|
| 1 | Taking down of old roof treatment of any description including mud phushka,tiles,cement plaster from roof surfaces etc including cleaning ,brushing and watering to joints and grooves and throwing the same to a distance exc. 250 mtr and not exc 500 mtr from the roof of height 3 to 9 mtr etc complete all as specified and directed. |
| 2 | M&L for repair of All visible hairline cracks on concrete roof / screed more than 0.50 mm and not giving hollow sound, should be cut and widen in V shape with mechanical cutter in the size (10mm W x 6mm D). Fill cracks with PU sealant / Hybrid Sealant with suitable gun and smoothed with a putty knife or trowel. Allow sealant to cure a minimum (72 Hrs.) 3 days etc complete all as specified & directed. |
| 3 | M&L for Plain cement Concrete type B-0 1:2:4 ( 12.5 mm graded aggregate) 25 mm thick average as in roof padding etc complete all as specified & directed. |
| 4 | M&L for Apply one coat of primer after dilution of water proofing chemicals in the ratio of 1:1 in complete dry condition where moisture contain below 7% (should be checked with moisture meter). Allow the primer coat to dry for 6 to 8 hours. Apply 1st coat of Roof seal Classic or equivalent water proofing chemical without dilution spreading at the rate of 0.70/litre/Sq.mt/Coat until all surface is covered. Lay a 45 GSM Fibre glass mesh as a reinforcing material which is incorporated in the coating when the first coat is still in wet condition. Allow the first coat to dry for approximately 4 to 6 hours. Apply the second of chemical with the same application coverage, but in a direction perpendicular to that of the first and second coats. Allow each coat to air cure for a minimum of 4-6 hours after application. Check to see no void surface is left untreated / uncoated.Allow the system to air cure for 7 days minimum etc complete all as specified & directed. |
| 5 | Dismantling asbestos cement (corrugated, semicorrugated sheet/ North light curve, Ridge etc.) sheets in roof coverings complete all as specified and directed. |
| 6 | S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 7 | S&F of Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in ridge/roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 8 | S&F in repair Plain, galvanised, mild steel sheeting, 1.00 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 fixed with self tapping screws as specified complete all as specified and directed. |
| 9 | Demolition of brick work or stone masonry including all quoins,arches,pillars etc built in CM complete all as specified & directed. |
| 10 | M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified & directed. |
| 11 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick built in CM 1:4 complete all as specified & directed. |
| 12 | Dismantling Wall / ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets etc complete all as specified and directed. |
| 13 | S&F in repair 605x605mm snap grid of powder coated galvanized iron of angle of size 23 mm x 23 mm of 30 gauge (Perimeter), T section of size 23 mm x35 mm main and 23 mm x 27 mm (intermediate) of 30 gauge suitable for false ceiling including GI wire 6 mm thick @ 1200 mm centre to centre both ways for hanging arragement complete all as specified and directed. |
| 14 | M&L for 4mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to GI snap grid frame work complete all as specified & directed. |
| 15 | Refixing only 4 mm thick non asbestos fibre cement building board designer as in ceiling of size 600 x 600mm fixed to GI snap grid frame work complete all as specified & directed.Note: Board obtained from BOQ item No 12. |
| 16 | Taking down cement plaster on wall/ceiling/roof etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and as directed. |
| 17 | M&L for washed stone grit plaster on exterior walls in two layers , under layer 12mm th cement plaster 1:4 ( 1 cemant : 4 coarse sand ) furrowing the under layer with scratching tool , applying cement slurry on the under layer @ 3 Kg of cement per sqm , top layer 15 mm th cement plaster 1 :1 / 2 :2 ( 1 cement : 1/2 coarse sand : 2 stone chipping 10 mm nominal size ) in panels with groove all arround as per approved pattern incl. scrubbing and washing the top layer with brushes and water to expose the stone shipping complete all as specified & directed. |
| 18 | Forming groove of uniform size 15 mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens nailed to the under layer incl. removal of wooden battens , repair to the edges of panels and finishing the groove complete all as specified & directed. |
| 19 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick work / concrete surfaces and finishing the surfaces fair and smooth without using extra cement etc all as specified & directed. |
| 20 | Supply only liquid integral water proofing compound etc complete all as specified and directed. |
