|
| 1 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum |
| 2 | Cement Concrete 1:5:10 (One Cement,Five Crushed Stone sand and Ten Hard broken stone jelly) using 40mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15cm thick well rammed, consolidated and including curing etc., complete complying with standard specification and as directed by the departmental officers - Mixing by mechanical means |
| 3 | Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, Sill slabs etc., which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3mm for boarding, laid with silver oak joists of size 10cm x 5cm & 7.5cm x 5cm as support runner, vertical stiffener, side support and Top Horizontal stiffener spaced at about 60 cm to 90 cm centre to centre or at suitable intervals etc., complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid) |
| 4 | Providing and laying in position, standardised concrete Mix M-20 Grade by insitu machine mix concrete adopting weighing batch method in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325kg / m3 and maximum water cement ratio of 0.55, including admixture (plasticier / super plasticer) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without inspiring strength and durability with about (5 Cu.m) 5156 kg. of 10-12mm machine crused stone jelly and with about (4.79Cum) 7670 kg. of curshed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc., and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra, slabs wherever necessary wthout claiming extra, |
| 5 | For Foundation and Basement |
| 6 | For Grade beam |
| 7 | Supplying, fabricating and placing inposition Mild Steel / Ribbed Tor Steel reinforcement grills of all variety like HYSD / CTD / TMT and all grade like Fe 500, Fe550D, Fe 500 D etc., for all RCC works as per design given including cost of steel reinforcement and G.I binding wire, wastage etc., complete complying with standard specification and as directed by the departmental officers. (Contractor has to make his own arrangements for the supply of steel reinforcement and binding wire) |
| 8 | Supplying and filling in foundation, basement, etc., with conveyed earth in layers of not more than 150mm thick layers well watered, rammed with surface vibrator and consolidated including conveyance charges etc., complete complying with standard specfication and as directed by the departmental officers. |
| 9 | Brick work in following Cement Mortor using best quality Fly ash Brick of size 230 x 110 x 75 mm with class designation of 7.5 conforming to IS 13757 - 1993 or IS 12894-2002 for foundation and basement including cost of Mortor plasticizer, curing, etc., complete complying with standard specfication and as directed by the departmental officers. Brickwork shall be done as per IS 2212-1991 adopting English Bond generally other type of bond shall be done as directed by the Executive Engineer in charge. |
| 10 | Plastering with Cement Mortor 1:5 (One Cement and Five Plastering sand), 12 mm thick in all floors including mortor plasticizer at 200 ml per 50kg of cement used, curing etc., complete complying with standard specification and as directed by the departmental officers. |
| 11 | Providing and laying , spreading and compacting graded stone aggregate to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well vibratory roller to achive the desired density complete as per clause 406 of MORTH specifications. |
| 12 | Cement Conrete 1:1-1/2:3 (One Cement, One and a half crushed stone sand Three Hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges centering and shuttering but including cost of reinforcement grill and fabricating charges centering and shuttering but including super Plasticieser, laying, vibrating with mechanical vibrators, finishing, curing, etc., and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc., shall be finished smooth with cement Mortor 1:3 (One cemnt and Three Sand) and kraft paper laid overit without standard specification and as directed by the departmental officers - manual mix |
| 13 | Providing and fixing Bitumen Pad for Expansion joint in between pavement slabs to 12mm thick and fixed as shown in the drawing including cost and conveyence of expansion joints including shalimar pad and joint sealent etc., complete as per standard specfication. |
| 14 | Supplying, fabricating, erecting, structural steel work for roofing welded or bolted type using MS channels, angles, plates nad round bars etc., conforming to IS specfication including primer coating and enemal painting as per Design given by the departmental officers etc., complete as per standard specification. |
| 15 | Supplying, fixing and roofing with colour galvaume sheet of 0.47mm thick with all necessary accessories such as J/V bolt and nuts of suitable length with suitable bitumen washers complete complying with standard specification and as directed by the departmental officers. |
| 16 | 2T capacity hand operated over head Travelling (HOT) crane suitable for a span upto 6 Mtrs, and travel length upto 10 Mtrs. With clear lift upto 6 Mtrs. Including gear type chain pulley block with GI chain and geared Travelling trolley complete with all accessories including grider Please Enable Macros to View BoQ information |
