Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | M & L for Brick work in CM (1:6) with sub class 'B' bricks built in one brick thick with old bricks straight or curved on plain surfaces including demolition of old brick work or stone masonary built in cement mortar complete all as specified. |
| 2 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each all as specified and directed for windows/ventilators. |
| 3 | Taking down chowkats or frame with shutter (without taking off shutter from the frame) exc 1.5 Sqm not exc 4 each all as specified and directed for doors. |
| 4 | Taking down shutter with frame of area exceeding 1 sqm and n-exc 2.00 sqm each. All as specified and directed. |
| 5 | Supply and fixing solid PVC Door Frame of size 50mm*47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet & edges will be Painted to match with Prelam sheet reinforced with MS square tube, suppling and fixing in opening complete as specified by the manufacturer and as per directions of Engineer-in-charge. |
| 6 | Supply and fixing Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. MS frame shall be covered both side Prelam PVC sheet used instead of plain colour PVC sheet. stile and rails feathered at edges. PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and pre lam colour PVC sheets for top rail, lock rail & bottom rail; Pannelling of of prelam colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles& rails with suitable PVC sheet beading and joined together with solvent cement, suppling and fixing in the frame at site as specified by the manufacturer and as per directions of Engineer- in-charge. |
| 7 | S&F Aluminium, anodised, 150mm barrel tower bolts of extruded section all as specified and directed by Engg In Charge. |
| 8 | S&F Aluminium handles 150mm size,extruded alloy,fabricated type , anodised all as specified and directed by Engg In Charge. |
| 9 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /cupboard frame/ Chowkhat of Size 45mm x 70 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge. |
| 10 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with double rebate of Size 65mm x 125 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and and making good with plastering/rendering etc. around the finished opening of the distrubed surface with Cement Mortar 1:4 complete all as specified and as directed by Engineer-in- charge. |
| 11 | M&L for framed bracket of angles or T with web and flanges cut to shape ,drilled and counter shunk for screw incl bending and welding angles as neccesary guesset plate ,riveting etc for cooler stands and for chajja standings, door angle frame,holdfast and brackets etc. |
| 12 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm modulus of elasticity 850N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retardant and with and including Supply & Fixing of 02 Nos SS 150mm long Tower Bolt with and including S&F of 02 Nos SS 150mm long handle and 300 mm SS sliding door bolt with and including taking down of existing shutter complete all specified and directed by Engineer -in-charge. |
| 13 | Supply & Fixing Factory Made 30mm thick Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cum , having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter for fixing Mosquito mesh and XTN aluminium mesh together on panel area of door except stiles and rails to be panelled with and including mesh with self tapping round headed scresws at required distance, screws and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws with and including 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01 No. of helical door spring of 300 mm length including taking down of existing shutter complete all as specifie and as directed by Engineer-in-charge. Note: 1. Material test certificate of all the items and authentication should be compulsory provided by the manufacturing company 2. The rate of 03 Nos door Stainless steel butt hings 100mm long with Stainlessd steel screws for each , 02 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01no. of helical door spring of 300 mm length is inclusive in this item and nothing shall be paid extra on this item.3 The rate of taking down of existing shutter complete all specified and directed by Engineer -in-charge is included in this item and nothing shall be paid extra on this account.4 The rate of Mosquito mesh and XTN aluminium mesh is included in this item and nothing shall be paid extra on this account. |
| 14 | Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard flush door shutter of 20 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and naturalfibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges shall be paid separately) |
| 15 | Supply & fixing Type-1 aluminium anodised hasp and staple of size 115 mm conforming to Is 363-1993 complete all as specified and as directed by Engineer-in-charge. |
| 16 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished. |
| 17 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window of area exceeding 1.00 Sqm but not exceeding 2 Sqm each /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and galvanized steel wire mesh cloth 0.56mm nominal dia of wire and average width of aperature and fixed with tinned tacks or galvanised wire staple. including taking down of existing windows complete all as directed (Note :- 5mm thick toughened Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) |
| 18 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window of area not exceeding 1 Sqm each /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass and galvanized steel wire mesh cloth 0.56mm nominal dia of wire and average width of aperature and fixed with tinned tacks or galvanised wire staple. including taking down of existing windows complete all as directed (Note :- 5mm thick toughened Glass and stainless steel wire shall be included in this item nothing shall be paid extra in this account. Net opening will be measured for payment purpose.) |
| 19 | S&F decorative Curtain rod stainless steel with fixing brackets, stops, rollers etc fancy type in repairs, complete all as specified |
| 20 | S&F stainless steel sink, 1.0mm thick for Kitchen with plug, wasts pipe, washers including contilener cast iron bracket, connecting 4mm etc of overall size 495mm x 420mm with bowl size 410 x 330mm x 160 including taking down old all as specified and directed. |
| 21 | S&F for Plate rack stainless steel of approx size 0.75 x 0.60 x0.25 m made out of 1mm thick MS sheet with all necessary fittings, screws, bolts and suficient space for utenciles complete, all as specified and as directed. |
| 22 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 23 | Material and labour for Waterproofing treatment to sunken floor using acrylic based multipurpose polymer. The treatment shall be carried out as per manufactures specification. The treatment shall be include of the following elements also: 1. Surface preparation of substrate by removing all traces of contaminates, loose and friable particles, cement laitance oils and grease, water repellent coatings etc2. Injection grouting using cementitious grout if required. The payment for injection grouting shall be made separately etc3. Repair to the substrate, filling of blow holes/voids and surface leveling using appropriate products specified by the manufacture.4. All intersections of horizontal and vertical surface should be profiled with a mortar fillet of minimum 25mm x 25mm.5. The moisture content of the substrate shall be checked before application of first coat at water proof coating at the rate of 200 g/m2 followed brush topping at 450g/m2 per mm. The second coat shall be reinforced with glass fabric between the first and second coat.6. The treatment shall be protected by application of polymer modified cement mortar of thickness 10mm applied at the rate of 50g per mm.7. Tech specification : Tensile adhesion strength 0.5N/Sqmm (as bonding slurry). |
| 24 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge. |
| 25 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, complete all as specified and directed by Engineer-in- charge. |
| 26 | Dismantling of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof disposal off rubbish upto a distance not exceedomg 500.00mtr where directed ) complete all as specified and directed by Engineer-in- charge. |
| 27 | Material and Labour for Water proofing tratment to existing roof / terrace (material of water proof treatment as approved by GE) Single component, acrylic based, flexible, micro fibre reinforced waterproofing and heat reflective coating system. the treatment shall be carried out as per the manufacturers instructions and shall include the followings:(a) Preparation of substrate and cleaning it off all loose and triable by mechanical means(b) Open the cracks lines to form , V grooves with cutter/hammer/chisel up to 5-10mm and filling with crack filler and PU sealant.(c) application of primer coat @ 0.2 to 0.3 kg/ sqm followed by the first coat @ 0.75kg/ Sqm.(d) The second coat shall be applied @ 0.75 kg / Sqm and reinforced with fabric re-inforcement between the first and second coat.(e) The top coat of primer shall be applied after the second coat dries off @ 0.05-0.08 Kg per Sqm.(f) The material shall adhere to following specification. TECHNICAL SPECIFICATION OF MATERIALTensile Strength 1.5 MPa ASTM D412Elongation at Break > 200% ASTM D412Adhesion in Peel > 1.5 MPa (on concrete substrate) EN 1542Crack Bridging Ability Passes upto 3.2mm Width ASTM C1305Permeability to Water Vapour Passes IS 2645Water Vapour Transimission ~ 23 g/m²/24hr ASTM E96Water Absorption < 10% ( by Mass) ASTM D570Microbiological Resistance No Algae & Fungal Growth ASTM D5590Solar Reflectance Index 102 ASTM E1980.Note : Complete material shall be approved by GE and procured in bulk and kept in lock and key.Note : The installation company should be trained and authorized by Manufacturer & installation to be carried out as per manufacturers approved method statement. All auxiliary & accessories involved during application should be supplied by single manufacturer as a part of system. Any component used which is not manufactured by the particular manufacturer can only be used with official approval from manufacturer in consultation with GE. |
