Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | E.I :- Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. i) Group A Make:- Havells, Finolex, RR Kable, KEI, Plaza |
| 2 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:-Havells (REO) (Athena), Goldmedal(Air) (GIFa) ,Anchor ,Legrand, L&k,SSk |
| 3 | Supplying and fixing G.I. Modular box of suitable size with modular plate and cover in front on surface or in recess,including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:-Havells (REO) (Athena), Goldmedal(Air) (GIFa) ,Anchor ,Legrand (arteor), L&T(Entice) |
| 4 | Supply, Installation, Testing and Commissioning of following sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.85, Air delivery minimum 215 CMM, 300 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote/ BLDC electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. (i) Ceiling Fan 1200 mm sweep, Category-A. Make:-i)atomberg (Efficio), Havells (Efficia Neo), Orient (hector 500), Gold Medal (Maruti), Bajaj (efficia) |
| 5 | Providing and installation exhaust fan of following sizes in the existing opening, Double ball bearing type metal frame including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- atomberg , Havells, Orient, Gold Medal,Bajaj |
| 6 | (i) Exhaust Fan, Light duty, (Domestic) 300mm sweep. |
| 7 | (ii) Exhaust Fan, Heavy duty, 380 mm sweep (900/1400rpm) |
| 8 | S/E of LED Batten with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:-bajaj, havells, panasonic, Philips, Wipro, LT, Changi |
| 9 | Specification of LED fittings: |
| 10 | Wattage of LED fittings As per following parameter. |
| 11 | Total lumens of the fittings. as below |
| 12 | Diffuser Polycarbonate diffuser/PMMA |
| 13 | Operating voltage 140 V to 270 V, AC supply or better. |
| 14 | Input frequency 50 Hz + 1 Hz |
| 15 | Power factor Minimum 0.90 |
| 16 | Luminaire efficacy >100 lm/w |
| 17 | Color rendering index CRI shall be greater than 80 |
| 18 | Working/ operating temperature 00 to + 450c or better |
| 19 | Color temperature 60000K + 10% |
| 20 | Electronic Driver |
| 21 | Drive current (LED) As per OEM. |
| 22 | Operating voltage 140 V to 270 V, AC supply or better. |
| 23 | Type of driver Constant current output driver |
| 24 | THD Less than 10% |
| 25 | Surge Protection 2.5 KV minimum |
| 26 | Efficiency Driver >85% |
| 27 | Protection Shall have under voltage and over voltage protection. |
| 28 | Warranty of LED fittings including LED driver 5 years against manufacturing defect. |
| 29 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 30 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 31 | Life of LED 25000 burning hours at 70% lumen maintenance |
| 32 | S/E of LED Downlighter square type with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. (10 watt). as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:-bajaj, havells, panasonic, Philips, Wipro, LT, Changi |
| 33 | Specification of LED fittings: |
| 34 | Wattage of LED fittings As per following parameter. |
| 35 | Lumen output of the fitting as below |
| 36 | Diffuser Polycarbonate diffuser/PMMA |
| 37 | Operating voltage 140 V to 270 V, AC supply or better. |
| 38 | Input frequency 50 Hz + 1 Hz |
| 39 | Power factor Minimum 0.90 |
| 40 | Luminaire efficacy >100 lm/w |
| 41 | Color rendering index CRI shall be greater than 80 |
| 42 | Working/ operating temperature 00 to + 450c or better |
| 43 | Color temperature 60000K + 10% |
| 44 | Electronic Driver |
| 45 | Drive current (LED) As per OEM. |
| 46 | Operating voltage 140 V to 270 V, AC supply or better. |
| 47 | Type of driver Constant current output driver |
| 48 | THD Less than 10% |
| 49 | Surge Protection 2.5 KV minimum |
| 50 | Efficiency Driver >85% |
| 51 | Protection Shall have under voltage and over voltage protection. |
| 52 | Warranty of LED fittings including LED driver 5 years against manufacturing defect. |
| 53 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 54 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 55 | Life of LED 25000 burning hours at 70% lumen maintenance |
| 56 | S/E of LED Panel with PDC body and polycarbonate /Acrylic diffuser to be mounted in recess/surface The job includes carriage, erection, making connections testing and commissioning of the fittings. (2 * 2 feet 36 watt) as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- bajaj, havells, Goldmedal, panasonic, Philips, Wipro, Changi |
| 57 | Specification of LED fittings: |
| 58 | Wattage of LED fittings As per following parameter. |
| 59 | Total Lumens of the fitting as per watage |
| 60 | Diffuser Polycarbonate diffuser/PMMA |
| 61 | Operating voltage 140 V to 270 V, AC supply or better. |
| 62 | Input frequency 50 Hz + 1 Hz |
| 63 | Power factor Minimum 0.90 |
| 64 | Luminaire efficacy >100 lm/w |
| 65 | Color rendering index CRI shall be greater than 80 |
| 66 | Working/ operating temperature 00 to + 450c or better |
| 67 | Color temperature 60000K + 10% |
| 68 | Electronic Driver |
| 69 | Drive current (LED) As per OEM. |
| 70 | Operating voltage 140 V to 270 V, AC supply or better. |
| 71 | Type of driver Constant current output driver |
| 72 | THD Less than 10% |
| 73 | Surge Protection 2.5 KV minimum |
| 74 | Efficiency Driver >85% |
| 75 | Protection Shall have under voltage and over voltage protection. |
| 76 | Warranty of LED fittings including LED driver 5 years against manufacturing defect. |
| 77 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 78 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 79 | Life of LED 25000 burning hours at 70% lumen maintenance |
| 80 | S/E of LED bulk head IP 66 rated with aluminium body/PDC housing The fitting should be installed on existing surface The job includes carriage, erection, making connections testing and commissioning of the fittings. as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- bajaj, havells, Goldmedal, panasonic, Philips, Wipro, Changi |
| 81 | Specification of LED fittings: |
| 82 | Wattage of LED fittings As per following parameter. |
| 83 | Lumen output of the fitting as below |
| 84 | Diffuser Polycarbonate diffuser/PMMA |
| 85 | Operating voltage 140 V to 270 V, AC supply or better. |
| 86 | Input frequency 50 Hz + 1 Hz |
| 87 | Power factor Minimum 0.90 |
| 88 | Luminaire efficacy >100 lm/w |
| 89 | Color rendering index CRI shall be greater than 80 |
| 90 | Working/ operating temperature 00 to + 450c or better |
| 91 | Color temperature 60000K + 10% |
| 92 | Electronic Driver |
| 93 | Drive current (LED) As per OEM. |
| 94 | Operating voltage 140 V to 270 V, AC supply or better. |
| 95 | Type of driver Constant current output driver |
