|
| 1 | First class burnt brick work laid in cement sand mortar 1:5 in first storey upto 4 metres aboveplinth level. |
| 2 | 12.5 mm thick cement plaster 1:4 |
| 3 | Finishing walls with cement based water soluble exterior paint such as snowcem,robbiacem etc. two or more coats to give aneven shade |
| 4 | Applying priming coat with cement primer in all shade on newly plastered or concreteexterior surface |
| 5 | Wire Gauge Golden Champ wood door shutterwithout springs housed in chowkhat 30 mm thick |
| 6 | Providing and fixing glazing in aluminum door,window, ventilator shutters and partitions etc.with PVC Plug/ neoprene gasket etc. completeas per the architectural drawings and thedirections of engineer-in-charge . (Cost ofaluminum snap beading shall be paid in basic item) Float glass panes of 5 mm thickness |
| 7 | Providing and fixing hydraulic door closer ISImark with necessary screw etc. complete P/L M-25 |
| 8 | tiles terricing |
| 9 | P/Inst electric wirirng wam recassed pvc condu.for fan point |
| 10 | for light point |
| 11 | tube set 20w |
| 12 | P/Inst celling fan 48\\" |
| 13 | Cold twisted detormed (Ribbed/ Tor steel) Bars (Fe 550 grade as per IS 1786-2008) , forR.C.C works, where not including in thecomplete rate of RCC including binding,bending and placing in position complete |
| 14 | Providing & fixing T-iron frames for doors, windows and ventilators of mild steelTee-sections, joints mitered and welded with15x3mm lugs, 10cm long embedded incement concrete blocks 15x10x10 cm of 1:3:6or with wooden plugs and screws or with dashfastener or rawl plugs and screws or withfixing clips or with bolts and nuts as requiredincluding fixing of necessary butt hinges andscrews and applying a priming coat ofapproved steel primer. |
| 15 | Providing and fixing in position Chinaware European type water closet P trap or S trap ofapproved make (to the approval of theEngineer-in-charge) consisting of 10 ltr. PVCflushing cistern ISI marked, PVC short bend32 mm dia including cost of seat covercomplete in all respect and to the entiresatisfaction of Engineer-in-charge. |
| 16 | Providing and fixing in position vitreous Chinaware white lIndian make large flat back or angular lipped front urinal 375 x 390 x 590mm of approved make (to the approval of theEngineer-in-charge) consisting of C.P. brassUrinal waste Coupling dome type 32mm outerlength 75 mm , C.P. brass Urinal SpreaderOcular-Regular and C.P. brass tube connection300 mm long complete |
| 17 | Providing and fixing in position vitreousChinaware white laboratory sinks of approvedmake (to the approval of Engineer-in-charge)consisting of a pair of brackets, C.P. brasswaste 40mm complete in all respect Size 470mmx370mmx180mm |
| 18 | Extra for providing and fixing 10 litres capacity Chinaware low level flushing cistern with PVCinternal fitting, instead of 10 litres capacityPVC flushing cistern |
| 19 | Tile terracing laid dry over roof consisitng of one layer of tiles 22.86x11.43x3.83 includinggrouti |
| 20 | P/Inst. 1.5ton split AC |
| 21 | Provision for water supply and sanination fixtures for toilet block |
| 22 | Providing and laying vitrified floor tiles indifferent sizes in light colour shades madeusing Soluble Salt Technology (thickness to bespecified by the manufacturer) with waterabsorption’s less than 0.08% and conformingto IS : 15622 of approved make in all coloursand shades, laid on 20mm thick cementmortar 1:4 (1 cement: 4 fine sand),complete. ( Soluble salt Print Penetrationshould be up to 1 to 2 mm after the tiles arefired & polished ). Size 800x800 mm |
| 23 | Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete |
| 24 | Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost ofany fittings other than specified above but including labour for fixing the same in position Please Enable Macros to View BoQ information |
