Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced ) of any description & in any position not specifically provided for including dismantling of floor tiles etc complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description & in any position not specifically provided for complete all as specified and directed. |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 4 | Dismantling of stone slabs of any description or thickness in floors, approaches, dado/Partitions etc complete all as specified and as directed. |
| 5 | Demolition of brick work or rubbled stone masonry including all quoins arches , pillars etc built in cement mortar and including removal from the site complete all as specified and as directed. |
| 6 | Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed. Note: (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same). |
| 7 | Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc complete all as specified and as directed. Note: (Disturbed surface of wall shall be make good by the contractor. The rate quoted shall be deemed included for the same). |
| 8 | Taking down shutter of any description area exc 1.00 Sqm and not exc 2 Sqm each and removing from site complete all as specified and as directed. |
| 9 | Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and as directed. |
| 10 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm bore complete all as specified and as directed. |
| 11 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm bore complete all as specified and as directed. |
| 12 | M&L for cement concrete type B-0 1:2:4 (12.5 mm graded stone aggregates) 25 mm thick as in sub base of flooring etc complete all as specified and as directed. |
| 13 | M&L for screed bed or bedding layer of mortar 15mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 14 | M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:4 for laying floor finishes complete all as specified and as directed. |
| 15 | M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of path/hardstanding etc complete all as specified and as directed. |
| 16 | M & L for Non Skid jointless double charged vitrified ceramic printed scratch proof and stain resistant coloured tiles 600x600 x 9-10mm thick as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed. |
| 17 | M & L for Non Skid jointless double charged vitrified ceramic,scratch proof & stain resistance ceramic printed coloured tiles 600x600x9-10mm thick as in skirting etc , set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed. |
| 18 | M & L for Non Skid ceramic coloured jointless tiles 400x400x 7 to 8 mm thick , as in floors etc, set and jointed in neat cement slurry and pointed with white or coloured cement to match etc complete all as specified and as directed. |
| 19 | M&L machine cut and mirror polished kota stone ( size not less than 55cmx55cm for flooring & for tread of steps will be in one piece) slab flooring 18-20 mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed. |
| 20 | M&L for rendering 10 mm thick in cement mortar 1:3 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed. |
| 21 | M&L Glazed ceramic printed coloured tiles 300mmx 450mm , 6 to 7 mm thick, as on vertical surfaces such as dado,skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match,incl cutting edges etc complete all as specified and and as directed. |
| 22 | M&L machine cut and mirror polished kota stone slab 18-20 in riser of steps(in one piece ) , skirting, dado and pillar aid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror / granite polishing complete all as specified and as directed. |
| 23 | M&L for rounding to edges of stone(granite/kota) slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed. |
| 24 | M&L for Chequered cement concrete coloured tiles n.exe 0.016sqm area of each tile & 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment to match the shade / colour / matrix of tiles as in floor etc. complete all as specifed and as directed. |
| 25 | S & F 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls with clamps complete all as specified and as directed. |
| 26 | S & F in repair 110 mm dia PVC (SWR)bends/shoe with rubber rings joints fixed as required complete all as specified and as directed. |
| 27 | M&L for TMT bars 6 to 8 mm dia dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed. |
| 28 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan in CM 1:4 as in half brick thick walls complete all as specified and as directed. |
| 29 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings,shelves,chajjas incl edges and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished surfaces complete all as specified and as directed. |
| 30 | M&L RCC 1:1.5:3 type A1 in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves,chajjas,facia etc complete all as specified and as directed. |
| 31 | S&F 1.25 mm thick pressed steel frame of size 165 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate incl red oxide primer paint etc complete all as specified and as directed. |
