|
| 1 | Excavation in foundation in ordinary soil including lift upto 1.50 M. and lead upto 30 M. and all complete as per S.I. No. 251. |
| 2 | C.Concrete work in 1:6:12 Cement, c/ sand, and 40 mm stone ballast including supply of all materials, labour , T & P etc. As per S.I.No 273(a) |
| 3 | M -150 Class B/W in 1:4 cement, coarse sand 1.25 F.M motar in superstructure in one brick thick wall including supply of all materials, labour , T & P etc. As per P.W.D. S.I. No. 305(a)+309+310 |
| 4 | M -150 Class B/W in 1:4 cement, coarse sand 1.25 F.M motar in foundation and plinth including supply of all materials, labour , T & P etc. As per P.W.D. S.I. No. 303(a) |
| 5 | 12 mm thick plaster in 1:4 cement and coarse sand mortar on brick work minimum thickness not to be less than 1 cm. including supply of all materials, labour,T & P etc. As per SI No 584(a) |
| 6 | Providing wall putty on new surface with approved quality material of berger/JK/Birla of similar make 2coat as per new item |
| 7 | Construction of granular sub base by providing well graded material spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achive desire density complete as per technical specification clause as per MORD 401 |
| 8 | Laying of 80 mm thick precast cement concrete I- shaped interlocking paver blocks with top layer of minimum 8 mm thickness having plan dimension 200x(160+120)mm O.P. cement, smooth high gloss finish, skid resistant; manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not be less than 30MPA (M-30) and weight 5.0 Kg per no . confirming to IS:15658-2006 including all and i/c 4cm sand layer |
| 9 | Finishing walls with weather coat of approved make and quality on new surface i/c all as per si no new chapter 8, 15.23 new item |
| 10 | Mild steel or iron work in purlins and rafters i/c drilling holes and fixing in position and including supply |
| 11 | Painting or varnishing work in small areas with one coat priming and two coat priming & two coat of approved paint i/c supply of all material |
| 12 | Supply & Fixing Galvanised Corrugated 1.0mm thick iron roof including all fitting |
| 13 | Repair of main gates including the alteration & Fixing of the gate |
| 14 | Providing and laying flamed finished Granite stone flooring with 20 mm thick Granite flooring or in skirting or dado laid with 1:4 cement and approved coarse sand mortar finished with cement slurry,jointing and polishing complete including supply of all materials,labour and T&P complete.(D.S.R si no 11.55.1) |
| 15 | Charge for Lettering and nomenclature on the Granite Stone |
| 16 | Supply & Fixing of Granite Stone having work details engraved including all complete work |
| 17 | Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete. |
| 18 | ADD GST 18% Please Enable Macros to View BoQ information |
