Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolishing cement concrete nominal concrete 1:5:10 (One cement : five sand : ten graded stone aggregate) or richer mix (including equivalent design mix) manually/ by mechanical means including disposal and transportation of the unuseful material for disposing at dumping site( to be arranged by the contractor) including entire carriage of material with in all leads and lifts and as per the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 2 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains for all kinds of soil and ordinary rocks including dressing of sides and ramming of bottoms upto all lifts including getting out the excavated soil and disposal and transportation of surplus excavated soil / unuseful material for disposing at dumping site( to be arranged by the contractor) within all leads and lifts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 3 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 4 | Centering and shuttering including strutting, propping etcetera and removal of form work in Foundations, footings, bases for columns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 5 | Centering and shuttering including strutting, propping etcetera and removal of form work in Suspended floors, roofs, landings, balconies and access platform including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 6 | Centering and shuttering including strutting, propping etcetera and removal of form work in Lintels, beams, plinth beams, girders, bressumers and cantilevers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 7 | Centering and shuttering including strutting, propping etcetera and removal of form work in Stairs, (excluding landings) except spiral stair cases including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 8 | Centering and shuttering including strutting, propping etcetera and removal of form work in Columns, piers, abutments, pillars, posts and struts including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 9 | Centering and shuttering including strutting, propping etcetera and removal of form work in Circular Columns including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 10 | Centering and shuttering including strutting, propping etcetera and removal of form work in edges of slabs and breaks in floors & walls under 20 cm (twenty centimetre wide including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 11 | Providing and laying in position cement concrete of specified grade 1:5:10 (one cement : five coarse sand : ten graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate in retaining wall, breast wall, walls of any thickness and like structures including the cost of centering and shuttering including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 12 | Providing and laying in position cement concrete of specified grade 1:4:8 (one cement : four coarse sand : eight graded stone aggregate) 40mm ( forty millimetre) nominal size graded stone aggregate upto plinth level excluding the cost of centering and shuttering including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 13 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-30 (M-Thirty ) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with minimum cement content of 400Kg ( four hundred kilogram) per cubic metre excluding the cost of centering, shuttering, finishing and reinforcement in all work upto plinth level in foundation, footings , bases of columns and the like and mass concrete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 14 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-30 (M-Thirty) grade, stone aggregate 20 mm (twenty millimetre) nominal size) with minimum cement content of 400Kg ( four hundred kilogram) per cubic metre in beams, suspended floors, roofs having slope up to 15° ( fifteen degree) landings, balconies, shelves, chajjas, lintels, bands, plain window sills, stair cases and spiral stair cases above plinth level up to all floor level, excluding the cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 15 | Providing and laying mechanically mixed and vibrated design mix reinforced cement concrete of M-30 (M-thirty ) grade, stone aggregate 20 mm (twenty millimetre) nominal size with mimimum cement content of 400Kg ( four hundred kilogram) per cubic metre in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etcetera above plinth level up to all floor level, excluding cost of centering, shuttering, finishing and reinforcement including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 16 | Providing and laying damp-proof course 40mm ( forty millimetre) thick with cement concrete 1:2:4 ( one cement : two coarse sand : four graded stone aggregate 12.5mm ( twelve point five millimetre) nominal size including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 17 | Providing and applying a coat of residual petroleum bitumen of grade of VG-10(ten) of approved quality using 1.7 kg ( one point seven kilogram ) per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 18 | Smooth finishing of the exposed surface of R.C.C. work with 6 mm(six millimetre) thick cement mortar 1:3 (one Cement : three fine sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 19 | Steel reinforcement (TATA /SAIL / JINDAL PANTHER/ Shyam steel make) for R.C.C. work including straightening, cutting, placing in position and binding all complete work including cost of binding wire upto all floor level Thermo-Mechanically Treated bars of grade Fe-500D or more steel bars including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 20 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 ( seven point five) in foundation and plinth above plinth level upto all floor levels, in Cement mortar 1:6 (one cement : six coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 21 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 (seven point five) in super structure above plinth level up to all floor level in cement mortar 1:4 ( one cement : four coarse sand) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 22 | Supplying and stacking of hard stone (for stone pitching and under flooring ) 22.5cm (twenty two point five centimetre) thick at site including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 23 | Providing and fixing 12mm (Twelve millimetre) thick prelaminated particle board flat pressed three layer or graded wood particle board HDMR conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etcetera Pre-laminated particle board with decorative lamination on both sides (Action Tesa,Century Ply,Green ply,Kit ply make ) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 24 | Providing and fixing Cup Board Shutters 25 mm ( twenty five millimetre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board (HD HMR) IS: 12823 marked of Action TESA / Green Ply/ Kit Ply/ Century Ply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including second class teak wood lipping of 25 mm ( twenty five millimetre) wide x12 mm ( twelve millimetre) thick with necessary screws and bright finished stainless steel piano hinges, complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 25 | Providing and fixing 12mm ( Twelve millimetre) thick commercial ply conforming to IS : 1328 BWR type of Action Tessa, Kitply,Green Ply, Century Ply make, plain lining with necessary screws/nuts and bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete (Frame work shall be paid for separately) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 26 | Providing and fixing 1.00 mm ( one millimetre) thick decorative high pressure Lamination Sheet of Greenlam/ Century ply / Kit ply make plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 27 | Providing and fixing second class teak wood lipping/ moulded beading or taj beading of size 18X5 mm ( eighteen into five millimetres ) fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 28 | Providing wood work in frames of doors, windows, clerestory windows and other frames, Second class deodar wood wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length complete upto all floor level including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 29 | Providing and fixing 35 mm (Thirty five millimetre) thick shutters Second class deodar wood panelled or panelled and glazed shutters for doors, windows and clerestory windows fixing with butt hinges of required size with necessary screws, complete upto all floor level including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 30 | Providing and fixing 35 mm (Thirty five millimetre) thick Second class teak wood Glazed Shutters for doors, windows and clerestory windows using 4 mm (Four millimetre) thick float glass panes of Modiguard Saint Gobain, Asahi make (weight not less than 10kg/sqm (ten kilogram per square metre) including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 31 | Providing and fixing 35 mm (Thirty five millimetre) thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws ISI marked conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st (First) class hard wood and well matched teak 3 (three) ply veneering with vertical grains or cross bands and face veneers on both faces of shutters including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 32 | Providing and fixing 35 mm (thirty five millimetre) thick Second class teak wood Wire Gauge Shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm( one point four millimetre) in both directions with wire of dia 0.63 mm,(zero point sixty three millimetre) for doors, windows and clerestory windows with hinges and necessary screws with ISI marked Stainless Steel butt hinges of required size all complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 33 | Providing and fixing 12 mm (Twelve millimetre) thick toughened glass door shutter of approved brand and manufacture, including providing and fixing top and bottom, pivot and double action hydraulic floor spring type fixing arrangement and making necessary holes etcetera for fixing required door fittings complete as per the architectural drawings and the direction of Engineer-In-Charge (cost of glazing, snap beading shall be paid in basic item) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. |
| 34 | Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m (One point five zero metre) in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm (One point six zero ± zero point two millimetre) thick galvanized mild steel section made from roll forming process of required length (shape and size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg (Forty kilogramme)), G.I fasteners 100 x 8 mm (One hundred into eight millimetre) size for fixing frame to finished wall and necessary stainless steel screws etcetera Profile of frame and sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etcetera After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing and direction of Engineer-inCharge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% (Five percent) tolerance in dimension i.e. in depth and width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) made of (big series) frame 116 x 45 mm (One hundred sixteen into forty five millimetre) & sash 46 x 62 mm (Forty six into sixty two millimetre) both having wall thickness of 2.3 ± 0.2 mm (Two point three ± Zero point two millimetre) and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm (One point seven five square metre) including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 35 | Providing and fixing 6mm (Six millimetre) thick toughened glass with L connection etcetera and fixing with silicon sealant complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 36 | Providing and fixing glazing with double glass unit 6mm (Six millimetre) thickness and filled with 8mm (Eight millimetre) thick Argon gas (weight not less than 14.96 kg/sqm (fourteen point nine six kilogramme per square metre) as per HPPWD Specifications including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 37 | Providing and fixing 4mm (Four millimetre) thick frosted glass panes with putty and glazing clips in steel doors, windows, clerestory windows complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 38 | Providing fixing fly proof SS 304 (three hunfred four) Grade wire mesh powder coated to windows and clerestory windows using wire gauge with average width of aperture 1.4mm (One point four millimetre) in both directions with wire of dia 0.63mm (Zero point six three millimetre) complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 39 | Providing and fixing 300x16 mm (Three hundred into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 40 | Providing and fixing 250x16 mm (Two hundred fifty into sixteen millimetre) nominal size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etcetra. complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 41 | Providing and fixing 200x10 mm (Two hundred into ten millimetre) nominal size. aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 42 | Providing and fixing150x10 mm (One hundred fifty into ten millimetre) nominal size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 43 | Providing and fixing 125 mm (One hundred twenty five millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 44 | Providing and fixing 100 mm (one hundred millimetre) aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 45 | Providing and fixing 150 mm ( one hundred fifty millimetre) bright finished floor Brass Door Stopper with rubber cushion, necessary brass screws etcetra to suit shutter thickness complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 46 | Providing and fixing bright finished Brass hard drawn hooks and eyes 150 mm (One hundred fifty millimetre) complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 47 | Providing and fixing 150mm ( one hundred fifty millimetre ) bright finished Brass hasp and staple (safety type) with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 48 | Providing and fixing Triple strip vertical type magnetic catcher of approved quality (Hettich/Godrej) in cupboard / ward robe shutters, including fixing with necessary screws etcetra complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 49 | Providing and fixing chromium plated brass 50 mm ( fifty millimetre) cupboard or wardrobe knobs (Link/Godrej/Hettich Make) with nuts complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 50 | Providing and fixing 40mm ( forty millimetre) special quality bright finished brass cupboard or ward robe locks (Link/Godrej /Hettich Make) with six levers of approved quality including necessary screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 51 | Providing and fixing 20mm ( twenty millimetre) dia chromium plated brass Curtain Rod with Knobs at ends having wall thickness of 1.25mm ( one point two five millimetre) with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etcetra wherever necessary complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 52 | Providing and fixing aluminium die cast body tubular type Universal hydraulic door closer (having brand logo with ISI, IS :3564, embossed on the body, door weight upto 35 