 46 | S&F Pre-painted galvalume aluminum zinc coating ( zinc coating 275) GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self tapping screws complete all as specified and directed. |
| 47 | M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature and fitting the same with necessary stainless steel nuts and bolts, including making hole supply and fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts,caps etc on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing railing of any description complete all as specified and directed. |
| 48 | M&L for preparation of new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 49 | M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed. |
| 50 | Preparation of old painted steel or iron surfaces of any description n.exc 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, complete all as specified and as directed. |
| 51 | Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash,complete all as specified and directed. |
| 52 | Complete removal of existing treatment from wall surfaces plastered or unplastered and applying two coats of white wash, complete all as specified and directed. |
| 53 | Complete removal of existing treatment from ceiling surfaces and applying two coats of white wash, complete all as specified and directed. |
| 54 | Preparation of new plastered or unplastered surfaces of walls and applying 2mm thick wall care putty and making the surface smooth & applying two coats of oil bond distemper paint over a coat of priming paint, complete all as specified and directed. |
| 55 | Complete removal of existing treatment from wall surfaces of any type/description viz. distemper, emulsion etc using mechanical means/grinder, cleaning surface to receive finish, stopping the holes/dipressions by applying 2mm thick wall care putty over one coat of primer making smooth, even surface and two coats of oil bound distemper, complete all as specified and as directed. |
| 56 | M&L for preparation of new plastered surface of external wall and chajjas, making surface smooth using sand paper, priming the surface with alkali resistance primer paint for external surface, applying two coats of exterior emulsion (weather coat) paint complete all as specified & directed. |
| 57 | M&L for complete removal of old existing treatment including preparation of plaster/unplaster surfaces of walls, chajja, fascia etc and applying two coat of exteior emulsion paint (weather coat) over a coa of primer any shade or any colour complete all as specified and directed. |
| 58 | S&F 21 mm thick maple wood plained one side and edge tongued & grooved or rebated and fixed with secret nailed in floor over 2nd hard wood runner size 70 x 45mm @ 300 c/c length wise) over 10/19,, air crush rubber pad laid in floor trench polishing on surface on any description including cleaning & preparing surface coating wood filler on new work with two coats and preparing wood based material new or old of any description treated with creosote , complete all as specified and directed. |
| 59 | S&F 4mm Alex ACP sheet as in roof/ wall sloping/ curved fixing any height and position with screw including all connected fittings all as per manufacture instructions, complete all as specified and directed |
| 60 | Writing alex 'g' letters letter or figures (Block, Roman, Italic or Indian) n.exc 30 cm high complete. The colour of paint and dimension of letter shall be used as approved by the Engr-In-Charge. |
| 61 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including unscrewing from board fitting and fixture such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody for reuse if serviceable or for taking credit and making good disturbed surfaces of walls, floors, etc with cement mortar and finishes to match existing surface complete all as specified and directed. |
| 62 | Disconneting & taking down ceiling fanc/ exhaust fan any type/ cap refixing to the same/other location after replacing rubber reel, fixing bolts and nuts with lock pins, connectors complete all as specified and directed. |
| 63 | Disconneting electrically, dismentling & taking down old flood light fittings from ceiling/ wall any type/ size alongwith all connected accessories for repair, checking all wiring and serviceability of all components and deposited to MES store yard complete all as specified and directed. Please Enable Macros to View BoQ information |
| 64 | Disconneting electrically, dismentling & taking down old flood light fittings from ceiling/ wall any type/ size alongwith all connected accessories for repair, checking all wiring and serviceability of all components and deposited to MES store yard complete all as specified and directed. Please Enable Macros to View BoQ information |