| 96 | THD Less than 10% |
| 97 | Surge Protection 2.5 KV minimum |
| 98 | Efficiency Driver >85% |
| 99 | Protection Shall have under voltage and over voltage protection. |
| 100 | Warranty of LED fittings including LED driver 5 years against manufacturing defect. |
| 101 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 102 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 103 | Life of LED 25000 burning hours at 70% lumen maintenance |
| 104 | S/E of LED Downlighter round type with polycarboante body and diffuser The fitting should be installed on existing surface/recess The job includes carriage, erection, making connections testing and commissioning of the fittings. (5 watt) as required complete in all respects and to the best satisfaction of Engineer-in-charge. Make:- bajaj, havells, Goldmedal, panasonic, Philips, Wipro, Changi |
| 105 | Specification of LED fittings: |
| 106 | Wattage of LED fittings As per following parameter. |
| 107 | Lumen output of the fitting as below |
| 108 | Diffuser Polycarbonate diffuser. |
| 109 | Operating voltage 140 V to 270 V, AC supply or better. |
| 110 | Input frequency 50 Hz + 1 Hz |
| 111 | Power factor Minimum 0.90 |
| 112 | Luminaire efficacy >85 lm/w |
| 113 | Color rendering index CRI shall be greater than 80 |
| 114 | Working/ operating temperature 00 to + 450c or better |
| 115 | Color temperature 60000K + 10% |
| 116 | Electronic Driver |
| 117 | Drive current (LED) As per OEM. |
| 118 | Operating voltage 140 V to 270 V, AC supply or better. |
| 119 | Type of driver Constant current output driver |
| 120 | THD Less than 10% |
| 121 | Surge Protection 2.5 KV minimum |
| 122 | Efficiency Driver >85% |
| 123 | Protection Shall have under voltage and over voltage protection. |
| 124 | Warranty of LED fittings including LED driver 5 years against manufacturing defect. |
| 125 | Fixture Should comply with LM 79 test from UL/NABL lab. |
| 126 | LED Type/ Make/ Model Power CREE/ OSRAM/ NICHIA/ Philips LUMILED with life more than 25,000 burning hours @70% lumen maintenance complying with LM 80 test report from the manufacturer. |
| 127 | Life of LED 25000 burning hours at 70% lumen maintenance |
| 128 | Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes with 8 bar pressure rating Five star BEE rating and safety valve installation by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. (i) 50 Liter capacity water heater (Cat-A) Make:- havells, racold, bajaj, Goldmedal, jaguar |
| 129 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. i) 40 Amps. Make:- Havells, ABB, Legrand, L&T, schneider, C&S |
| 130 | (i) Supply Instasllation Testing & Commissioning of Design Varified Assembly as per IEC 61439 1-2 with necessary arrangement of incorporating BBT. The panel should be as per the IEC61439 - 1,2 design verified totally Type-tested panels.The Panels should be cubical type indoor mounting with IP rating of IP 42, fully compartmentalized with hinged, lockable, detachable front & back openable, dust and vermin proof, mounting sheet steel clad switchboard fabricated out of 2 mm thick CRCA Powder-coated sheet steel suitable for use at 415 volts 3-phase 4-wire, 50 cycle system and to withstand a symmetrical fault level of 50 KA at 415 volts. Panels shall be fabricated in easily transportable sections,lenth, height, depth etc. to match with site condition. To ensure installation consistency during switchboard life cycle, installation system, switchgears, components and metering devices,MCBs and LEDsmust be supplied by the same Manufacturer (OEM).The Copper busbars rating shall be as per tested design of OEM, completing to IEC 61439. The busbars shall be of rectangular cross sections suitable for full load current. The ratings and configuration of bus bars shall be as per type tested design of OEM. The bus bars shall be colour coded using identifying colour ringsat regular interval. Red,Yellow & Blue colour shall be used for phases & Black for each shipping section of panels. The earth Bus bar shall be identified with Green rings at regular intervals. The panel shall be tested for impact resistance of IK 10. The Switchboard shall be tested to withstand vibration caused by an earthquake in accordance wiyh ICC ES AC-156, 3.2g Compliance or zone 5 in accordance with IS1893. The Panels shall be tested for internal arc compliance of minimum 70 KA for 0.5 sec as per IEC 61641 without double door. Type test certificate should be produced for the same. All the Drawings shall be checked (Signed & Stamped) by the Engineer -in-charge. |
| 131 | (ii) Incomer: 630A FP 50KA Microprocessor based LSING Protection MCCB ICS=ICU=100% complete with Extended Rotary Handle and OEM Make Spreader links =1no |
| 132 | (iii) ON/OFF/Trip (Red,Yellow,Amber) LED Indication lamps with MCB = 1no |
| 133 | (iv) Multifunction Meter Features Accuracy Class 1.0,0.5, Input Voltage measurement range 50-520 VAC,Aux supply 80-300 VAC/DC,CT secondary site selectable 1A/5A, Flush mounting 96x96 mm,CT/PT site programmable.Measurement : V,A,F,PF,KW,KVA, Old energy, On and Run hours,site selectable KWAh,True PF of Displacement PF site selectable = 1no |
| 134 | (v) 630 A Automatic Transfer switch 415V,AC,23A,4P ( Control Voltage 240 Vac) with Padlocking in OFF position, Option for selrction between manual and auto mode having complete arrangement with necessary wiring harness & Automatic Transfer Controllers (ATC) for Motorised Changeover & illuminated push Buttons =1no |
| 135 | (vi) 160 AFP 36 KA ICS=ICS=100% FP MCCB with Adjustsble overload settings: 0.67-1.0xIn & Adjustable short-circuit settings:6-12xIn = 4nos |
| 136 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. .Make:- Havells, ABB, Legrand, L&K, schneider, C&S |
| 137 | 40 A DP |
| 138 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \\"C\\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. i) Single pole. Cat-A..Make:- Havells, ABB, Legrand, L&K, schneider, C&S |
| 139 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator). as required complete in all respect and to the best satisfaction of Engineer-in-charge. .Make:- Havells, ABB, Legrand, L&K, schneider, C&S |
| 140 | (i) Double door-6 way |
| 141 | (ii) Double door-8 way |
| 142 | (iii) Double door-16 way |
| 143 | Wiring for circuit / sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface//recess PVC conduit along with 1 No.HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make:- Havells, Finolex, RR Kable, KEI, Plaza |