| 28 | Material and Labour for 75 mm average thick PCC padding in 1:2:4 Type B-1 (using 20mm graded stone aggregates) as in roof slab finishing the surface even and fair using Liquid water proofing compound complete all as specified and directed. Liquid Water proofing compound shall be measured and paid separetly as supply only under appropriate item of Schedule 'A' BoQ. |
| 29 | Material and labour for cement slurry @ 1.2 kg /sqm spreading with bristle brush and rendering 15 mm (average thickness) in cement mortar 1:3 finished even and fair mixing with Liquid water proof compound 200ml per 50 kg cement bag on roof surface complete all as specified and as directed by Engineer-in-Charge. Note :- Liquid water proof compound shall be measured and paid separately. |
| 30 | Supply only Liquid water proofing compound complete as per manufacturer's instructions and directed by Engineer-in-charge. |
| 31 | Supply & Fixing 16 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed including taking down existing GI tubing complete all as specified and directed by Engineer-in-charge. |
| 32 | Supply & Fixing 20 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 15 mm complete all as specified and directed including taking down existing GI tubing complete all as specified and directed by Engr-in-Charge |
| 33 | Supply and fixing in replacement three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories complete all as specified and as directed by Engineer-in-charge. Note: 1.Overflow pipes and Ball valves shall be measured and paid as supply and fixing seperately under appropriate items of Schedule'A' BoQ. |
| 34 | Supply and fixing in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe of size 20mm bore ( weight 210 gms Minimum) complete all as specified and as directed by Engineer-in-charge. |
| 35 | S&F in repairs,stop cock with butterfly handle ,screwed both ends for iron pipe of dia 20 mm complete all as specified and directed,all as specified & directed. ISI Marked |
| 36 | S&F in repairs Waste pipe/low density polyethylene (LDPE) pipe of pressure rating 6 Kg/Sqcm 32mm bore etc complete all as specified and directed by Engr In Charge |
| 37 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 38 | Supply & Fixing in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified and as directed by Engineer-in- charge. |
| 39 | Supply & Fixing wash hand basin of size 550mm x 400 mm vitrous China white flat back including brackets, waste coupling & including PVC P Trap complete all as specified and as directed by Engineer-in-charge . |
| 40 | S&F in repair PVC low level cistern 10 Ltr cap PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern. |
| 41 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm. |
| 42 | S & F in repair fancy type, chromium plated stop valves/Angle valve cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipes 15mm bore |
| 43 | S&F in repair soap dish,chromium plated, 160X160X90 mm, fixed to wall with plugs with chromium plated screws complete all as specified and directed. |
| 44 | S & F in repair Chromium plated 125 mm long shower rose with or without swivel joints, any size, incl fixing to steel pipe or union. |
| 45 | S & F in repair 15mm bore fancy type chromium plated concealed stop , long shunk, valves cast copper alloy, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions |
| 46 | S&F in repairs 15mm bore fancy bib taps, chromium plated ,cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule. |
| 47 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges |
| 48 | S&F in repairs size 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 49 | Supply and Fixing 110 mm bore of pipe PVC (SWR) type B pipes single socket in any length with Stack clamps at a interval of 1.2 m & stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge. including Taking down old CI/AC eaves gutters and rainwater pipes ( of any size and pattern), including all fittings, complete all as specified and as directed by Engineer - in-charge. |
| 50 | Supply and Fixing 110 mm bore, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified |
| 51 | Supply and Fixing 110 mm bore, PVC (SWR) gully trap setting and jointing with solvent cement complete all as specified |
| 52 | Supply and Fixing 110 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge. |
| 53 | Supply and fixing 50 mm bore PVC (SWR) pipe Type -B single socketed as over flow pipe for water tank in any length with rubber ring joint fixed to walls with projrcted MS clamps of size 25mm x 3mm at 1.2 mtr interval, and making good in cement mortar in 1:3 at opening including complete all as specified and as directed by Engineer-in-charge. |
| 54 | Supply and Fixing 50 mm bore, PVC (SWR) fittings Type -B such as bends, tee, shoe etc; fixed to PVC pipes, complete all as specified and as directed by Engineer-in-charge. |
| 55 | S&F 100 mm dia PVC type B (SWR) branch piece, single (single Y) equal or unequalbranch piece single ( equal or unequal), ordinary or inverted or with parallel branches |
| 56 | S&F 50 mm PVC (SWR) vent cowl complete all as specified and directed. |
| 57 | Taking down cement plaster of any description, any thickness from internal and external surfaces of walls/soffits / chajjas/parapet walls /ceiling etc .incl raking out joints, hacking for keys, scrubbibg down with water etc complete all as specified and directed by Engineer-in- Charge. |
| 58 | Material and Labour for Cement plastering 15mm thick in two layers (10mm and 5mm respectively) in cemet mortar 1:4 including mixing of liquid water proofing compound as per manufacturer's instructions on brick work or concrete surfaces walls/soffits chajjas/parapet walls etc. finished even and smooth without using extra cement complete all as specified and directed by Engineer-in- Charge.Note : liquid water proofing compound will be measured and paid separately. |
| 59 | Material and Labour for Cement plastering 10mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge. |
| 60 | Material and Labour for Cement plastering 5mm thick in cement mortar 1:3 on fair faces of concrete ceiling surfaces finished fair & even without using extra cement complete all as specified and directed by Engineer-in- Charge. |
| 61 | Supply only Liquid water proofing compound complete all as specified and directed by Engineer-in- Charge.Make : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after. |
| 62 | Complete removal of existing treatment of any type/description from walls/RCC surfaces/ceiling/chajjas/roof projections etc with mechanical means/grinder complete all as specified and directed by Engineer-in- Charge. |
| 63 | Material and Labour for applying acrylic wall care putty on internal surfaces and external surfaces of walls/ceilings/soffits (thickness vary from 1.5 to 2.5 mm as required for desired smoothness and leveling of surfaces in two or more layers) by using ready made acrylic wall care putty including sand papering after filling the putty to make surface smooth and ready for receiving painting etc complete all as specified and directed by Engineer-in- Charge.Make of acrylic wall care Putty : AS descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after.Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order. (ii)The make of acrylic wall care putty shall be as per the recommendation of manufacturer of paint. |
| 64 | Material and Labour for Preparation of existing surfaces and applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10.00 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including one coat of interior emulsion primer @ 10.00 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 65 | Material and Labour for Preparation of existing surfaces and applying 02 coats of exterior emulsion paint (light shade as approved by GE) with highlighter of any approved shade, @ 5.00 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 66 | Material and Labour for Preparation of new surfaces and applying 02 coats of exterior emulsion paint (light shade as approved by GE) with highlighter of any approved shade, @ 5.00 sq.m/litre/2 coats by using roller to external walls/RCC surfaces/soffits of chajjas/roof projections/cantilevers/balcony etc surfaces over & including one coat of exterior emulsion primer @ 11 sq.m/litre/1 coat as recommended for under coat by manufacturer of exterior emulsion by using the brands of exterior emulsion paint and exterior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 67 | Material and Labour for Preparation of new surfaces of walls and applying 02 coats of interior emulsion paint (light shade as approved by GE ) @ 10.00 sq.m/litre/2 coats by using roller/brush to wall surfaces over & including one coat of interior emulsion primer @ 10.00 sq.m/litre/1 coat as recommended for under coat by manufacturer of interior emulsion by using the brands of interior emulsion paint and interior emulsion primer as descriped in LIST OF MAKES/MANUFACTURERS under Appendix 'B' here-in-after complete all as specified and directed by Engineer-in- Charge. |
| 68 | Material and Labour for for preparing new plastered surfaces of ceilings and applying three coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the last two coats of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and directed by Engineer-in- Charge. |
| 69 | Material and Labour for for preparing existing treated surfaces of ceilings including cornices and applying two coats of white wash by making the lime slaked at site and shall be mixed and stirred with about five liters of water for 1 kg of unslaked lime to make a thin cream. This shall be allowed to stand for a period of 24 hours and shall then be screened through clean coarse cloth. 1 kg of gum dissolved in hot water shall be added to every one cubic meter of lime cream. About 1.3 Kg of sodium chloride dissolved in hot water shall also be added for every 10 kg of lime for making the coating hard and rub-resistant. Small quantity of ultramarine blue (upto 3 gm per kg of lime) shall also be added to the of white wash solution and the whole solution shall be stirred thoroughly before use complete all as specified and as directed by Engineer-in-Charge. |
| 70 | M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer. |
| 71 | Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr In Charge |
| 72 | M & L for Double charge stain free Vitrified ceramic tiles, Premium (1st) quality straight edge, coloured tiles having size not less than 595x595 mm and 8 mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match coloured tiles including and over 20 mm thick screed bed in CM 1:4 and pointed in epoxy grout to match in floors complete as directed by Engineer-in-Charge. |