| 21 | M&L for rendering 10 mm thick cement plaster in CM 1:3 on brick work / concrete surfaces of ceiling,chhajja etc finishing the surfaces fair and even without using extra cement etc all as specified & directed. |
| 22 | M&L for rendering 12 mm thick cement plaster in CM 1:6 on brick work / concrete surfaces of walls & finishing the surfaces fair and even without using extra cement etc all as specified & directed. |
| 23 | Material & labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash to match the existing as required, complete all as specified & directed. |
| 24 | M&L for preparation of newly plastered surfaces of walls and applying three coat of white wash complete all as specified and directed. |
| 25 | M&L for two coats of OBD over a coat of average 2 mm thick wall putty on newly plastered surfaces complete all as specified and directed. |
| 26 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on new surfaces complete all as specified and directed. |
| 27 | M&L for Preparing old plastered surfaces of walls by brooming down or by steel wire brushing scraping down smoke soot, moulds moss and efflorescent salts and applying two coats of oil bound distemper complete all as specified and directed. |
| 28 | Material and Labour for preparation of old plastered surfaces of ceiling etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply two coat of white wash complete as specified and directed. |
| 29 | Material and Labour for preparation of old plastered surfaces of wall etc by brooming down by steel wire brushing, scrapping down smoke Soot, moulds, moss and trading oil and greasy spots etc and apply two coat of white wash complete as specified and directed. |
| 30 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surfaces incl. complete removal of existing treatment etc complete all as specified and directed. |
| 31 | M&L for 2 mm thick wall care putty on wall surface etc all as specified & directed. |
| 32 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified & directed. |
| 33 | Dismantling of stone slab of any description or thickness in floor ,step, riser etc laid bedded and pointed all as specified & directed. |
| 34 | Demolition of concrete in any description and in any position (unreinforced) complete all as specified and directed. |
| 35 | Material and labour plain cement concrete 1:2:4 type B-0 (12.50mm graded aggregate) 25mm thick as in sub floor, sub base, to receive tiles omplete all as specified and directed. |
| 36 | M&L for non skid ceramic coloured tiles (Premium quality) (squre/ rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm in floors etc set and jointed in neat cement slurry over 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match the tiles etc complete all as specified and directed. |
| 37 | Ditto all as per item no. 36 but in skirting over 10 mm thick 1:4 CM Plaster etc complete all as specified & directed. |
| 38 | M&L for glazed ceramic coloured tiles of size 450x300x7mm thick fixed on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry over 10 mm thick 1:4 CM Plaster and pointed in white or coloured cement to match complete all as specified and directed. |
| 39 | M&L for Vitrified tiles of light shade 8 to 10 mm thick (square/ rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc white cement and coloured pigment to match the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 40 | Ditto all as per item no. 39 but in skirting over 10 mm thick rendering in CM 1:4 etc complete all as specified and directed. |
| 41 | M&L for 20-25 mm thick machine cut kota stone slab flooring over 20mm thick cement screed bed in CM 1:6 , laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified & directed |
| 42 | M&L for 20-25 mm thick machine cut kota stone slab as in skirting, riser of step, dado and pillar etc over 15 mm thick cement plaster in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of stone slab including cutting, grinding, rubbing and polishing complete all as specified & directed. |
| 43 | M & L for 18-20 mm thick black granite of length and width as required including fixing, necessary cutting and support of angle at both corner and middle filled with pcc 1;2;4 or cement mortor 1;3 etc complete all as specified & directed. |
| 44 | Taking up or down 15 mm bore steel tubing including fittings and connections, including cleaning for Refixing or removal to store complete all as specified and directed . |
| 45 | S&F 15 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed . |
| 46 | Taking up or down 20 mm bore steel tubing/ PPR pipe including fitting and connections, including cleaning for Refixing or removal to store complete all as specified and directed. |
| 47 | S&F 20 mm bore Galvanized Steel tubes, medium grade with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed . |
| 48 | S&F 500 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve & nipple complete all as specified in SSR Part I including dismantling of storage tank. |