| 144 | (i) 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 145 | (ii) 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 146 | (iiii) 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 147 | (iv) 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 148 | Wiring for light/ power plug with 4X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 2 Nos. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make:- Havells, Finolex, RR Kable, KEI, , Plaza |
| 149 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required complete in all respect and to the best satisfaction of Engineer-in-charge. i) 3x1.5 Sq. mm. Make:- Havells, Finolex, RR Kable, KEI, , Plaza |
| 150 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required complete in all respect and to the best satisfaction of Engineer-in-charge. (i)Armoured cable 25 sq. mm (3.5 core) Make:- Universal Cables, KEI, Havells, Grandley |
| 151 | Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required complete in all respect and to the best satisfaction of Engineer-in-charge. (i) Armoured cable 240 sq. mm (3.5 core) Make:- Universal Cables, KEI, Havells, Grandley |
| 152 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 153 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 meter below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 154 | Supplying and fixing following rating, followings poles 10ka 240/415v 'C' curves miniature circuit braker suitable for inductive load of following poles in the exsisting MCB DB complete with connections, testing and commissioning etc. as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 155 | 40/63 A FP |
| 156 | SITC of TP&N vertical loading MCCB Incomer load line Distribution Board with Bus-Bar neutral link, Blanking plate (make Havells having cat no-DHDLVDRWAOFO12= 1 No, DP-63 Amps= 12 Nos, make Havells having cat no-DHMGIDPX063, including 160 Amps MCCB-63 Amps=1No,make Havells having cat no-IHD2HVBF0160) as required complete in all respects and to the best satisfaction of Engineer-in-charge. |
| 157 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 158 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor as required complete in all respect and to the best satisfaction of Engineer-in-charge. (For horizontal run) |
| 159 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor as required complete in all respect and to the best satisfaction of Engineer-in-charge. (For vertical run) |
| 160 | Fire Fighting :- Providing, laying, jointing and testing in following sizes of MS Class 'C' (heavy class) pipes Conforming to IS: 1239/3589 with accessories like fittings including tees, elbows, reducers, flanges gaskets, G.I. nus, blots complete with all accessories as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. TATA, JINDAL HISSAR SAIL. |
| 161 | 25 mm |
| 162 | 80 mm |
| 163 | 100 mm |
| 164 | 150 mm |
| 165 | Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr long and 20 mm nominal internal dia heavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax,Atasee, Ceasefire Newage. |
| 166 | Supply, installation, testing & commissioning of : Gun metal ISI marked odlique pattern hydrant landing valve with 80 mm dia flanged inlet and 63 mm dia instantaneous type female outlet complete with gunmetal cap and G.I. chain, twist release type plug and all accessories as per IS: 5290-1983 (Type 'A') as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax,Atasee,Ceasfire Newage. |
| 167 | Providing, fixing of 63 mm dia, 15 mtr long non-percolating flexible hose (RRL- type A) as per IS : 636, Type A with Gunmetal male & female instantaneous type coupling (IS 903). as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax, Atasee,Ceasfire Newage. |
| 168 | Providing & fixing 63 mm dia Gun metal Braneh pipe with Gun metal with 20 mm (nominal internal dia) Size Gun metal Nozzle with standard inlet instandenous lack type 63 mm dia Coupling Branch Pipe & Nozzle shalll Confirm I.S 903. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax,Atasee,Ceasfire Newage . |
| 169 | Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") out door type, made out of sheet having glazed door with 6mm thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax, Atasee, Ceasfire Newage. |
| 170 | Providing Gunmetal Collecting head with 63 mm dia instantaneous type inlet +150 mm dia flanged outlet with built incheck valve for fire brigade connection to UG Tank +wet riser I.S 904 specification test for 20kg/mm2 including necessary support as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax, Atasee, Ceasefire Newage . |
| 171 | FourWay |
| 172 | Providing Cast iron /steel Sulice Valve Confirming to type P.N 1.6 of I.S 13095-1991 Complete with Flanges bolt ,nuts ,gasket etc. As per table 'E' specification complete in all respect hydraulically test to 20 K./sqcm. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Zoloto, Sant, Leadar. |
| 173 | 80 mm Dia |
| 174 | 100 mm Dia |
| 175 | 150 mm Dia |
| 176 | Providing and fixing Cast Cast Iron/steel double flanged Dual Plate type with gunmetal seat non-return valve confirming to class - I of IS including nuts, bolts, 1.5 mm thick compressed asbestos gasket as per table \\"E\\" and specifications as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Zoloto,Sant,Leadar. |
| 177 | 80 mm dia |
| 178 | 100 mm Dia |
| 179 | 150 mm Dia |
| 180 | supply, Installing, testing and commissioning of 100mm dial type pressure gauge gate valve with all accessories as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. H.Guru, SystemSensor, Fbig. |
| 181 | supply, Installing, testing and commissioning of 25mm dia gate valve with all accessories as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Zoloto, Sant, Leadar. |
| 182 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 183 | Providing & fixing of IS marked (IS:15683) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK) as required complete in all respect and to the best satisfaction of Engineer-in-charge. i) 4.5kg Make .Minimax,Atasee, Ceasefire safex Padamini. |
| 184 | Providing and fixing Water CO2 9 .Litrs type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK) as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make. Minimax, Atasee,Ceasefire, safex Padamini. |
| 185 | Providing & Fixing 4 Kg. ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make Minimax,Atasee, Ceasefire, safex Padamini. |