| 73 | All as per Item No 71 here in before, coloured tiles 595x100 mm and not less than 8 mm thick on vertical surfaces such as skirtings, set & jointed in neat and pointed in epoxy grout to match the floor tiles, over & including 10 mm thick screed in cement mortar (1:4) complete as directed by Engineer-in-Charge. |
| 74 | M&L non skid ceramic coloured tiles Premium (1st quality) straight edge, size not less than 395x395x7 to 8 mm thick in floors etc in any shade, set & jointed in neat cement slurry & pointed in matching coloured polymer based epoxy grout to match over & including 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed |
| 75 | M & L glazed ceramic coloured tiles of size 300x600x7 mm thick on vertical surface as in dados, skirting etc, set and jointed in neat cement slurry over and including 10mm thick plaster in cement mortar 1:4, pointed with white/ coloured cement to match complete all as specified and as directed.. |
| 76 | M&L Kota stone slab 18-20 mm thick in tread/riser of steps, skirting, dado & pillar over and incl 20mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & mirror polishing complete |
| 77 | M&L for Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms with polishing and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 78 | M&L Baroda Green Marble work 15-16 mm thick (table rubbed and polished) in shelves/steps, landings, cills, skirting borders, jambs, pillars, windowcills, cooking plateforms with polishing and like in cement mortar (1:4) including pointing in white cement (1:2)using marble dust with admixture of pigment to match with marble shade complete all as specified and directed |
| 79 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations etc complete all as specified and as directed. |
| 80 | Demolition of ( PCC) cement concrete of any description in ground floor in any position not exceeding 15 cm thickness complete all as specified and as directed |
| 81 | M & L 75mm thick PCC 1: 3: 6 type C-2 ( using 40mm graded stone aggregate ) in plinth protection, including finishing the surface even and smooth without using extra cement. |
| 82 | Demolition of RCC of any description and any position not otherwise specially provided complete all as specified and directed. |
| 83 | M&L for RCC 1:2:4 type B0 12.5 mm graded stone aggregate as in chajjas,papapet,fins,facias,cupboard shelves etc complete all as specified and directed |
| 84 | M&L for MS TMT bars 6mm to 8mm dia and over,cut to length ,bent to shape incl binding with MS annealed wire not less than 0.9mm dia complete all as specified and directed |
| 85 | M&L for use and waste form work to soffits and sides of chajjas /parapets /cupboard shelves etc. of flat fair finished surfaces of concrete ,etc complete all as specified and directed |
| 86 | Excavation in trenches in soft / loose soil not exceeding 1.5 meter wide & not exceeding 1.5 meter in depth for foundations of manholes, sewerage pipe lines etc including getting out complete all as specified and as directed by Engineer-in-Charge . |
| 87 | Returning/filling in including spreading, leveling , watering & well ramming in layers not exceeding 25 cm thick each all as specified and as directed by Engineer-in-Charge. |
| 88 | Demolition and breaking up drain pipes SGSW,AC or reinforced concrete pipe up to and incl 150 mm bore pipes all as specified and directed by Engineer-in-Charge. |
| 89 | S & F for providing, lowering and laying HDPE DWCPE (SN8) pipes as per IS : 16098 of 2013, 150 ID mm bore, laid and jointed with and including elastomeric sealing 'O' ring as per manufacturer's instructions complete including demolition of existing line all as per specified and directed. (Note - The rates include for laying pipes level or to falls in trenches, etc. on concrete bed or directly on hard ground as indicated and making joints and testing as specified.The rates include for all necessary extra joints, waste, and cutting etc.) |
| 90 | Material & labour for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate to drain pipe incl packing under & hunching against the sides of pipe 150 mm dia ( internal) after they are laid and tested in trenches complete all as specified.. |
| 91 | Cutting into existing manholes for connecting new drains,making good to pipe and rendering ,cutting out existing benching for as specified dia of 150mm all as specified. |
| 92 | Removing excavated soil not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete. |
| 93 | Supply and fixed in repairs 15mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plqated, fancy type, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed by Engr In Charge |
| 94 | Material and Labour for Cleaning all existing reinforcement bars in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items with wire brush/rotary wire brush to make entire circumference surface of bars free from rust scales, loose material, dirt etc., complete and applying alkaline rust converting primer on the existing rebar and allowing it to react with rust for 6 hrs and form a corrosion resistant, insoluble and adherent protective layer including cleaning the reinforcement, wire brushing to remove the rust spalls, complete all as per manufacturer’s instructions, complete all as specified and as directed by Engineer-in-charge.Note :- Mode of measurement : per sqm of breaking area of concrete only. |
| 95 | Material and Labour for Providing and application of Zinc rich epoxy anti-corrosive protective coating for reinforcement bars as corrosion protection system in 2 coats to the entire circumference surface of bars (consumption Qty as per manufacturer's instructions but min 0.4 kg/Sqm approx) in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as specified and directed by Engr-in-charge. The product should confirm carbonation resistance of 2 mm and bond strength > 1N/sqmm according to ASTM C 882-78 complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge.Note :- Mode of measurement: per sqm of application area of concrete. |
| 96 | Material and Labour for Apply SBR based bonding agent to the entire concrete surface prior to building up of concrete with Polymer modified mortar or any other treatment , including cleaning the surface to remove dirt, dust or any other impurities on the surface, etc. complete in Roof, Ceiling, Chajja, Fascia, Fins, Drops and similar items complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge. |
| 97 | Material and Labour for Rebuilding the section of structural damaged RCC/PCC elements of Roof, Ceiling, Chajja, Fascia, Fins, Drops repair to spalling concrete to its original size and shape in layers of 10 mm average thickness in 1st layer by providing and applying with pre-batched, one component fiber based repair mortar having compressive strength >= 50 N/sqmm (28 days) according to ASTM C 109; flexural strength >= 5N/ sqmm (7 days) according to ASTM C 293-79 complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge. |
| 98 | Material and Labour for Rebuilding the section of damaged RCC/PCC elements to original size in thickness upto 100 mm by supply nd casting with ready to use non shrink cemneticious free flow micro concrete having compressive strength >= 50 N/sqmm (28 days) according to ASTMC 1107-99; including mixing , placing and levelling the surface by granding of cementicious sslurry or cementicious joiints difference if any and curing incl necessary form work , complete all as per manufacturer's instructions , complete all as specified and as directed by Engineer-in-charge. |
| 99 | S&F Mild steel Framed work hollow sections and fastenings complete using ERW such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors,ladders; framed balusters; walkways, railings, framework of water tanks, Drain covers , gate and similar work including embeding in concrete and screwing,ERW or welding etc. complete all as specified and as directed by the Engineer-in-Charge |
| 100 | Taking down carefully/aluminium point wiring (light, fan, socket or power point ) complete including fitting such as hylem sheet switches, ceiling rose, pendent holder sockets, regulator except concealed conduit and sunken boxes etc and making good distrubed surfaces of wall and floors etc to match with the existing, complete all as specified and directed by Engineer-in-charge. |
| 101 | M & L for point wiring complete modular type with 1.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and sockets , fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 1.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , and provision of suitable module plate ,plate cover etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. |
| 102 | All as per item No 101 here in before but for socket outlet 3 pin 5/6 Amp on same board, complete all as specified and directed by Engineer-in-charge. |
| 103 | All as per item No 101 here in before but for socket outlet 3 pin 5/6 Amp on independent board but not below the switch board, complete all as specified and directed by Engineer-in-charge. |
| 104 | All as per item No101 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 2.5 Sqmm, multi stranded copper conductor FRLSH cable including provision of 2.5 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge. |
| 105 | All As per item No 101 in before but for bell/buzzer point, complete all as specified and directed by Engineer-in-charge. |
| 106 | All As per item No 101 in before but for one light point controlled by Two Two way switch, complete all as specified and directed by Engineer-in-charge. |
| 107 | Supply and fixing modular Switch 1 way 6A ,1 module 250 volts AC one way ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 108 | Supply and fixing modular Socket 6 A-2/3 pin combined 2 module shuttered 250 volts AC ISI, marked model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 109 | Supply and fixing modular Switch 1 way 16 A,1 module 250 volts AC ISI marked , model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 110 | Supply and fixing modular Socket 6A/16A-2/3 pin combined,2 module 250 volts AC shuttered ISI marked, model fantasy with suitable frame and covers with matching colours, complete all as specified and directed by Engineer-in-charge. |
| 111 | Supply and fixing modular Switch 2 way 6A, 1 module 250 volts AC ISI marked, model fantasy with suitable frame and covers witch matching colours, complete all as specified and directed by Engineer-in-charge. |