kg (Thirty five kilogramme) and door width upto 700 mm (Seven hundred millimetre), with necessary accessories and screws etcetera complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 53 | Providing and laying Full Body Matt Finish vitrified floor tiles 600X600mm (six hundred into six hundred millimetre) ( minimum thickness 10mm ( ten millimetre) ) of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shades, laid on 20mm (twenty millimetre) thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etcetera, complete at all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 54 | Providing and laying Full Body Matt Fininsh Vitrified tiles in sizes 600X450mm (six hundred into four hundred fifty millimetre) ( minimum thickness 10mm ( ten millimetre) ) of approved make Nitco /Kajaria / Simpolo /Johnson / Somany, in all colours and shade, in skirting, riser of steps, over 12 mm (twelve millimetre) thick bed of cement mortar 1:3 (One cement: Three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm (three point three kilogram per square metre) including grouting the joint with white cement and matching pigments etcetera complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 55 | Providing and laying Vitrified Floor Tiles of size 300x300 mm (three hundred into three hundred millimeter) ( minimum thickness 10mm ( ten millimetre)) of 1st quality conforming to IS : 15622, of Orient bell/ Kazaria/ AGL/ Rak/ Johnson & Johnson approved make, in all colours and shades of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm (twenty millimetre) thick Cement Mortar 1:4 (one Cement : four Coarse sand), jointing with grey cement slurry @ 3.3kg/ sqm (three point three kilogram per square metre) including grouting the joints with white cement and matching pigments etceteracomplete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 56 | Providing and fixing 1st quality HD series Digital Glazed rectified ceramic tiles 300mmx300mm ( Three hundred millimetre into three hundred millimetre ) ( minimum thickness 10mm ( ten millimetre)) of Orient bell/ Kazaria/ Rak/Johnson & Johnson make , in all colours, shades except burgundy, bottle green, black as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm ( twelve millimetre ) thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm ( three point three kilogram per square metre) including pointings in white cement mixed with pigment of matching shade complete in pattern finish approved by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 57 | Providing and laying 18 mm (Eighteen millimetre) thick Polished Granite stone slab (Jet Black, Cherry Red, Elite Brown, Cat Eye colour) in flooring,steps with three grooves (Single Slab), risers Single slab), kitchen shelves in required design and patterns, in linear as well as curvilinear portions of the building all complete including nozing and moulding as per the architectural drawings with over 20 mm (Twenty millimetre) (average) thick base of cement mortar 1:4 (One cement : four coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etcetera all complete as specified and as directed by the Engineer-in-Charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 58 | Structural steel work riveted, bolted or welded in built up sections, (TATA/ SAIL/ Apollo/ JSW Make/ JAI BHARAT ) in trusses and framed work, grating, frames, guard bar, ladder, railings, brackets, gates and similar works all complete upto all floor level including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 59 | Providing and fixing Precoated Galvanised Iron Profile Sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) of TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percent) total coated thickness with zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred seventy seven in two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen) microns. Sheet should have protective guard film of 25 ( twenty five) microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 ( twelve) metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size 5.5x 55 mm ( five point five into fifty five millimetre) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required upto all floor level/height including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 60 | Providing and fixing Ridges plain 500 - 600mm ( five hundred to six hundred millimetre) precoated galvanised steel sheet roofing accessories TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % (Plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square metre as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 61 | Providing and fixing Crimpt curves precoated galvanised steel sheet roofing accessories TATA/SAIL/JSW Make 0.50 mm ( zero point five zero millimetre) + 0.05 % (Plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty) grams per square as per IS: 277, in 240 ( two hundred forty) mpa steel grade, 5-7 ( five to seven) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 62 | Providing and fixing Flashings/ Aprons Upto 600 mm ( six hundred millimetre) precoated galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm (Plus zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 63 | Providing and fixing Gutter Upto 600 mm ( six hundred millimetre) over all girth precoated galvanised steel sheet roofing accessories of TATA/SAIL/JSW Make 0.50 mm (Plus zero point five zero millimetre) + 0.05 % ( Plus zero point zero five percent) total coated thickness, Zinc coating 120 ( one hundred twenty ) grams per sqm as per IS: 277, in 240 (two hundred forty ) mpa steel grade, 5-7 ( five to seven ) microns epoxy primer on both side of the sheet and polyester top coat 15-18 ( fifteen to eighteen ) microns using self drilling/ self tapping screws complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 64 | Providing and fixing mild steel tube of TATA/ SAIL/ Apollo/ JSW Make hand rail of approved size by welding etcetra to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer using structure steel etcetra as required complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 65 | Providing and fixing Single socketed pipes 110mm ( one hundred ten millimetre) dia of Supreme/Fenolax/Vectus make on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm ( ten millimetre) gap for thermal expansion complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 66 | 15 mm ( fifteen millimetre) cement plaster on rough sides of single or half brick wall with mix 1:6 ( one cement : six coarse sand) upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 67 | 20 mm (twenty millimetre) cement plaster of mix 1:6 ( one cement : six coarse sand) in pattren finish as per approved drawing and as per directions of Engineer-in-charge upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 68 | 20 mm (twenty millimetre) cement plaster of mix 1:4 ( one cement : four coarse sand) upto all floor level including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 69 | Providing and applying white Cement Based Putty of average thickness 1 mm ( one millimetre) of approved brand and manufacturer ( J K White/ Birla White ) over the plastered wall surface to prepare the surface even and smooth complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 70 | Finishing walls with 100% (Hundred percent) Premium acrylic emulsion paint having VOC less than 50 gm/litre (Fifty gram per litre) and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 sqm (One point forty three litre per ten square metre) Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. (Zero point nine zero litre per ten square metre) (ASIAN/NEROLAC/ICI-DULUX) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 71 | Painting wood work with Deluxe Multi Surface Paint of required shade with Two or more coat applied @ 0.90 ltr/10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @0.75 ltr/10 sqm (at the rate of zero point seven five litre per ten square metre) (ASAIN/NEROLAC/ICI-DULUX ) of approved brand and manufacture complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 72 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm (at the rate of zero point nine zero litre per ten square metre) over an under coat of primer applied @ 0.80 ltr/ 10 sqm (at the rate of zero point eight zero litre per ten square metre) of approved brand and manufacture ( ASAIN/NEROLAC/ICI-DULUX ) complete upto all floor level including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 73 | Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 110mm (One hundred ten millimetre) dia PVC pipe of Finolex/ Supreme make having pressure not less than 4.00 Kg/Cm² (four kilogramme per square centimetre) extending through the full width of the structure with slope of 1(V):20(H) (one vertical : twenty horizontal) towards drawing face complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 74 | Making plinth protection 50mm ( fifty millimetre) thick of cement concrete 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm ( twenty millimetre) nominal size) over 75mm( seventy five millimetre) thick bed of dry brick ballast 40 mm ( forty millimetre) nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling and dressing and finishing the top smooth including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 75 | Providing and laying 23 cm (twenty three centimetre) dia half round (to level or slopes) and joining with stiff mixture of cement mortor in the proportion of 1:1 (one cement : one sand) salt glazed stone ware pipes grade \\"A\\" including testing of pipes and joints complete.including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 76 | Providing and laying factory made Pre-Polished 80mm (Eighty millimetre) thick cement concrete paver block of M-35 ( M-Thirty five) grade of NTC make with approved colour, design and pattern ( ISI marked) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 77 | Providing and laying factory made 40mm (Forty millimetre) thick cement concrete paver block of M-30 ( M-Thirty) grade with approved colour, design and pattern (of NTC make ISI marked) chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etcetra of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over 50mm thick (fifty millimetre) compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 78 | Brick tile cladding work for wall lining upto all level with special adhesive over 12mm (Twelve millimetre) thick bed of cement mortar 1:3 (One cement : three sand), including pointing in white cement with an admixture of pigment to match the stone shade including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 79 | Supplying and installing Modular Linear rectangular Workspace of size 900mmx600mm (Nine hundred millimetre into six hundred millimetre) with panel based partition of 52mm (Fifty two millimetre) thickness of main panel and 23mm (Twenty three millimetre) side panels and intermediate tiles of metal laminate and fabric of 1200mm (One thousand two hundred millimetre) height as per layout with metal keyboard pull out tray, quote on per seat basis complete as per drawing and direction of Engineer-in-charge including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 80 | Supplying and installing Godrej Cushion Chair of width 43.5cm (Forty three point five centimetre) and depth 56.5 cm (fifty six point five centimetre) (Width of depth of chair to be measured from pedestal) .The seat and back shall be made from seasoned wood and ply wood. The same shall be upholstered with black synthetic leather and polyurethane foam. The dimension of the back side shall be (W) 38.5cm x(H) 27.0 cm (thirty eight point five centimetre into twenty seven centimetre) . The understructure assembly shall be a cantilever type frame made of dia 2.54 ± 0.03 cm x0.2 ±0.016 cm (two point five four plus minus zero point zero three centimetre into zero point two plus minus zero point zero one six centimetre) thick. M.S. E.R. W tube and powercoated(DFT 40-60(forty to sixty) micron), complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 81 | Designing, fabricating, testing, protection, installing and fixing in position semi (grid) unitized system of structural glazing (with open joints) for linear as well as curvilinear portions of the building for all heights and all levels, including:(a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design.(b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm (Four millimetre) thick aluminium composite panel material consisting of 3mm (Three millimetre) thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm (Zero point five millimetre) thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 (Five hundred) based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 (one) and polymer (Service) coating on face # 2(two) as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc.(c) The fastening brackets of Aluminium alloy 6005 (Six thousand five) T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 (Three hundred sixteen) Pins and anchor bolts of approved make in SS 316 (Three hundred sixteen), Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete, as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 82 | WATER SUPPLY AND SANITARY INSTALLATIONProviding and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat (Hindware/Parryware/Cera make) and lid, 10 litre (Ten litre) low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) W.C. pan with ISI marked white solid plastic soft closing seat and lid , conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required as per direction of Engineer-In-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 83 | Providing and fixing Indian Type Water Closet squatting pan (Indian type W.C. pan ) of size 580x440 mm ( five hundred eighty into four hundred forty millimetre) with integral type foot rests of Hindware /Cera (Universal Pan No. 2071) with 100 mm ( one hundred millimetre) sand cast Iron P or S trap, 10 ( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 84 | Providing and fixing Table top wash basin with C.I. brackets, 15 mm (fifteen millimetre) diametre single hole basin mixer of approved quality and make of Jal/Jaquar/Parryware/Hindware) C.P. brass pillar taps, 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever required White Vitreous China Wash basin size 550x400 mm ( five hundred fifty into four hundred millimetre) with a 15 mm ( fifteen millimetre) CP Brass single hole basin mixer of Hindware or Jaquar make (OPAL SERIES) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 85 | Providing and fixing Wall Hung Wash Basin of 560 x 470 x 190mm (Five hundred sixty into four hundred seventy into one hundred ninety millimetre) size (ARS-WHT-39801 of Jaquar make) with 15 mm (fifteen millimetre) diametre single hole Single Lever Basin Mixer without Popup waste with 450mm (four hundred fifty millimetre) Long Braided Hoses of Jaquar (OPP-CHR-15011 BPM), 32 mm (thirty two millimetre) C.P. brass waste of standard pattern ( Hindware or Jaquar), including painting of fittings and brackets, cutting and making good the walls wherever require d including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 86 | Providing and fixing