| 186 | Supply ,Installation,Testing and Commissioning of electric driven Terrace pump suitable automatic opration and consisting of following complete in all respect as required inculding entire carriage with all leads and lift (terrace pump) Horizantal type muiltstage ,centrifugal split casing pump of cast ironbody and bronze impeller with stainless steel shaft mechanical confirming to IS 1520 12.5 HP squirel cage induction motor ,900 LPM ,35 mtr head TEFC type suitable for opreation on 415 volt ,3phase ,50Hz AcC supply with IP55 class of Production for encloser horizonal foot mounting type with Class Finsulation confirming to IS -325 comman base plate coupling guard,foundation bolt etc. as required complete in all respect and to the best satisfaction of Engineer-in-charge. .Make KIRLOSKAR /ABB/ SIEMENS |
| 187 | SITC of Cubical type panel fabricated from 2mm thick CRCA sheet wall mounted type made 18SWG IP 54 compartmentalised with hinged lockable doors,dust and vermen proof , powder coated of approved shade after 7 tank treatment process ,cable alley,inter coneection.Incomer 1 no.MCCB 63Amp 4 Pole 15KV withvoltmeter, Ampere meter inbuilt , outgoing 1 no.63 Amp .15 Ka 4 pole 12.5HP DOL Starter and auto/Manual switch with R/Y/B three phase indication pump running stauts indication push buttion start and stop etc. and internal wiring ,earth terminal nimbering ,suitable4 wire 415 volt ,50HZ 12.5 HP Dol Starter control wire FRLSH copper contuctor etc.including all petty material ,accessories required to complete the job in all respect including entire carriiage with all leads and lifts including entire carriage with all leads and lefts. as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 188 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size. as required complete in all respect and to the best satisfaction of Engineer-in-charge. (i) Armoured cable 25 sq. mm ( 3.5 core) Make KEI,Finolex, Polycab. |
| 189 | Supplying and fixing of water storage tank three layers with aceccories including 80mm tank connection 20000 liter. as required complete in all respect and to the best satisfaction of Engineer-in-charge.Make:- Sintex, Plasto, vectus. |
| 190 | Providing and fixing of angle 40x40x5mm size for water tank base stand. as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 191 | Fire Alarm:- Supply, Installation, Testing and Commissioning of Microprocessor based Intelligent Addressable Main Fire Alarm Control Panel with 2 Loops modules and each loop capable of supporting not less than 250 devices (detectors & modules should be in any combination) ; Loop length up to 1.5 km, 8\\" Color LCD touch screen display with bright colors to indicate alarms and events, 4 Nos of Integrated Ethernet Ports & 2 Nos of RS 485 for networking, 200 Nos of Soft programmable keys with status indicators for individual triggering of NAC Ouputs, evacuation speaker zones, AHU Modules, Damper switch, Smoke extraction Fans, Lifts.. etc. The Panel shall support 10000 history logs in the non volatile memory (EPROM), power supply unit (230 ± 5% V, 50 hz), 24 hrs back-up with 24 volt sealed maintenance free batteries with automatic charger.The panel should also have IP30 or better protection. The panel shall have seamless integration with EVAC certified Public Address System and shall be complete with all accessories, UL-FM/EN54-VDS Listed Certification. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Honeywell (Notifire) / Semines, Bosch, Edward. |
| 192 | Supply, Installation, Testing and Commissioning of Active and networkable repeater panel with 4x20 character LCD display complete system function keys for programming and control like system reset, alarm acknowledgement, alarm silence, trouble acknowledgement etc. Shall be UL-FM/EN54-VDS Listed Certification. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward |
| 193 | Supply, Installation, Testing and Commissioning of addressable Heat detector with fixed and rate of raise feature including mounting base with LED… etc. complete as required. Each Detector should have 2 inbuilt Isolators as per NFPA 72 style 7 wiring requirements (one for incoming and one for outgoing line) for maintaining operational availability of all elements in the loop in the event of a short circuit and to meet style 7 requirements. High resistance to electromagnetic effects in accordance with EFSG agreement EFSG/F/97/005 .Detector should monitor Electromagnetic interference and report to the panel - current and average values. Detector should have IP40 or better protection rating. EMC safety for detector shall be 50 V/m. Shall be UL-FM/EN54-VDS Listed Certification.. (Detectors without Inbuilt Isolators may be considered with an additional Isolator Module per detector) as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 194 | Supply, Installation, Testing and Commissioning of addessable Single ACTION manual pull station & necessary fixing arrangements with key complete as required. MCP should have IP40 or better protection rating Shall be UL-FM/EN54-VDS Listed Certification. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 195 | SITC of Loop Powered Sounder cum Strobe as per NFPA 72 style 7 wiring requirements & with 32 different tone variants selection options & adjustable sound pressure by 5 levels, the sound pressure 92.1 dB(A), with flasher having Synchronized flash rate of 1 Hz and Light intensity > 2 cd, should have IP40 or better protection rating be programmed from the panel. Shall be UL-FM/EN54-VDS Listed Certification. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 196 | Supply, Installation, Testing and Commissioning of Addressable Phone Control Module with 1 input, which shall monitor normally open or normally closed contacts.The module shall have an LED to indicate module status.It Shall be UL-FM/EN54-VDS Listed Certification. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 197 | Supply, Installation, Testing and Commissioning of Addressable Control Relay Module with inbuilt isolators as per NFPA 72 style 7 wiring requirements .Relay Control module shall be used for emergency control functions including shutting down Fire dampers in AHU's, tripping of AHU's, Fresh air fans, Ventilation fans, tripping of Access control doorsetc, Shall be UL-FM/EN54-VDS Listed Certification. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward |
| 198 | Supply, Installation, Testing and Commissioning of Glow Type EXIT Sign Board photo luminescent of size 300 mm x 250 mm x 1.5 mm rigid sheet signage containing Zink Sulphate as bare chemical class – 1 material PSPA fixed on 3 mm acrylic sheet on both side showing marking (running man, Arrow and Exit) and hanged with the ceiling with chain and fastener including cost of labour & material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of work. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make PES/Giolite/OMEX |