| 32 | S&F 1.25 mm thick pressed steel frame of size 105 X 60 mm for door with one ore more rebate includings necessary fixing lugs, hinges, locks strike plate incl red oxide primer paint etc complete all as specified and as directed. |
| 33 | M&L for cement concrete type B-0 1:2:4 (12.5 mm granded stone aggregates) in door and windows frames any size single or double rebated, as required etc complete all as specified and as directed. |
| 34 | M&L for mild steel framed work as in grills, grating, doors, etc with ends of bars shouldered and / or riveted or forged into spikes framed guard bars barred iron doors, ladders framed balusters wals ways, railing framed work of water tanks and Framed work with ERW pipe similar work etc complete all as specified and as directed. |
| 35 | S&F Mild steel, plain black sheet 1.6mm thick in door shutters,, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and as directed. |
| 36 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type on both sides complete all as specified and as directed. |
| 37 | S& F 2nd class hard wood 35 mm thick factory made glazed and skeleton shutters open rebated and prepared to rceieve glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass,etc, size of members of shutters as spfd in SSR Part-1, Section 8, clause 8.24 (a) etc complete all as specified and as directed. |
| 38 | S & F solid PVC door frame of size 50mm x 47mm made out of 5 mm single side prelam PVC sheet used instead of plain colour PVC sheet reinforced with Ms Squre Tube in opening etc complete all as specified and as directed. |
| 39 | S & F factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall be covered with heat moulded both side prelam PVC sheet instead of plain colour PVC 'C' channelled having a PVC sheet strip of 20 mm wide stuck inside with solvent cement for siles and palin colour PVC sheet for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail : panelling of prelaminated PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, in the frame a site as per specification and drawing etc complete all as specified and as directed. |
| 40 | Supply and fixing mild steel cup board 60cm depth & with sides,back& 3 shelves&partition,top bottom& mild steel door shutter Godrej pattern two leaves with frame,incl necessary fittings of 18gauge MS sheet with locking arrangement and handle etc all as per Godrej Pattern with duplicate keys including necessary fittings& Powder coated spray painting over a coat of red oxide zinc chromate primer complete. The frame of cupboard to be fixed to wall with 6 Nos of hold fasts of 25 x 3mm flat iron, 15cm long The cost of hold fasts & grouting them in CM (1:3) is deemed to be included in unit rates (Only front face of cupboard to be measured) complete all as specified and as directed. |
| 41 | S&F powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min)(iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min)(iv) 4 mm thick glass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi) Locking cleats per shutter -01 Nos.(Min)(vii) Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix) fixing screw for frame with wall per windows- 08 Nos. |
| 42 | S&F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 43 | S&F factory made PVC 5.5mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure ccomplete all as specified and as directed. |
| 44 | S&F factory made PVC shutter/Shelves in required size at shape made out of 18mm thick PVC Celuka ply one side decorative lamination and other side plain/coloure complete including required frame work with panels shall be fabricated using adhesive, screws and solvent cement etc where ever required all the edges shall be covered with 2 mm thick edge bonding tape or 90 degree edge bent complete all as specified and as directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 46 | S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainles steel wire stapel etc complete all as secified and as directed. |
| 47 | S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed. |
| 48 | S&F Aluminium sliding door bolts 300mm long,plate type, stove enamelled black, with bright bolt not less han 12mm dia with and including a minimum of 6 bolts and nuts, four ton bolt plate andtwo on staple plate and fixed complete all as specified and as directed. |
| 49 | S&F 100 mm thick butt hinges, heavy weight, cold rolled mild steel and fixed etc complete all as specified and as directed. |
| 50 | S&F 125 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed. |
| 51 | S&F Double legged Floor door stopper of aluminium alloy body and tongue anodised with hard drawn steel spring fixed to door shutter of size 140mm complete all as specified and directed. |
| 52 | S&F ball catcher with 8 mm dia steel ball magnet catcher for cupboard shutter including striking plate as approved etc complete all as specified and as directed. |
| 53 | S&F continous (piano) hinges, mild steel, bright finish or electro galvanised, width of flap (when open) 30 mm etc complete all as specified and as direced. |