white Vitreous China full pedestal (ARS-WHT-39301 of Jaquar make) for wash basin completely recessed at the back for the reception of pipes and fittings of Hindware/ Jaquar / Cera make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 87 | Providing and fixing CP Brass pillar cock (Long neck) with Aerator 15mm (Fifteen millimetre) dia of Jaquar make(CON-021KN) /Hindware Make, complete including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 88 | Providing and fixing 32 mm (Thirty millimetre) dia P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings (Finolex/Supreme make) flexible pipe complete including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 89 | Providing and fixing 600x450 mm ( six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm ( six millimetre) thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete of (Modi Guard/Atul/Cera ) make , including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 90 | Providing and fixing Stainless Steel towel rail of Jaquar make(ACN-CHR-1111SM) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred millimetre) long including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 91 | Providing and fixing 600x120x5 mm ( six hundred into one hundred twenty into five millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm ( forty millimetre) long screws, rawl plugs etcetera complete including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royalty, malakana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 92 | Providing and fixing CP soap Dish Holder of Jaquar ( ACN-CHR-1131N ) make with concealed fitting arrangements including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 93 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass bib cock of Jaquar (CON-047KN)make, with wall flange approved quality conforming to IS:8931 make of Jaquar/Parryware/Hindware including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 94 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass Stop Cock (concealed) of Jaquar (OPP-CHR-15053 PM)make with wall flange for basin mixer and geyser points of approved quality conforming to IS:8931 including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 95 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm ( forty five centimetre) length 15mm (fifteen millimetre) nominal bore of Cera/ Jaquar/ Finolex /Hindware Make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 96 | Providing and fixing 15mm (Fifteen millimetre) size Ball Valve (brass) of approved quality, High or low pressure, with plastic floats complete of Jindal /Tata /Zoloto/ UNIK make including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 97 | Providing and fixing 15mm (fifteen millimetre) nominal bore brass Ferrule with C.I. mouth cover including boring and taping the main of Tata/Jindal make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 98 | Providing and fixing 20mm (twenty millimetre) nominal bore brass Ferrule with C.I. mouth cover including boring and taping the main of Tata/Jindal make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 99 | Providing and fixing 100 mm ( one hundred milimetre ) dia Chromium Plated Grating of superior quality for floor, gully or nahani trap with hinges including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 100 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm (Five hundred eighty into three hundred eighty into three hundred fifty millimetre) with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Range of three half stall urinals with 10 litre (Ten litre) P.V.C. automatic flushing cistern complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 101 | Providing and fixing Urinal partition with full frosted, gradient frosted or forsted with clear strips 10mm (Ten millimetre) thick with SS bracket complete including entire carriage of material with in all leads, lifts, drawings, technical specifications as per direction by Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 102 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one) metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquare Opal series) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 103 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (one cement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 90x80 cm (ninety into eighty centimetre) and 45 cm (forty five centimetre) deep including C.I. cover with frame (light duty) 455x610 mm (four hundred fifty five into six hundred ten millimetre) internal dimensions, total weight of cover and frame to be not less than 38 kg ( thirty eight kilogram) (weight of cover 23 kg (twenty three kilogram) and weight of frame 15 kg ( fifteen kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 104 | Constructing brick masonry manhole in cement mortar 1:4 ( one cement : four coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (one cement : one point five coarse sand (zone- III) : three graded stone aggregate 20 mm (twenty millimetre) nominal size), foundation concrete 1:4:8 mix (one cement : four coarse sand (zone- III) : eight graded stone aggregate 40 mm (forty millimetre) nominal size), inside plastering 12 mm (twelve millimetre) thick with cement mortar 1:3 (onecement : three coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate 20 mm (twenty millimetre) nominal size) finished with a floating coat of neat cement complete as per standard design including cutting and threading the pipes complete Inside size 120x90 cm (one hundred twenty into ninety centimetre) and 90 cm (ninety centimetre) deep including C.I. cover with frame (medium duty) 500 mm (five hundred millimetre) internal diameter, total weight of cover and frame to be not less than 116 kg (one hundred sixteen kilogram) (weight of cover 58 kg (fifty eight kilogram) and weight of frame 58 kg (fifty eight kilogram) With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 (seven point five) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 105 | Providing and fixing 75mm (seventy five millimetre) dia nominal size soil, waste and vent pipes Centrifugally Cast (spun) iron socketed pipe as per IS: 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 106 | Providing and fixing 100mm (one hundred millimetre) dia nominal size soil, waste and vent pipes Centrifugally Cast (spun) iron socketed pipe as per IS: 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 107 | Providing and fixing 100mm (one hundred millimetre) dia nominal size Bend of required degree of Sand cast iron S&S as per IS : 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 108 | Providing and fixing 75mm (seventy five) dia nominal size Bend of required degree of Sand cast iron S&S as per IS : 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 109 | Providing and fixing 100x100x100mm ( one hundred into one hundred into one hundred millimetre) nominal size Single Equal Plain Junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete of Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 110 | Providing and fixing 75x75x75mm ( Seventy five into Seventy five into Seventy five millimetre) nominal size Single Equal Plain Junction of required degree with access door, insertion rubber washer 3 mm (three millimetre) thick, bolts and nuts complete of Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 111 | Providing and fixing sand cast iron (S&S) pipe as per IS: 3989 100 mm (one hundred millimetre) inlet and 75 mm (seventy five millimetre) Outlet Trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 112 | Providing and fixing100mm (one hundred millimetre) dia nominal size Collar of Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 113 | Providing and fixing75mm (seventy five) dia nominal size Collar of Sand cast iron S&S as per IS - 3989 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government |
| 114 | Providing Lead Caulked Joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 100mm (one hundred millimetre) diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 115 | Providing Lead Caulked Joints to sand cast iron/centrifugally cast (spun) iron pipes and fittings of 75mm (seventy five millimetre) diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 116 | Providing and fixing 15mm (fifteen millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal ( Hisar) / TATA make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 117 | Providing and fixing 20mm (twenty millimetre) nominal size G.I. Pipes complete with G.I. fittings and clamps, including making good the walls etcetra concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Jindal (Hisar) / TATA make including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 118 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank Sintex make Tripple Layers including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 119 | Providing and fixing M.S. Stays and Clamps for sand cast iron/ centrifugally cast (spun) iron pipes of 100mm (one hundred millimetre) diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 120 | Providing and fixing M.S. Stays and Clamps for sand cast iron/ centrifugally cast (spun) iron pipes of 75mm (seventy five millimetre) diameter including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 121 | Providing and fixing Grab bar of stainless steel 450mm (Four hundred fifty millimetre) long (Superior heavy type) fixed with wooden plugs of Jaquar (Continental Series) or its equivalent of Jaquare make (Item Code AHS 1507) including entire carriage of materials within all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 122 | Excavating trenches of required width for pipes, cables, etcetra in all kinds of soil including ordinary rock including excavation for sockets, and dressing of sides, ramming of bottoms, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm (twenty centimetre) in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within all leads for Pipes, cables etcetra for all diametre not exceeding 300 mm (three hundred millimetre) diametre including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 123 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to Haunches of S.W. Pipes of 100mm (one hundred millimetre) dia including bed concrete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 124 | Supplying and fixing Cast Iron Cover without frame for manhole 455x610mm(Four hundred fifty five into six hundred ten millimetres) rectangular C.I. cover (Light duty single seal pattern-I) the weight of cover to be not less than 23kgs(Twenty three kilogramme) including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge and including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 125 | Providing and fixing 110 mm (One hundred ten millimetre) diametre unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes (Finolex/ Supreme) by means of 50x50x50mm (fifty into fifty into fifty) millimetre hard wood plugs, screwed with mild steel screws of required length,including cutting brick work and fixing in cement mortar 1:4 ( one cement: four sand) and making good the wall including entire carriage of material with in all leads and lifts and as per drawings and technical specifications and the direction of Engineer-in-Charge including other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 126 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominal size) up to Haunches of Pipe Line of 110mm (one hundred ten millimetre) dia including bed concrete as per standard design including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 127 | Providing M.S. foot rests including fixing in manholes with 20x20x10cm ( twenty into twenty into ten centimetre) cement concrete blocks 1:3:6 (one cement:three coarse sand : six graded stone aggregate 20mm (twenty millimetre) nominal size as per standard design with 20x20mm (twenty into twenty millimetre square bar including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 128 | ELECTRICAL INSTALLATIONWiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm (One point five square millimetre). FRLS PVC insulated copper conductor single core cable etc as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) (Make of wire : Finolex,Anchor,Polycab,Havells)Make of conduit;- Diplast/BEC/AKG/ ) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Group C |
| 129 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm (One point five square millimetre) FRLS PVC insulatedcopper conductor single core cable in surface/ recessed PVC conduit heavy duty , and earthing the point with 1.5 sq. mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable etc as required(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) (Make of wire : Finolex,Anchor,Polycab,Havells)Make of conduit;- Diplast/BEC/AKG) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 130 | Wiring for twin control light point with 1.5 sq.mm (One point five square millimetre) FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit , 2 (Two) way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq. (One point five square) FRLS PVC insulated copper conductor single core cable etc as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) (Make of wire : Finolex,Anchor,Polycab,Havells)Make of conduit;- Diplast/BEC/AKG) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 131 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed heavy class PVC conduit as required Make:-Finolex,Anchor,Polycab,Havells as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.2 X 1.5 sq. mm + 1 X 1.5 sq. mm (Two into one point five square millimetre Plus 1 (One) into one point five square millimetre) earth wire |
| 132 | 2 X 4 sq. mm + 1 X 4 sq. mm (Two into four square millimetre Plus One into four square millimetre) earth wire |
| 133 | 2 X 10 sq. mm + 1 X 6 sq. mm (Two into ten square millimetre Plus one into six square millimetre) earth wire |
| 134 | 4 X 10 sq. mm + 1 X 6 sq. mm (Four into ten square millimetre Plus one into six square millimetre) earth wire |
| 135 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.Make:-Finolex,Anchor,Polycab,Havells as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 3 x 1.5 sq. mm (Three into one point five square millimetre) |
| 136 | 3 x 4 sq. mm (Three into four square millimetre) |
| 137 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 5/6 amp (five oblique six ampere) Modular switch |
| 138 | 5 (Five) pin 5/6 amp (five oblique six ampere) socket outlet |
| 139 | Telephone socket outlet |
| 140 | Modular blanking plate |
