|
| 1 | Centering & shuttering columns (square or rectangular or poly gonal in plain) |
| 2 | Centering & shuttering beams for sides and soffits of beam, beams, launching griders, bresumers, lintels |
| 3 | Centering & shuttering for flat surfaces such as suspended floors, roofs, landings, chajjas shelves etc |
| 4 | Reinforced cement concrete M-25 mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibrated byneedle vibrator but excluding steelreinforcement centring and shuttering insuperstructure. |
| 5 | First clas burnt brick work laid in cement sand mortar 1:4 in first storey upto 4 metres above plinth level |
| 6 | Providing and laying vitrified floor tiles indifferent sizes in light colour shades madeusing Soluble Salt Technology (thickness to bespecified by the manufacturer) with waterabsorption’s less than 0.08% and conformingto IS : 15622 of approved make in all coloursand shades, laid on 20mm thick cementmortar 1:4 (1 cement: 4 fine sand),complete. ( Soluble salt Print Penetrationshould be up to 1 to 2 mm after the tiles arefired & polished ). size 800x800 mm |
| 7 | Plaster 12.5mm thick cement plaster 1:4 |
| 8 | Finishing walls with cement based water soluble exterior paint such as snowcem, robbiacem etc two or more coats to give an even shade |
| 9 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 10 | Deodar wood doors shutter windowsshutter including hinges screw and cords etc complete fixed in position panelled, glazed or glazed and panelled 35 mm thick |
| 11 | Supplying Pressed steel sheet frames(chowkhat) consisting of 18gauge (1.25 mmthick steel sheet of the specified section,including iron lugs (hold fast) iron hingesconforming to PWD specification includingbolts for fixing stops lock notch provision forreceiving tower bolts and finished with 1primer coat approved quality, fixed in positionexcluding the cost of cement concrete 1:3:6for fillings in the frame and cement concrete1:2:4 for lugs complete door and windows frame of size151mmx60mm with 35 mm wide double rebate weighing 3.95 kg per meter |
| 12 | Cold twisted detormed (Ribbed/Tor steel) Bars (Fe 550 grade as per IS 1786-2008) for RCC works where not including in the complete rate of RCC including binding bending and placing in position complete |
| 13 | RECESSED HDPE PIPE WIRING SYSTEM WITHFLUSH PIANO TYPE SWITCHES:Wiring in PVC insulated copper conductor single core FR cable (ISI marked), overall1.5sq. mm, 1100volts grade to be laid in HDPE conduit pipe 20mm/25mm dia. (ISI Marked),recessed in wall etc., complete with powder coated/anodized concealed metal boxes(1.6mm thick with Brass lugs) required for having (Flush/ Piano type accessories) Steptype electronic fan regulators 100watts (socket size), bell push, 5Pin 6Amp. sockets(4Module Box), 16Amp. universal sockets (6Module Box), 6/16/20Amp. Switches etc.and covered with brown bakelite white glazed translucent backside painted sheet 3mm thick etc., PVC connector (For Fan Box and CallBell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circularjunction Boxes (Four way PVC 11⁄2\\" deep for walls and CI 3\\" deep for ceiling), bonding toearth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm,1100volts grade (For 6Amp. wall socket & plugcontrol point) and other petty material etc.,including the cost of above material, cuttingand filling up of chases (with finishing thesurface):- wiring fanpoint Fan point wiring |
| 14 | Wiring light point |
| 15 | Wiring 6amp, wall socket point |
| 16 | Wiring 16/20 amp power plug control point |
| 17 | LED lights 20w |
| 18 | 48\\" ceilging fans Please Enable Macros to View BoQ information |
