|
| 1 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removing to low lying area within station where directed complete all as specified. |
| 2 | Water proofing treatment to sunken slab and adjoining vertical surfaces as specified under :-(a) Cleaning of sunken portion and roughening to receive treatment.(b) M&L rendering 10 mm thick in cement plaster (1:3) using coarse sand mixed with integral water proofing compound trowel even and smooth with steel trowel on sunken surfaces(Note : WPC shall be measured and paid separately)(c) Applying first coat of chemical pidifin 2K(Dr Fixit) on cleared RCC surfaces @ 0.86 Kg/Sqm (Minimum) as recommended by manufacturer.(d) Provide a layer glass fibre mesh of size 2.25mm x2.25mm (45 GSM) over first coat of chemical Pidifin 2K as per manufacturers recommendation.(e) Applying second coat of chemical Pidifin 2K (Dr Fixit) / eqivalent @ 0.86 Kg/Sqm (minimum) layer glass fibre mesh of size 2.25mm x 2.25mm (45 GSM) as recommended by manufacturers.Note: The plan area of floor shall be considered for payment. |
| 3 | M&L for broken brick bats 40 to 80mm as in filling of sunken floors etc. complete all as specified |
| 4 | M&L for 25mm thick PCC 1:2:4 type B-0 (12.5mm graded aggregate) with WPC under floor over sunken complete all as specified and directed |
| 5 | M&L for 50mm thick PCC (1:3:6) type C-2 (using 40mm graded aggregate) as in plinth protection and floors including making grooves complete all as specified. |
| 6 | Demolition of RCC of any description such chajja, shelves etc and in any position not otherwise specially provided for complete all as specified and directed by Engineer in Charge and removing waste material to low lying area within station where directed, complete all as specified. |
| 7 | M&L for reinforced cement concrete 1:1.5:3 type B-1 (using 20 mm graded aggregate) as in Slab supported on walls, beams and column in floors, roofs, landings, balconies, deck slabs and in shelves and etc. and setting in mortar complete with joints to match all as specified |
| 8 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified |
| 9 | Use and waste of form work thorough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick and in beams/ columns etc. complete all as specified |
| 10 | Taking up or down GI/CPVC/any other tubing 15mm bore pipe incl removing to MES store complete all as specified. |
| 11 | Taking up or down GI/CPVC/any other tubing 20mm bore pipe incl removing to MES store complete all as specified. |
| 12 | Supplying and laying of 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other Brass fittings required except given in item number 16,17,18 & 19 on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified. bore of pipe 20mm complete all as specified and directed by Engr-in-Charge. |
| 13 | Supplying and laying of 25mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings and all other Brass fittings required except given in item number 16,17,18 & 19 on walls/ceiling or laying in floors complete including cutting chases in wall, floors etc and their making good in case of concealed pipe work all as specified. bore of pipe 20mm complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F GI tubing 15 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, including cutting chases in wall, floors etc and their making good in case of concealed pipe work complete all as specified. |
| 15 | S&F GI tubing 20 mm bore medium grade galvanise with all fitting and fixed to walls & ceilings or laid in floors, including cutting chases in wall, floors etc and their making good in case of concealed pipe work complete all as specified. |
| 16 | S&F of 20 mm CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified. |
| 17 | S&F of 20 mm CPVC Brass Elbow fittings complete all as specified |
| 18 | S&F of 20 mm CPVC Brass T fittings complete all as specified |
| 19 | S&F of 20 mm CPVC Brass Union fittings complete all as specified |
| 20 | M&L for non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed with adhesive with same make of tiles and pointed with epoxy grouting to match the coloured tiles over 15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified and directed by Engr-in-Charge.Note : (i) Adhesive measured and paid separately.(ii) Epoxy grouting rate including respective items. |
| 21 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, cut to reqd size and shape as in skirtings etc. set and jointed adhesive with same make of tiles and pointed with epoxy grouting match coloured over and incl 10mm thick rendering in CM 1:4 complete all as specified.Note : (i) Adhesive measured and paid separately.(ii) Epoxy grouting rate including respective items |
| 22 | M&L for Non skid ceramic tiles 7 to 8 mm thick (square/rectangular) (coloured tiles) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles15mm thick screed bed or bedding layer CM 1:4 for laying finishes, complete all as specified and directed by Engr-in-Charge.Note : (i) Adhesive measured and paid separately.(ii) Epoxy grouting rate including respective items |
| 23 | M&L for Non Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, cut to reqd size and shape as in skirtings etc. set and jointed with adhesive same make of tiles and pointed with epoxy grouting match to colour over 10mm thick rendering in CM 1:4 complete all as specified.Note : (i) Adhesive measured and paid separately.(ii) Epoxy grouting rate including respective items |
| 24 | M&L for Glazed ceramic coloured tiles in vertical surface 450x300x7mm or 600x300x7mm thick set and jointed with adhesive same make of tiles and pointed with epoxy grouting match to colour including 15 mm thick rendering in CM 1:4 on other than fair face of brick work complete all as specified.Note : (i) Adhesive measured and paid separately.(ii) Epoxy grouting rate including respective items |