| 141 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 5 (Five) pin 5/6 amp (five oblique six ampere) modular socket outlet and 5/6 amps (Five oblique six ampere) modular switch, connection etc. as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 142 | Supplying and fixing suitable size GI box with modular plate and cover in FRLSont on surface or in recess, including providing and fixing 6 (Six) pin 5/6 (five oblique six) & 15/16 amps (fifteen oblique sixteen amperes) modular socket outlet and 15/16 amps (fifteen oblique sixteen amperes) modular switch, connection etc. as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 143 | Supplying & fixing suitable size GI box wih modular plate and cover in front onsurface or in recess i/c providing and fixing 32 amp (Thirty two ampere) modular socket outlet and 25Amps (twenty five ampere) modular SP MCB, “C” curve including connection, painting etc. as required.(Make of switches: Legrand Lyncus, L&T Entice, Anchor Roma Classic, Panasonic Akina, Crabtree Athena, ABB Adiva, Schneider Electric Clipsal) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 144 | Supplying and fixing Computer board comprising 2 (Two) Nos 5 amp (five ampere) modular switches & Sockets , G.I box 2 (two) module for jack box and G.I Box 6 (six) module for 5 amp (five ampere) switchs and 5 amp (five ampere) sockets comprising sheet cover for each 2 (two) module metal box , one no computer jack (RJ-45)with shutter including connections etc as required.Make :-Anchor (Roma classic ),L&T(Entice),Legrand(Myrius) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 145 | Supplying and fixing 25 mm (Twenty five millimetre) of heavy class atleast 1.6 mm (One point six millimetre) thick PVC conduit along with accessories in surface/recess/ ceiling / wall / floor etc. including cutting the wall and making good the same in case of recessed conduit as required complete with accessories like, Junction boxes, Collars, Bends, flexible metallic conduit etc. for LAN system/ Fire Alarm system/ CCTV system/VRV system etc. Make: Diplast/AKG/ Anchor/ Precision/ BEC as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 146 | 25 mm(Twenty Five Millimetre) |
| 147 | Providing and installation exhaust fan of 300 mm (Three hundred millimetre) metal body l/d in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: Make : (Usha , Orient , Crompton , Havells as approved by Engineer-In-Charge ( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 148 | Providing and installation exhaust fan metal body of 300 mm (Three hundred millimetre) heavy duty in the existing opening,including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: Make : (Usha Aeroclean LD, Orient Air Flow, Crompton Drift Air Plus Metal Anti Dust, Anchor Anmol Deluxe-R, Havells Ventil Air DS Only) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 149 | Supplying and fixing exhaust fan louver shutter for 300 mm (Three hundred millimetre) exhaust fan on the existing wall,painting etc, as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 150 | Supplying and fixing Ding Dong call bell suitable for single phase, 230 V (Two hundred thirty Volts), complete as requiredMake :-Anchor (Roma classic ), L&T(Entice), Legrand(Myrius) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 151 | Providing, Installation, testing and commissioning of BLDC ceiling fan (5 (five) star rating), with socket type 2 (Two) module fan regulator including wiring the down rods of standard length (up to 30 cm (Thirty centimetre)) with 16/0.20 mm (Sixteen oblique zero point two zero millimetre) twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: (Make: Usha Technix BLDC ISI, Orient Echotech Prime, Havells Efficiencia, Bajaj Energos 26, Anchor Ecobreez Urban 3 (Three) Blades, Crompton Energion HS Groove Hyperjet only)as approved by Engineer-In-Charge ( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Ceiling Fan 1200 mm (One thousand two hundred millimetre) sweep |
| 152 | SITC of Recess/Surface following Watt LED Down Lighter : System Wattage (W) ±2 (two) W, PF @ Full load & Rated Voltage, ≥0.95 and THD (Ithd%) @ Full load & Rated Voltage : ≤10% and System Lumens (±10%) : 1800 for 15 (Fifteen) watt and 1440 for 12 (Twelve) watt , Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 (Two hundred forty) VAC, Input Voltage Range (V)(AC) : 140-270, Driver type (external/internal) : External, IP rating : IP40(Housing),IP20(Driver), Housing : Aluminium pressure Die Cast Housing, Mounting Arrangement : Surface/Recess Mount, Diffuser/Optical material : HET Diffuser, CRI : 80, LED life : 50,000 Hrs, Surge Protection (kV)(Internal) : 3KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471..complete with all accessories, connections, testing and commissioning etc as:Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.12W (Twelve Watts) |
| 153 | 15W (Fifteen Watts) |
| 154 | SITC of 30 (Thirty) Watt Recess Mounted 595X595 MM (Five hundred ninety five into five hundred ninety five millimetre), System Wattage (W) : 30±10%, PF @ Full load & Rated Voltage : ≥0.95, THD (Ithd%) @ Full load & Rated Voltage : ≤10%, System Lumens (±10%) : 4500, Driver Efficiency (%) @ Full load & Rated Voltage : ≥85%, Ambient Temperature (°C) : 0-45°C, Operating Frequency (Hz) : 50±3%, Rated Voltage (V)(AC) : 240 V (Two hundred forty volts), Input Voltage Range (V)(AC) : 140 270(Normal)/198-264(DALI), Driver type (external/internal) : External. IP40, Housing : Housing-CRCA & Frame in Aluminum. Mounting Arrangement : Recess Mount, Diffuser/Optical material : HET Diffuser, CRI : 80, LED life : 50000 Hrs, Color Temperature (K) : 4000K/5700K, Surge Protection (kV)(Internal) : 4 KV, LED CCT Binning : ANSI Bin C.78.377A, LED Photo biological safety report : IEC 62471. complete with all accessories, connections, testing and commissioning etc as:Make:- WIPRO/PHILIPS/LT as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 155 | Providing and fixing of following type surface mounted Luminaire LED batten 40 (forty) watts ,having high Quality design aluminium extruded decorative end caps and it should be compatible with specification i.e. P.F >.9,THD<10% and luminius flux 3250 Lumens per watt 130 (One hundred thirty) ,CRI> 80 (Eighty) suitable for input voltage: AC 220-240 V (Two hundred twenty to two hundred forty volts), 50/60Hz, Burning hours >50000@L70 complete with all accessories, connections, testing and commissioning etc as:Make:- Philips/wipro/ LT as approved by Engineer-in-Charge( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 156 | Providing and fixing of IP65 Bulkhead led fixture 10 (ten) W +/- 1 W Wall Mounted with minimum system lumen efficacy of 100 lm/W with Pressure Die Cast Aluminum housing, Polycarbonate Opal Diffuser and P.F.>0.95 with THD<10% ,CRI 80.The LED shall be tested with LM80-08 standard with Useful life of 50000 Hrs at L70 .The LEDs used in the luminaire shall have CCT of ANSI Bin 5700 K only with CRI of minimum 80.The Input voltage range shall be 140V to 280V, 50/60 HZ complete with all accessories, including connections, testing and commissioning etc.as required complete in all respects. Make:- Philips/wipro/ LT as approved by Engineer-in-Charge( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 157 | Providing and fixing of lightning conductor finial, made of 20 mm (Twenty millimetre) outer dia. 1.2 mtr (One point two metre) long copper tube, having single prong at top, with 85 mm (Eight five millimetre) dia 3 mm (Three millimetre) thick copper base plate including holes etc. complete as required. Make:- True power , Earth plus, Ashloka as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 158 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm (Six hundred into six hundred into three millimetre) thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre (Two point seven metre) long etc. with charcoal/ coke and salt as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 159 | Providing and fixing 4.00 mm (Four millimetre) dia copper wire on surface or in recess for loop earthing as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 160 | Supplying and laying 20 mm X 3 mm (Twenty into three millimetre) copper strip as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 (Two) sets of brass nut bolt & spring washer spaced at 50mm (Fifty millimetre) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 161 | Supplying and fixing copper strip bus-bars suitable for 200 Amp (Two hundred ampere). 415 (Four hundred fifteen) volts capacity 4 (four) No. each of cross-sectional area (16mmx3.17mm) (Sixteen into three point seventeen millimetre) ,in the existing enclosure with all accessories including connections etc. as required: including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 162 | Supplying and fixing copper strip bus-bars suitable for 300 Amp (three hundred ampere). 415 (four hundred fifteen) volts capacity 4 (four) No. each of cross-sectional area (31.75mmx6.35mm) (Thirty one point seven five into six point three five millimetre),in the existing enclosure with all accessories including connections etc. as required:- including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 163 | Supplying and fixing copper strip bus-bars suitable for 1000 Amp (One thousand ampere). 415 (four hundred fifteen) volts capacity 4 (four) No. each of cross-sectional area (50.80mmx9.50mm) (Fifty point eighty into nine point five zero millimetre),in the existing enclosure with all accessories including connections etc. as required:- as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 164 | Supplying and erection of following depth Indoor cubical panel, as per the standards IEC 61439-1&2 as tested assembly, IP 42 fabricated CRCA sheet steel of 2 mm (Two millimetre) thick for frame work and covers, 3 mm (three millimetre) thick for gland plates i/c cleaning& finishing complete with 7 (seven) tank process powder coating in approved shade,, DMC/ SMC bus bar supports,bottom base channel of MS section not lessthan100 mmx 50 mmx 5 mm (one hundred into fifty into five millimetre) thick, fabrication shall be done in transportable sections, form of separation shall be form 4b with metallic separation only,the same shall be erected in the 1:2:4 (one cement : two sand : four graded stone aggregate) cement concrete plat-form of suitable dimensions 15 cm high from ground level, thick.The size of control wiring in cubical panel FR-LSH 1.5 sqmm.The panel should be approved /Tested from the CPRI lab. make of switcgear L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 300 mm (Three hundred millimetre) Deep |
| 165 | 750 mm (Seven hundred fifty millimetre) Deep |
| 166 | Supplying Installaion Testing & commissiong of Following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as requiredMake L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 32-63 AMP (Thirty two to sixty three ampere) 18 KA (eighteen kiloampere) |
| 167 | 160-200 AMP (One hundred sixty to two hundred ampere) 25 KA (twenty five kiloampere) |
| 168 | 250AMP (two hundred fifty ampere) 36 KA (thirty six kiloampere) |
| 169 | Supplying and fixing 4 (four) pole microprocessor ACB 1000 AMP (One thousand ampere) , breaking capacity 50 kA (fifty kiloampere) confirm to IS/IEC 60947-2 and IEC 60947-2 electrically operated draw outversion, high short time fault with standing capacity Icu=Ics-low for 1 (One) second for total selectivity, High mechnical and elecrtrical operting life protected through micro processor releases with on load test button inbuildt thermal memory, protection releases confirm to EMI/EMC standards, data communication and power management, breaker status and control thourgh MODBUS protocol (UN-CO module)incuding termunal spreader on both side complete in all respect. Make:- L&T Legrand, Hager, ABB or its equivalent as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 170 | Supplying Installaion Testing & commissiong of indicator set RY&B in existing cubicle panel board with 3 (Three) Nos Kit kat (LED type) to shown the three indicating in the existing pannel complete etc as required.Make L&T, Schneider,ABB as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 171 | Supplying Installaion Testing & commissiong of Multi Function Meter in existing cubical panel board with 3 (Three) Nos. Cast Resin CTs and MCBs including V, A ,F ,P.F, KW, KVA, RUN HOUR,KWH,(EV AND DG), OLD ENERGY, SELECTATBLE KWH-KVH parameters connections , testing, commissioning etc. as requiredMake:- L&T, Legrand, Hager, ABB as approved by Er-In-Charge (five year warranty) Make L&T, Schneider,ABB as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 172 | Providing and fixing 1000 AMP (One thousand ampere) , four pole, 415 (four hundred fifteen) volts, On-Load change over switch in open execution , front handle operation, including making connections, etc. as required. Make:- L&T ,Legrand,Hager as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 173 | Supplying and fixing of Segregated tripple pole and neutral 8 (Eight) ways Double Door surface/ recess mounting, 7 (seven) Segment 415 (four hundred fifteen) volts, TPN MCB distribution board of sheet steel, dust protected, dulypowder painted, with provision to mount FP-MCB incomer, DP MCB/RCCB sub-incomer ineach phase and SP MCBs as outgoing (but without MCB ’s and incomer),complete with tinned copper din-bar, wire-set, neutral link, earth bar, detachablegland plate, cable interconnections, including earthing etc. as required:- Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 174 | Supplying Installaion Testing & commissiong of following way, single pole and neutral,sheet steel, MCB distribution board, 240 V (two hundred forty volts), on surface/recess, complete with tinned copper bus bar, neutral busbar, earth bar,din bar,interconnections, powder paintedincluding earthing etc. as required. (But withoutMCB/RCCB/Isolator)Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. MCBDB 16 (sixteen) WAY Double Door |
| 175 | Supplying Installaion Testing & commissiong of 5 amps (five ampere) to 32 amps (thirty two ampere) rating, 240/415 volts (two hundred forty/four hundred fifteen volts), 10 kA (ten kiloampere), “C” curve,miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.)Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Single Pole |
| 176 | Supplying Installaion Testing & commissiong of 40/50/63 amps (Forty/fifty/sixty three ampere) rating, 10 KA (ten kiloampere) breaking capacity, 240 (two hundred forty) volts, 'C' curves, miniature circuit breaker of pole Double pole in the existing MCB DB complete with connections etc. as required:-Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 177 | Supplying Installaion Testing & commissiong of 63 amps rating, 240/415 volts (two hundred forty/four hundred fifteen), 10 kA (ten kiloampere), “C” curve,miniature circuit breaker suitable for inductive load of four poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.:-Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 178 | Supplying Installaion Testing & commissiong of following rating, double pole, (single phase and neutral), 240 (two hundred forty) volts,10 kA (ten kiloampere) breaking capacity residual current circuit breaker (RCCB), having a sensitivity current 30 (thirty) milli amperes in the existing MCB DB complete with connections, testing and commissioning etc. as required.-Make L&T, Schneider,ABB as approved by Engineer-in -charge.( Five year warranty) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.40 AMP (Forty ampere) |
| 179 | 63 AMP (Sixty three ampere) |