| 112 | Supply and fixing in replacement of modular Bell push, 6 amp 250 Volts, complete all as specified and directed by Engineer-in-charge. |
| 113 | Supply and fixing in replacement of modular type electronic fan regulator flush type on existing sheet, complete all as specified and directed by Engineer-in-charge. |
| 114 | Supply and fixing Lamp holder of PVC/Polycarbonate type with 9/10 watt led bulb and back plate suitable for batten fitting all as specified and directed by Engineer-in-charge. |
| 115 | Supply and fixing in replacement of ceiling rose 3 phase flush type 6 Amp 250V AC topline series with polycarbonate 20 X 50 mm two to three terminal, complete all as specified and directed by Engineer-in-charge. |
| 116 | Supply and fixing Electric / Electronic Bell, ding dong type 230 Volt AC supply, complete all as specified and directed by Engineer-in-charge. |
| 117 | Supply and fixing wall mounted Batten fitting square profile 20 watt white flux appx 4 feet long, pre wired complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. |
| 118 | Supply and fixing in replacement Batten fitting square profile type LED mirror light fiting 9/10 watt, 6000K, polycarbonate body and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector, complete all as specified and as directed by Engineer-in-Charge. |
| 119 | Supply and fixing in replacement Wall Mount Decorative Bracket Light fixture in cylindrical/doom profile made up of polycarbonate suitable for LED Lamp (B-22 base) and including LED 7/9 Watt lamp (100 lumens per watt), complete fitting with lamp and all other fixing accessories including electric connection including taking down old unserviceable light fittings any type at any site as directed complete all as specified and as directed by Engineer-in-Charge. |
| 120 | Supply and fixing wall mounted Batten fitting square profile 20 watt white flux appx 4 feet long, pre wired complete fitting and all other accessories fitting arrangements including electric connection connecting with using flexible copper wire twin core upto ceiling rose/connector including taking down old unserviceable light fittings any type complete all as specified and as directed by Engineer-in-Charge. |
| 121 | Supply & Fixing in replacement old type Ceiling fan to BLDC Ceiling fan of 1200mm sweep complete with aluminium / steel blades, down rods, including remote for speed controll and accessories, 230 Volts, single phase, 50 Hz, Min air delivery 210 CMM with service value 6.00 BEE. Five star rated with brushless direct current (BLDC) motor connecting up complete with and including three core flexible PVC insulated multi stranded copper conductor cable of suitable size from ceiling rose / connector, including extra GI / MS pipe down rod, as per site requirement , with and including serial number of fan as issued by Engineer-in-charge and GE office name with red colour permaent marker complete all as specified and directed by Engineer-in-Charge. Note: Old outdated celing fan shall be depostied in the store yard of AGE E/M (North) Bathinda Mil. Stn and old unservicable regulators shall be credited to contractor. |
| 122 | Supply and Fixing water heater (Geyser) Auto restrat and safety measures type electrical operated 230/240 Volts 25 ltr capacity, BEE 5 star rated complete with all safety equipment and accessories such as safety valve, thermostat, plug top, connection pipe (2 Nos) etc. required for proper functionality & including electric/earth connections and carrying out grounting & complete installations with mounting bolts,nuts including testing after installation complete complete all as specified & directed by Engineer-in- Charge. |
| 123 | Material and Labour for Making holes for 300 mm dia exhaust fan of suitable shape & size into or through brick walls at groung / First / Scond floor including plastering for making good to the disturbed portion as per original surfaces of any description including painting /distemper matching with the existing colour.Note : (i) Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site and nothing shall be paid extra on this account.(ii) Exhaust fan 300mm sweep shall be measured and paid seperately. |
| 124 | Supply and Fixing Exhaust fan 300mm sweep (Heavy duty) steel body, BEE, 5 star rated and electrical connection providing with twin core round copper conductor cable of suitable size,complete with louvers shutter all as specified and directed by Engr-in- Charge. |
| 125 | Material and Labour for Making holes for 250 mm dia exhaust fan of suitable shape & size into or through brick walls at groung / First / Scond floor including plastering for making good to the disturbed portion as per original surfaces of any description including painting /distemper matching with the existing colour.Note : (i) Rates are deems to be including charges of any type of T&P, Insurance of staff deployed at site and nothing shall be paid extra on this account.(ii) Exhaust fan 250mm sweep shall be measured and paid seperately. |
| 126 | Supply and Fixing Exhaust fan 250mm sweep (Heavy duty) PVC body, BEE, 5 star rated and electrical connection providing with twin core round copper conductor cable of suitable size,complete with louvers shutter all as specified and directed by Engr-in- Charge. |
| 127 | Material and labour for Sub main wiring complete with two single core 4 sqmm,1100 volts grade, PVC insulated, multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 4 sqmm in & including PVC conduit size 20mm including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Note: Three run of single core 4 sqmm copper cable will be considered as one running meter. |
| 128 | Material and labour for submain wiring complete with Four single core 10 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 10 Sqmm in & including (as directed) PVC conduit size 25/32 mm including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Note: Five run of single core 10 sqmm copper cable will be considered as one running meter. |
| 129 | Material and labour for submain wiring complete with Four single core 6 sqmm 1100 volts grade, PVC insulated multi stranded copper conductor cable FRLSH with continuous copper earth conductor of 6 Sqmm in & including (as directed) PVC conduit size 25/32 mm including taking down old unserviceable submain wiring, complete all as specified and directed by Engineer-in-charge. Note: Five run of single core 10 sqmm copper cable will be considered as one running meter. |
| 130 | Supply and Fixing of Kitchen chimney wall mounted type,stainless steel with powder coating hood with matt finish straight/curved shape and baffle filter,appx 1000 CHM air suction capacity and width x hight x depth of appx 60x37x39 cm ,operated on single phase AC 230V including all connecting accessories like duct suitable lenght and size for exhaust and making all fitting and connection as per site and making hole as per duct size in wall and including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. |
| 131 | Supply and fixing in replacement of Sheet metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB VTPN 8 way 415 Volt,(concealed in wall or as directed) protection class IP-54, dust and vermin proof suitable for incorporation of MCCB's upto 160 Amp and isolators etc including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. |
| 132 | Supply and fixing in replacement of Sheet metal enclousers made out of CRCA mild steel sheet, double door, powder coated DB VTPN 4 way 415 Volt,(concealed in wall or as directed) protection class IP-54, dust and vermin proof suitable for incorporation of MCCB's upto 160 Amp and isolators etc including making good disturbed surfaces of walls as necessaty complete all as specified and directed by Engineer-in-charge. |
| 133 | Supply and fixing in replacement of MCCB of capacity 100 Amp, FP, 415 volt, short circuit breaking capacity not less than 16KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc , MCCB fixing in new DB or the existing DB/Panel including making incoming, outgoing connections complete all as specified and as directed by Engineer-in-charge . |
| 134 | Supply and fixing in replacement of MCCB of capacity 125 Amp, FP, 415 volt, short circuit breaking capacity not less than 16KA , thermal magnetic trip, setting 80-100%, Icu-100% Ics confirming to IEC-947, IS-13947, including thimbles, nuts, bolts, washers etc , MCCB fixing in new DB or the existing DB/Panel including making incoming, outgoing connections complete all as specified and as directed by Engineer-in-charge . |
| 135 | Supply and fixing in replacement (concealed in wall or as directed) factory made DB (made out of CRCA sheet) TPN, 4 Way 415 V (8+12 modules), double door, earth bar, copper bus bar 200 Amp and neutral link, protection class IP-54 suitable for mounting MCB/Isolator, conforming to IS-8623, BS-5484 dust and vermin proof, including taking down unserviceable old DB any type including MCB etc and including making good disturbed surfaces of walls as necessaty, complete all as specified and directed by Engineer-in-charge. |
| 136 | Supply and fixing (Concealed with wall) single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amps, 240 volts, AC/Gyeser supply including taking down old unserviceable enclosure, complete all as specified and directed by Engineer-in-charge. |
| 137 | Supply and fixed MCB SP suitable for 230 volts AC supply 6 to 32 Amps, SP rupturing capacity not less than 10KA,' C' Curve ISI Marked, 1 Module including taking down old unserviceable MCB SP, complete all as specified and directed by Engineer-in-charge. |
| 138 | Supplying and fixing MCB TPN 40-100 Amps 415 Volt AC, C curve, 4 module capacity not less than 10 KA including taking down old unserviceable MCB TPN, complete all as specified and directed by Engineer-in-charge. |
| 139 | M & L for point wiring complete modular type with 2.5 sqmm (nominal cross section area ) FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked ) drawn through and including PVC rigid conduit 20mm dia( heavy duty ) with all fittings and all accessories i.e pipe bend pipe hook, elbow,junction box, pressed steel powder coated sunken boxe of suitable for mounting modular switches and sockets , fan regulator, for light/fan point controlled by one switch, top cover fixed with brass screws & cup washers including provn of 2.5 sqmm FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly , and provision of suitable module plate ,plate cover etc including cutting chases in wall and making good distrubed surface of wall/ceiling/floors etc by using CM (1:3 ) to matching with existing surface complete all as specified and as directed by Engineer-in-charge. |
