|
| 1 | Total of Schedule-A (DSR E&M 2025 Items) + Schedule-B (DSR 2023) + Schedule-C (NDSR Items) |
| 2 | Total of Schedule-D(Manpower Items) |
| 3 | Total of Schedule-A(DSR E&M 2025 Items ) |
| 4 | Total of Schedule-B(DSR 2023) |
| 5 | Total of Schedule-C(NDSR Items) |
| 6 | Total of Schedule-D(Manpower items) OCM-2236 APPENDIX- 3A PROFORMA FOR STATEMENT OF MINOR DEVIATIONS (Refer Clause C 2.2(d) and C 15.1 of ITT) 1. The following are the particulars of minor deviations from the requirements of the Tender Document: Sr. No Clause Deviations Price reduction for each deviation/s Note : 1. The Tenderer shall indicate price reduction against each deviation in Appendix-3A of BOQ. This price is the price which the tenderer shall reduce from this tender price if deviation(s) is/are accepted by the Employer. 2. Where there is no deviation, the statement should be returned duly signed with an endorsement indicating ‘No Deviations’. In case, Performa of deviations is not submitted or submitted as blank, it will be construed that the tenderer has not proposed any deviations from tender documents. 3. It shall be noted that in case Nil/Zero/NA Price quoted by Tenderer in Appendix-3A then it shall mean that contractor has quoted same price for deviation and undeviation bid. 4. If the tenderer proposes deviations in tender documents, and/or any other terms and conditions of the tender, other than in this Appendix, it will have no effect. Signature of authorized signatory On behalf of Tenderer OCM-2236 Preamble |
| 7 | The Bill of Quantities shall be read in conjunction with Notice Inviting Tenders, Instructions to Tenderers, General and Special Conditions of Contract, Employer's Requirement, Technical Specifications and other relevant documents. |
| 8 | BoQ1 consists of Schedule ‘A’ for DSR E&M 2025 Items , Schedule ‘B’ for DSR-2023 item , Schedule 'C' for NDSR Items & Schedule 'D' for manpower items . |
| 9 | The rates and prices to be tendered in the unit Priced Bill of Quantities of Schedule ‘A’ , 'B', 'C' & 'D' are for completed and finished items of works and complete in all respect. |
| 10 | Tenderers shall quote their offer in Indian Rupees (INR) only. Tenderers are required to be quoted percentage (%) Excess/Less for schedule-A, schdule-B, schedule-C & percentage (%) Excess in Schedule'D' in figures in the appropriate highlighted cells in the BoQ1 sheet. All the quoted rates will be deemed to include Duties, Taxes, Octroi, Royalty etc., cost of all plants, labour, supervision, materials, transport, all temporary works, erection, maintenance, utility identification, contractor’s profit and establishment/ overheads, together with preparation of design and drawings, all general risks, insurance liabilities, compliance of labour laws and obligations set out or implied in the contracts. For taxes and duties refer clause C2.5 of ITT & clause 10 of SCC. |
| 11 | If the tenderer fails to quote rates against any item, the tender may be treated as incomplete and non-responsive and shall be rejected. |
| 12 | Errors will be corrected by the employer for any arithmetical errors in computation or summation as per contract conditions. |
| 13 | The Financial Proposal (as per BOQ) shall be uploaded online on the website http://etenders.gov.in/eprocure/app. The rates shall be quoted in the excel file provided in the bid documents. The tenderer shall download the excel file and quote the rates against each highlighted cells in BoQ1. After quoting their rates the excel file shall be uploaded accordingly. The rates shall not be offered/quoted elsewhere in the technical submission/ tender submission. |
| 14 | The price offer in the BOQ shall be given without considering any deviation mentioned in Appendix-3 of FOT i.e. price in the box shall be quoted as per tender conditions without any deviation. |
| 15 | The actual work executed against all the BOQ as detailed in tender document would be paid on measurement basis. |
| 16 | The contractor may raise their “On Account” payments on monthly basis as per the status of work on the last day of the respective month as per clause 12 of SCC. |
| 17 | In case of DSR item the description is given in brief and detailed description of item should be as given in DSR 2023 published by CPWD. Please Enable Macros to View BoQ information DELHI METRO RAIL CORPORATION LTD. Bill of Quantity (BOQ) Contact No: OCM-2236: “Maintenance Contract of Fire Fighting System from JW to NWD metro station in Line-3 section.” S.No Description Unit Qty. Rate (₹) (including GST) Amount (₹) (including GST) Schedule 'A' DSR E&M 2025 Items |
| 18 | Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 27.7.6 80 mm dia Meter 700.0 2277.0 1593900.0 27.7.7 100 mm dia Meter 500.0 3077.0 1538500.0 27.7.8 150 mm dia Meter 1800.0 4299.0 7738200.0 27.7.9 200 mm dia (wall thickness 6.3 mm) Meter 20.0 6620.0 132400.0 Supplying and fixing Single headed external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required : 0.0 27.10.2 Single headed Stainless steel Each 10.0 6632.0 66320.0 |
| 19 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required : 27.11.4 80 mm dia Each 25.0 5406.0 135150.0 27.11.5 100 mm dia Each 25.0 7271.0 181775.0 27.11.6 150 mm dia Each 50.0 9737.0 486850.0 27.11.7 200 mm dia Each 5.0 16248.0 81240.0 |