| 54 | S&F in repair white vitreous china wash basin white flat back size 550x400 excluding taps but including 32 mm dia chromium plated waste fitting and PVC waste pipe 610 mm long and MS brackets complete all as specified and as directed. |
| 55 | S&F in repair sinks with drainage board made of stainless steel 1 mm thick for kitchen with plugs,waste coupling,waste pipe, washers; including bedding in cement mortar on to dwarf walls, or including fixing cantilever brackets and connecting union to waste pipe overall size 915mmx 460mmx330mm with bowl size 410mm x 310mm x 160mm complete all as specified and as directed. |
| 56 | S&F in repairs vitreous china squatting pan orissa pattern long pan size 580 mm x 450mm white with cast iron ‘P’ or ‘S’ trap, front or back inlet and foot rests excluding flushing cistern & flush pipe but incl. cement concrete bedding fixed complete all as specified and as directed. |
| 57 | S&F in repair 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and including 40mm thick acrylic beading all around and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and as directed. |
| 58 | S&F in repair tubular towel rail 20mm dia type brass chromium plated 600mm long between flanges complete all as specified and as directed. |
| 59 | S&F Center hole basin mixer w/o Popup waste complete all as specified and as directed. |
| 60 | S&F wall mixer with provision for over head shower with115 mm long bend pipe complete all as specified and as directed. |
| 61 | S&F Sink mixer with 115 mm long bend pipe complete all as specified and as directed. |
| 62 | S&F in repair PVC valveless double syphonic action type flushing cistern low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets, suitable for both Indian Type Water Closet & Europeon Type Water Closet including brackets & connection to pipe & fixing of chain & pull or lever if including PVC pipe etc complete all as specified and as directed. |
| 63 | S&F in repair bib tap fancy type long body cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm bore pipe complete all as specified and as directed. |
| 64 | S&F in repair stop valves/angle valves fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions fixed for 15 mm bore pipe complete all as specified and as directed. |
| 65 | S&F in repair PVC connection of 45 cm length including brass nuts suitable for hot & cold water complete all as specified and as directed. |
| 66 | S&F in repair for CI 75 mm bore out let floor trap with stainless steel gratings including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed. |
| 67 | S&F medium grade galvanized steel tubing with all fittings &fixed complete to walls & ceiling or laid in floors 15 mm bore pipe (including in short length) concealled/surfaced complete all as specified and as directed. |
| 68 | S&F tubes medium grade galvanized with all fittings & fixed concealled/surfaced complete to walls & ceiling or laid in floors 20 mm bore pipe (including in short length) complete all as specified and as directed. |
| 69 | S&F in repair for 50 mm bore Cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors or fixed to wall vertically complete all as specified and directed. |
| 70 | S&F in repair for 75mm bore out let Nahani trap of Cast iron epoxy coated inside & outside as per IS15905, with stainless steel grating including jointing to waste pipe fixed in cement concrete tpe B-1 (1:2:4) etc complete all as specified and as directed. |
| 71 | Taking down PVC/cast iron pipes any bore including fittings of any dia with cement or lead joint fixed to walls or laid in trenches complete for refixing or replacement complete all as specified and directed. |
| 72 | Excavation in trenches in soft/loose soil n.exc 1.50 m wide and n.exc 1.50 m in depth for foundation or shafts,wells,cesspits,manholes,pier holes,cable laying,sewage/water lines etc complete all as specified and as directed. |
| 73 | Returning filling in including spreading leveling watering and well ramming in layer not exc 25cm thick complete all as specified and as directed. |
| 74 | S&F in repair 50 mm cast iron cowls complete all as specified and as directed. |
| 75 | S&F in repair 100 mm cast iron Branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and as directed. |
| 76 | S&F in repair 100 mm cast iron Sockets (double, collars) complete all as specified and as directed. |
| 77 | S&F in repair kitchen plate rack stainless steel 1 mm thick of size 90cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and as directed. |
| 78 | M&L for rendering 5 mm thick on fair faces of brick work or concrete surfaces on ceiling/ struts 1n patches in CM 1:3. finishing even and smooth without using extra cement complete all as specified and directed. |
| 79 | M&L for rendering 5 mm thick in CM (1:3) on fair faces of brick work or concrete to be finshed even and smooth without using extra cement over 10 mm thick in 1:4 as dubbing coat after applying a coat of anticorrosion chemical coating upon exposed reinforcement etc complete all as specified and as directed. |