| 140 | All as per item No 101 here in before but for one socket outlet 6 pin, 6/16 Amp multipurpose 2 in 1 on independent board with cable of 4 Sqmm, multi stranded copper conductor FRLSH cable including provision of 4 Sq mm PVC insulated solid copper conductor FRLSH cable continuos as earth wire connected to earth dolly, conductor etc., complete all as specified and directed by Engineer-in-charge. |
| 141 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified and as directed by Engineer-in- charge. |
| 142 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified and as directed by Engineer-in- charge. |
| 143 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45 x 70mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges as specified and as directed by engr-in charge |
| 144 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 65x 125 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl S&F (03 Nos Per Frame ) 100 mm long SS Butt Hinges Including taking down of existing door frame and making good with plastering/rendering etc around the finished opening of the disrubed surface with CM 1:4 complete as specified and as directed by engr-in charge |
| 145 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl S&F of 02 Nos (per Leaf) SS 150mm long Tower Bolt and S&F of 02 Nos (per Leaf) SS 150mm long handle and S& F -01 Nos ( Per Leaf) SS 150mm Long Floor Door stopper and S& F -01 Nos (Per Leaf) SS 300mm long Sliding Door Bolt Complete all as specified and directed by engr-in charge |
| 146 | S&F Factory Made 30mm thick 100% Solid WPC ( Wood polymer Composite ) Wiremesh Door Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension rade ), calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured by \\"RAJSHRI\\" an ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter. For fixing Mosquito mesh and XTN aluminium mesh combinly panel area of door except stiles and rails to be panelled with mesh with self tapping round headed scresws at required distance, scres and edges covered with feathered pvc edge beading all around of mesh and fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engineer -In-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For Internal/Balcony/Main Doors. Note :- including 3 Nos for each door Stainless steel 100mm long but hings with Stainlessd steel screws, 2 Nos stainless steel barrel tower bolts of extrude section, 150mm long (ISI marked), 2 Nos stainles steel handles, 125 mm long, (ISI marked) , 01nos of helical door spring of 300 mm legth and S& F -01 Nos ( Per Leaf) SS 150mm Long Floor Door stopper and S& F -01 Nos (Per Leaf) SS 300mm long Sliding Door Bolt Complete all as specified and directed by engr-in charge. |
| 147 | Supply & fixing Factory made single extruded WPC (Wood Polymer Composite) solid plain cupboard flush door shutter of 20 mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per directio of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 148 | M & L Providing and fixing factory made uPVG white colour Sliding window area exceeding 2.00 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note :- 5mm thick Toughned Glass and Stainless steel wire shall be Included in This item Nothing Shall be paid Extra in this Account. Net Opening will Be measured for Payment Purpose |
| 149 | M & L Providing and fixing factory made uPVG white colour Sliding window area n. exceeding 2.00 Sqm Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note :- 5mm thick Toughned Glass and Stainless steel wire shall be Included in This item Nothing Shall be paid Extra in this Account. Net Opening will Be measured for Payment Purpose |
| 150 | Demolition of cement concrete and digging out (unreinforced) as in sunken floor area of any description and in any position and including removing rubbish material from building and thrown in low lying empty area at any distance as directed from the site complete all as specified and as directed. |
| 151 | Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one method complete all as specified and as directed.Method 1 (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand). Making Gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 Cement : 1 Polymer : 4 Sand). The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.(B) Bore Packing: All the borehole gaps between concrete surface and PVC pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – Smart Care GP Grout having dual shrinkage compensation property. Before the bore packing, surface of the PVC pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent.(C) Apply12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml per bag of cement before treatment.(D) 40 mm dia HDPE pipe to be provided as spout pipe in sunken portion.Method 2 (A) Supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm with a paint brush over existing slab surface and adjoining vertical surface. The Polyester reinforced coated net of 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k. After removal of all lose materials like dust etc. with wire brush coir brushes from surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based mortar/micro concrete, after that making the gola on surrounding wall’s junction and seal the vertical walls. In case of core cutting on the surface, the joint is seal with non-shrink grout.(B) The coating shall be terminated at 1600mm in toilet/2100mm in bathroom on vertical walls.(C) Apply12-15mm water proof plaster on slab and vertical surface admixed with Dr Fixit pidiproof LW+ @200ml per bag of cement before treatment.(D) 40 mm dia HDPE pipe to be provided as spout pipe in sunken portion.Make : Method 1 (Asian paint)/ Method 2 (Dr fixit) or Techno commercial equivalent in make mentioned in Appx 'B' approved by CWE Note :- (i) The treatment shall be carried out by authorised applicator (through specialized agency ) approved by CWE as per the manufacturer.(ii) PCC filling under sunken area will be measured & paid separately (iii) Treatment should be conitue upto 450mm height on vertical wall (all sides and floor) of sunken but only plan area of sunken will be measured for payment. |
| 152 | Material and labour for water proofing treatment to walls surfaces (above sunken) of toilets/baths (1600mm in toilet and 2100mm in bathroom on vertical wall surface) with following applications complete all as specified and as directed by Engineer-in-Charge :-(a) Applying first coat of chemical pidifin 2K (Dr Fixit) on cleaned surfaces @ 0.86 Kg/Sqm (Minimum) and drying for 24 Hours(b) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) over first coatMake : Dr fixit or Techno commercial equivalent in make mentioned in Appx 'B' approved by CWE |
| 153 | Material and labour for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard specification IS:2185(Part-3)-1984 and latest revision built in Cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curver on plan exceeding 6mtr Mean radius as in sunken floor complete all as specified and and as directed by Engineer-in-charge. |
| 154 | Dismantling of floor hearth or wall tilling including cement mortar bedding but not backing including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 155 | M&L anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size of each tile exceeding 0.11 Square Metre but not exceeding 0.18 Square Metre, in floors and Skirting etc. including 10 mm thick bedding layer in cement mortar (1:4) using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed.Make :- Johnson or equivalant from Kajaria/ Somany as per manufacturer s instructions. |
| 156 | Providing and Laying Premium (1st) quality digitally printed straight edge, punched, glazed ceramic rectangle tile in approved shade and finish with flexural strength greater than 16 N/mm2, scratch hardness on Moh’s Scale minimum 3 and crazing resistance of 2 cycles in coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) using type-I adhesive (thick bed fixing) confirming to IS-15477:2004and pointed in white cement with pigment to match the colour of tiles complete all as specified.Note : Dado should be flushed with the wall plastering.Make : Johnson (Digital HD Tiles) (Barstow DK/LT/HL for Toilets & Verona LT/HL for Kitchens) or equivalent from Kajaria/Somany as approved by AO |
| 157 | Material and Labour for Virified Ceramic tiles Dark shade 10 mm thick (square/ rectangular) polished, area ofeach tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchshade and colour as approved by GE , in floors etc set and including 10 mm thick bedding layer in cement mortar (1:4) using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scall and abrasion resistance of class V complete all as specified.Make :- Johnson ( Digital HD Tiles) Barstow DK / LT / HL for Toilets ) or equivalant from Kajaria/ Somany as per manufacturer s instructions |
| 158 | All as per Item No -18 above but on vertical surfaces as in skirting etc set and including 10 mm thick bedding layer in cement mortar (1:4) using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured cement to match the shade of tile including necessary cutting as per site requirement having scratch hardness of surface min 6 on Mohs Scall and abrasion resistance of class V complete all as specified.Make :- Johnson ( Digital HD Tiles) Barstow DK / LT / HL for Toilets ) or equivalant from Kajaria/ Somany as per manufacturer s instructions |
| 159 | Supply & fixing 600 mm long PVC connection 15mm size with PTMT nuts complete all as specified and as directed by Engineer-in-charge. |
| 160 | Supply and fixing in replacement stop valve/angle valve cast copper alloy, chromium plated fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 161 | Supply and fixing in replacement Jaquar Florentine High Flow Diverter Full Brass set (Coplete Diverter Set with Accessories) for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Make Jaquar and Equivalent |
| 162 | Supply and fixing in replacement jaguar KUBIX-Prime BASIN MIXER (HOT & COLD ONLY); Faucet type / Installation: WALL MOUNTED; Type of Lever: RIGHT HAND SIDE LEVER; Color/Finish: CHROME KUP-CHR-35233NKPM (Coplete Diverter Set with Accessories) for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. Make Jaquar and Equivalent |