| 199 | Supply, Installation, Testing and Commissioning of 3/1.5 W Horn type loud speakers with following features:- Built-in 100 / 70 V LMT compliance with IEC60268 - Part 5, Power tapping 15 / 7.5 / 3.75 W, Sound pressure level at 3/1.5 W / 1 W (1 kHz, 1 m) 115 / 103 dB (SPL)complete with necessary mounting hardware & accesories. Certified to UL/ EN standards as required complete in all respects. |
| 200 | Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 201 | Supply, Installation, Testing and comissioning of Cabinet Speaker Max Power -12W ,Rated power (PHC) - 9W(6-3-1.5), Sound pressure level at rate power /1 w ,(at1kHz,1m) (at 1 kHz, 1 m) - 96dB/ 90dB,Effective frequency range (-10 dB) - 200-15000 Hz,Opening angle (at 1 kHz/4 kHz, - 6 dB),In degrees - 150/70,Rated voltage - 100 V,Rated impedance - 1667 . Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 202 | Supplyng installation testing and commissioning of fire fighter phone jack complete as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 203 | Supply, Installation, Testing and comissioning of controller unit 6-zone system pre-amplifier 240 amplifier Inbuilt Bluetooth and USB pen drive. Two input channels for call stations , Universal input for microphone/line, with speech optimized tone control , Three inputs for BGM selection and music optimized tone control , Front panel zone selection for BGM and call station zone selection for calls, S/N (flat at max volume) >63 dB (mic); >70 dB (line), S/N (flat at min volme/muted) >75 dB, CMRR >40 dB (50 Hz – 20 kHz),Line input 3 x, Master output 1 x, Frequency response 50 Hz to 20 kHz (+1 / -3 dB) complete. as required complete in all respect and to the best satisfaction of Engineer-in-charge. . Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 204 | Supply, Installation, Testing and comissioning of Stylish 6-zone call station, Six zone selection keys, allcall key and momentary PTT-key for calls Selectable gain, speech filter and limiter for improved intelligibility LED indications for zone selection, fault and emergency state Voltage range 18 – 24V Nominal sensitivity 85 dB SPL (gain preset 0dB) Gain preset +6 / 0 / -15 dB Equivalent input noise level 25 dBSPLA Frequency response 100Hz – 16kHz complete. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 205 | Supply, Installation,testing & Commissioning of digital autio amplifire 75 watt,25 V rms opreating 240V AC supply complete as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Schrack Honeywell (Notifire) Semines, Bosch, Edward. |
| 206 | Supply, Installation, Testing and comissioning of 2 core multistrand 1.5 sq mm annealed copper conductor Fire alarm & speaker cable in existing pipe/ channel I/C connection etc. as required complete in all respect and to the best satisfaction of Engineer-in-charge.Makes:- Finolex/ Polycab/ Havells/ KEI |
| 207 | Supply, Installation, Testing & commissioning of PVC Conduit Pipe, 25mm 1.6 mm thickness medium duty, ISI Mark with complete accessories as required complete in all respects and to the best satisafaction of Engineer-in-Charge. Makes:- Diplast/Polyplast |
| 208 | Supply, Installation, Testing and comissioning of 2KVA UPS Cum inverter, including batteries and 2 hour Backup as required complete in all respects and to the best satisafaction of Engineer-in-Charge.Makes:- APC /Luminous,Microtec libert, Eaton, Numeric |
| 209 | nSupply, Installation, Testing and comissioning of 19U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Makes:- Valrack /Netrack/ Comrack |
| 210 | Supply ,Installation ,Testing and Commissioning Fire fighter telephone hand set Complete as required, Make: Schrack Honeywell (Notifire) / Semines, Bosch, Edward. |
| 211 | Testing for system operation shall be conducted in presence of Engineer in charge & test certificate shall be furnished for the same. Testing shall be conducted using a test fire at normal floor level. The number of locations for such test shall be 1% of the total number of detectors in an installation subject to a minimum of two and maximum of five. The system operation for fault conditions shall be conducted by introducing faults such as open circuit, short circuit, removal of detector, open/short circuit in a sounder circuit etc. NOC/Approval from concremed Fire Officer is to be obtained as per H.P. Fire regulation & byelaws. |
| 212 | Supply & installation of 500 Lpd solar water heater ECT Type Solar SS/GI tank with ceramic coating.58*2100 mm Thermal evocated tubes.5feet ms stand for hot water tank,5.5 feet ms stand for cold water tank. 500 ltr.cold water water tank.3 kv electrical backup system etc. as required complete in all respect and to the best satisfaction of Engineer-in-charge.Make:- TATA, Recold,Superme solar Jain Solar |
| 213 | Supply & installation of 15 KW Solar Power Plant On-grid System: (i) solar panel 610w Topcon (TATA) = 25nos. (ii) Solar Inverter On-grid (TATA Appr.) =01no.(iii) GI Supporting Structure = as per required.(iv) ACDB/DCDB, Earthing Set, LA, As per MNRE,Guidlines.(v) 6 Sqmm Solar Wire =As Required.All Installation and Transportation charges as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make:- Tata,Havells, waaree energy Panasonic |
| 214 | S/E of Solar Post Top Light Decorative,pole mounting,antique finish fixture with suitable for 24 W having Battery Type and capacity 12.8V, 12 Ah. The fitting should be installed on existing poles top. The job includes carriage, erection, making connections testing and commissioning of the fittings. as required complete in all respect and to the best satisfaction of Engineer-in-charge. (i) Solar Post Top Light Make:- bajaj, havells, Goldmedal, panasonic, Philips, Wipro, Twinkle, Changi |
| 215 | Providing and fixing Steel Poles (4Mtr) are made of galvanised mild steel tube having 114mm dia bottom and 60/75mm dia at top with cast alum. Embelishments -Q3. The Poles are primer coated with polyurethane paint. Pole are suitable for single/ Double/ Tripple/ Four side post top/Drop down luminaires. The Poles has a service window at the Bottom comprising four way 25 AMP connector terminal and a MCB. Pole has a mild steel base plate having 4Nos. mounting holes as per drawing and can be mounted with 4 Nos. anchor bolts as required copmlete with all respect as per the satisfaction of the Engineer-in-charge Make:- K-lite Valmont,Twinkle |