| 25 | Dismantling floor, hearth or wall tiling including cement mortar bedding, terrazzo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing debris to low lying area within station where directed, complete all as specified. |
| 26 | Dismantling stone slabs of any description or thickness in floors, apron etc laid bedded and pointed in any mortar and removing debris to low lying area within station where directed, complete all as specified. |
| 27 | M&L for Granite (of any type) work 15 to 17 mm thick (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified |
| 28 | M&L for Machine cut kota stone slab flooring 18-25mm thick over and incl 15mm thick, 1:6 cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.Note : Single piece slab to be provided in steps and stairs |
| 29 | M&L for Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over 10mm cement screed 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified.Note : Single piece slab to be provided in steps and stairs. |
| 30 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified |
| 31 | Fixing only rotational moulded polythylene 500 ltr capacity water storage tank (Cylindrical vertical with closed top) white colour, hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair & dismantling of old water tank and removing to MES store complete all as specified. |
| 32 | Fixing only rotational moulded polythylene 1000 ltr capacity water storage tank (Cylindrical vertical with closed top) white colour, hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair & dismantling of old water tank and removing to MES store complete all as specified. |
| 33 | Dismantling and re-fixing only Rotational moulded polythylene 500 ltr capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified. |
| 34 | Dismantling and re-fixing only Rotational moulded polythylene 1000 ltr capacity water storage tank (Cylindrical vertical with closed top) hoisted and fixed in position including 20mm ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed in repair complete all as specified. |
| 35 | S&F in repairs 20mm gun metal globe or gate valve with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 36 | S&F in repair 15 mm bore ISI marked fancy type Chromium plated Angle stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 37 | S&F in repair 15 mm bore ISI marked fancy type chromium plated concealed stop valves , cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified. |
| 38 | S&F in repair Brass CP single lever central hole basin mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified |
| 39 | S&F in repair Brass CP telephonic wall / sink mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified |
| 40 | S&F in repair Health faucet (ABS body) mild steel chromium plated incl 1.25m long flexible CP tube and wall hook complete all as specified. |
| 41 | S&F in repair brass chromium plated shower rose 125mm incl 15mm bore CP shower arm complete all as specified. |
| 42 | S&F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified |
| 43 | S&F in repair 15 mm bore ISI marked fancy type chromium plated Pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified. |
| 44 | S&F in repair 15 mm bore ISI marked chromium plated fancy Bib taps, cast copper alloy with crutch, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified |
| 45 | S&F in repair vitreous china wash hand basin, white, flat back of size 550mm x 400mm including cantilever CI/angle iron brackets, CP brass waste coupling 32mm bore with rubber washer and PVC waste pipe 32mm bore complete all as specified and directed . |
| 46 | S&F in repair vitreous china counter wash basins, size 470x470mm white to be fixed with and incl 1200mm x 650mm granite & RCC slab including cutting for and pinning in ends of brackets or erecting stand, including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified. |
| 47 | S&F in repairs vitreous China one piece WC (Floor mounted or wall hung type) of approved make including soft close seat cover and CP spray jet complete all as specified. |
| 48 | S&F in repairs vitreous China squatting pan or Orissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl concrete bedding and connection to antisyphonage pipe etc including making good to floor complete all as specified. |
| 49 | S&F in repairs vitreous China EWC wash down water closet (Pedestal pattern) incl seat cover and PTMT spray jet incl connection to trap and to flushing pipe etc complete all as specified. |
| 50 | M&L in repair 100 mm dia of long body PVC 'P' or 'S' trap including jointing to waste pipe fixed in cement concrete 1:2:4 type B-1 complete all as specified. |
| 51 | S&F PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified. |
| 52 | Taking down rain water pipe and eaves gutters (any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) complete all as specified |
| 53 | Dismantling and disconnecting existing CI / PVC soil waste/vent pipe 100/75 mm bore fixed to wall, laid in trenches incl all fittings & accessories and removing debris to low lying area within station where directed and scrap to MES store complete all as specified. |
| 54 | S&F 110 mm bore of pipe PVC (SWR) pipes Grade B single socket in any length with rubber ring joint laid in floor/trench incl covered with PCC 1:2:4 or fixed to walls with and including GI clamps at distance of 2m c/c complete all as specified and directed. |
| 55 | All as per Srl Item No. 54 here-in-before but for 75mm bore pipe. |
