|
| 1 | Earth work excavation in ordinary soil, exclusive of compensation of earth:- Earth work undressed with a combined lead upto 15 metres including breaking of clods. |
| 2 | CONCRETE Cement concrete 1:3:6 with stone ballast or shingle (i) mixing by manual means |
| 3 | Damp proof course 4cm thick of cement concrete 1:2:4 with 2 coats of bitumen 20/30 penetration at 1.65 Kg per sqm laid hot and sanded |
| 4 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 5 | BRICK WORK (i)) First class burnt brick laid in cement sand mortar 1:6 in foundation and plinth |
| 6 | First class burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level. |
| 7 | (i)) First class burnt brick work laid in cement sandmortar 1:6 in first storey upto 4 metres above plinth level. |
| 8 | PLASTERING & POINTING 20mm thick cement plaster 1:6 in two coats work |
| 9 | WHITE WASHING, DISTEMPERING, PAINTING & POLISHING Preparation of plastered surfaces for distempering including surface, applying filling with approved quality filler consisting of plaster of paris and chalk mitti including finishing the surface to the required finish complete |
| 10 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 11 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 12 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade |
| 13 | Finishing walls with acrylic smooth exterior paint of required shade with two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing Cement Paint applied @ 2.20 Kg/10 Sqm |
| 14 | STEEL AND IRON WORK Cold twisted deformed (Ribbed/ Tor steel) Bars (Fe 415 grade as per IS 1786-2008) , for R.C.C works, where not including in the complete rate of RCC including binding & bending and placing in position complete |
| 15 | Providing and fixing of interior blinds zebrawith all fittings.Rate as per Quotation Attached |
| 16 | Providing and fixing vitrified tiles 1200mmx600mm overexisting base using cement sand mortar 1:4 andadhesive wherever required complete in all respects. Rate as per Quotation Attached |
| 17 | FLOORING & DADOS Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 450 x 310 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 18 | Providing and laying vitrified floor tiles in different sizes in light colour shades made using Full Body Technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Full body vitrified tiles have pigment in entire body / thickness of tile which makes chips and scratches less noticeable and make na ideal choice for high traffic zones.) makes chips and scratches less noticeable and make na ideal choice for high traffic zones.)(a) Size 600x600 mm |
| 19 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. (a) Size 600x600 mm. |
| 20 | Dholpur stone tiles 25 mm thick in wall facing ( lining ) laid in any pattern as specified on 12.5 mm thick cement sand plaster 1:3 and jointed with neat cement slurry mixed with pigment to match the shade of stone including rubbing & polishing including labour for fixing cramps, pins & dowels etc. |
| 21 | Providing and laying Anti skid Ceramic floor tiles of size 300x300 mm x 10 mm thick of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on flooring skirting and dado in 12.5mm thick cement plaster 1:3 in base and jointed with @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., completewhite cement slurry in joints including corners angles and beading. |
| 22 | HOISTING, ROOFING AND WATER PROOFING Providing and Fixing ceiling at height upto 4 mtr consisting of 12.5mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings,specifications and tothe entire satisfaction of engineer-in- charge. |
| 23 | Providing and Fixing face work with wire cut bricks of size (9\\"x3\\"x 34\\") with cement sand mortar 1:3 with ½ thick deep joint complete a per requirement ofdepartment. Rate as per Quotation Attached |
| 24 | Providing and Fixing Toughene Glass 12mm thick with frame work and silicon solution including cutting of Sand/Dhaulpur stone with framing at dam site as per requirement of department. Rate as per Quotation Attached |
| 25 | Providing and fixing wooden panelling using 19mm board with anti-termite treatment, putty, primer and two coats of paint of required colour complete as per requirement of department. Rate as per QuotationAttached |
| 26 | Providing and fixing of 4\\" high Skirting in lobby with cement mortar 1:3 and adhesive, wherever required as per the directions of Engineer-in-charge. Rate as per Quotation Attached |
| 27 | Providing and fixing 10 mm to toughened glassBathroom Partition of size 3‘ x 7‘ includingdrilling of holes, providing ofclamps etc,complete in all respects as per therequirement of the department.Rate as per Quotation Attached |
| 28 | SANITARY INSTALLATIONS Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) ((a)) Size 600mmx450mm |
| 29 | ((c )) Size 1500mmx600mm or any other size |