| 216 | CCTV :- SITC of 1/ 2.8 inch or better, CMOS & Progressive Scan and 5MP Dome Camera. 1 ~ 1/32000 s or better, MVF 2.7 ~ 13.5 mm or better, H.265+/H.265, H.264, Color: 0.01 lux @ F2.0/1.6, B/W: 0 lux with IR, Signal-to-Noise Ratio (SNR) 52dB or Better,Defog,Day and Night functionality Automatic, Color, Mono, Internal Illuminator visibility of at least 60 meters, 5MP, 2MP (1920x1080) & 720P (1280x720) @ 25/30 FPS, Wide Dynamic Range Required, Configurable video (H.265+, H.265, H.264) Quad Stream, Perimeter, Crossing line/Tripwire, Motion detection, Tampering/Masking, Compatible Integration ONVIF profile S, G, T & M, SDK/API,SD Card:2TB or Better, SRTP/AES/TLS 256 or Better Encryption Support.The OEM of Camera should not be Banned/Blacklisted because of security concerns anywhere globally. Built in/External Mic Should be supported and provided. '-10°C ~ 60°C. IP67, IK10,NEMA 4X or higher with Built-in Surge Protection (Test reports required for IP67 & IK10). 12 V DC ±10%, PoE, Certifications UL, CE, FCC,OEM Cyber Security Certificate,STQC Compliant BIS-ER .The camera should be certified for web application penetration testing as per OWASP-WSTG V4.2 standard from any lab before the bid publishing date as per STQC directorate.OEM Should Have ISO 9001,14001,27001,45001. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make :Axis/Pelco/Norden/Bosch |
| 217 | SITC of 1/ 2.8 inch or better, CMOS & Progressive Scan and 5MP Bullet Camera. 1 ~ 1/32000 s or better, MVF 2.7 ~ 13.5 mm or better, H.265+/H.265, H.264, Color: 0.01 lux @ F2.0/1.6, B/W: 0 lux with IR, Signal-to-Noise Ratio (SNR) 52dB or Better,Defog,Day and Night functionality Automatic, Color, Mono, Internal Illuminator visibility of at least 100 meters, 5MP, 2MP (1920x1080) & 720P (1280x720) @ 25/30 FPS, Wide Dynamic Range Required, Configurable video (H.265+, H.265, H.264) Quad Stream, Perimeter, Crossing line/Tripwire, Motion detection, Tampering/Masking, Compatible Integration ONVIF profile S, G, T & M, SDK/API,SD Card:2TB or Better, SRTP/AES/TLS 256 or Better Encryption Support.The OEM of Camera should not be Banned/Blacklisted because of security concerns anywhere globally. Built in/External Mic Should be supported and provided. '-10°C ~ 60°C. IP67, IK10,NEMA 4X or higher with Built-in Surge Protection (Test reports required for IP67 & IK10). 12 V DC ±10%, PoE, Certifications UL, CE, FCC,OEM Cyber Security Certificate,STQC Compliant BIS-ER .The camera should be certified for web application penetration testing as per OWASP-WSTG V4.2 standard from any lab before the bid publishing date as per STQC directorate.OEM Should Have ISO 9001,14001,27001,45001. Make :Axis/ Pelco/ Norden/ Bosch |
| 218 | SITC of IP CCTV NVR 32 channel with 4HDDs(Raid1/Mirroring Support), H.264/H.265, 1 HDMI & 1 VGA Output, Network interfaces 1 RJ-45,10/100/1000 Mbps self Adaptive Ethernet Interfaces , 2 USB 2.0 Interface, resolution support 8MP/6MP/5Mp/4MP/3MP/ 1080p/ UXGA/ 720p/ VGA, Alarm Interface (4 In/ 1 Out), Audio Interface (1 In/ 1 Out), Security -User Authentication, 802.1x Authentication, AES Video Encryption, User Access Log, operating temprature - 10 to +55 degree, IP address filtering, Video Analytics :Loitering, Running, Abandoned object (Object Left), Missing object (Object Lost), Parking, Face Detection (Capture), People Counting, Crowd Detection(onboard or through VMS ,If through VMS , all Server and VMS licenses shall be quoted from Day-1) , ONVIF Profiles S & G, Certifications - UL , CE & FCC complete etc. as required.OEM Cyber/Information Security Certificate. OEM should have ISO 9001,14001 and 45001 as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make :Axis/Pelco/ Norden/ Bosch |
| 219 | SITC of Layer-2 switch 24 x 10/100/1000 Base-T ports and additional 4 nos. SFP ports. Switch should supported for load balancing and constructing scalable LANs. IPv6 routing (OSPFv3) is supported in hardware for maximum performance.Switch should have 370 watt power budget. Switch support Auto-voice VLAN, SNMP v1, v2c, v3, RFC 1643 Ethernet Interface MIB, RFC1493 Bridge MIB, Jumbo Frame Support (up to 9 KB), IEEE 802.1Q Tag VLAN, IEEE 802.1p (Class of Service), 128 Static VLANs , , DSCP - L3 QoS, Port -based ingress/egress rate limiting, Forwarding modes: Store-and-forward, Bandwidth:52 Gbps.IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3x full-duplex flow control, IEEE 802.1D Spanning Tree Protocol, IEEE 802.1S Multiple Spanning Tree Protocol, IEEE 802.1S Multiple Spanning Tree Protocol. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make:Cisco/Juniper/Extreme |
| 220 | SITC of Layer 2 Switch should have 8 Nos PoE 120 Watt. of 10/100/1000 Mbps Ethernet Ports and 2 Nos. of dual personality (SFP/GbE) portsThe switch should be flexible enough to be managed through cloud and standalone mode. The cloud management should be free of cost The Switch should have Non-blocking wire speed switch fabric, should have Min. 20 Gbps Back plane or more and should have Min. 15 Mpps or more, IPv6 Support, 16K MAC address, CE-LVD ,FCC, CE ,BSMI , RoHS Compliant,Operating temperature 0 DegC to 50 Deg C Should have Cluster Stacking to manage up to 20 switches by single IP addressThe OEM Brand should be having valid ISO 9001, ISO 14001, ISO 45001:2018 all these cerificates must be submitted in technical bid Make:Cisco/Juniper/Extreme. |
| 221 | SITC of CAT 6 UTP Cable. Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC NVP 69% required with certification report. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: (R&M,D-Link,Molex). |
| 222 | SITC of 3core 1.5sqmm power cable. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Havells, Polycab, Finolex |
| 223 | SITC of PVC pipe25mm dia ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work Make: BEC, AKG, Kalinga / Diplast |
| 224 | SITC of 55\\" LED Monitor, Full HD, HDMI Port, Component Video Inputs, 1 Digital Audio Out, as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Sony/ Panasonic/ Samsung |
| 225 | SITC of 3KVA UPS Overvoltage cut-off device (OVCD),Support for up to 42 AH external batterys , cabinets, Generator Compatible with Wide Input. Wide Input Voltage window (110 – 280Vac) for IndianEnvironmental Condition andfor Optimized BatteryPerformance. UPS would support SNMP Mnagaer and web browser On Line With 1 hour Backup as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make:- APC /Luminous,Microtec libert, Eaton, Numeric |
| 226 | SITC of 42 AH external batterys as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make Exide/Quanta/Rocket |
| 227 | SITC of 24-port 19\\" 1 U jack panel which Should Be made of sheet steel 1.5 mm, Should be 19\\" 1U straight Patch Panel, 24-port,Should have integral cable management Metal shelf,Should accept Shielded as well as Unshielded jacks, Should have rear cable management shelf metallic powder coated as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make (R&M,D-Link,Molex) |