| 80 | M&L for rendering 15 mm thick in CM (1:6) on fair faces of brick work or concrete surface finished even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 81 | M&L for rendering 15 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and fair mixed with water proofing compound as per manufacturer's instruction etc complete all as specified and as directed.Notes : WPC shall be measured and paid seperately |
| 82 | M&L for rendering 10 mm thick in CM (1:3) on RCC Chajja / Facia over 20mm thick in CM 1:4 as dubbing coat etc complete all as specified and as directed. |
| 83 | Supply only integral water proofing compound complete all as specified and as directed. |
| 84 | M&L for cement concrete 1:2:4 type, B1 using 20 mm graded stone aggregates as in copings, roof padding/staging of water tank etc including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and as directed. |
| 85 | M&L two coats of white wash on ceiling on old plastered surfaces including preparation of surfaces complete all as specified and as directed. |
| 86 | M&L three coats of white wash on ceiling on new plastered surfaces including preparation of surfaces complete all as specified and as directed. |
| 87 | M&L for preparation of old decorated surface of walls by removing existing treatment with mechanical sander (rpm 1500-2700) along with internal dust extraction system for clean environment certified by reputed paint manufacturers and make the surface smooth all as specified and prescribed by manufacturer of paint complete all as specified and as directed.Note:- (i) The old surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per manufacture’s instruction before application of paint. The cost of materials, labour & T&P required for preparation of surface are deemed to be included in the rates quoted. (ii) The work must be got executed through authorised applicator of paint manufacture and shall be approved from GE before commencement of work.(iii) The cost of Scaffolding wherever required are deemed to be included in the rates quoted by the contractor. |
| 88 | M&L for preparing plastered surface with 2mm thick Birla/Asian wall care Putty & applying two coat of oil bound distemper white or any tint over a coat of primer etc) complete all as specified and as directed. |
| 89 | M&L for Preparing any plastered surface of walls applying two coats of exterior weather proof paint over a coat of primer etc complete all as specified and as directed. |
| 90 | M&L for preparing plastered surface of walls and applying 1.5mm thick exterior water proof wallcare putty of Birla/Asian c complete all as specified and as directed. |
| 91 | M&L preparing new wooden surface of any description, not other wise described over 10 cm widht or girth and applying two coats of synthetic enamel paint over a coat of pink primer etc complete all as specified and as directed. |
| 92 | M&L preparing of old painted surfaces of wood & wood based surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and directed |
| 93 | M&L for Preparation of new steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed |
| 94 | M&L preparation of old painted surfaces of steel surface of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed. |
| 95 | S&F in repair mild steel helical door spring 150 mm long ordinary rat tail type incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 96 | M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet etc complete all as specified and as directed.Note: WPC will be measured and paid separtely |
| 97 | M&L for two coat of painting with Dr Fixi fast Flex (or equivalent) water proofing liquid including preparation of new plastered surfaces complete all as specified and as directed by Engineer-in-Charge. |
| 98 | M&L cement concrete 1:5:10 type E-2 using 20mm granded crushed stone aggregates as in sunken portion of WC etc complete all as specified and as directed. |
| 99 | M&L for preparing surface of steel and iron work, new or old , treating ends of posts, back of chowkhats etc area tarred exc 0.10 sqm and not exc 0.50 sqm each and treated with tar or coat tar or black paint etc complete all as specified and as directed. |
| 100 | Removing excavated soil/Materials to a distance exc 1.50 Km and depositing the debris outside of MOD land where directed etc complete all as specified and as directed. |
| 101 | Taking down existing un-serviceable water proofing treatment from roof slab and cleaning the roof slab by wire brush and removing debris to a distance exc 500 mtr but not exc 1.50 Km etc complete all as specified and as directed. |
| 102 | Disconnecting existing tank of capacity exc 500 ltr but not exc 1000 ltr, setting aside (or lowering if required) for repairs, cleaning etc and hoisting if required reconnecting and re-fixing in position incl Cleaning and removing all scale and dirt, etc., from tanks and from mouths of circulating pipes, etc.complete all as specified and as directed. |