| 30 | Providing & fixing in position Water Dispenser Top Loading (with refrigration capacity 15 ltr) of approved make (to the approval of Engineer-in-charge ) dispensing hot/cold/ambient water including cost of two no. 20 ltrs packaged drinking water bottles and carriage complete in all respect. |
| 31 | Providing and fixing in postion storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect. Vertical type (iii) ) 40 litre capacity water heater |
| 32 | Providing and fixing in position Chinaware extended wall mounted E. W.C. type suite (size 66 x 46 x 77.5 cm ) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) with or without 10 ltr. chinaware matching flushing cistern and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. (b)) Chinaware wall mounted E.W.C without cistern including seat cover complete in all respect. |
| 33 | Providing and fixing C.P. brass 32mm short bend complete |
| 34 | Providing and fixing in position concealed cistern including flushing plate of approved make (to the approval of the Engineer-in-charge) complete in all respect. |
| 35 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) including Rack Bolt Screw Pair 115mm long without CP fittings complete in all respect. Table Top (size 49 x 40 x 15 cm) |
| 36 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect.(B)) C.P. Brass Accessories: (iv)) C.P. brass toilet roll holder with flap |
| 37 | (vi)) C.P. brass towel rack 600mm long with lower hangers |
| 38 | (ii)) C.P brass towel ring square |
| 39 | (v)) C.P. Glass Shelf 600mm long |
| 40 | (A)) C.P. Brass fittings: (iv)) C.P. brass 15mm Concealed stop cock with adjustable wall flange with seal.(Outer +Inner Body) |
| 41 | (vi)) C.P. Brass Wall mixer with Non telephonic shower arrangement. |
| 42 | Providing and fixing jet spray with 2-6\\" long PVC pipe.(a)) With C.P. Brass nut |
| 43 | Providing and fixing Stainless steel health faucet complete in all respect. |
| 44 | Providing and fixing in position C.P. brass soap dish of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 45 | Providing and fixing in position C.P. brass Tumbler Holder of approved make (to the approval of Engineer-in-charge ) fixed into wall with rawl plugs and C.P brass screws complete in all respect. |
| 46 | Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect.(a)) Single lever concealed divertor of bath and shower system (with body and upper part) |
| 47 | Providing and fixing in position CP Brass single lever surgical mixer with swinging spout approved make (to the approval of Engineer-in-charge) complete in all respect. |
| 48 | (5Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in-charge) complete in all respect. CP Brass rain Fall Shower arm 18\\" length square chrome |
| 49 | Providing and fixing P.V.C Waste Pipe Collapsiable 32mm complete in all respect. |
| 50 | Providing & Fixing in postion stop cock / Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect. C.P.brass 15mm Angle valve without flange |
| 51 | Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete. |
| 52 | Providing & fixing in position PVC flexible tube connection of approved make (to the approval of Engineer-in-charge ) complete in all respect.PVC tube connection of size 15 mm x 450 mm with C.P. Brass nut |
| 53 | Providing & Fixing in position C.P. Brass flange Dome of approved make (to the approval of Engineer-in-charge ) under various fixtures complete in all respect. |
| 54 | Providing & Fixing in position C.P. Brass Hexa Nipple 15mm of approved make (to the approval of Engineer-in-charge ) complete in all respect. |
| 55 | Providing and Fixing Double Rebate windowframe of size 5\\" x 2.5\\" for twowindowshutters, (one shutter is of glass and other shutter is of wire gauze) withAnti termiteTreatment including all itsjoinery hingestowerbolt, handles with primerand paintcomplete in all respects as perHut No. 1 ordirection of Engineer-in-charge.Rate as per Quotation Attached |
| 56 | Providing and fixing of Door frame of 5\\" x2.5\\" with door shutter 40mmthick,lamination on both sides ofrequired colourwith all its joinery andanti-termite treatmentincluding hinges, door closer,door lock,towerbolt etc with Putty,Primer and Paint ondoor frame of required colourcomplete in allrespects and design as perHut No. 1 ordirections ofEngineer-in-Charge.Rate as per Quotation Attached |
| 57 | Providing and Fixing Almirah of wooden and19mm Plyboard (approx. 7‘6\\"x 4‘ x 2‘) withdouble shutter door (approx.5‘6\\" x 4‘) andtwo drawers (approx. 4‘ x 1‘each) includinganti termite treatment and allits joineryhandles, hinges, locks etc withall sides(inside and outside) laminateof requiredcolour and design as per HutNo. 1 ordirections ofEngineer-in-Charge.Rate as per QuotationAttached |