| 49 | S&F 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PVC float valve & nipple complete all as specified in SSR Part I including dismantling of storage tank. |
| 50 | S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified & directed. |
| 51 | S&F in repair 20 mm dia PVC float Valves high pressure, with polythene float and fly nut complete,screwed for Iron pipe or brass ferrule complete all as specified and directed . |
| 52 | S&F in repairs 5 mm thick bevelled edge mirror of selected quality glass of required size and shape with 50x20 mm teak wood polished beading mounted on 6 mm thick commercial ply wood / ACP / PVC and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 53 | S&F in repairs 600 x 450 mm bevelled edge mirror of selected quality glass 5 mm thick mounted on 6 mm thick commercial ply wood aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 54 | S&F in repairs Vitreous China wash hand basin white flat back size 550x400mm including brackets ,32 mm CP waste coupling and 32 mm pvc flexible waste pipe 800 mm long etc complete all as specified and directed . |
| 55 | S&F in repairs Vitreous China wash hand basin counter type white of size 550x440 mm including 32 mm CP waste coupling and rigid pvc waste pipe 800 mm long fixed over black granite etc complete all as specified and directed . |
| 56 | S&F Pillar taps long body cast copper alloy fancy type with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed. |
| 57 | S&F in repair PVC waste Pipe of 32 / 40 mm bore heavy duty type suitable for WHB / Sinks / Urinal discharge pipe etc complete all as specified and directed. |
| 58 | S&F in repairs Pillar taps long body cast copper alloy fancy type with capstan heads chromium plated scrwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts screwed for 15 mm dia iron pipe complete all as specified and directed . |
| 59 | S&F in repairs 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets & taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed . |
| 60 | S&F in repairs, CP Waste coupling (half or full threaded) 40 mm dia of discharge pipe suitable for stainless steel sink complete all as specified and directed. |
| 61 | S&F in repairs PVC connections 15 mm size with PTMT nuts of length 600 mm complete all as specified and directed. |
| 62 | S&F in repairs 15 mm bore CP stop cock/angle cock, cast copper alloy fancy type, screwed down high pressure, screwed for iron pipe or for unions and fixed complete all as specified and directed . |
| 63 | S&F in repair angular valve , 15mm dia, cast copper alloy,CP fancy type with long shank and cup screwd down, high pressure ,screwed both ends for iron pipes or for unions and fixed in pipe all as specified and directed. |
| 64 | S&F in repair CP tubular towel rail, 60 cm long, 20 mm bore, chromium plated complete all as specified & directed. |
| 65 | S&F in repairs Brass chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing to steel pipe or union. . |
| 66 | S&F in repair CI floor trap, plain including jointing with solvent cement (Diameter of outlet 75mm), jointing to waste pipe and fixed in cement concrete 1:2: 4 (type B1) mixed with pedilite water proofing liquid @ 200ml in 50 kg cement, inlcuding taking out of old unserviceable connections etc, connecting up new and making good disturbe portion complete all as specified and directed . |
| 67 | S&F in repairs C.P. grating 100/125 mm dia with or without centre hole etc all as reqd at site complete all as directed. |
| 68 | S&F in repairs vitreous China squatting pan (Orissa pattern), white, of size 580x440mm white, with CI 'P' or 'S' trap, integral foot rests including flush pipe, trap, lime concrete bedding inlcuding taking out of old lime concrete bedding, unserviceable connections etc connecting up new and making good disturbe portion complete all as specified and directed . |
| 69 | S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with CI 'P' or 'S' trap including connection to trap and cistern and flush pipe (excl flusingh cistern ) and making good to disturbed surface of floor all fixed as in repair all as specified and directed. |
| 70 | S&F in repair of plastic wc seat cover and mild steel chromium plated or aluminised hinging device as etc complete all as specified and directed. |
| 71 | S & F in repairs Flushing Health Faucet for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed completed all as specified and directed. |
| 72 | S&F in repair Flushing jet for pedestal pattern WC incl. flexible pipe and Brass Chromium Plated nuts and blots and water pipe of size 1150 mm long between dia & fixed complete all as specified and directed. |
| 73 | S&F in repair stop cock, (Concealed type) cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed. |
| 74 | S&F in repair bib taps long body cast copper alloy, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket or PPR pipe etc making good disturbed portion complete all as specified and directed. |