| 163 | Supply and fix in repairs Jaquar Florentine Wall Mixer 3 in 1 (Cat No. FLR-CHR-5281N) with provision for both hand shower and overhead shower complete with 115 mm long bend pipe, connecting legs & wall flange (without hand & overhead shower) as per catalogue No FLR-CHR-5281N of Jaquar or equivalent of Make mentioned under Appendix \\"B\\" complete all as specified and as directed. |
| 164 | Supply and fix in repairs centre hole basin mixer without popup waste system but including plain waste 32 mm size with aerator, cast copper ally, chromium plated, screwed down high pressure with long screwed shanks and flu nuts screwed for iron pipes of 15 mm bore complete all as specified and as directed. |
| 165 | Supply and fixing in replacement concealed stop cock cast copper alloy, chromium plated, fancy type, long shank and cup, screwed both ends suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 166 | Supply and fixing in replacement 15mm bore Bib tap long body cast copper alloy, chromium plated fancy type, with crutch or butterfly handle with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified & directed by Engineer-in-charge. |
| 167 | Supply and fixing in replacement JAQUAR 2 Way Bib Cock with Wall Flange suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 168 | Supply and fixing in replacement Jaquar Shower Arm 400X25X25mm Square Shape for Wall Mounted Showers with Flange SHA-CHR-455L400 suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 169 | Supply and fixing in replacement Jaquar Stainless Steel Jaquar Bathroom Shower suitable for 15mm bore iron pipe complete, all as specified & directed by Engineer-in-charge. |
| 170 | Supply and fixing in repair vitreous china Wall hung EWC (Complete set) including flushing cistern, Seat Cover, Jet Spray and with all assembly /fittings and connection to drain (or outgoing pipe) complete all as specified and directed by Engr-in-Charge |
| 171 | Supply & fixing in repair vitreous china wash down water closet pan (pedestal pattern, EWC) P Trap white clour (excluding flushing cistern and flush pipe) including connection to drain etc., including plastic water closet seat with cover (white clour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 01 mtr long PVC pipe with CP connector and necessary nut bolts and with necessary CP screws and plug for fixing WC complete all as specified and as directed by Engineer-in- charge. |
| 172 | Supply only PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make. Make :Hindware (Sleek essence dual flush) / CERA (carreers) / Or Prayag (Vintage)/ or equivalant from Parryware |
| 173 | Material and Labour in repairs Thin Rim Table Top Basin, Size: 530x420x140 mm, Shape - Rectangular including 32mm chromium plated waste coupling and PVC waste pipe & fixing in granite slab complete all as specified and directed by Engr-in-ChargeNote : Granite shall be measured and paid separately under appropriate item of Schedule 'A' BoQ.. |
| 174 | S & F in Repairs CP chromium Jaquar Brass ALD-769L300X190 12 Inches Chrome Bottle Trap, Silver for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in 32mm bore of trap complete all as specified and as directed. |
| 175 | S&F in repair CP grating doom 125mm dia with/without waste hole (min weight 40gms) complete all as specified and directed |
| 176 | Supply and fix in repairs corner sheet glass shelf assembly consisting of 8 mm thick glass sheet shelf, 30 cm wide with chromium plated screwed down for fixing to wall with screws complete all as specified and as directed. |
| 177 | Supply and fix in repairs sheet glass shelf assembly consisting of 5.50 mm thick glass sheet shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and as directed. |
| 178 | Supply and fix in repairs health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 179 | Supply and fix in repairs brass, chromium plated toilet paper holder complete all as specified and as directed. |
| 180 | Supply and fix in repairsJaquar AKP-CHR-35731P Soap Dish Holder complete all as specified and as directed. |
| 181 | Supply and fix in repairs 15 mm nominal size, nonrising spindle of fancy type stop valves as per IS 8931: 1993 made of cast brass including Knob, knob components, divertor & components, nickel-chromium plated finish complete all as specified and as directed. |
| 182 | Supply and fix in repairs sinks with drainage board made of stainless steel 1 mm thick sheet kitchen or laboratory with plugs, washers and 40 mm nominal size, copper alloy, nickel chromium plated finish waste fittings with including silicone sealant; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipes overall size 915 mm X 460 mm bowel size 410 mm X 330 mm X 160 mm complete all as specified and as directed. |
| 183 | Supply & fixing in replacement brass chromium plated tubular towel rail 20mm dia 'D' type, 600mm long between flanges fixed to plug , bracket with chromium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 184 | Supply and fixing in replacement 600mm x 450mm size bevelled edge mirror selected quality 5mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including PVC frame alround made of PVC channel, complete all as specified and directed by Engineer-in-Charge. |
| 185 | Supply and fixing 1200mm x 600mm size bevelled edge mirror selected quality 6mm thick glass mounted on 6mm thick commercial ply and fixed to wooden plugs with chromium plated brass screws and cup washers, including aluminium frame / beading alround made of aluminium channel, complete all as specified and directed by Engineer-in-Charge. |
| 186 | Supply and fix in repairs PVC box type mirror cabinet selected quality of size 45 cm X 35 cm X 15 cm thick coloured fixed with min 04 Nos screws fixed on walls complete all as specified and as directed. (Make: Prayag Cat No 557 or equivalent of Make as mentioned under Appendix \\"B\\" ) |
| 187 | Supply and fixing stainless steel pipe 25mm bore (as a curtain rod), wall thickness of pipe not less than 1mm and grade SS 202, fixed in position with fixing accessories like Brackets, finial and side holder of same manufacturer including taking down old existing curtain rod any type complete all as specified and as directed.Note : (i) Brackets, finial and side holder shall be measured and paid separately for supply only but the cost for fixing the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account.(ii) Cost for screws, rawl plugs as required for fixing shall also shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 188 | Supply and fixing or laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old GI Pipe complete all as specified. complete all as specified and as directed by Engineer-in- charge. |
| 189 | Supply and fixing or laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down of old GI Pipe complete all as specified. complete all as specified and as directed by Engineer-in- charge. |
| 190 | Supply & fixing 110 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge including Taking down old AC eaves gutters and rain water pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge. |
| 191 | Supply & fixing 70 mm bore of pipe PVC (SWR) type B ring fit pipes single socket in any length with Stack clamps as shown in BTD Drg No. 916 sheet 1/4 to 4/4 and BTD-917 sheet sheet 1/1 of stays to wall at a distance of 100-120mm away from walls complete all as specified and as directed by Engineer-in- charge including Taking down old AC eaves gutters and rain water pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge. |
| 192 | S&F 110 bore, PVC SWR , bends , junction , TEE and Y (any radius), diminishing pieces or tapers (large bore measured) with oval access door as in repairs complete all as specified and directed. |
| 193 | Supply & fixing 100 mm bore of pipe UPVC Pipes (SCH-80) in any length as laid in floor complete all as specified and as directed by Engineer-in- charge including Taking down old AC eaves gutters and rain water pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge. |
| 194 | Supply & fixing 75mm bore of pipe UPVC Pipes (SCH-80) in any length as laid in floor complete all as specified and as directed by Engineer-in- charge including Taking down old AC eaves gutters and rain water pipes ( of any size and pattern) including all fittings, compete all as specified and as directed by Engineer - in-charge. |
| 195 | S&F 110 mm dia of long neck PVC SWR P trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed. Make :- Astral / Prince / Finolex. |
| 196 | S&F 75mm dia of long neck PVC SWR floor trap with grating incluing jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified and directed. Make :- Astral / Prince / Finolex |
| 197 | Supply & fixing 75 mm bore, PVC (SWR) fittings Type -B such as bends, tee, 'Y' etc ; fixed to PVC pipes, complete all as specified and as directed by Engineer - in-charge. |
| 198 | Dismantling brick tiles / PCC terracing tiles single layer laid on roof and pointed with cement mortar complete all as specified and as directed by Engineer-in-charge. |
| 199 | Demolition of mud from roofs, any thickness, including plastering and leaping (whether full thickness removed or only a part there of) including removing / cutting uprooting grass, vegetations and roots of small plants etc on roof floor and surrounding / parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge. |
| 200 | Material and labour for repair of surface with GP-2 (General Purpose Grout) or repair mortar upto 15mm thick as per site condition/ manufacturer’s instruction and including cracks shall be repaired with cement admixed with polymer as per manufacturer’s instructions complete all as specified and as directed.Make of material : Sika / Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. |
| 201 | M and L for cleaning surface of any loose dust, dirt or slurry by means of wire brush, dust removing brush etc. after preparation of surface treated with PU epoxy primer to seal the pores and enhance the adhesive of the coating, after primer applying single component waterproofing liquid membrane based on pure, polyurethane resin cold applied with spray, applied PU membrane shall be UV resistant with SRI (Sun Reflective Index) of 98 with an elongation of 650% +50 and tensile strength not less than 2Mpa. No leakage upto five bars of water pressure. Shore hardness >70 shall be 2.00mm (overall) DFT (Dry film thickness), In two or more layers (each layer minimum 750 micron) or as per manufacturer’s instructions so as to achieve thickness not less than 2.00mm DFT complete all as specified and as directed.Make of material : Sika / Fosroc / Pidilite / Asian Paints / MBTCC (BASF) / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list.Note: - (i) Payment will be made after providing warranty certificate for 10 years from the company. (ii) The thickness of the PU membrane shall be checked with cut and seal method and the third-party test to be carried out from NABL approved lab. The sample size for check should be 50x50mm randomly at any location and kept in record. |
