|
| 1 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exceeding 1.50 sqm each and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed. |
| 2 | Taking down chowkats or frames with shutters exceeding 1.5 Sqm sqm but not exceeding 4.00 sqm each (without taking off shutters from the frames) etc including builders hardware etc and removing from site and making good disturbed surface of walls in cement mortar (1:3) complete all as specified & directed. |
| 3 | Taking down shutters of any description exceeding 1.00 Sqm but not exceeding 2.0 Sq m each and removing from site, complete all as specified and directed by Engr-in-Charge . |
| 4 | Taking down shutters and refixing of shutter of any description exceeding 1.0 Sq m but not exceeding 2.0 Sq m in same opening after repar including suitable size hinge, if necessry for shutters complete all as specified and as directed. |
| 5 | Taking down shutters and refixing of shutter of any description exceeding 2.0 Sq m in same opening after repar including suitable size hinge, if necessry for shutters complete all as specified and as directed. |
| 6 | Taking down of old steel window and ventilators any type including guard bars complete all as specified and directed. |
| 7 | S&F for 1.25 mm thick pressed steel frames of size 105 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed.Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC. |
| 8 | S&F for 1.25 mm thick pressed steel frames of size 165 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc including plain cement concrete 1:3:6, type C-0 (using 12.5 mm graded crushed stone aggregate) as in filling in pressed steel door complete all as specified and directed.Note: The quoted unit rate under this item shall deemed to be included (i) one shop coat of primer (ii) a coat of bitumen paint of inner side of pressed steel door frame before filling of PCC. |
| 9 | M&L for PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in filling under steel door frames & hold fast blocks etc complete all as specified and directed. |
| 10 | M&L for framed brackets for door frames and cooler stand made of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. not exceeding 10 kg each brackets, conforming to Fe.290.Gde-E-165 and used for step/stairs, walk ways, railings, frame work of water tanks and similar work complete all as specified and as directed. |
| 11 | S&F for MS hooks (stay), heavy, for large gates, hook and pintle hinges, large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, and similar small articles conforming to Fe-290 Gde-E-165 with welding and necessary item complete all as specified and directed. |
| 12 | S & F 35 mm thick, factory made, 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. (divided into squares with plain, chamfered or rounded, mitred and rebated sash bars any number size of members), beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (a); kiln seasoned & chemically pressure treated etc complete all as specified and directed . (Note:-Glass / wire cloth shall be measured & paid separately. |
| 13 | S & F 35 mm thick factory made, second class hard wood Plain, framed, panelled shutters (two panels), with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated supplied and fitted to chowkats complete all as specified and directed . |
| 14 | M&L factory made flush shutters, 35 mm thick solid core construction with particle board core both face covered with decorative face veneer with lipping/frame to match, as per IS 2202(part-I, 1999) . The stiles & rails shall be with out any joint and made with non- coniferous timber hard wood (Hillock/ Mirantee/ Bosum/ Benteak) with moisture content not less than 12% as per IS code. The face panel comprising of ply wood or cross band and face veneers shall be glued by hot pressed process. The over all finished thickness of face panel shall not be less than 35mm while the thickness face veneer shall not be less than 0.6 mm complete all as specified and directed. |
| 15 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with & including mild steel hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 16 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/sq.mm and resistance to spread of flame of Class A category with property of being termite /borer proof, water/moisture proof and fire retardant and fixing with & including stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 17 | S & F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tubes suppyling & fixing in opening as per specification & drawing complete all as spcefied and directed by Engineer-in-Charge. |
| 18 | S&F for factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles) with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing Please Enable Macros to View BoQ information |
| 19 | S&F for factory made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles) with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing Please Enable Macros to View BoQ information |