| 56 | S&F 110 mm bore PVC (SWR) bends heavy grade with/without access door as per site requirement of any radius / shoe fixed to PVC pipes complete all as specified |
| 57 | S&F 75 mm bore of pipe PVC (SWR) bends heavy grade with/without access door as per site requirement of any radius / shoe fixed to PVC pipes complete all as specified |
| 58 | M&L for 75mm dia of long body PVC Floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair complete all as specified. |
| 59 | M&L for PVC (SWR) branch piece, single (single Y), 75 mm bore, (equal or unequal), with access door complete all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for PVC (SWR) branch piece, single (single Y), 100 mm bore, (equal or unequal), with access door complete all as specified and directed by Engineer-in-Charge. |
| 61 | M&L in repairs PVC (SWR) junction single, (Single T), 75 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) with/without access door as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 62 | M&L in repairs PVC (SWR) junction single, (Single T), 100 mm bore, (equal or unequal), ordinary or inverted (spigot or socket type) or with/without access door as per site requirement complete all as specified and directed by Engineer-in-Charge. |
| 63 | S&F in repairs PVC (SWR) vent cowl 100 mm complete all as specified and directed |
| 64 | S&F in repairs PVC (SWR) vent cowl 75 mm complete all as specified and directed |
| 65 | S&F Salt-glazed stoneware gully traps 150x 150 mm , square or round mouthed, type 'P’ complete all as specified |
| 66 | S&F 100 mm bore cast iron soil waste and vent pipes in any length with or without ears, with cement joints, laid in floor incl covered with PCC 1:2:4 or fixed to walls with and incl GI clamps at distance of 2m c/c complete all as specified. |
| 67 | All as per Srl Item No. 66 here-in-before but for 75mm bore pipe. |
| 68 | S&F 100 mm bore CI bend (any radius), diminishing piece or tapers with or without oval access door complete all as specified. |
| 69 | S&F 75 mm bore CI bend (any radius), diminishing piece or tapers with or without oval access door complete all as specified. |
| 70 | S&F 100 mm bore CI branch piece, Tee, Cross (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with or without oval access door complete all as specified and directed by Engineer-in-Charge. |
| 71 | S&F 75 mm bore CI branch piece, Tee, Cross (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches with or without oval access door complete all as specified and directed by Engineer-in-Charge. |
| 72 | S&F in repair 125 mm dia round / square grating of stainless steel with or without hole with white cement complete all as specified & directed by Engineer-in-Charge. |
| 73 | M&L for 10-15 mm thick ready mix mortar other than fare face of brick work or concrete surfaces and finishing the surface even & fair complete all as specified. |
| 74 | Supply only adhesive for fixing og tiles in floor and wall complete all as specified |
| 75 | M&L for rendering 5mm thick ready mix plaster on ceiling all as specified and directed. |
| 76 | M&L for rendering 5mm thick in cement mortar in 1:3 on ceiling all as specified and directed. |
| 77 | M&L in repair of deteriorated concrete surface like RSS slab, Fins, Projections, beams and columns etc by applying cement mortar 1:3, 15mm to 20mm thick in one or two layers over a coat of neat cement slurry @ 3kg/sqm over one coat of bonding agent on RCC deteriorated surface as per manufacturers specifications after chipping of loose concrete and cleaning the surface with air blower complete incl all necessary scaffolding upto 15m height all as specified and directed.Make : Dr Fixit URP , Fosroc Nitobond, Sikka Hibond.Note : Work to be executed in very small patches in different locations. Repaired surface to be finished with adjoining surface finish. |
| 78 | M&L for preparation of newly plastered or unplastered surfaces of wall and applying two coat of distemper oil emulsion white/tinted over a coat of wall care putty finished even and smooth surface by hand roller complete all as specified and directed by Engr-in-Charge. |
| 79 | M&L for preparation of surfaces and applying two coat of white wash on newly plastered surface of ceiling etc complete all as specified. |
| 80 | M&L for preparation of new surfaces and applying two coat of cement base paint complete all as specified.Note : Curing of surface will be carried out as per Para 15.15.3 of SSR Part-I |
| 81 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge |
| 82 | M&L for brick work with Fly ash bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc. complete all as specified and directed by Engineer-in-Charge. |
| 83 | M&L for hard core of gauge not exceeding 63mm using broken stone or boulders, deposited, spread and levelled in layers not exc 15cm thick, watered and rolled/rammed to a true surfaces complete all as specified and directed . |
| 84 | M&L for 75mm thick plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, paving etc complete all as specified and directed . |
| 85 | M&L in repair RCC fillet beams in ceiling with cement mortar 1:3 over applying a coat of bonding agent as per manufacturers specifications complete all as specified and directedMake: Dr Fixit URP, Fosroc Nitobond, Sikka Hibond |
| 86 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded aggregate) as in roof kerbs, under RWP, incl rounded or chamfered etc complete all as specified and directed by Engr-in-Charge.Note :- A Sum of Rs. 31,500.00 will be deducted on account of credit for dismantling/ demolished/ taking down material. Please refer detail on srl page No. 29 (Schedule of credit) of Tender Documents Please Enable Macros to View BoQ information |