| 228 | SITC of CAT6 UTP 24 AWG Patch Cord - 1 mtr with cross separator , Manufactured from stranded wires for longer flex-life , Minimum length of 1m, and maximum length of 5m onforming to the following standards like EN 50173, ISO/IEC 60603-7 & 11801/IEC 60332-1, UL VW-1 as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: (R&M,D-Link,Molex) |
| 229 | SITC of 9U rack for switch Mounting with Fan and power Strip, PDU, Hardware Mounting Kit Make: Netrack/Comrack/Valrack. |
| 230 | SITC of 17U Equipment Rack with provision for housing all control equipment with front & rear door, Blower for cooling and proper locking arrangements and as per the specifications, complete in all respect upto the entire satisfaction of Engineer - in - Charge of the work. Make: -Valrack /Netrack/ Comrack |
| 231 | Networking wifi :- SITC of 8 Port PoE Switch:- Switch should have total 10 Nos. Gigabit port including 8 Nos. of 10/100/1000 Mbps Ethernet PoE Ports and 2 Nos. of dual personality (SFP/GbE) ports.PoE should be 130 Watt. The switch should be flexible enough to be managed through cloud and standalone mode. The cloud management should be free of cost., The Switch should have Non-blocking wire speed switch fabric, should have Min. 20 Gbps Back plane or more and should have Min. 15 Mpps or more and . 16K Mac address or more, CE-LVD ,FCC, CE ,BSMI , RoHS Compliant, Operating temperature 0 DegC to 50 Deg C,IPv6 Support, Should have Cluster Stacking to manage up to 24 switches by single IP addressThe OEM Brand should be having valid ISO 9001, ISO 14001, ISO 45001:2018 all these cerificates must be submitted in technical bid. Make- Cisco, Juniper,HPE |
| 232 | SITC of Indoor WLAN Access Point –Supply and installation of 802.11be (WiFi 7) wireless access point with 4x4 MIMO.Should work on 2.4 Ghz, 5 GHz and 6Ghz wireless frequency simultaniously, WiFi 7 speeds up to 12.3Gbps or better.Should support maximal ratio Combining Should be operable at 20Mhz, 40Mhz, 80Mhz, 160MHz and 320Mhz channels, Should support data rates up to 688 mbps over 802. 11n and 8646 Mbps over 5Ghz and 11530 Mbps over 6Ghz Radio, Should support A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) packet aggregation. Should have cyclic delay diversity support, Should have maximum likehood demodulation support, Should have low density parity check support RF Specifications\\"Should be operable on the following frequency bands :5 GHz (IEEE 802.11 a/n/ac/ax/be)(FCC): 5.15 to 5.25 GHz; 5.470 to 5.850 GHz., 6 GHz (IEEE 802.11 ax) (FCC): 5.925 to 6.425 GHz; 6.425 to 6.525 GHz; 6.525 to 6.875 GHz; 6.875 to 7.125 GHz.AP should have the transmition power of 26 dBm or better. Should have antenna gain of atleast 1.4dBi on 2.4Ghz and 2.7dBi on 5Ghz and 3.17dBi on 6Ghz.Should support of connectivity for 256 devices per AP (128 device per Radio) maximum associationShould have Min. Rx sensitivity up to -99 dBm.LAN2x Ethernet port support multiGiga 2.5Gbps or better.Should support PoE power consumtion less than 22Watt.Should support the following standards - IEEE 802.3,IEEE 802.3u,IEEE 802.11ab, IEEE 802.3au, IEEE 802.3az,IEEE 802.3at |
| 233 | WLAN FeaturesShould support Mesh connectivity and when required with Cloud controllerShould support fast roaming Should support Mesh AP for multiple SSID and VLANWireless Security Should support WEP , WPA/WPA2-PSK WPA/WPA2-Enterprise ,WMM (Wi-Fi Certified) ,WLAN Access control list, also support WPA3Should support EAP-TLS, EAP-TTLS, EAP-PEAP, EAP-FAST, EAP-AKA and EAP-SIMShould support IEEE 802.1X ,RADIUS Authentication ,Microsoft AD Authentication , Web Authentication ,LDAP Authentication , MAC Filtering , Layer-2 Isolation , MAC Authentication.Should support atleast 16 of SSIDShould authenticate to embedded RADIUS Server of controller with multiple profileShould have WLAN access control list feature/BSSS MAC filteringNetwork Should have IPv6 support from day-1Should support VLAN and DHCP clientQoS(PG)Should support WMM and WMM Power save featuresShould support Diffserv MarkingManagement |
| 234 | Should be supplied with same make softwares which can detect all Aps in the network and managed from single console in standalone modeThe software supplied with AP should be able to perform the following tasks - IP configuration/renew , Device Location, password configuration, device reboot, firmware upgrade, Batch AP configuration and firmware upgrade, Batch profile backup, Wi-Fi AP Planning, wireless healthe management and coverage detection AP should support Managed and standalone modesShould also be manageble through CLI, WEB console and SNMP Should have multiple level for management adminAccess Point should support Standalone and Cloud Controller mode for single central worldwide management from the any corner of the world over the Internet conenction.For the local managemnet should support vendor specific utilities for local management.Access Point should support application secuity and Content security with Cloud based management Access Point should support NAT feature on cloud mode to provide the IP address to the connecetd clients. |
| 235 | Access Point should be equipped with Basic free pack of cloud management from day one without addidtional license, for additional cloud feature OEM should provide advanced pack of licenses.Access Point should support application secuity and Content security, App Visibility with Bandwidth Throttlewith Cloud based management Access Point should support NAT mode over Cloud, which is used to have the AP create a DHCP server/subnet with its own NAT for the SSID. This provides minimum hardware requirement for Wi-Fi.Cloud management for AP should have mobile application App Store/Google Play) also to manage from anywhere.Cloud portal for access point also support Captive portal to provide internet access by using specific user name and password.Others MTBF value should be atleast 690,000 hrs or betterAccess Point should have PoE support , also should have option to power up with USB Type-C Port for power redundancy. Mount plate and mounting screws should be included.Certifications FCC Part 15C, FCC Part 15E, ETSI EN 300 328, EN 301 893, LP0002.FCC Part 15B, EN 301 489-1, EN 301 489-17, EN55022, EN55024, EN61000-3-2/-3, BSMI CNS13438 EN 60950-1, IEC 60950-1, BSMI CNS14336-1Environmental Specifications Should support operating termperature upto 50°C Should be operable under humidity of 10% to 90% (Non-condensing) Make- Cisco,HPE , Juniper |
| 236 | SITC of Core i5 Desktop with 8GB RAM, 512 GB SSD, Windows 10, keyboard mouse, minimum Make:Dell/HP/Lenovo |
| 237 | SITC of CAT 6 UTP Cable. Transmission frequency of 250 MHz (Minimum),cable Should be 4 pair and Cable should be jacket FR PVC NVP 69% required with certification report. Make: (R&M,D-Link,Molex) |