| 103 | Dismantling of existing tank of capacity exc 500 ltr but not exc 1000 ltr,water tanks and removing to store and S&F in repair rotational moulded polyethylene water storage tanks IS :12701-1996 marked (cylindrical vertical with close top) of 1000liter capacity with an including 20mm dia ball PVC float valves with polythene float and flynut screwed for iron pipe or brass and fixed etc complete all as specified and as directed. |
| 104 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 15 mm dia bore and re-fxing of old steel tubing and connection in new or od position (walls, ceiling, floo) etc complete all as specified and as directed. |
| 105 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 20 mm dia bore and re-fxing of old steel tubing and connection in new or old position (walls, ceiling, floor) etc complete all as specified and as directed. |
| 106 | Taking down steel tubing & connections including cleaning for refixing serviceable pipe or removal balance pipe of 25 mm dia bore and re-fxing of old steel tubing and connection in new or old position (walls, ceiling, floor) etc complete all as specified and as directed. |
| 107 | S&F 20mm ball brass valve, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed etc complete all as specified and as directed. |
| 108 | S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed. |
| 109 | Fixing only as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 20 mm bore and fixed as in repair complete all as specified and as directed. |
| 110 | S&F as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and as directed. |
| 111 | Fixing only as in repair Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe 25 mm bore and fixed as in repair complete all as specified and as directed. |
| 112 | M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface mixed with water proofing compound as per manufacture instruction etc complete all as specified and as directed. Notes : WPC shall be measured and paid seperately Notes :- Rates includes to carried out the work on roof slab up to 4th stories building nothing extra shall be admissible on this account |
| 113 | M&L APP based polymeric membrane minimum weighing 3.6 kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) with 15 cm longitudinal & horizontal over lapping and joints finally pasted with thermo- fused withblow lamp laid over a coat bitumen @ 1.20 Kg /Sqm over bituminous primer 0.30 ltr per sqm as per APP manufacturer instructions etc complete all as specified and as directed. |
| 114 | M&L two coat of aluminium paint over top surface of water proofing membrane etc complete all as specified and as directed. |
| 115 | S&F in repair 25 mm dia AL powder coated drappery curtain rod with brass /nickel chrome polish bracket & finials complete all as specified and directed . |
| 116 | S&F tubes medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors 40 mm dia bore pipe (including in short length) as in spout pipes etc complete all as specified and as directed. |
| 117 | Dismantling Brick tiles or terracing tiles, single layer on roofs etc complete all as specified and as directed. |
| 118 | Demolition Mud in roofs, any thickness, including plastering and leaping (whether full thickness removed or only or part thereof) complete all as specified and as directed. |
| 119 | M&L Cement concrete tiles 25cm x 25xm x22mm thick, machine pressed; set, jointed and pointed in net cement slurry in floors, and cut and polished with grey cement and no pigment on roof over 15 mm 1:4 cement screed complete all as specified and as directed. |
| 120 | M&L for brick work with sub class 'B' brick, straight or curved on plan exc 6.0 mtr mean radius built in CM 1:6 etc complete all as specified and directed by Engineer-In-Charge. |
| 121 | S&F in repair 50 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, cast (spum) iron waste & vent pipe fixed to walls complete all as specified and directed by Eng-in-Charge. |
| 122 | S&F in repair 75 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, cast (spum) iron waste & vent pipe fixed to walls complete all as specified and directed by Eng-in-Charge. |
| 123 | S&F in repair 100 mm bore Cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, cast (spum) iron waste & vent pipe fixed to walls complete all as specified and directed by Eng-in-Charge. |
| 124 | S&F in repair 75 mm bore cast (spum) iron bend or required degree complete all as specified and directed by Eng-in-Charge. |
| 125 | S&F in repair 75 mm bore cast (spum) iron bend with access door or required degree complete all as specified and directed by Eng-in-Charge. |
| 126 | S&F in repair 100 mm bore cast (spum) iron bend or required degree complete all as specified and directed by Eng-in-Charge. |
| 127 | S&F in repair 100 mm bore cast (spum) iron bend with access door or required degree complete all as specified and directed by Eng-in-Charge. |
| 128 | S&F in repair 100 mm bore cast (spum) iron branch piece fixed in any position complete all as specified and directed by Eng-in-Charge. |
| 129 | M&L for Resecuring or easing and adjusting without taking down shutter of any discription n exc 1.0 sqm each complete all as specified and directed. |
| 130 | S&F Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed by Eng-in-Charge. |
