|
| 1 | Earth work in excavation by mechanical means (Hydraulic Excavator)/manual means over area (exceeding 30 cm in depth. 1.5 Mtr in width as well as 10 sqm on plan) including disposal of excavated earth to be levelled and neatly dressed.All kinds of soil. For teen shade pillar foundation. |
| 2 | Providing and laying in position cement concrete including curing compaction etc . Complete in specified grade excluding the cost of centering and shuttering. All work up to plinth level 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) For Teen shade Pillar Foundation |
| 3 | Centering and shuttering with plywood or steel sheets including strutting, propping brancing both ways and removal of fromwork for Foundation, footing, step beam, raft, bases of column etc. |
| 4 | Providing and laying fabricating reinforcement for RCC work including straightening, cutting, bending, placing in position in binding (including cost of binding wire ) all complete up to floor three level. Hot rolled deformed bars (IS: 1139) |
| 5 | Providing and layiny in position specified grade of cement concrete for RCC Structure elements upto floor three level including curing, compaction, finishing with rendering in cement sand mortar 1:3 (1 cement ; 3 coarse sand) and making good the joints and cost of plastizers) if required) excluding the cost of centering shuttering and reinforcement for M20 grade Nominal Mix / Design Mix |
| 6 | Steel work in built up tubular trusses including cutting, hoisting (height upto 10m) fixing in position and applying a priming cost of approved steel primer, welded and bolted including special shaped washers etc. complete. Electric resistance or induction butt welded tubes. above plinth level upto 4.5 mtr height. |
| 7 | Structural steel work reveted or bolted or welded in built up sections, trusses and framed work, including cutting hoisting (height upto 10m) fixing in position and applying a priming coat of approved steel primer all complete |
| 8 | Providing corrugated G.s. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coat of approved paint on over lapping of sheet complete (upto any pitch in horizontal/vartical or curved surfaces) excluding the cost of purlins rafters and trusses and including cutting to size and shape wheneve required 0.63 mm thick with zins coating not less than 275 gm/m2 |
| 9 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 110 mm dia. For drainge |
| 10 | P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant. 75 mm dia. For drainge |
| 11 | P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant: Plain Tee 110 MM dia. |
| 12 | Painting with synthetic enamel paint of approved brand and manufacture to give an even shade: Two or more coats on new work |
| 13 | Kota Stone slab flooring 25mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and pilished complete with base of cement morter 1:4 (1 cement : 4 coarse sand) for area of each slab from 901 to 2000 Sq.Cm. Please Enable Macros to View BoQ information |
