|
| 1 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) Including turbo ventilator at above 8mtr height complete all as specified. |
| 2 | Taking down Chowkats or frames not exc. 1.5 sq. m each with shutters & repair (without taking off shutters from the frames) and refixing in same opening including turbo ventilator at above 8mtr height complete all as specified. |
| 3 | Resecuring without taking down Chowkats or frames not exc. 1.5 sq. m each with shutters (without taking off shutters from the frames) including turbo ventilator at above 8mtr height complete all as specified. |
| 4 | S&F 600mm dia Turbo vent in roofs of hangers at above 8mtr height with or without frame complete all as specified. |
| 5 | Excavating in post holes (or similar holes) in soft/loose soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm, complete all as specified. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 7 | S&F Rolled mild steel sections as in framing for cladding, glazing & the like fixed with angle cleats & connecting plates, etc.Fe 410-W (Gde-E- 250) quality-A at a height of 8 to12 mtr complete all as specified. |
| 8 | S&F Wire netting aperture of size 20 mm galvanised steel wire 1.40mm dia fixed with tinned tacks of wire staples complete all as specified. |
| 9 | M&L for Reparing to hangar steel gates upto 8 mtr height and upto 4 mtr wide by welding & replacement ball bearings, hinges, oiling, greesing for smooth functioning of gates complete all as specified. |
| 10 | Dismantling of Plain or corrugated steel sheeting, any gauge,thickness, including Nainital or similar pattern roof coverings complete all as specified. |
| 11 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with hot dip galvanised self drilling fasteners with EPDM washers (one fastener on each crest) complete all as specified. |
| 12 | S&F 0.5mm thick galvalume sheet having stregnth of 550 mps fixed with self taping screw as in ceiling (over & below)/cladding to wall complete all as specified. |
| 13 | S&F 2 mm thickness fibre glass reinforced translucent corrugated (Polycarbonate) sheeting with two corrugation side lap fixe with coach screw and washer in roof, wall etc complete all as specified. |
| 14 | M&L for preparation of new steel surface of any description over 10cm in width or grith and appling two coat of synthetic enamel paint over priming with Redoxide complete all as specified. |
| 15 | Preparing old painted steel surfaces of any description over 10cm grith or width and applying one coat of synthetic enamel paint complete all as specified. |
| 16 | M&L for closing small openings with HDPE nylone netting square or hexagonal, 1mm dia thread, opening shall not exceedig 5 sqm binded with nylone thread at a height of 6 to10 mtr complete all as specified. |
| 17 | M&L for closing small openings with steel wire netting of dia 1.40mm and aperture not greater than 20mm by welding to existing frame, opening shall not exceedig 4 sqm at a height of 6 to10 mtr complete all as specified. |
| 18 | S&F for stainless steel spikes of 1.4mm dia along with 50mm wide rubber (protective pad) to fixed on desired location complete all as specified. Height upto 10 m |
| 19 | Dismantling boarding, any description, fixed in any position with nails complete all as specified. |
| 20 | S &F Anodised aluminium snap grid frame work for false ceiling all as specified |
| 21 | S&F Anodised aluminium snap grid frame work for false ceiling along with Armstrong Perforated particle board tiles for insulation and acoustic purposes 600x600 mm in size, 12 mm thick fixed with nails staples on snapgrid complete all as specified. |
| 22 | S&F Calcium silicate board 8mm thick of siliceous and calcareous material reinforced with cellulose fibre complete all as specified. |
| 23 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n exc 4 sqm each complete all as specified. |
| 24 | All item as per Ser No 23.00 above but n exc 1.5 sqm each complete all as specified. |
| 25 | S&F, Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 26 | S&F, Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips rubber neiprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc complete all as specified. |
| 27 | S&F, Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 28 | Supply & Fix sheet glass 5.5mm thick, ordinary quality and glazing with oil putty in each pane complete all as specified. |
| 29 | Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets complete all as specified. |
| 30 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc 15 cm thickness complete all as specified. |
| 31 | M&L for 75 mm thick Cement concrete type D - 2,1:4:8 (40 mm graded agg) as in sub base to floors incl well compacting & laid to levels complete all as specified. |
| 32 | roviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified. |
| 33 | M&L for Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified. |
| 34 | M & L for preparing old/ New or previously untreated surface of any description over 10cm widht or girth not otherwise described and applying Two coat of Synthetic Enamel paint of 1st grade quality, in one or more tints and pattern (camouflage) complete all as specified. |
| 35 | S&F in repair for door clouser(aluminium extruded body) hydreulically regulated, ,designation No 1 universal type, suitable for door shutters of 851 to 1000mm in width and of wieght not more than complete all as specified. |
| 36 | S&F floor door stopper of aluminium 150mm size complete all as specified. |
| 37 | S&F mild steel 4 Lever mortice lock, vertical type of size 100mm complete all as specified. Please Enable Macros to View BoQ information |