| 58 | Providing and Fixing Almirah 19mm Plyboard (approx. 7°6\\"x 4° x 2‘) withdouble shutter door (approx.4‘9\\" x 4‘), twodrawers (approx. 24\\" x 12\\"each), twodrawers (approx. 18\\" x 10\\"each) and doubleshutter door (approx. 30\\" x21\\") includinganti termite treatment and allits joineryhandles, hinges, locks etc withall sides(inside and outside) laminateof requiredcolour and design as per HutNo. 1 ordirections ofEngineer-in-Charge.Rate as per QuotationAttached |
| 59 | Providing and Fixing of ventilaventilators Frame and Ventilator shutter (doubleRebate) bothsides of size 3‘ x 2‘6\\"including Anti-termitetreatment with primer andpaint of required colour (Two Window Shutters,One FixedGlass and One opening forExhaust fan) anddesign as perHut No. 1 anddirections of Engineer-in-Charge.Rate as per Quotation Attached |
| 60 | Providing and Fixing of ventilaventilators Frame and Ventilator shutter (double Rebate) both sidesof size 16\\" x 2‘ includingAnti-termite treatment with primer and paint of required colour (One Fix Glass and opening for Exhaust fan) and design asper Hut No. 1 and directions of Engineer-in-Charge. Rate as per Quotation Attached |
| 61 | Providing and fixing of Main door frame 13\\"by 2.5\\" with door shutter withfixed glasswindow at main entranceincluding Antitermite Treatment with all itsjoinery, floormachine, joinery, hinges,locks, towerbolt etcand required coloredlaminates and design asper Hut No. 1 and directionsof Engineer-inCharge.Rate as per QuotationAttached |
| 62 | Providing and fixing of LED Wall unit of size 84\\" x 52\\" fabricated withWood, 19mmBWR Plyboard, LaminationSheets designed with 2\\" cove on all sides ofPanel with shelves (21\\" horizontal + 23\\" vertical + 60\\"horizontal) x 9.5\\", 03 Nos. CutOuts for Photos Display of size 6.5\\" x 10.5\\" and lamination of required colour on the surface and design as per Hut No. 1 or directions of Engineer-in-Charge. Rate as per Quotation Attached |
| 63 | Providing and fixing of LED Wall unit of size49\\" x 49\\" fabricated withWood, 19mm BWRPlyboard, Lamination Sheets,1.5\\" cove on allsides of Panel with One Nos.shelf 11\\" x 42\\"and drawer 13\\" x 30\\" x 6\\"with lamination ofrequired colour on the surfaceand design asper Hut No. 1 or directions ofEngineer-inCharge.Rate as per QuotationAttached |
| 64 | Providing and Fixing Vanity of 46\\" height using bWR board,wood andlamination all over (inside andoutside) ofrequired colour, 3\\" thick boardon top of thevanity covered with 12mmlacor toughenedglass of size 23\\" x 36\\" as perdesign of HutNo. 1 and directions ofEngineer-in-Charge.Rate as per QuotationAttached |
| 65 | Providing and installation of Sony make LEDTV108cm (43 inch)Rate as per Gem portal |
| 66 | Providing and Fixing Eco Solve Solvent Digital Vinyl Printing on 3M Vinyl Media with Lamination on 5mm Sunboard Size 10‘ x 4° including framing fabricated with 19mm BWR ply Board and 6mm Ply Board including wooden frameworkfor levelling of surface.As per quotation attached. |
| 67 | WATER SUPPLY Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications. v Providing, Laying , fixing & jointing of P.V.C. Pipes as per ISI-4985 (ISI marked with the prior approval of Engineer-in-Charge) along the Trenches and laying the same in Trenches to correct alignment and gradients, cutting, jointing and testing complete as per specifications.(xxii) 110mm o/d PVC pipe of 4 Kgf. / sqcm |
| 68 | (xxi) 90mm o/d pipe of 4 Kgf. / sqcm |
| 69 | CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge (c) CPVC SDR 11 Pipe & fitting 25mm o/d. |
| 70 | Electrical Fittings for Renovation Renovation of Hut No. 2 (Including Wiring, Modular Switches, LED Panels, Fans etc.) As per Annexure- |
| 71 | Dismantling Gypsum partitions, doors, windows,fixed glazing and false ceilingincluding disposal of unserviceable material andstacking of serviceablematerial within 50 meters lead as directed by Engineer-in-charge |
| 72 | Dismantling brick worktile, masonry or tile lining ((b)) In cement |
| 73 | Dismantling plank flooring |
| 74 | Dismantling cement conglomerate floors 25mm to 50mm thick including concrete base. |
| 75 | Dismantling glazed tiles (to be carefully removed). |
| 76 | Dismantling concrete Reinforced cement concrete |
| 77 | Dismantling plank ceiling and supporting timber |
| 78 | Providing and installation of 1.5 Ton All-Weather Split Air Conditioner including stabilizer and stands complete in all respects at site. (Make- Daikin) (WRD/25-26/Div Township/00037 |
| 79 | Providing furniture(2 box bed6 and side table (1'-3\\"x1'-6\\"), 1single sofa 2 seater (32\\"x54\\") , 3 single sofa single arm 32\\"x29\\", 1sofa 4 seater double arm (32\\"x 92\\"),2sofa 2seater double arm( 32\\"x 62\\") , 1 centre table large (47\\"x 23.5\\") , 1 centre table medium (39\\"x21\\") , 4 wooden bedroom chair , 2 wooden peg table (21\\"x 21\\") design and rate as per Hut No. 2 and directions of Engineer-in Charge. Please Enable Macros to View BoQ information |