| 202 | Material and labour for Providing PCC coving/ gola along vertical parapets of size 75 mm X 75 mm with concrete M20 (Nominal Mix) using 20 mm crushed stone aggregate including supply and mixing liquid WPC in mortar @ as per manufacturer instruction per bag of cement of 50kg complete all as specified and as directed. |
| 203 | Material and Labour for 10 mm thick, cementitious, polymer modified, 2-component repair mortar with added polyamide fibres in soffit of slabs, beam, columns, parapets, fins and facias at any height including preparation of substrate and applying, finishing as per the technical specifications and manufacturer's instructions complete all as specified and as directed. Note: - Two components mortar shall be MonoTop®-122 F of Sika or equivalent of Fosroc /Pidilite Dr Fixit / MBTCC (BASF) / I-CanNano. |
| 204 | Material and Labour for Making 'V' groove of 15mm wide and 10mm deep over crack line by electrically operated angle grinder with diamond concrete saw blade and cleaning it by air blower and Sealing of exposed 'V' groove with solvent-free, moisture tolerant thixotropic, two part structural adhesive and repair mortar, based on epoxy resins and special fillers, designed for use at temperatures between +10°C and +40°C, according to ASTM C 88 1-78, Type I, Grade 3, Class B+C, compressive strength >60 N/mm2 (14 days) according to ASTM C 881 : bond strength > 10 N/mm² (7 days) according to ASTM C 882 including all required scaffolding/ladders complete all as specified and as directed.Make: Sika / Fosroc / Pidilite Dr Fixit / MBTCC / I-CanNano or Techno commercial equivalent make approved by CWE in writing from make mentioned in Appx 'B' / E-in-C's Br approved list. |
| 205 | M&L For PCC Padding to matain roof Slope and benching with PCC (1:2:4) type B0 using WPC as per manufacturer's instruction along side wall adjoining to roof in concave shape complete all as specified and directed. Note : WPC shall be measured and paid separately. |
| 206 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge. |
| 207 | Material and labour for plastering 15mm thick with ready mix cement plaster material on external surface of Brick walls/chajja/fins or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 208 | Material and labour for plastering 12mm thick with ready mix cement plaster material on internal surface of Brick walls or concrete surfaces, finished even and fair complete all as specified and as directed. |
| 209 | Material and labour for plastering 5mm thick with ready mix cement plaster material on concrete surfaces of ceiling, finished fair and even complete all as specified and as directed. |
| 210 | Material and labour for Complete removal of existing treatment of any type/description (any layer) from external/internal walls/RCC surfaces/ceiling/chajjas/roof projections surface etc., by scraping steel patti or mechanical sander/grinder machine having suction vaccum bag (samart periodical methodology) complete all as specified. |
| 211 | Material and labour for preparation of new plastered surfaces, surface´after complete removal, applying acrylic putty on internal surfaces of walls/ceiling/soffits etc (thickness vary from 1.5 to 2 mm as required for desired smoothness and levelling of surfaces in two or more layers) by using readymade putty, including sanding with wall sander after filling the putty in first coat/second coat to make surface smooth and ready for receiving interior/exterior painting complete all as specified and as directed. Notes : (i) The prepared surface after wall putty, the contractor will inform to the GE as well as to the Engineer-in-Charge for site inspection before applying further finishes. Please note that the further finishes work will start only after approval of the prepared surface from the GE as well as to the Engineer-in-Charge through site order.Make of acrylic Putty: - Berger / Asian / Nerolac |
| 212 | Material and labour for applying 02 coats of interior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 14.5 sq.m/litre/2 coats to wall surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using paint roller brush complete all as specified and as directed.Note ;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Silk Glamour of Berger / Royal Aspira of Asian / Impression Eco Clean of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 213 | Material and labour for applying 02 coats of interior acrylic emulsion paint of white shade (Company Depot Tinted) @ 7.50 sa.m/itre/2 coats to ceiling surfaces (new or old prepared internal surface after complete removal and applying putty) over and including a coat of interior primer @ 10.50 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and| primer applying by using paint roller brush complete all as specified and as directed.Note;- Complete removal and putty shall be measured and paid separately under respective item of BOQ.Brand and Make of interior acrylic emulsion paint: - Bison Acrylic Emulsion of Berger / Tractor Emulsion of Asian / Beaty Smooth of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 214 | Material and labour for applying 02 coats of exterior acrylic emulsion paint of approved tint/shade (Company Depot Tinted) @ 6 sq.m/litre/2 coats to external walls / Soffits of Chajjas / Roof Projections / Cantilevers / Balcony etc. (new or old prepared external surface after complete removal) over and including a coat of exterior primer @ 11 sq.m/litre/1 coat (primer shall be same make as acrylic emulsion paint), paint and primer applying by using airless spray gun complete all as specified and as directed.Note ;- Complete removal shall be measured and paid separately under respective item of BOQ.Brand and Make of exterior acrylic emulsion paint: - Weather Anti Dust of Berger / Apex Ultima of Asian / Excel Mical |Marble of NerolacBrand and Make of interior primer: - Seal O Primer of Berger / Smart Care Primero of Asian / Excel Alkali Prime of Nerolac |
| 215 | Material and labour for preparation of old decorated surfaces (plastered/unplastered) of ceiling by remove / scraping down all loose particle, smoke soot, moulds, moss & efflorescent salts, oil & greasy spots etc with using broom / steel patti / wire brush / sand papering or by any other mean with and including applying 2.5mm thick one coat cement based wall care putty to complete surface of wall to make the surface even and smooth and applying two coat of white wash with paint brush up to the entire satisfaction of Engineer -in-Charge complete all as specified and as directed by Engineer-in-Charge. |
| 216 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate complete all as specified and as directed by Engineer-in-charge.The weight of scrap iron for schedule of credit shall be ascertain by BOO as ordered by GE.The copy of BOO duly countersinged by GE shall be enclosed with final Bill. |
| 217 | Material and labour for RCC 1:2:4, (Nominal Mix) Type-B-1, using 20 mm graded stone aggregates as in chajjas complete all as specified and as directed by Engineer-in-charge. (Note : Reinforcement and form work work shall be measured and paid for separately under appropriate item of this schedule. |
| 218 | Material and labour for form work to chullah hoods, chajjas, troughs and similar items including edges on rough finished flat surfaces of concrete complete all as specified and as directed by Engineer-in-charge. |
| 219 | Material and labour for mild steel TMT bars 10mm dia and over cut to length bent to shape, required including cranking, bending spirally for hoping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia including making of rungs, handles etc complete all as specified and as directed by Engineer-in-charge. Note : Weight of binding wire shall not be considered for measurement and payment purpose. |
| 220 | -Ditto as per item No 79 but 08mm dia |
| 221 | Material and labour old size brickwork with subclas 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed by Engineer-in-charge. |
| 222 | Supply and fixing in replacement three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories including 40mm overflow pipe including necessry hanging arrngement of overflow pipe upto ouside of parapet wall complete all as specified and as directed by Engineer-in-charge. Note: Ball valve valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball 20 mm bore shall be measured and paid seperately as supply and fixing under appropriate item and including taking down of old existing water tank, any Capacity |
| 223 | Supply and fixing in replacement three layers 500 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories including 40mm overflow pipe including necessry hanging arrngement of overflow pipe upto ouside of parapet wall complete all as specified and as directed by Engineer-in-charge. Note: Ball valve valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball 20 mm bore shall be measured and paid seperately as supply and fixing under appropriate item and including taking down of old existing water tank, any Capacity |
| 224 | supply and fixing in repair and Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) of three layers 1000 litre HDPE water storage tanks polyproof. white in colour rotational moulded polyethylene (cylindrical vertical with closed top) hoisted and fixed in position including Supply and fixing of suitable size inlet/outlet arrangement & other accessories including 40mm overflow pipe including necessry hanging arrngement of overflow pipe upto ouside of parapet wall complete all as specified and as directed by Engineer-in-charge. Note: Ball valve valve high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball 20 mm bore shall be measured and paid seperately as supply and fixing under appropriate item and including taking down of old existing water tank, any Capacity |