| 180 | Supplying installation testing & comminssiong of 20 (twenty) Watt Solar Light as per MNRE with MPPT Controller 12V (twelve volts) DC, Semi Integrated Light with Inbuilt battery-1 (One) Nos b) Solar Module 120W (one hundred twenty watts) BIS approved -1 (One) Nos c) LFP Battery 48Ah (forty eight ampere hours) 12.8V (twelve point eight volts) BIS Approved-1 (One) Nos d) 5Mtr (five metre) HDG Octagonal Pole with all accessories for Solar, OD-70/130mm (seventy/one hundred thirty millimetre) Thick-3mm (three millimetre), Base plate-220x220x12mm (two hundred twenty into two hundred twenty into twelve millimetre), J-Bolts M16x450mm (sixteen into four hundred fifty millimetre) -1 (One) Set complete in all respect as required.Warranty-5Yrs (five years) for Complete System BIS approved make as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 181 | Providing, laying and fixing of one No. aluminium conductor,of following size confirms to IS 7098 (part-1) PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts (one thousand one hundred volts) grade on surface including lugs & gland complete in Conections testing & commissiong etcetera as required Make: Finolex,Anchor,Polycab,Havells as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Armoured cable 16 sqmm (Sixteen square millimetre) (4 (four core) |
| 182 | Armoured cable 300 sqmm (Three hundred square millimetre) (3.5 (three point five core) |
| 183 | Supply, installation, testing and commissioning of G.I. floor raceway of mention below sizes 1/3 (one oblique three) compartments including all necessary civil works .Make Legrand/ MK as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 75mmx38mmx1.6mm (Seventy five into thirty eight into one point six millimetre) (GI) |
| 184 | 150mmx25mmx1.6mm (One hundred fifty into twenty five into one point six millimetre) (GI) |
| 185 | Supply, installation, testing and commissioning of G.I junction box size 150 x 150 x 65 - 90 mm (One hundred fifty into one hundred fifty into sixty five to ninety millimetre) for duct entry 1/3 compartments junction box completely base and cover plate including all necessary civil works.Make Legrand/ MK as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 186 | Supplying and installing following size of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5% (seventeen point five percent), in convenient sections, joined withconnectors, suspended from the ceiling with M.S. suspenders including bolts & nuts, painting suspenders etc as required.Make Legrand/ MK as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 150 mm (One hundred fifty millimetre) width X 50 mm (Fifty millimetre) depth X 1.6 mm (One point six millimetre) thickness |
| 187 | 300 mm (Three hundred millimetre) width X 50 mm (Fifty millimetre) depth X 1.6 mm (One point six millimetre) thickness |
| 188 | Providing and commissioning of self supporting stool type ladder heavy duty made out of aluminium section of 115 mm (One hundred fifteen millimetre) ribbed nonislip steps with large plateform of size 482x380 mm (Four hundred eigty two into three hundred eighty millimetre) ,150mm (One hundred fifty millimetre) brake type tyre castors for easy movement ,handrails 1 meter railing height from plateform for climbing comfort,guard rail 1 meter railing height from plate form complete in all respect as required. Required size 8ft as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 189 | LAN SYSTEMSupplying, installation, testing and commissioning of Core Switch 24 (twenty four)-port 1G/10G SFP+, 4 (four)-port 40G/100G QSFP28 Ports.Non-Blocking architecture. 1.280 Tbps Switching Capacity, & forwording rate 952Mbps, for Higher switching functionalaty. MAC Address Table Up to 32K entries or More. Min 4K static VLAN groups & Min 4K VIDs. Packet Buffer Memory 4 (four) MB. STP/MSTP/RSTP & ERPS for less than 50 Millisecond convergence (G.8032 v1/v2) Protocol Root Guard & Loop Guard. IEEE 802.3ad Link Aggregation with LACP. 802.1p Quality Service with 8 queues per port. Port Mirroring, Flow Mirroring, RSPAN mirroring, L2 protocol tunneling, Loopback Detection (LBD). support IPv4 8K & IPv6 4K Routes. IPv6: PBR, Static Routing, OSPFv3, RIPv1/v2, BFD), BGPv4, IPv6 ND. IEEE 802.1ab LLDP & LLDP-MED. Hardware based forwarding for IPv4 & IPv6. DHCP-Snooping, Dynamic ARP Inspection & IP source guard. VRRP for IPV4 & IPV6. IGMPv1/v2/v3 for Layer 3 Multicast, L3 multicasting features IGMP, MLD, PIM-DM, SM. MAC & 802.1 X based Login must be available, 802.1X NAP. MAC Address based Lockdown & Limited Learning, L2/L3/L4 IP based, Source port, destination port, MAC based, Time based. AAA using RADIUS must be available, Identity-driven Policy (VLAN/ACL/QoS) Assignment. 802.3ah, 802.1ag CFM & Y.1731 OAM. Ingress & Egress ACL, Time-based ACL. Queue Handling with Strict Priority Queue, WRR, WRED, WFQ, SPQ, DRR. QoS based on 802.1p Priority Queues, MAC address, IP address, DSCP, VLAN, TCP/UDP port. SNMP V2c & V3, & RMONv1 & RMONv2. managem+C1`ent (On https) through NMS or Full featured CLI, TELNET Access. VXLAN, 802.1AX Link Aggregation, & 4K VLAN. Netflow/IPFIX/sflow for flow exports. Operating temperature: 0°C to 45 °C & Relative Humidity: 10% to 95%. IEC-60950/CSA-60950/EN-60950/UL-60950 standard for safety requirements information technology equipment. EMI Certificates FCC/VCCI/CE & Safety Certifications cUL/UL. IEC 62368-1:2018, EN IEC 62368-1:2020/A11, EN 55032:2015+ A1:2020, EN 55035:2017. Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent Indian Certificate). OEM/Product must be on Trusted Telecom Portal Department Telecommunication, Government India. Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 190 | Supplying, installation, testing and commissioning of 48 (forty eight) x 10 (ten)/100(One hundred)/1000 (One thousand) BASE-T Interface (inbuilt 6kV surge Protection, 2 x 10G Copper 4 & 10G SFP+ Uplink, Internal/External Redundant Power supply Support, Physical stack up to 8 units, 80 Gbps per device physical stacking bandwidth, Switching capacity 216 Gbps or non-blocking architecture. 64 Bytes packet forwarding rate 161 Mpps. RAM/DRAM: 2GB & Flash/SSD : 256MB, Packet Buffer Size 2 MB, MAC Address Table 16K, Support IPv4 & IPv6: OSPFv2/v3, VRRP v2/v3, IEEE 802.3ah, IEEE 802.1ag, ITU-T Y.1731, ERPS, PBR, LLDP/LLDP-MED, UDLD/DULD, SPQ, WRR, Strict + WRR, WDRR, WRED, GVRP, BPDU Filtering, Root Guard, Loop Guard, Loopback Detection, HOL Blocking Prevention, RSPAN/SPAN, L2PT, 802.3ah Ethernet Link OAM, UDLD or equivalent, Dying Gasp, 802.1ag Connectivity Fault, Management CFM, Y.1731 OAM, 4 x Internal Smart fans, Operating Temp 0 to 50 °C, Storage Temperature -20 to 70°C, Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, 2017), ISO 27001, IEC-62443-4-1:2018 or Equivalent. OEM/Product must be on Trusted Telecom Portal Department Telecommunication, Government India.Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 191 | Supplying, installation, testing and commissioning of Layer 2 (two) Switches: 24 (twenty four) Ports 10/100/1000 Mbps PoE + 4 Ports 10G SFP+ Smart Managed Switch, 370W from day 1, Support 802.3af/at), Switching Capacity 128 Gbps, MAC Address Table 16K, Packet Forwarding Rate, 95.24 Mpps, Flash Memory 64 MB, DRAM Size 256 MB DDR3, IGMP v1/v2/v3 Snooping & MLD snooping v1/v2, 802.3x Flow Control, HOL Blocking Prevention, LLDP/ LLDP-MED, 802.1D, 802.1W, 802.1s, 802.1Q, 802.1p QOS, SPQ, WRR, WDRR, Bandwidth Control, Static routing, IPv6 Neighbor Discovery (ND), ACL Max. 768 rules shared by IPv4, MAC, & IPv6, Traffic segmentation, ARP Spoofing Prevention, ARP Inspection, DHCP Snooping, MAC authentication, SSH v2, TLS v.1.2, DoS attack prevention, 802.1X Port-based Access Control, Port Security, RADIUS/TACACS+, MD5 authentication, GUI, Full CLI, Telnet Server, TFTP Client, MDI/MDIX, SNMP v1/v2c/v3. Internal/External 6 kV surge protection on all RJ-45 access ports, Operating Temperature -5 to 50°C, Storage Temperature -20 to 70°C, Operating Humidity 0% to 95% relative humidity, Certifications: UL, CE, FCC, RoHS, MTCTE/TEC-ER (as notified vide Indian Telegraph (Amendment) Rules, 2017), ISO 27001, IEC-62443-4-1:2018 or Equivalent. OEM/Product must be on Trusted Telecom Portal Department Telecommunication, Government India. Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 192 | Supplying, installation, testing and commissioning of 10 (Ten) G SFP Module : 10 (Ten) GBase-LR Single-Mode Fiber Optic SFP Module, Supports up to 10 km (ten kilometre). Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 193 | Supply Installation testing & commissioning 1 (one) meter 10 (ten) G 30 (Thirty) AWG Passive SFP+ to SFP+ Direct Attach Cable with 10G speed, IEEE 802.3ae 10GBASE-LR Ethernet, Data Rate: 10 Gbps Gigabit Ethernet, Maximum Cable Distance Coverage: Up to 10 kilometers VMA Loss to Crosstalk Ratio (VCR): Minimum 32.5 dB, Minimum Cable Bend Radius: 23.5 mm (0.93 inches), Cable Characteristic Impedance: 100 Ohms, Voltage: 30 V AC, Current: 0.5 A, Operating Temperature: 0°C to 70°C, Storage Temperature: -40°C to 85°C. Certifications: SFP MSA (Multi-Source Agreement), SFF-8431, EIA 364, UL 94 OEM Should have Certificate for Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent). complete in all respect with entire satisfication Engineer-in-charge. OEM/Product must be on Trusted Telecom Portal Department Telecommunication, Government India. Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 194 | Supplying, installation, testing and commissioning of Access point IEEE 802.11ax with a data rate of 1800 (One thousand eight hundred) Mbps, configured in a 2x2 + 2x2 setup. Additionally, it should feature high output power for both 2.4GHz & 5GHz frequencies, & support Power over Ethernet (PoE) 802.3at standards. IEEE 802.11ax for 1200 Mbps on the 5GHz band & 574 Mbps on the 2.4GHz band. Support 1024QAM on both of 2.4GHz & 5GHZ. The operation of be within the 2.42.5GHz & 5.155.85GHz frequency bands. Enhanced security WPA/WPA2/WPA3 for both Personal & Enterprise use, RADIUS client integration, & Cipher negotiation. Power Jack, Factory Reset Button, one RJ45 console port, & LAN ports supporting Power over Ethernet (PoE). comprehensive network management capabilities, including HTTP, HTTPS, Software Controller, Hardware Controller, SNMP support, Telnet, Email Notification, & Secure SSH Telnet. Extensible Authentication Protocols (EAP), including EAP, EAP-TLS, EAP-TTLS/MSCHAPv2, PEAPv0/MSCHAPv2, PEAPv1/EAP-GTC, & EAP-SIM. four dual-band internal antennas, with specifications of 3.2 dBi for 2.4 GHz & 4.3 dBi for 5 GHz. Additionally, it should have a maximum output power of 23 dBm for 2.4 GHz & 26 dBm for 5 GHz. 802.1x, RADIUS Server, POP3 & LDAP. Multi-Tenant & Role-Based Administration. Wireless Resource Airtime Fairness, Connect Limit, Aging Out, ACL RSSI & Band Steering, Wireless MAC ACL, & WLAN Partition. ARP Spoofing Prevention, Wireless Intrusion Protection, & Bandwidth Optimization. Captive Portal with industry-standard authentication. MAC-based access filtering & WLAN partitioning, Wi-Fi Multimedia Quality of Service (QoS), Traffic Control Uplink & Downlink limit. Ethernet traffic statistics & WLAN traffic statistic. Load balancing to optimize performance between Access Points. FCC, CE Certifications. Certificate for Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent). Product Should Approved from TEC under Mandatory Testing & Certification of Telecom Equipment as notified vide Indian Telegraph (Amendment) Rules, 2017. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 195 | Supply, Installation, Testing and Commissioning of Enterprise Wireless controller with Centralized Management: Support for managing multiple Access Points (APs) behind NAT via HTTPS agents. Comprehensive AP Information: Display status, IP/MAC addresses, channel, network, firmware version, and model details and other relevant details. Client Information: Detailed data on wireless clients, including IP/MAC addresses, authentication type, channel, and SSID. Site and Network Configuration: Ability to create and manage logical sites and networks based on physical locations. Bandwidth Optimization: Configure bandwidth settings per client, SSID, and for different standards (11a/b/g/n). SSL Certificate Upload: Capability to upload SSL certificates for APs. Captive Portal Features: Support for various authentication methods, payment gateway integration, and customizable pages. Scalability: Manage up to 1000 (one thousand) APs or More without licensing fees. Wireless LAN Management: Features including AP grouping, multi-tenancy, visualized topology, and comprehensive reporting. Multiple SSIDs/VLANs: Support for multiple SSIDs with VLAN tagging and captive portal integration. Advanced Features: Band steering, airtime fairness, auto RF management, and client access control. Rate Limiting: Bandwidth control for guest and hotspot portals. RF Management: Support for auto channel selection, output power control, and self-healing. Web Interface: Easy management via a web-based user interface (HTTPS). Update Scheduling: Capability to schedule firmware and configuration updates. OEM Compliance: All components (switches, APs, controller) must be from the same Certificate for Industrial Cyber Security Capability (Like - IEC-62443-4-1:2018 or Equivalent). Product Should Approved from TEC under Mandatory Testing & Certification of Telecom Equipment as notified vide Indian Telegraph (Amendment) Rules, 2017. OEM/Product must be on Trusted Telecom Portal of Department of Telecommunication, Government of India. Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 196 | Supplying, Installation, Testing and commissioning of CAT 6 (Six) UTP Cable Cable. Category 6 (six) Unshielded Twisted 4 (four) pair compliant with ANSI/TIA/EIA-568-C.2 & ISO/IEC 11801 Class E. 1000BASE-T (1Gigabit Ethernet) standard, Category 6 should operate on bandwidth up to 250MHz (two hundred fifty Megahertz) as per standard & tested up to 500MHz (Five hundred Megahertz). ETL Verified & UL Listed. Conductor 23 (twenty three) AWG solid bare copper. Conductor Insulation material HDPE & Insulation diameter 1.0 - 1.45 mm (One to one point four five millimetre) nominal. Twisted in pairs with four pairs contained in LSZH jacket / sheath. Four twisted pairs separated by internal X shaped, full separator. Half shall not be accepted. Sheath LSZH. Cable outer diameter 6.1 mm (six point one millimetre) nominal. Cable weight 13.6Kg/Box (Thirteen point six kilogramme per box). Conductor Resistance: ≤ 9.38Ω/100m. Mutual Capacitance: ˂ 5.6nF/100m. Resistance Unbalance: 5% Max. Delay Skew: < 45nS. Capacitance unbalance: 330pF/100m. Nominal velocity of propagation of cable 69%. Each meter printed with sequential Length Counter. Temperature Range -20° to +70°C (Twenty degree to Plus seventy degree celcius). Need to submit transmission characteristics report per 100 (one hundred) meter. The report at least includes Insertion Loss, RL, NEXT & PSNEXT data. OEM for the cable Box & all copper Accessories from same OEM. OEM International certification for the ISO 45001, ISO 9001, ISO 14001, & ISO 14064-1. Make: D-Link R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 197 | Supply, Installation, Testing and Commissioning of Patch Panel 24 (Twenty four) Port 1 (One) U Size loaded with 24 port RJ-45 IO. Mounts in standard 19 (Nineteen) inch racks. Cable manager for improvement management. Patch panel suitable for Category 6 (six) keystone. SPCC & Black Color. Rear support bar material SPCC & Black Color. RJ-45 jack housing PBT + Glass fiber UL94V-O & Contact brackets PBT + Glass fiber UL94V-O. Rj-45 contact material phosphor bronze with nickel plated & plug contact area finish with 50 micro-inches Gold plated. Contact resistance maximum 20 miliohm. Operating Temperature -10° Celsius to 60° Celsius. Life of RJ-45 Jack 750 cycles minimum @ 500 VDC. ETL Verified / UL Listed. ISO 9001, ISO 45001, ISO 9001, ISO 14001 & ISO 14064-1. Make: - Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 198 | Supply, Installation, Testing and Commissioning of Patch Panel 48 (forty eight) Port 1U/2U Size loaded with 24 (twenty four) port RJ-45 IO. Mounts in standard 19 (Nineteen) inch racks. Cable manager for improvement management. Patch panel suitable for Category 6 (six) keystone. SPCC & Black Color. Rear support bar material SPCC & Black Color. RJ-45 jack housing PBT + Glass fiber UL94V-O & Contact brackets PBT + Glass fiber UL94V-O. Rj-45 contact material phosphor bronze with nickel plated & plug contact area finish with 50 (fifty) micro-inches Gold plated. Contact resistance maximum 20 miliohm. Operating Temperature -10° Celsius to 60° (Sixty degree) Celsius. Life of RJ-45 Jack 750 cycles minimum @ 500 VDC. ETL Verified / UL Listed. ISO 9001, ISO 45001, ISO 9001, ISO 14001 & ISO 14064-1. Make: - D-Link Juniper/ Cisco/ Extreme as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 199 | Supply, Installation, Testing and Commissioning of Patch Cord 1 Mtr (One metre) . TIA/EIA 568C.2 standard. 