|
| 1 | Dismantling concrete (Reinforced cement concrete) |
| 2 | \\"Loading of malba by mechanical means (Stone (building or pitching) Sand, Earth, FlyAsh, Bajri, Shingle, Spalls, Brick bats, Brickballast and Stone metal.)\\" |
| 3 | \\"Removal Earth,Surkhi, Sand, Earth, Fly Ash, Bajri, Ballast, Stone upto 5 kmboulders, Kankar and building rubbish, Earth.\\" |
| 4 | \\"Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides oftrenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres.\\" |
| 5 | \\"Cement concrete 1:8:16 With stone aggregates 40mm gauge mixing by mechanical means using concretemixer volumetric type\\" |
| 6 | \\"Reinforced cement concrete M-25mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steelreinforcement centring and shuttering infoundation and plinth\\" |
| 7 | \\"Reinforced cement concrete M-25mechanically batch mixed using batch typeconcrete mixer as per IS:1791 and vibratedby needle vibrator but excluding steelreinforcement centring and shuttering insuperstructure.\\" |
| 8 | \\"First class burnt brick work laid in cement sandmortar 1:4 in foundation and plinth\\" |
| 9 | \\"Shuttering for faces of concrete foundations and foundationbeam & plinth beam (vertical or battering)\\" |
| 10 | \\"Centering and shuttering for columns (Square or rectangularor poly gonal in plain)\\" |
| 11 | \\"Centering and shuttering for flat surfaces such assuspended floors, roofs, landings, chajjas, shelves etc.\\" |
| 12 | \\"Cold twisted detormed (Ribbed/ Tor steel) Bars(Fe 500 grade as per IS 1786-2008) , for R.C.Cworks, where not including in the complete rate ofRCC including bending and binding placing inposition complete\\" |
| 13 | Centering and shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels |
| 14 | Supplying and fixing of Japani sheet frames (Chowkat) consisting of 18 gauge (1.25mm) thick steel sheet of the specified section (standard design latest), including iron lugs (hold fasts) iron hinges conforming to PWD specifications including bolts for fixing steps, lock notch provision for receiving tower bolts and finished, fixed in position including the cost of cement concrete 1:3:6 for filling in the frame and cement concrete 1:2:4 for lugs complete to the satisfaction of Engineer-in-charge. Door and window frame of size 113mmx60mmxwith 35mm wide single rebate |
| 15 | \\"First class burnt brick work laid in cement sandmortar 1:5 in first storey upto 4 metres aboveplinth level.\\" |
| 16 | 12.5 mm thick cement plaster 1:5 |
| 17 | Providing & Fixing glass panes with nails and putty or wooden strip complete in all respect Glazing area above 0.09 sqm 5.0mm thick Plate glass (INDIAN) |
| 18 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. panelled, glazed or glazed and panelled. 35 mm thick |
| 19 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position Commercial with elm or gurjan facing on both \ Sides with laminated core and lipped edges:- 30mm thick |
| 20 | Cost of aluminum fittings complete for doors, windows such as tower bolts, handles,Stoppers and screw etc. for these fittings (Excluding sliding bolt) For shutter area above 0.50 sqm |
| 21 | Providing & fixing 12\\" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge. |
| 22 | Base course of floor consisting of 100mm thick cement concrete 1:8:16 and 100mm sand filling using mechanical mixer for mixing of material |
| 23 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. ( Design is homogenous throughout the tile body ). Size 600x600 mm skirting |
| 24 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 including grouting with cement sand mortar 1:4 top surface to be left clean after wire brushing |
| 25 | Cement concrete 1:2:4 gola 10cm x 10cm concave quadrant along junction of roofs with parapet wall finished smooth, where specially specified. |
| 26 | 115mm thick brick wall in cement sand mortar 1:5 without reinforcement in superstructure |
| 27 | Preparation of plastered or concrete surface for painting (including sand papering the surface) using ready mixed cement based wall putty by applying two or more coats to get required finish |
| 28 | Applying priming coat with cement primer in all shade on newly plastered or concrete exterior surface |
| 29 | Wall painting with plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) |
| 30 | Wrought iron & Mild steel ladders, framed grills, gratings etc. with ends of bars riveted or molded forged framed window guards, barred iron doors stair case iron railing etc. including cost of bolts and nuts, screws, welding rod complete fixing in position |
| 31 | Public health 1% |
| 32 | Electrical 2.3% Please Enable Macros to View BoQ information |