| 225 | Supply & fixing in replacement Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified and as directed by Engineer-in-charge. |
| 226 | Demolition stone/marble slabs of any description or thickness as in floors/ cooking platform Meter/steps etc. laid bedded and pointed in any mortar including removing rubbish material from the site complete all as specified and as directed by Engineer-in-charge |
| 227 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plate /cooking plate form , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting as required including cleaning and extra polishing if required complete all as specified and as directed by Engineer-in-Charge. |
| 228 | Drilling Holes of 12mm dia up to 100 mm deep holes in slab at the interval of 300 mm or as directed by Enginner-in-charge in staggered manner or along the crack line in Reinforced Concrete (RC) structural element including cleaning of the holes by air blower and inserting 12mm dia NRV (Non Returnable Valve) nozzle compatible with epoxy injector and having machined external end to receive outlet of Grouting Gun. Fix inside the hole by applying thixotropic epoxy adhesive to ensure complete sealing and allow curing the system for minimum of 8 Hrs before Grouting including nozzle projections, excess putty, if any, over concrete element by grinding, leveling and finishing the external surface, after completion of the work, etc. complete all as specified and as directed by Engineer-in-charge. |
| 229 | Supply and Grouting, injecting two part, low viscosity, moisture insensitive injection liquid, based on high strength epoxy resin by pressure and using pressure epoxy injector with accessories till nozzle refused to accept the grout including mixing of grout for column, beam and roof slab having following properties:- (i) Mixed Density 1.1 kg/l (at +27°C); Viscosity ~ 250 mPas at +30°C and should comply according to ASTM C 881, Type II and IV, Grade-1, Class E+F (ii) Compressive strength >= 70 N/sqmm (7 days) according to ASTM D 695; Tensile Strength >= 30 N/sqmm (after 7 days at +30°C cure) (According to ASTM D 638); (iii) Bond Strength ~ 10.8 N/sqmm (failure in concrete) after 14 days at +30°C cure; Flexural strength ~ 50 N/sqmm according to ISO 178. (iv ) Seal the nozzle with thixotropic epoxy adhesive after the refusal of grout material from the nozzle. Note:- leakage through other nozzle or cracks are required to be monitored while grouting and such points to be sealed as and when required without any extra cost complete all as specified and as directed by Engineer-in-charge.Note :- Mode of measurement: per kg of material consumedMake:- Sika-Sikadur 52LP (IN) / Fosroc-Conbextra EP10 /Asian SmartCare APCOREP inject Grout or Techno commercial equivalent in make mentioned in Appx 'B' |
| 230 | Material and labour for fabricating & fixing modular kitchen (Kitchen cabinet bottom unit, over head wall unit, loft unit etc) made out of 16mm thick WPC board, minimum density 600kg/Cum, including fixing with solvent cement adhesive and screws to form cabinet, shelves, drawers and other accessories in modular kitchen cabinet and fixing to wall using rawl plug, to ready made fittings with suitable fasteners, provided 3 inch adjustable legs for bottom unit carecase, WPC shelves fixed with support bottom/brackets/cleats as required complete all asspecified and directed.Note : (i) Accessories such as soft close hinges, Innotech drawer, handles shall be measured and paid separately as supply only but labour for fixing the same and other minor items not otherwise described shall be deemed to be included in the unit rate quoted.(ii) The actual net area of WPC board (All sides of cabinet) as fixed at site shall be measured for payment.(iii) The 3D design/drawing of the modular kitchen/cabinets etc shall be provided by the GE before execution of the work.Make of WPC board :- Floresta gold series or Techno commercialequivalent in make mentioned in Appendix 'B'. |
| 231 | Supply and fixing Kitchen Rack /Dash Rack of size 914mmx787mmx250mm (Appx size) glossy finish made out of Food grade Stainless steel 0.60mm thick sheet/strip including necessary arrangements for plates and utencils to keep (Holds upto many plates or bowls To accommodate several place settings, multipurpose), stylish modern streamline design, rust resistant, easy to assemble and clean including fitting accessories, fixed in position as directed with SS screws/fasteners etc complete all as specified. |
| 232 | Supply only 18mm thick high density highmoisture resistant (HDHMR) exterior grade board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing (BSB) with density of 850 kg/cum for frame and shutters for kitchen cabinet / cupboards etc including dismantling old boards complete all as specified and directed by Engineer-in-charge. Make : Action Tesa/Green panel/Century (Note : Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates). |
| 233 | Supply only auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position. Make : KAFF/Hettich |
| 234 | Supply only ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified. Make : KAFF/Hettich |
| 235 | Supply only ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions complete all as specified. Make : Hettitch or equivalent as approved. |
| 236 | Supply only D type cabinet handles premium quality stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified : Make :-Harrison (Jasmine) or equivalent as approved. |
| 237 | Supply only stainless steel finished locks (double action) with 02 Nos key min outer body size 75mm suitable for wardrobes / CB etc. complete fixed in position all as specified. . |
| 238 | Supply fix in repair stainless steel modular kitchen basket in PVC cabinet on reqd size17” x 20” x ht 6’ for cutlery (bowl, tumbler and like) with wired bottom using 6mm rod for grade 304 stainless rod as per approved design and pattern incl necessary drawer slides of required size and chromium plate folding handles 75mm size for drawersy complete all as specified and directed. |
| 239 | Supply and fix in repair door seal with brown aluminium frame 20 mm width and 0.50 mm thick with nylon brush all over width 30 mm and length of door seal 0.90 to 1.20 m fixing for aluminium/wooden door complete all as specified and as directed. |
| 240 | S&F 12 mm thick toughened glass Sliding Door in required size crystal polished at the edges and with full etched design as approved by GE in different colours fixed with SS brackets of size 50x25mm,100mm long made out of 3mm thick SS sheet at the top and bottom including provision of Dorma XLC fittings & Dorma floor springs or SS pivot, stainless steel handles 600mm D type and locking arrangement to each door, stainless sliding Picvot to connect glass to glass, wall to glass connector, magnetic seal, middle seal and the water dispenser etc all as specified and directed by Engineer in charge. |
| 241 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out and getting out in soft / loose soil complete all as specified & directed. |
| 242 | M&L for hard core of gauge n exc 63mm deposited spread and levelled in layers n exc 15cm thick watered and rammed to a true surfaces of broken stone or boulder complete all as specified and directed. |
| 243 | M & L for 100mm thick PCC Type B-2 (1:2:4) Using 40 mm graded stone Agg as in flooring of Heavy veh parking of Hard standing all as specified and directed. |
| 244 | M&L for 80mm thick coloured machine pressed precast concrete interlocking paver block glossy finished any size and shape conforming to IS 15658-2006 , M-40Grade with grey cement and pigment over sand filling complete all as directed.( Cost of Sand will be measured and paid separately) |
| 245 | Excavation in post holes (or similar holes) each n.exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed withearth around, in layers n.exc 25 cm, watering and removing surplus soil to a distence n.exc 50 m and making good surface. |
| 246 | M&L PCC 1:3:6 Type type C2 (1:3:6) (40 mm graded stone aggregate) as inCement concrete in foundations,filling and mass concrete all as specified and directed. |
| 247 | M&L precast cement concrete block masonry with PCC solid blocks in 1:3:6 type C1 using 20mm graded stone aggregates, exc. 10cm in width and set in CM 1:6 complete all as specified and directed. |
| 248 | Demolition of brick work or stone / boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, in any description including cleaning and stacking serviceable brick for re use and balance removing rubbish from the site complete all as specified and as directed by Engineer-in-charge. |
| 249 | Plain cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling. |
| 250 | M & L for RCC- M - 30 Design Mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed pilesand mass concrete all as specified and directed |
| 251 | M & L for RCC- M -30 Design Mix as in columns, pillars, piers,posts and struts as specified and directed |
| 252 | M & L foe Use and waste of form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or tobatterfor Fair finished surfaces. |
| 253 | M & L foe Use and waste of form work to sides of pillars, posts, struts, piers, columns and stanchions |
| 254 | TMT bars 10 mm dia and over cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia |
| 255 | TMT bars 6 mm to 8mm dia and over cut to length bent to shape required and binding with mild steel wire annealed not less than 0.9 mm dia |
| 256 | Ditto, but 5mm dia and over up to and including 10mm dia as in stirrups, spacers, binders and the like |
| 257 | M&L Rendering 10mm thick on concrete surfaces in CM (1:6) finished even & smooth without using extra cement. |
| 258 | M& L for Finishing walls with Acrylic smooth exterior paint of required shade : New work (Two ormore coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) etc complete all as specified and as directed by Engineer-in-Charge.(Make Apex Ultima) |
| 259 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hangingdoor fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete of Fe-410-W (grade E-250) Quality B |
| 260 | M & L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 261 | s & F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161 1979 grade St.-240 |
| 262 | M & L For prepatring to existing steel/ Iron surfaces of any description exc 10cm Width or Girth and applying two coats of synthatic enamel paint over one coat of Redoxide primer complete all specifiedcand directed. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