24 AWG, multi-strands. conductor metal made from bare copper. Insulation material high density polyethylene. patch cord jacket LSZH. Conductor size: 24 -26 AWG stranded bare copper, Jacket: FR-PVC, Mechanical Characteristics – Plug, Operating life: Minimum 750 insertion cycles, Contact blade: Copper Alloy, Contact plating: 03Mµ” Gold, Electrical Characteristics – Plug, Dielectric withstanding Voltage: 1000VDC or 700 VAC, Insulation resistance: >500 (Five hundred)MegaOhms @ 1000V DC/min (One thousand volts direct current per minute), Operating temperature: - 20 (twenty) Degree C to 75 (seventy five) Degree C, Clear Polycoarbonate for RJ-45 And Clear PVC for Boot Material, factory molded Boot, RJ-45 standards: ISO/IEC 60603-7-4 and FCC 47 part 68, UL Application : PC UL94-V-0, UL Listed & ETL Listed Certified, Patch cord plug gold plated. Contact blade of plug made from copper / alloy. Insertion cycle 750 (seven hundred fifty) times. Temperature range should support from 10° (ten degree) Celsius to 60° (sixty degree) Celsius. Vertical flame propagation IEC 60332-1-2, Acid Gas Emission Test – IEC 60754 - 1 & 2 (one & two), Smoke Density Test – IEC 61034-2. ISO 9001, ISO 45001, ISO 9001, ISO 14001 & ISO 14064-1. OEM for the cable Box and all copper Accessories from same OEM. Make: D-Link R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 200 | Supply, Installation, Testing and Commissioning of Patch Cord 2 Mtr. (Two metre) TIA/EIA 568C.2 standard. 24 AWG, multi-strands. conductor metal made from bare copper. Insulation material high density polyethylene. patch cord jacket LSZH. Conductor size: 24 -26 AWG stranded bare copper, Jacket: FR-PVC, Mechanical Characteristics – Plug, Operating life: Minimum 750 insertion cycles, Contact blade: Copper Alloy, Contact plating: 03Mµ” Gold, Electrical Characteristics – Plug, Dielectric withstanding Voltage: 1000VDC or 700 VAC, Insulation resistance: >500 MegaOhms @ 1000V DC/min, Operating temperature: - 20 Degree C to 75 Degree C, Clear Polycoarbonate for RJ-45 And Clear PVC for Boot Material, factory molded Boot, RJ-45 standards: ISO/IEC 60603-7-4 and FCC 47 part 68, UL Application : PC UL94-V-0, UL Listed & ETL Listed Certified, Patch cord plug gold plated. Contact blade of plug made from copper / alloy. Insertion cycle 750 times. Temperature range should support from 10° Celsius to 60° Celsius. Vertical flame propagation IEC 60332-1-2, Acid Gas Emission Test – IEC 60754 - 1 & 2, Smoke Density Test – IEC 61034-2. ISO 9001, ISO 45001, ISO 9001, ISO 14001 & ISO 14064-1. OEM for the cable Box and all copper Accessories from same OEM. Make: R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 201 | Supply, Installation, Testing and Commissioning of Cat 6 (six) Information Outlet - Jack for User end. Category 6 keystone jacks housing made from PC, UL 94V-2 material. RJ45 Jack contact material phosphor bronze with nickel plated. Finished with 50 micro-inch gold plated on plug contact area. IDC Housing made from PC, UL 94V-2. Terminal material Phosphor bronze with tin plated. IDC CAP and material of IDC Cap PC, UL 94V-2. Current rating 1.5A. Operating Temperature -10° Celsius to 60° Celsius. Life of Jack 750 cycles minimum (ISO/IEC 11801 / IEC 60603-7-4). Category 6 Unshielded Twisted 4 pair shall be ETL Verified / UL Listed. ISO 9001, ISO 45001, ISO 27001, ISO 9001, ISO 14001 & ISO 14064-1. Make: R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 202 | Supply, Installation, Testing and Commissioning of Face Plate. Face plate material: ABS with white color. Make: R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 203 | Supply, Installation, Testing and Commissioning of Gang Box 3x3 (Three into three). Make: R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 204 | Supply, Installation, Testing and Commissioning of O. F.Cable 06F Outdoor - Armoured Unitube SM - HDPE Sheath (OS1). Fiber type 9/125 / G.652D & Refractive Index should be 1.4670/1.4675. Standard ISO 11801, IEC 60793-1/60794-1-2 & ITU-T-REC G.652D. Telecordia : GR-20 Core, ISO : 11801. Jacket Thickness 1.8 + 0.2 mm, Outer diameter should be 9 ± 0.3 mm. 3000N/100mm Crush Load (IEC 60794-1-2-E3). Bend Radius (IEC 60794-1-2-E11 & E6) Short Term 20D in mm & Long Term 10D in mm. Pulling Tension: Short Term 2000N, Long term 1000N pulling tension (IEC 60794-1-2-E1). Mode field diameter 9.2um ±0.5, Clad Diameter 125um ±1.0. Dispersion At 1285 - 1330nm should be <=3.5 ps/nm.km. Dispersion At 1550nm should be <=18.0 ps/nm.km. PMD value <=0.2 (ps/km). Maximum Attenuation at 1310nm should be <=0.36 dB/km. Maximum Attenuation at 1550nm should be <=0.22 dB/km. Cabled Cutoff Wavelength should be <=1260 nm. Operating Temperature should be – 20 deg C to +60 deg C. All Passive of the same make. (Copper, Fiber & Racks) Make: R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 205 | Supply and fixing following port Rack Mount loaded 12 (Twelve) Port LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. Make: - D-Link Juniper/ Cisco/ Extreme/ Rittal/ ABB/ APC as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 206 | Supply and fixing following port Rack Mount loaded 24 (Twenty four) Port LIU with pigtail, Front-mounted cable saddles for jumper management, suitable to manage both splices and terminations, Pre-assembled shelves in multiple configurations, Rubber fiber slotted bracket built-in, metal splice shelf to protect the fibers, 2 fiber spools built-in for 900μm tight buffered fiber storing, Capable of storing up to 3 meters of 900μm tight buffered fiber per adapter, Removable front and rear covers for better access to interior of LIU, Should be Single / Multi mode LC Type fully loaded. Accessory kit consists of cable ties, mounting ear screws, and spiral wrap tube etc complete as required. Make: - D-Link/Juniper/ Cisco/ Extreme/ Rittal/ ABB/ APC as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 207 | Supply, Installation, Testing and Commissioning of PATCH CORD LC-LC SM DUPLEX LENGTH- 3m (three metre), 9/125µm Single mode G652D, Duplex Type, (EIA/TIA, IEC, ANSI). Physical Contact (PC) connectors return loss > 45 dB. Ultra Physical Contact (UPC) connectors return loss > 50 dB. Angled Physical Contact (APC) connectors return loss > 60 dB. Repeatability < 0.2dB 1000 times Mating Cycle. Working Temperature –10°C ~+70°C, Storage Temperature –20°C ~+70°C. All Passive of the same make. (Copper, Fiber & Racks). Make: R&M/D-Link/Molex/Commscope as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 208 | Supplying and fixing 42 (forty two) U Rack with 6(six) inch Castor wheels and front brake Floor Standing Rack with Main Frame Pillar of 1.6mm (One point six millimetre) CRCA Sheet with removable side panels, L- Shape adjustable Vertical Mounting Rail of 2mm with 'U'Marking completely knocked-down condition (CKD) Shape, fitted with 4 number cooling fans, minimum 8nos two line cable entry/exit provision at top and bottom with rubber protection, Front door 5mm Toughened Glass with MS frame or MS perforated with lock, Rear MS vented or perforated door, Powder coated Color- RAL- 7035 or black, complied with UL & RoHS, 2 x 6 sockets 16A power distribution units, 3 numbers closed cable organizer, Hardware mounting screws packet of 20 x 1 number, etc. complete as required. Make: - D-Link/ Juniper/ Cisco/ Extreme/ Rittal/ ABB/ APC as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 209 | Supply, Installation, Testing and Commissioning of 25mm (Twenty five millimetre) HDPE Pipe with all Accessories. Make: TeleRex, Dutron, Vekay Plast, Duroline as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 210 | ENTRY/EXIT ACCESS CONTROLSITC of Fingerprint and EM Prox Card based Single Door Access Controller with Ethernet, PoE and Wi-Fi; Door Lock, Door Sense, Exit Reader, Exit Switch, RS-485/RS-232, Wiegand IN/OUT; IP65 Rated Controller with Built-in Readers; 50,000 Users, 25,000 (1:N) and 1,00,000 (1:1) Fingerprint Templates and 5,00,000 Events; Tri-color LED and Buzzer; 12VDC Power Supply through Adaptor. Make - Invixium/ Matrix/Idemia as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 211 | SITC of Access Control Panel with 800 (Eight hundred) MHz Cortex A8 (Eight) Processor, 512MB RAM, 256MB Flash and 32GB SD Card; Flexible Operation Modes: Standalone mode with built-in web server; Supports up to 255 Matrix door controllers or IO controllers; 25,000 Users Capacity and 500,000 Events logs; Auxiliary Input/Output, Ethernet, RS-485, USB, Wi-Fi Module (IEEE 802.11 b/g/n), Bluetooth Interface; Secured Socket Layer Certified; 3rd-Party Integration & Control via APIs, including door control actions, access logic integration, and access event data exchange. Make - Invixium/ Matrix/ Idemia as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 212 | SITC of Magnetic Lock with Required Brackets Type for single/ double leaf door: 280KG (Two hundred eighty kilogramme) Magnetic lock; Aluminum alloy shell + iron plate; Holding force: 280KG/600lbs; Working Voltage: DC12V; Working Current: 110mA; Humidity: 0 to 95%; Working Temperature: -10 to 55 Celsius degree; Working mode: power-on to lock, power-off to unlock; Work for single door; Bracket Support: L, ZL, and U. Make- Any Reputed Standard Brand approved from competent authority as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 213 | SITC of Touch Stainless Steel Exit Button with Operation Mode OFF-NONE-ON; Current Rating 12 (Twelve) Amps; Operating Voltage 12 (Tweleve) Volts; Contact Type Normally Closed; Connector Type Crimp; Switch Type Push Button; Terminal Screw; Circuit Type 1-way; Mounting Type Surface Mount; Actuator Type Push Button; Number of Positions 1; Control Method Sensor; Control Type sensor; Compatible Devices Magnetic locks. Make - Any Reputed Standard Brand approved from competent authority as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 214 | IP/CCTV SURVEILANCE SYSTEMSITC of 5MP (five megapixel) IR Dome Camera (2.8mm Fixed Lens) with 30 Mtr (Thirty metre) IR Distance and In-built Microphone. Image Sensor: 5 MP Dome camera 1/2.8\\" Progressive Scan, CMOS Sensor or Better Supported resolutions: 2593 X 1944,2592 X 1520,2048 X 1536, 1920 X 1080,720p,D1,2CIF,VGA,CIF Video Compression: H.264, H.265, MJPEG or Higher Video Standard: PAL/NTSC Number of Streaming profiles support: Profile 1: 2592 x 1944 @30fps (H.264/H.265) Profile 2: D1 @30fps (H.265/H.264) Profile 3: 2048x1536 @8fps (MJPEG) or D1/VGA@15fps(H.264/H.265) Profile 4: 1920 x 1080 @30fps (H.265/ H.264/ MJPEG) Bitrate: 128kbps-16Mbps or Better Adaptive streaming: Should Support Unicasting/ Multicasting: Support of Unicasting and Musticasting shall be provided Shutter speed: 1/15s-1/100000s or Better Minimum Illumination: Colour - 0.01 Lux @( F1.2 AGC ON) Black & white - 0 Lux or Better Signal to Noise Ratio (SNR): 70dB or better Lens focal length: 2.8 mm Lens HFOV - 107.6°, VFOV - 57.°, DFOV - 127.62° Built In IR irradiance upto: Min 30mtrs or better Zoom: 16x Digital Zoom Audio Input: IN-built Microphone Audio Output: 1 Output port Audio Compression: G.726 ,G.711 a-law and u-law Day/Night Camera Switching: Should Support Network Failure recording: In case of Network failure, the Camera shall start recording on NAS or SD Card, which can be retrived back when the network connectivity restores ( ANR) Edge Storage: 512 GB Onboard storage support or better Network Connectivity: 10Base-T/100BaseTX Ethernet (RJ-45) Supported Network Protocols: TCP/IP, UDP, HTTP, HTTPS, DHCP, DNS, DynDNS, DDNS, RTP, RTCP, RTSP, PPPOE, SMTP, NTP, SNMP, FTP, TLS/SSL, SFTP, ICMP, IGMPv2 & v3, ARP, 802.1x, IPv4, IPv6, QoS Layer 3, DSCP, CIFS, SSH, UPnP, Bonjour Data Encryption: All data, including sensitive data, is encrypted with AES and RSA IP Address Filtering: Should Support HTTPs Streaming: Should Support Edge Data Encryption: Should Support Network Authencation: 802.1x Network authentication Video Content Analytics (VCA): Detection:Motion Detection, View Tamper Detection, Trip/No Trip Detection, Object Intrusion/ Zone Intrusion IP Conflict, Network Disconnect,Storage Full, Alert Support: IP conflict, Network disconnect, storage full, time triggered, Manual Trigger. Back light Compensation (BLC): Should Support Wide Dynamic Range: 120 dB or Better Image Enhancement: Saturation,Contrast, Sharpness, Brightness, Auto Exposure, Gamma , White balance, Intelligent Defog Noise Reduction: 2 DNR, 3 DNR Power: POE (802.3af/at), 12 V 2A or Better Operating Temperature: ~30°C- +60°C or better Operating Humidity: 95% or less Ingress Protection: IP67 Impact protection: Yes, IK10 Rated Metal Housing MAC Address: The MAC address of the camera shall be registered in the name of the OEM, and it must be registered in India. ONVIF Compliance: S,G & T, The IPCamera make and model shall appear on the ONVIF Conformant products List Regulatory Approvals/ Certifications To be attach: FCC, BIS, CE , RoHs,NDAA, Cyber Security Certified by STQC to meet the essential requirement issued by MeitY IP camera & NVR: Should be same Make Plug and Play: The IPCAM shall get connected to the destined NVR/VMS when plugged in the network without adding from NVR or VMS Compliance: OEM should comply with all specifications and deviations, if any, must be clearly highlighted. Make: BOSCH/MATRIX/AXIS/INFINOVA/Securus as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 215 | SITC of 5MP (five megapixel) IR Bullet Camera (4.0mm Fixed Lens) with 30 Mtr (thirty metre) IR Distance and 1/1 Audio I/O Ports. Image Sensor: 5 MP Bullet camera 1/2.8\\" Progressive