| 131 | M&L for Resecuring or easing and adjusting without taking down shutter of any discription exc 1.0 sqm but nexc 2.0 sqm each complete all as specified and directed. |
| 132 | S&F 40 mm dia. cup boards knobs fixed with nut , screw and washer of brass , polished Complete all as specified and directed. |
| 133 | M&L for granite (of any type) stone slab 16 to 18mm thick machine cut and mirror polised, in skirting, Kitchen platform /dado etc laid over cement screed jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding the edges half round and polishing including pinning in brick/concrete wall to hold & support the vertical surfaces to granite work including drilling to wall complete all as specified and directed. |
| 134 | M&L for Preparing plastered surface of walls applying two coats of exterior weather proof paint over a coat of primer etc complete all as specified and as directed. |
| 135 | M&L Marble work 18-20mm thick (table rubbed and polished) in floor and like, in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of white type fixed as in strips in flooring of kota stone etc complete all as specified and as directed. |
| 136 | S&F 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) corrugated sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed. |
| 137 | S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed. |
| 138 | S&F modular type stainless steel basket size 0.50 m x 0.53 m x 0.10 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arranement complete as specified and dirceted. |
| 139 | S&F modular type stainless steel basket size 0.50 m x 0.50 m x 0.150 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and dirceted. |
| 140 | S&F modular type stainless steel basket size 0.50 m x 0.50 m x 0.21 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete as specified and dirceted. |
| 141 | S&F modular type stainless steel cutlery basket size 0.50 m x 0.50 m x 0.100 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and dirceted. |
| 142 | S&F modular type stainless steel cup and saucer basket size 0.50 m x 0.50 m x 0.150 m (dia of wire not less than 3.0mm or made with 1mm perforated SS sheet ) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and dirceted. |
| 143 | S&F modular type stainless steel Grain basket size 0.50 m x 0.50 m x 0.150 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arranement complete all as specified and dirceted. |
| 144 | S&F modular type stainless steel Thali basket size 0.50 m x 0.50 m x 0.200 m (dia of wire not less than 3.0mm) of any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and dirceted. |
| 145 | S&F for 35mm thick factory made 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 146 | S & F in repair corner shelf of 300 mm size with ABS brackets complete all as specified and dirceted. Make : Prayag /Jaquare /Plumber |
| 147 | S&F mild steel drawer cabinet channel for moving the drawer etc complete as specified and directed. |
| 148 | S&F in repair 300x450mm PVC cabinet mirror of selected quality glass mounted on PVC framed and fixed to wooden plug with CP screw and CP washer complete all as specified and directed. |
| 149 | S&F in repairs Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 150 | S&F in repairs EWC Vitreous China wash down water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe,including 'P’ or ‘S’ trap, front or back inlet, connection to drain (or outgoing pipe), flushing pipe, antisyphonage pipe, etc. fixing with cement concrete bedding complete all as specified and as directed. |
| 151 | S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. |
| 152 | S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed. |
| 153 | M&L for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filling and 25mm sand cousing complete all as specified and as directed. |
| 154 | M&L for 80mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and including joints filling and 25mm sand cousing complete all as specified and as directed. |
| 155 | M&L for Providing and laying factory made kerb stone of M-25 grade concrete at or near ground level ,in position to the required line, level, and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including providing a necessary opening wherever required to drain water complete all as specified and dirceted. |
| 156 | S&F stainless steel self closing hydraulic hinge of 120mm size for PVC Cabinets/Cupboards shutter complete all as specified and dirceted. |
| 157 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc. complete all as specified and directed. |
| 158 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 159 | Taking down carefully copper/aluminium Sub main wiring of any size from surface/concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 160 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M complete all as specified and as directed. |
| 161 | Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M yard and refixing the same complete all as specified and as directed. |