| 238 | SITC of 3core 1.5sqmm power cable. as required complete in all respect and to the best satisfaction of Engineer-in-charge. Make: Havells, Polycab, Finolex. |
| 239 | SITC of PVC pipe25mm dia ISI marked ( Medium ) recessed in wall / ceiling etc. including the cost of PVC bends , inspection boxes , iron hooks and cement concrete etc. complete in all respect upto the entire satisfaction of Engineer-in-charge of work Make: BEC, AKG, Kalinga / Diplast |
| 240 | Supply, installation, testing and commissioning of 13 Passenger Machine room less lift . The rates include the cost of minor civil works and steel items required for installation of lifts complete in all respect to the entire satisfaction of engineer-in charge. |
| 241 | 13 Passenger 884 Kgs, 1 Mps (min.) lift having 4 stop and 4 opening all on same side, Machine room less, having approximate travel 12 meters as per detailed technical specifications given below.as required complete in all respect and to the best satisfaction of Engineer-in-charge. |
| 242 | Type & Capacity 13 Passenger 884Kgs. |
| 243 | Speed 1.00 Meter Per Second (Minimum) |
| 244 | Type of Drive VF Regenerative (Closed Loop) |
| 245 | Motor / Machine PM Gearless |
| 246 | Travel Approximate 12 Meters |
| 247 | Serving 4 stops, 4 openings, (All on same side ) |
| 248 | Hoist way Available 1800 mm wide x 2400 mm deep. |
| 249 | Car size 1800 mm wide x 2400 mm deep. |
| 250 | Car Enclosure S.S Scratch resistance finish Car,decorative false ceiling, LED lighting, blower/rotor fan. |
| 251 | Car & hoist way Door Central opening (CO) doors. |
| 252 | Car entrance & Hoist way entrance Center opening doors 900 mm wide 2000 mm high with provision of emergency key opening at all landings. |
| 253 | Door Operation Automatic D.C. Power/ A.C.V.3.F. Door operation with adjustable door opening & closing timing. |
| 254 | Control Simplex, full collective control with or without attendants. |
| 255 | Operation Full collective operation. |
| 256 | Power Supply 400/415Volts (3 Phase AC). |
| 257 | Over Head available 4200 mm |
| 258 | Flooring Granite Flooring. |
| 259 | PIT available 1350 mm Deep |
| 260 | Leveling Accuracy +/-5mm Independent of load in the car. |
| 261 | Indicator Digital Direction and position indicators in both car and at all landings. |
| 262 | Guide Rails Tongue & Groove Guide Rails |
| 263 | Maintenance Free Maintenance / Fortnightly Service for one year |
| 264 | Safety & Buffers. As per I.S.I. Provisions. |
| 265 | Fire Safety The Landing door shall be fire rated for 2 hours as per IS. |
| 266 | Signal/ Accessories Press & Speak intercom system among cars & reception.Luminous hall Braille buttons at all landing and inside the car. |
| 267 | Steel items. |
| 268 | Automatic Rescue Device to automatically bring the Elevators to a landing in case of power or controller failure provided with sealed maintenance free Batteries of suitable rating for 7 operations of ARD in a day with duration of 30 min. The batteries shall be of reputed make (Exide / Amaron / Panasonic). |
| 269 | Load weighing Device with over load by pass feature. |
| 270 | Voice announcement system with music in the car to announce the position of the elevator as the car stops at a floor served by the elevator. |
| 271 | Full height infra red Safety curtain. |
| 272 | Fireman Drive. |
| 273 | Stainless steel panels in false ceiling |
| 274 | LCD/LED/Digital display in car/ Braille button/ PWD friendly. |
| 275 | Car operating Panel with door open/close button. |
| 276 | LED Lighting |
| 277 | Alarm & Emergency light .(Concealed) with re-chargeable battery |
| 278 | Over load Device. |
| 279 | Fireman Switch. |
| 280 | Air fan at Ceiling for air ventilation (16”sweep). |
| 281 | Audio signal in case of emergency stop/ any interruption should be provided in the lift car. |
| 282 | Correction drive |
| 283 | Hall lantern and gong at all landings |
| 284 | Phase failure detection. |
| 285 | Voltage stabilizer for control system. |
| 286 | Additional car gate lock to prevent the car door to be opened hand rail on three side of car from inside the car in case the car is not at floor level. |
| 287 | Installation & Commissioning The job includes installations, testing, commissioning as required to complete the work in all respect including cost of all material , T &P, Carriage & Labour etc. |
| 288 | Civil Work The firm shall provide scaffolding, M.S. joint /Channels, Pit ladders and minor Civil works etc. as required at no extra payment. The complete lifts including testing, commissioning and safety provisions shall conform to various Indian standard and rules with up-to-date amendments as mentioned below”- |
| 289 | Standard & Rules. 1. 17900 |
| 290 | 2. Part 1 to 5 |
| 291 | General technical specifications As per CPWD specification and relevant IS code. |
| 292 | Make:-OEM fulfilling the eligibility criteria as specified in CPWD for lift work as per IS-17900 |
| 293 | Providing AMC for lift under item No.1&2. Under the AMC the supplier shall provide comprehensive Mtc. service of the lift including the spares and there shall be no hidden cost. Preventive Mtc. service of the equipment under AMC must be carried out once in fortnight. During the period of AMC service/repair calls are to be attended by the supplier within two hours from the time of such calls. The defective equipment should be repaired on the same day at purchaser’s location. In case of major defects requiring the defective card/item/ equipment to be taken to the supplier workshop. It should be returned within a week’s time duly repaired and immediate substitute card/item/equipment will be provided by the supplier for the smooth operation of the lifts. The to and fro transportation of the card/item/equipment will be the responsibility of the supplier. Delays in attending the calls and or repairing the defective equipment beyond time limit of one day will attract penalty @ Rs.500/- per day. The bidder will undertake the supplies of necessary Mtc. equipment and spare parts will be made available for all the equipment and the complete system for a period of 10 years on continuing basis with 1st year defect liabiliy period on free of cost and thereafter for four years on paid basis. The bidder shall quote the rates on per year basis. |
| 294 | For 1st Year |
| 295 | For 2nd year |
| 296 | For 3rd year |
| 297 | For 4th year |
| 298 | For 5th year |
| 299 | For 6th year |
| 300 | For 7th year |
| 301 | For 8th year |
| 302 | For 9th year |
| 303 | For 10th year Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