| 20 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 27.14.4 80mm dia Each 20.0 8255.0 165100.0 27.14.5 100mm dia Each 20.0 11853.0 237060.0 27.14.7 150mm dia Each 50.0 18884.0 944200.0 27.14.8 200mm dia Each 5.0 30896.0 154480.0 |
| 21 | Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: 27.19.2 4 way - 150 mm dia M.S. Pipe Each 15.0 14820.0 222300.0 |
| 22 | Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approvedshade as required. Total of Schedule 'A' DSR E&M 2025 Items 13774485.0 Total of Schedule-A (DSR E&M 2025 Items) (Exclusive of GST@18%) 11673292.37 GST @ 18.00% 2101192.63 Total of Schedule-A (Inclusive of all, GST@18%) 13774485.0 DSR Schedule-B (DSR-2023 item) |
| 23 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 4.1.2 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Cum 5.0 8340.85 41704.25 |
| 24 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 5.1.2 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from naturalsources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) cum 8364.20 Cum 5.0 9045.75 45228.75 |
| 25 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (including equivalentdesign mix) cum 10.0 2434.25 24342.5 |
| 26 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. 10.25.2 In gratings, frames, guard bar, ladder, railings, brackets,gates and similar works KG 2000.0 172.6 345200.0 |
| 27 | Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in aserviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin-charge .The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. |
| 28 | Providing and erecting 2.00 metre high temporary barricading at site; each panel of size 2.50mx2.00m made of 40x40x6mm angle iron or 50x50x3mm hollow MS tube posts/horizontal members/bracings covered with 1.63mm thick MS sheet. The sheet shall be fixed with 30x5mm MS flat by suitable welding/riveting. The panels shall be made so that gap of 50cm above the ground is available making overall height as 2.5m. MS channel ISLC 75 @ 5.70 kg/m, 50cm long shall be provided at the bottom having oval shaped holes of size 50x25mm at both ends with 50cm long MS angle 40x40x6mm bracing. Suitable arrangement shall be made to fix the barricading to avoid from overturning by providing 250mm long expansion fasteners at both ends. The work shall be executed as per drawing/direction of Engineer-in-Charge which includes writing and painting, arrangement for traffic diversion such as traffic signals during construction at site for day and night, glow lamps, reflective signs, marking, flags, caution tape as directed by the Engineer-in-Charge. The barricading provided shall be retained in position at site continuously i/c shifting of barricading from one location to another location as many times as required during the execution of the entire work till its completion. Rate include its maintenance for damages, painting, all incidentals, labour materials, equipments and works required to execute the job. The barricading shall not be removed without prior approval of Engineer in-Charge. |
| 29 | Providing and laying S&S Centrifugally Cast (Spun) / Ductile IronPipes conforming to IS : 8329 : 18.72.18 250 mm dia Ductile Iron Class K-9 pipes meter 30.0 3516.8 105504.0 |
| 30 | Providing and laying Double Flanged (Screwed/ Welded) Centrifugally (Spun) Ductile Iron Pipes of Class K - 9 conforming to IS : 8329 : 18.73.4 250 mm dia Ductile Iron Double Flanged meter 30.0 4696.15 140884.5 Any other DSR Items 1500000.0 Total of Schedule-B (DSR-2023 item) 3702564.0 Total of Schedule-B (DSR-2023 item) with CPWD indexation @ 0.973 3602594.77 Total of Schedule B(DSR 2023)(Exclusive of GST@18%) 3053046.42 GST @ 18.00% 549548.36 Total of Schedule-B (Inclusive of all, GST@18%) 3602594.78 Schedule-C (NDSR Items) |
| 31 | Design and construction of Concrete thrust blocks at bends of pipe line as per direction of engineer incharge (As per necessary material and labour with 25 mm thick flange) |
| 32 | Disemtling SMC panel tank by removing each frame by unbolting the SS nut , bolt and washers of each frame joint and removal of all damaged sealent tap safely without dmaging SMC panel. |
| 33 | Reinstalling SMC panel tank including sealent tap (Size thickness 2- 2.5 mm ), SS nuit and bolts M12x175 as per requirement & amainataning the true water level & Total of Schedule C NDSR Items 1647439.02 Total of Schedule C (NDSR Items)(Exclusive of GST@18%) 1396134.76 GST @ 18.00% 251304.26 Total of Schedule-C (Inclusive of all, GST@18%) 1647439.02 Schedule-D (Manpower items) |
| 34 | Providing welder for welding work with welding machine to carry out welding as per the directions of Engineer in charge. The rate is inclusive of the cost of consumable (Electrodes). |
| 35 | Providing plumber/fitter/carpenter for miscellaneous civil work with all required T&P as per direction of Engineer in Charge. |
| 36 | Providing mason for repair works with all required T&P i.e. chiesel, trawel, bucket, pan etc as per direction of Engineer in Charge. |
| 37 | Providing helper/beldar for miscellaneous civil works with required T&P as per direction of Engineer in Charge. Total of Schedule D manpower items 404848.8 Total of Schedule D manpower items(Exclusive of GST@18%) 343092.2 GST @ 18.00% 61756.6 Total of Schedule-D (Inclusive of all, GST@18%) 404848.8 Grand Total Schedule-A + Schedule-B + Schedule-C + Schedule-D (Inclusive of all, GST@18%) 19429367.6 |