| 162 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in and including Concealed PVC conduit of size 20/25mm ISI marked inclusive of tees ,bend ,elbows etc upto and including modular sunken anodised steel box for housing modular switch socket , regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge. (a) One light point/bell/fan point controlled by one way switch |
| 163 | (b) One light point/fan controlled by Two way switch |
| 164 | (c) One 5 amps socket out let point controlled by one switch on same board with other switches. |
| 165 | (d) One 5amps socket out let point on independent board controlled by one switch. |
| 166 | All as per item No. 162, above, but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. |
| 167 | M&L for point wiring with 1.5 Sq mm single core PVC insulated unsheathed copper FRLSH multi stranded conductor cable in in existing conduit & making good the disturbed surface of wall with and including modular sunken anodised steel box for housing modular switch socket , regulator etc including modular cover plate and cover frame of any module ISI marked of suitable size complete including PVC insulated multi stranded copper conductor 1.5 Sq mm FRLSH cable as earth wire to common earth dolly for connection to ceiling rose to earth terminal including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed by Engr-in-charge. (a) One light point/fan/ Bell point controlled by one switch |
| 168 | (b) One 5amps socket out let point controlled by one switch on same board with other switches. |
| 169 | (c) One 5amps socket out let point on independent board controlled by one switch. |
| 170 | All as per Item No.168, above, but using 2.5 sq mm single core copper conductor cable of multistranded FRLSH PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point on independent board including necessary running of 2.5 sq mm copper conductor FRLSH PVC wire as earth continuity conductor along with wiring and connecting to the common eath dolly complete all as specified and directed. |
| 171 | S & F for Modular Switch , single pole, one way, and 5/6 Amp single module complete all as specified and directed. |
| 172 | S & F for Modular Switch , single pole, two way, and 5/6 Amp single module complete all as specified and directed. |
| 173 | S & F for Modular Switch , single pole, one way, and 15/16 Amp single module complete all as specified and directed. |
| 174 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module complete all as specified and directed. |
| 175 | S & F for Modular Socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module complete all as specified and directed. |
| 176 | S & F for for Bell push modular 6 Amps single module complete all as specified and directed. |
| 177 | S & F for lamp holder , PVC / Polycarbonate type with back plate suitabl for batten/ slanting fittings complete all as specified and directed. |
| 178 | S & F for Ceiling rose, surface Bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed. |
| 179 | S & F for Bell Electric Ding dong type suitable for operation on 230 volt 50 HZ A C supply complete all as specified and as directed. |
| 180 | Supply and fix brushless direct current motor (BLDC) ceiling fans complete with blades(03Nos), with remote control and accessories , 230 V, 50 Hz, 1200 mm sweep, Min air delivery 210 CMM with service value greater than 7.75 BEE. Five star rated, provide electrical connection from ceiling rose to fan terminal by providing flexible cable three core Copper conductor of size 23/0.0076 (3 Core x 0.50 Sqmm), ISI marked and write down MES Number on fan by black paint/Marker complete all as specified and directed by Eng-in-Charge. Make :- Havells / Crompton / Bajaj/Orient |
| 181 | Supply and fix exhaust fan , steel/metal body AC single phase, 230 V of size 300 mm sweep with blades, frame and louvers complete all as specified and as directed. |
| 182 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm including provision of PVC flexible copper cable of size 23/0.0076 two core from ceiling rose to exhaust fan for connection and making suitable size of hole to existing brick wall for fan base compelte all as specified and directed. (Note : Cost of suitable opening wall for fixing exhaust fan is deemed to be included in overall rate quoted) |
| 183 | S & F for Highly efficient LED Bulbs, 09 W, used as a ready replacement for existing GLS/CFL direct fit lamp,in B-22 cap of make Bajaj, Havells, HPL complete all as specified and directed. |
| 184 | Supply and fix in repairs Wall light fittings suitable for LED bulb including LED bulb of 7 watt, including connection with all necessary fixing accessories complete all as specified and directed by Engr-in-Charge. Make :- Havells / Bajaj/ Philips. |
| 185 | Supply and fix in repairs integrated LED tube light fitting 1x18/20 Watt, 6000K complete fitting with all accessories duly connection with three core flexible copper cable duly fixed on two nos of PVC square boxes including taking down the existing complete all as specified and directed. Make:-Havells /Wipro |