| 75 | Taking down eaves gutters and rainwater pipes (any size or pattern) from floor / wall including all fittings,heads, shoes, bends, swan-necks etc complete all as specified & directed. |
| 76 | S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints fixed to walls including making good disturbe portion to match the existing complete all as specified and directed . |
| 77 | S&F 100 mm bore cast iron soil, waste vent sand cast pipes in any length with or without ears, with cement joints laid in floor or in trenches including making good disturbe portion to match the existing complete all as specified and directed . |
| 78 | S&F 100 mm bore cast iron bends (any radius), diminishing pieces or tapers (larger bore measured) fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified and directed . |
| 79 | S&F 100 mm bore cast iron branch pieces, single (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches fitted with oval access doors and cement joint including making good disturbe portion to match the existing complete all as specified and directed . |
| 80 | S&F in clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) / CI Pipe for 100 mm bore pipe complete all as specified & directed. |
| 81 | S&F in clamps out of 50 mm by 5 mm flat iron fixed with suitable bolt / screws securing ends of stays to wall or roof for PVC (SWR) for 75 mm bore pipe complete all as specified & directed. |
| 82 | S&F 100 mm Cast Iron Cowl complete all as specified & directed. |
| 83 | S&F 110 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc complete all as specified and directed. |
| 84 | S&F 110 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 85 | S&F 110 mm PVC (SWR) junction single,(Single T) equal or unequal complete all as specified & directed. |
| 86 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints etc complete all as specified and directed. |
| 87 | S&F 75 mm bore PVC (SWR) bends of any radius complete all as specified & directed. |
| 88 | S&F 75 mm PVC (SWR) junction single,(Single T) equal or unequal complete all as specified & directed. |
| 89 | S&F 110 mm PVC Pipe Vent Cowl complete all as specified & directed. |
| 90 | S&F 75 mm PVC Pipe Vent Cowl complete all as specified & directed. |
| 91 | M&L for cleaning of water chamber of any size and depth for disposal of rain water, including properly cleaning off rubbish leaves and other foreign materials laying inside it and making it fully functionable including removing and refixing of cover and complete removal of debris from MOD Land to the full satisfaction of GE. |
| 92 | M&L for cleaning of valley gutter of any girth at any height, including properly cleaning off rubbish leaves and other foreign materials laying over it and complete removal of debris from MOD Land, making it fully functionable to the full satisfaction of GE. |
| 93 | S&F in repairs CP Soap dish 100mm dia fixed with cp screws etc complete all as specified and directed . |
| 94 | S&F in repairs Vitreous China Urinal, full stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws pointing arounds urinal back in cement , fixing of nozzles for discharge of water flushing pipe and grating and union for discharge pipes etc complete all as specified & directed. |
| 95 | Removing or dismantling of damage / cracked/ concrete /loose concrete / plaster of ceiling/ wall/ chajja/ facia to expose the sound and hard concrete using a suitable mechanical device or by hammer and chisels and complete removal of debris from MOD Land etc complete all as specified & directed. |
| 96 | M & L for applying 25 mm thick ( average ) repair mortar ready to use single component polymer modified repair mortar for repair of RCC members likes beams, columns, chajja and facia/Ceiling, mortar having good compressive strength and shrinkage resistance etc complete all as specified & directed. |
| 97 | M & L for applying bonding agent for bonding old to new concrete surface likes chajja/ beams/ celings/ columns/ facia etc by high performance modified Styrene- Butadiene Rubber ( SBR ) base binder . Applying of binder is as 10 sqm/ per lit etc complete all as specified & directed. |
| 98 | S&F in repair 25 mm pre cast decorative designer RCC jallies fixed in 100mm x100mm decorative designer post consists with precast concrete type B 0 1:2:4 ( 12.5 mm graded stone aggt ) set in cement mortar 1:4 over half brick base etc complete all as specified & directed. |
| 99 | S&F in repairs Brass CP basin / wall mixer for mixing hot & cold water srewed down for iron pipe and fixed for 15 mm dia pipe complete all as specified and directed. |
| 100 | S&F in repair PVC (SWR) pipes single socketed 200 mm bore, incl bend, shose, Tee, Y, as required, etc in any length with rubber ring joints fixed to walls/Pillar with MS clamp all as specified and directed. Please Enable Macros to View BoQ information |