| 186 | S & F for Decorative ultra slim LED light fitting 2 feet 10 watts, 6500K batten aluminium extruded with end caps complete all as specified and as directed. Havells / Wipro/Philips. |
| 187 | S & F for Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. Make:Havells Bajaj/ Philips. |
| 188 | S & F for Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 30 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe 40 mm dia medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as specified and directed by Engineer- in-charge. |
| 189 | Supply assembly, erection, testing commissioning of indoor wall mounted panel frame size of 1500mm X 900mm X 247mm mounted cubical type factory made IP 65 of environment friendly polycarbonate PC - GFS Insulation-enclosed power distribution board as power switchgear and control gear assembly (PSC) in accordance with IEC 61439-2wall mounted LT panel board with OEM Manufacturing certificate,Bottom parts and lids of the boxes made from impact-resistant polycarbonate, halogen and silicone-free, colour RAL 7035, transparent lid with quick action fasteners for tool operation. Burning behaviour according to IEC 60695-2-11 glow wire test + 960°C.Maximum water absorption 10 mg in accordance with DIN 53473. Protective measure: totally insulated (protection class II), the enclosure should have mechanical strength equivalent to IK10 (bidder should submit compliance for same for polycarbonate enclosure in OEM letterhead with technical bidding) suitable for 415V 3 phase 4 wire, 50HZ non metalic kiosk single door with the required provision for 3 switch gears and control gears along with the approved make. |
| 190 | The LT panel including Sepratedcomparment for fixing of fourNosThree Phase &single phase meter and providing MCB,providing glass view for reading of meter complete fabrication shall be painted as per specification. Wall mounted LT panel board shall be complete with all standard accessories factory made with OEM manufacturing certificate & the type tests report as per CPRI ,including, phase indicating lamps control fuse unit, MV danger notice plate numbered/lettered and with comprising the following. Drawing from Original Equipment Manufacturing ( OEM )to be got approved from accepting officer before supply of Panel. ( Drawing from any other agency / System house will not be accepted. Panel should be manufactured and assembled by OEM only. Fabrication /Assembling from any other system house will not be accepted. The bidder should submit all relevant type test certificate / compliance in OEM letterhead during technical evaluation. The bidder should provide warranty / guarantee format in OEM letterhead. The bidder should submit Routine test certificate during order execution in OEM letterhead.Make: HENSEL Mi Power distribution board / SpelsbergGTi System/ Rittal polycarbonate enclosure*Incoming : MCCB 125A, 4 pole, 25KA-1 No.,RYB Indication lamp, Digital Ampere Meter . Digital Volt Meter ,125A/5A,5VA,CL.1, CT – 3nos,Fuse Terminal Block with 2A Fuse-6nosOutgoing : connecting the following switch gear: (i) MCB, 40A FP amps, 415 volts, ‘C’ curve, 10 KA - 04 Nos (ii) MCB, 32A DP amps, 240 volts, ‘C’ curve, 10 KA - 04 Nos (iii) Fixing only 3phase &1phase serviceable existing electric meter- 08Nos each |
| 191 | S & F for metal clad box suitable for 230 volt 50 Hz for AC and Geser connection three pin and socket with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed. |
| 192 | S & F for sheet metal enclosure MCB DB SPN 12 way, IP-43, IK 09 with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and as directed. |
| 193 | M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 6 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 6.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian Note:- Two runs of 6 sqmm cable,one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 194 | M&L for Sub main wiring in repairs with two runs of single core FR LS PVC insulated unsheathed cable 1100 volts grade, 4 Sqmm size with multistranded copper conductor, drawn in and including non metallic rigid PVC conduit of not less than 25 mm dia concealed in wall by cutting chases of wall and making good the disturbed surface, including PVC insulated unsheathed FR LS 4.0 Sqmm cable with multistranded copper conductor green PVC insulated as contineous earth conductor cable connected to earth dolly from main distribution board complete all as specified and directed by Engr-in-Charge. Make of PVC conduit/Casing Caping:- Plaza/Finolex/Polycab/Kalinga/Jindal/Asian Note:- Two runs of 4 sqmm cable,one run of 4 sqmm cable and one run of PVC conduit will be measured as one unit |
| 195 | S & F for MCB single pole and neutral rated capacity 40 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 196 | S & F for MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and as directed. |
| 197 | M&L Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicatedincluding testing on completion Note :- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
| 6 | Click here to download tender document | Tender Documents |
| 7 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