Scan, CMOS Sensor or Better Supported resolutions: 2593 X 1944,2592 X 1520,2048 X 1536, 1920 X 1080,720p,D1,2CIF,VGA,CIF Video Compression: H.264, H.265, MJPEG or Higher Video Standard: PAL/NTSC Number of Streaming profiles support: Profile 1: 2592 x 1944 @30fps (H.264/H.265) Profile 2: D1 @30fps (H.265/H.264) Profile 3: 2048x1536 @8fps (MJPEG) or D1/VGA@15fps(H.264/H.265) Profile 4: 1920 x 1080 @30fps (H.265/ H.264/ MJPEG) Bitrate: 128kbps-16Mbps or Better Adaptive streaming: Should Support Unicasting/ Multicasting: Support of Unicasting and Musticasting shall be provided Shutter speed: 1/15s-1/100000s or Better Minimum Illumination: Colour - 0.01 Lux @( F1.2 AGC ON) Black & white - 0 Lux or Better Signal to Noise Ratio (SNR): 70dB or better Lens focal length: 4.0 mm Lens HFOV - 87.6°, VFOV- 46.4°, DFOV - 104.5° Built In IR irradiance upto: Min 30mtrs or better Zoom : 16x Digital Zoom Audio Input: 1 Input port Audio Output: 1 Output port Audio Compression: G.726 ,G.711 a-law and u-law Day/Night Camera Switching: Should Support Network Failure recording: In case of Network failure, the Camera shall start recording on NAS or SD Card, which can be retrived back when the network connectivity restores ( ANR) Edge Storage: 512 GB Onboard storage support or better Network Connectivity: 10Base-T/100BaseTX Ethernet (RJ-45) Supported Network Protocols: TCP/IP, UDP, HTTP, HTTPS, DHCP, DNS, DynDNS, DDNS, RTP, RTCP, RTSP, PPPOE, SMTP, NTP, SNMP, FTP, TLS/SSL, SFTP, ICMP, IGMPv2 & v3, ARP, 802.1x, IPv4, IPv6, QoS Layer 3, DSCP, CIFS, SSH, UPnP, Bonjour Data Encryption: All data, including sensitive data, is encrypted with AES and RSA IP Address Filtering: Should Support HTTPs Streaming: Should Support Edge Data Encryption: Should Support Network Authencation: 802.1x Network authentication Video Content Analytics (VCA): Detection:Motion Detection, View Tamper Detection, Trip/No Trip Detection, Object Intrusion/ Zone Intrusion IP Conflict, Network Disconnect,Storage Full Alert Support: IP conflict, Network disconnect, storage full, time triggered, Manual Trigger. Back light Compensation (BLC): Should Support Wide Dynamic Range : 120 dB or Better Image Enhancement: Saturation,Contrast, Sharpness, Brightness, Auto Exposure, Gamma , White balance, Intelligent Defog Noise Reduction: 2 DNR, 3 DNR Power: POE (802.3af/at), 12 V 2A or Better Operating Temperature: ~30°C- +60°C or better Operating Humidity: 95% or less Ingress Protection: IP67 Impact protection: Yes, IK10 Rated Metal Housing MAC Address: The MAC address of the camera shall be registered in the name of the OEM, and it must be registered in India. ONVIF Compliance: S,G & T, The IPCamera make and model shall appear on the ONVIF Conformant products List Regulatory Approvals/ Certifications To be attach: FCC, BIS, CE , RoHs,NDAA, Cyber Security Certified by STQC to meet the essential requirement issued by MeitY IP camera & NVR : Should be same Make Plug and Play: The IPCAM shall get connected to the destined NVR/VMS when plugged in the network without adding from NVR or VMS Compliance: OEM should comply with all specifications and deviations, if any, must be clearly highlighted. Make: BOSCH/MATRIX/AXIS/INFINOVA/Securus/Norden/ Vicon as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 216 | SITC of 96 (Ninety six) Channel NVR with 4K Support and 8 (eight) HDD Slots. 96 IP Channel Inputs; 4K HDMI; 1/1 Audio I/O and 2/1 Alarm I/O 12MP, 8MP, 5MP, 4MP, 3MP, 2MP, 720p, D1 and CIF Recording Resolution 4x 4K/ 10x 3MP/16x 1080p Local Decoding 8 SATA HDD Support (Maximum 18TB Capacity per Slot) Save Storage Space with Adaptive Recording and Camera-wise Recording Retention SMS & Email Notification, Video Pop-up and Alarms Throughput- 1024 Mbps - 512Mbps Uplink, 512Mbps Downlink, ONVIF and Major Camera Brands Support NAS Support: 2 NAS (CIFS, NFS) Mobile Viewer Application Should Support Calling from Mobile App Feature Where a Mobile Number Can be Added Per Camera in the Device and The User Can Directly Call a Concerned Person by Just One Click on Camera View from Mobile(without any SIM card in NVR) The device should be capable of acting as a Master device and should be able to Add,View,Playback and Configure at least 20 other connected slave devices (NVRs) camera's from the Local View via HDMI, without need of any Server/workstation. BIS, FCC Compliance: OEM should comply with all specifications and deviations, if any, must be clearly highlighted. Make: BOSCH/MATRIX/AXIS/INFINOVA/Securus/Norden/ Vicon as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 217 | Supplying, Installation, Testing and Commissioning following capacity Serveillance grade Hard Disk with upto 256MB/s Transfer Rate, 256 (Two hundred fifty six) MB Cache, 7200 RPM Disk Speed, 3.5 (three point five) inch form factor, SATA Interface, BSMI, ICES-003/NNB-003, CE, FCC, KC, Maghreb, RCM, UKCA, VCCI, CB-Scheme, TUV, UL any of the Certifications. Make: WD/SAMSUNG/TOSHIBA/SEAGATE as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 218 | SITC of 65 (Sixty five) Inch Commercial Grade 4K LED Tv for viewing all cameras at once. Make: LG/SAMSUNG/SONY as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 219 | SITC of Endpoint Security and Management solution offers robust protection against known and zero-day malware, ransomware, exploits, spyware, phishing, and advanced persistent threats (APTs) across multiple attack vectors including web, email, network, and devices, featuring a Zero-Trust Application Service that blocks all unauthorized applications and maps suspicious behaviors to the MITRE ATT&CK framework. Positioned as a Leader in the GigaOm Radar Report for Endpoint Detection and Response, it provides cloud-based continuous monitoring, behavioral blocking, automated analysis, and disinfection, alongside critical response capabilities like centralized quarantine, threat hunting, and real-time computer isolation directly from its centralized cloud-based console. The platform ensures data compliance and retrospective attack investigation by retaining detection data for at least one year and includes built-in endpoint security management, attack surface reduction, dynamic filtering, user activity auditing, and specialized add-ons like Patch Management, Full Encryption, a SIEMFeeder, and an Advanced Reporting Tool. Designed for high availability and backed by ISO27001 certifications and 24x7 OEM Support, the solution accommodates modern and legacy infrastructures by integrating a native proxy agent for isolated systems and comprehensively supporting Windows (including legacy XP/2003 and ARM), macOS (including ARM), Linux, Android, iOS, and persistent or non-persistent virtual desktop environments (VDI) like VMware, Citrix, and Microsoft Virtual Servers. Make: Sentinel/ ESET Protect/ Sophos/ WatchGuard as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 220 | SITC of Unified Threat Management (UTM) device mandate a robust Hardware Platform featuring no built-in mechanical moving parts, a Hardened OS-based firewall, flash-based configuration storage with NO built-in HDD, a Management Interface with 1x 1000 Base TX (10/100/1000Mbps) RJ45 connector, Network Interfaces comprising 8x 1000 Base TX (10/100/1000Mbps) RJ45 connectors, I/O Interfaces with 2 USB 3.0 and 1 RJ45 RS232 console port, and Memory consisting of 16 GB DDR4/Flash paired with a 256 GB Solid State HDD. The device must support IP Address Assignment via Static, PPPoE Client, and DHCP Client protocols, alongside the ability to support an internal DHCP Server and act as a DHCP Relay Agent. In terms of Performance, the firewall must support a minimum of 48.9 Gbps Firewall (UDP) throughput, 6.7 Gbps UTM (fullscan) throughput, 16.3 GBPS VPN (UDP) throughput, 4.7 GBPS VPN IMIX throughput, 12.3 Gbps GAV throughput, 7.9 Gbps IPS (fullscan) throughput, 15,000,000 bidirectional concurrent sessions, and a minimum of 254,000 new sessions per second. Authentication servers and processes must support user authentication services such as Active Directory, LDAP, RADIUS, Secure ID, Digital certificates, Local user group authentications, a Single-Sign-On Feature, and the ability to support Terminal Services client / Citrix Client. For Networking, the firewall must support port independence, Link Failover (Active-Active and Active-Passive), operation in Routing mode or Bridge (Transparent) mode, automatic WAN failover as well as load sharing for outbound traffic, VPN Failover, Server Load Balancing, VLAN Tagging (IEEE 802.1Q), Policy-Based Routing, Dynamic Routing (RIP v1 & v2, OSPF & BGP), NAT functionality including dynamic and static NAT translations, Port Forwarding, and traffic shaping / QOS options. It must be compatible with Centralized Management and support Active-Active as well as Active-Passive redundancy and HA Clustering that achieves simple and minimal downtime during upgrades, with options to create ALIASES and Customized Aliases based on User/Group, Host IP/IP Range & Interface to identify groups of Hosts or networks with one Unique Name. The integrated VPN function must support full Encryption and standards such as DES, 3DES, AES (including AES 128, 192 & 256), MD5 and SHA-1 authentication, Diffie-Hellman Group 1, Group 2, Group 5, Group 14, Group 15, Group 19, and Group 20, the Internet Key Exchange (IKE) algorithm, support for IPSec, PPTP, L2TP & SSL VPN, 5,000 Site-to-Site Tunnels (BOVPN), and a minimum of 10,000 Mobile VPN tunnels (IPSec, SSL, L2TP). Security capabilities require a Reputation-based Cloud Security feature, protection against Denial of Service (DoS) attacks such as ping of death, syn flood, UDP bomb, Land attack, Smurf, Fraggle and ICMP unreachable, Auto Blocking of Source IP address based on triggers, real-time spam detection, and proactive virus detection technology to block new outbreaks immediately. For SMTP traffic, it must support Tagging, Drop, Deny, and Quarantine actions, alongside blacklisting / whitelisting, a Language-independent anti-spam solution, Advance Recurring Pattern Detection anti-spam technology relying on RBL and scoring, and quarantine features. Web URL filtering must include a 100+ category-based database (referred Online or stored on a Local Management Station) with options to define specific URLs to be Allowed/Blocked and a password override feature for users to allow blocked websites. Furthermore, the IPS and AV signature databases must update on an hourly basis, utilizing a built-in Signature IPS engine on the same unit, Server/Client Quota-based Distributed Denial of Service Prevention, and options to exclude certain hosts' traffic from IPS scanning for particular signatures. Gateway AV must support real-time detection of viruses and malicious code for HTTP, HTTPS, FTP, SMTP, POP3, and SIP with configurable policy options, while Application control covers Web 2.0 applications, ensuring that the unit does not use inhouse security services for AV, IPS, and Antispam. Administration is facilitated via a Dedicated Application-based GUI management program, with options for Remote management through WEBUI, CLI & Secure Management Software, featuring administrative TCP/IP ports set to numbers other than TCP 80 and TCP 443 to prevent brute-force attacks. It must restrict access to a single administrative login to preserve integrity and deny consecutive login attempts, support role-based administration, configurable connection timeouts, a real-time network connection map, drag-and-drop VPN configuration, a comprehensive reporting suite at no additional cost, and offline policy files configuration and modification. Administrative features also include sending SNMP traps to Network Management Servers (NMS) in response to System failures, the ability to make a full backup of the entire flash disk as an image file, the ability to make/edit configuration files offline without connecting to the operating security device, options to Change the Default Web UI Port, and options to schedule rebooting. Monitoring, Logging, and Reporting include a Live Traffic Monitor, Real-time reporting with a Drill Down Feature, a System Services Status Monitor, an Authenticated User List Monitor, VPN Connections Monitoring, Protocol-based Traffic Watch, and an IP/Host/User-based Traffic Watch with an option to Block Source/Destination from the monitoring tool itself. Finally, the system supports PDF Audit Reporting, Remote Logging, Remote Reporting, Remote Monitoring, an Encrypted Log Channel, provision to generate automatic alerts via mails / syslog, sending SNMP traps to NMS in response to System failures, Multi-Appliance Log Aggregation, and a logging and reporting solution provided at no extra cost without needing any license renewal, including 1 day of data (reports) retention provided at no extra cost on the cloud. Make: Watchgaurd/ Palalto/ Checkpoint/ Cisco/ASA as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 221 | Supplying and installaton of 100 mm width X 50 mm depth X 1.6 mm (One hundred millimetre width into fifty millimetre depth into one point six millimetre) thickness of perforated painted with powder coating M.S. cable trays with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with two numbers MS/GI Suspenders i/c base of suitable size MS/GI angle, bolts & nuts, painting suspenders, fastener etc as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 222 | FIRE ALARM SYSTEMsupply, installation, testing, and commissioning of an approved make, microprocessor-based, atleast five loop, networkable fire alarm control panel with a distributed loop architecture, supporting up to 1100 addressable points and expandable from 1 to 6 (One to six) loops. Each loop shall accommodate a minimum of 125 (One hundred twenty five) detectors and 125 other devices (excluding 10% spare), with the capability to support all 1110 points as sensors. The panel shall feature a minimum 160-character LCD display, a 1000-event history log, and support peer-to-peer networking for up to 17 nodes with a total capacity of 18,870 addressable points. It shall include a 240V AC power supply, automatic battery charger, and 24V sealed lead-acid batteries rated for 24 hours of normal operation and 30 minutes in alarm mode, with a charging capacity of 55AH. The system must provide multiple outputs with a minimum 6 Amp current for third-party integration, at least 6 NAC circuits for notification/AUX outputs, and include all necessary licensed software and hardware for programming. The panel shall comply with UL 864 (10th Edition), UL 2572 (2nd Edition), and be FM Approved. Make: Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 223 | Supplying, installing, testing and commissioning approved make Network Repeater Panel points on distributed architecture network.. The NRP shall show communication from all Fire Aarm panels connected in the same network. The NRP shall work on 24Vdc . UL Listed. Make: Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 224 | Supplying, installing, testing and commissioning approved make Addressable Photoelectric Smoke Detector with sensitivity range of 0.5 to 4.0% obs/ft. The detector shall have group decision technology for faster response & avoid false alarms. The detector shall have twin bi-colour LED for 360 deg viewing. Addressing shall be with user friendly rotary decimal switches.The detector shall work on coperative mode to avoid false alarm.The detector shall comply UL268, 7th Edition guidelines. (Above False Ceiling). Make: Honeywell / Notifier/Morley/Simplex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 225 | Supplying, installing, testing and commissioning approved make Addressable Rate of Rise Heat Detector rated at 8.3 deg C/min. The detector shall have twin bi-colour LED for 360 (Three hundred sixty) degree viewing. Addressing shall be with user friendly rotary decimal switches. Detector shall comply UL521 guideline. Make:Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 226 | Supplying, installing, testing and commissioning approved make Response indicator for all detectors located above false ceiling. Make: Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 227 | Supplying, installing, testing and commissioning approved make Addressable Pull Type Station (Single Action). The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. The device shall comply UL approval. Make: Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 228 | Supplying, installing, testing and commissioning approved make Addressable Control Module for Sounders / Strobes / Sounder cum Strobes. The control module shall provide supervised NAC output rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make:Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 229 | Supplying, installing, testing and commissioning approved make Addressable Relay Module for AHU, Access Control, Lifts, Staircase Pressurization, Fire Suppression & other Third Party Outputs. The relay module shall provide contact rated at 24v DC, 2A. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make: Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 230 | Supplying, installing, testing and commissioning approved make Addressable Monitor Module for Sprinklers, Panic Bars & other Third Party Inputs. The monitor module shall monitor potential free contacts. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Addressing shall be with user friendly rotary decimal switches. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make:Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 231 | Supplying, installing, testing and commissioning approved make Isolator Module for Isolating short / dewired / loose circuits with automatic resetting arrangement. Isolator Base can also be proposed, however in that case needs to be considered with each detector & module. The device shall have an LED which shall blink in normal state & get steady on activation to monitor the heath status of the device. Module shall be supplied with mounting plate from OEM for ease of installation & maintenance. Make: Honeywell / Notifier/Morley/Simplex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 232 | Supplying, installing, testing and commissioning approved make Intelligent Addressable Power Supply Unit: 24V DC for additional power of Loop cards & Notification Appliances. The PSU shall be UL Listed, supervised by Fire Panel & of the same make as Fire Alarm System. Make:Honeywell / Notifier/Morley/ Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 233 | Supplying, installing, testing and commissioning of Sounder cum Strobe with LED Lighting Technology rated at 88 dBA for Audible annunciation and 185cd flashing at 1 Hz for visual indication. The device shall be UL Listed & FM Approved. Make: Honeywell / Notifier/Morley/Simplex/ Seimens as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 234 | Supplying, installing, testing and commissioning of 2 C (Two core) X 1.5 Sq mm (one point five square millimetre) multi stranded twisted unshielded FRLS Copper cable. Make: as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Finolex,Anchor,Polycab,Havells as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 235 | SITC of 16 (sixteen) Zone, Voice Alarm controller panel with PTT mic with built-in USB, MP3, AM/FM player is 16 speaker circuit digital voice alarm controller which includes a digital signal processor, Built-in Media Player with USB reader (MP3/WAV/FLAC), BluetoothV5.0, FM Radio functions,SD CARD and control, fire alarm input, loudspeaker output connection terminals and audio source connection ports for auxiliary inputs. Provides 16 broadcast zone output function, the peak power of each zone is 400W, and the total power of the all 16 zones is 2000W as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 236 | SITC of 16 (sixteen) Zone Remote Paging Microphone with zone selection RJ45 (3 inputs) | Audio signal analog 100Hz to 15 Khz | Two way Digital Communication between call station and controller - RS485 | Communication distance 300 m as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 237 | SITC of 1000W (One thousand watts) Power Amplifier with following features:- Rated output wattage - 1000W, Amplifier output 100V, 70V and 4-16 Ohms transformer isolated speaker outputs,1000W,70V(7.4Ω) 100V(15.1Ω), Supply input <1 V unbalanced, XLR and phone jack Frequency response 80Hz~20KHz ( ± 3 dB, S/N Ratio> >90dB Damping Factor 2000, Power Consumption 500W, Speaker output short circuit protection. Approved Makes : Bosch / Honeywell / System Sensor/ Ateis as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 238 | SITC of 6W (six watts) Ceiling Speaker with max SPL1M/1W 96dB . Frequency response of 80Hz-20KHz with a dispersion angle of 160 degree The speaker should have tappings at 6W/3W/1.5W. Approved Makes : Bosch / Honeywell / System Sensor/ Ateis as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 239 | SITC of 6W (six watts) Wall mount with max SPL1M/1W 96dB . Frequency response of 160Hz-20KHz. The speaker shoud have tappings at 6W/3W. Approved Makes : Bosch / Honeywell / System Sensor/ Ateis as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 240 | SITC of 15W (fifteen watts) Horn Speaker (IP66) with max SPL1M/1W 110dB . Frequency response of 500Hz-5KHz with a dispersion angle of 140 degree. The speaker shoud have tappings at 15W/7.5W. Approved Makes : Bosch / Honeywell / Ateis as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 241 | Supplying, installing, testing and commissioning of Fire Retardant PVC insulated copper conductor cable in the existing surface / recessed steel conduit of following pairs, cores and size including connections and interconnections etc. 2 C X 1.5 Sq mm (two core into one point five square millimetre) multi stranded twisted unshielded FRLS Copper cable. Make: Finolex,Anchor,Polycab,Havells. NOC/Approval from concrened Fire Officer/ Fire Department is to be obtained as per H.P. Fire regulation & byelawas.NOC/Approval from concrened Fire Officer/ Fire Department is to be obtained as per H.P. Fire regulation & byelawas.The installation will be accepted by the department only after receiving clearance from Chief Fire Officer for the work executed by the contractor under the agreement as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 242 | FIRE FIGHTING SYSTEMProviding, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 1239/Class -II of IS: 3589 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :.Make. TATA/JINDAL HISSAR/SAIL/ Zenith as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 25 mm (Twenty five millimetre) |
| 243 | 32 mm (Thirty five millimetre) |
| 244 | 50 mm (Fifty millimetre) |
| 245 | 65 mm (Sixty five millimetre) |
| 246 | 80 mm (Eighty millimetre) |
| 247 | 100 mm (One hundred millimetre) |
| 248 | 150 mm (One hundred fifty millimetre) |
| 249 | 200 mm (Two hundred millimetre) (wall thickness 6.3 mm) (Six point three millimetre) |
| 250 | Proviidng ,Installing and commissioning of Frist Aid hose reel with MS Construstion spray painted in post office red (swinging type hose reel drum) Conforming tp IS 884 with upto date amendments complete with 30 mtr (Thirty metre) long and 20 mm (Twenty millimetre) nominal internal dia heavy duty r water hose thermoplastic (Teitile reinforced )type II, 20 mm (Twenty millimetre) dia globe valve stop cock. Tetrminating with G.M. coupling & nozzle of 6mm outlet with shut off valve complete as required.)Make. Minimax,Safex,Ceasfire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 251 | Supplying and fixing Single headed internal/external yard hydrant valve with 1 No. 63 mm (Sixty three millimetre) dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required :(Type 'A')Make. Minimax,Safex,Ceasfire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 252 | Supplying and fixing SS 63 mm (sixty three millimetre) dia, 15 m (fifteen metre) long RRL hose pipe with 63 mm (sixty three millimetre) dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required :Make. Minimax,Safex,Ceasfire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 253 | Supplying & fixing SS 63 mm (Sixty three millimetre) dia Stainless Steel short branch pipe with 20 mm (Twenty millimetre) nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as required:.Make. Minimax,Safex,Ceasfire as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 254 | Providing &fixing fibre glass reinforced Fire Hose Cabinet ( 30\\"x24\\"x10\\") (Thirty inch into twenty four inch into ten inch) out door type, made out of sheet having glazed door with 6mm (Six millimetre) thick clear Glass including necessary Locking arrangement with allen Key, powder coating with Post Office Red Paint and for Hoseing 2 (Two) Nos .RRL Hose Pipe, 1 No Branch pipe including grounding and suitable inscripting the words\\" Hose Cabinet\\" on the Box complete as requried. Make. Minimax,Safex,Ceasfire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 255 | Supplying and fixing of fire brigade connection of cast iron body with SS male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required: FourWay - 150 mm (One hundred fifty millimetre) dia M.S. Pipe as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 256 | Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 (one point six) rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required :.Make. Zoloto, Sant,Leader, Kartar as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 80 mm (Eighty millimetre) Dia |
| 257 | 100 mm (One hundred millimetre) Dia |
| 258 | 150 mm (One hundred fifty millimetre) Dia |
| 259 | Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :complete in all respect.Make. Zoloto, Sant,Leader, Kartar as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 80 mm (Eighty millimetre) Dia |
| 260 | 100 mm (One hundred millimetre) Dia |
| 261 | 150 mm (One hundred fifty millimetre) Dia |
| 262 | supply, Installing, testing and commissioning of 100mm (One hundred millimetre) dia type pressure gauge gate valve with all accessories as requried. Make. H Guru, Bell, Fiebig, System sensor, Emerald, Waaree, Bell as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 263 | SITC Pressure switchs for Main, Jockey, and staind by Diesel pumps including necessary wiring up to control panel and Ballvalve. complete in all respect. Make: Indfoss /System Sensor/ Danfoss/ DELTA CONTROL as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 264 | supply, Installing, testing and commissioning of 25mm (Twenty five millimetre) dia gate valve with all accessories as requried.Make. Zoloto, Sant,Leader, Kartar as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 265 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm (six millimetre) thick MS plate, 250mm (Two hundred fifty millimetre) in diameter and 1.2 m (One point two metre) in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm (twenty five millimetre) dia valve, pressure gauge with Stainless Steel stop cock complete with all accessories as required as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 266 | (a) Supplying, installation, testing and commissioning of Electric driven Main Fire Pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 (four hundred fifteen) volts, 3 (three) phase 50 (fifty) Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e)Suitable cement concrete foundation duly plastered with anti vibration pads.2280 lpm at 70 m Head Make. Kirloskar,ABB,Seimens, Grundfoss, Mather & platt as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 267 | (a) Supplying, installation, testing and commissioning of electric driven pressurisation pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) (b) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. (d) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.180 lpm at 70 m Head. Make. Kirloskar,ABB,Seimens, Grundfoss, Mather & platt as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 268 | Supplying installation,testing and commissioning of Diesel Engine Driven 2 (two) hp Fire pump suitable for aotumatic operation and consisting of following :- (a) Supplying, installation, testing and commissioning of diesel engine driven main fire pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) (b) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required. (d) M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads.2280 lpm at 70 m Head Make. Kirloskar,ABB,Seimens, Grundfoss, Mather & platt as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 269 | Fabrication, supplying, Installation testing & commissioning of CPRI approved only Electrical control panel of cubical construction, floor mounted type, fabricated out of 2mm thick CRCA sheet, compartmentalised with hinged lockable doors, dust and vermin proof, powder coated of approved shade after 7 tank treatment process, cable alley, inter-connection with suitable size copper conductor cable/solid copper strip, having switchgears and accessories, mountings and internal wiring, earth terminals, numbering etc. complete in all respect, suitable for main fire pump, pressurisation pump & diesel pump set complete as per CPWD specification with following in coming and Outgoings, suitable for operation on 415V, 3 phase, 50Hz Ac Supply with enclosure protection class IP 42 as required : INCOMING 250A, 50kA 4 Pole MCCB, Ics=100% Icu rating Digital Voltmeter 0-500V with selector switch Digital Ammeter (0-250 A) with selector swtich & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 300A OUTGOING ( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches, and LED type ON, OFF, trip indicating lamps) Main Fire Pump 125 A, 50kA TPN MCCB, Ics=100% Icu, with fully automatic Star/Delta starter suitable for 60 HP pump with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Jockey Pump 63 A, 50kA TPN MCCB, Ics=100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all acceessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation. Diesel Engine Control Control for diesel engine comprising - Automatic/Manual selctor switch & 3 attempts starting device, timers and relays as required, push buttons, start/stop in manual mode Indicating lamp for high/ Low Lub. Oil pressure, High Water Temp and Engine on indication Battery charger suitbale for 12V/24 V DC with boost and trickle selector switch, 0-30 V DC volt meter, and 0-20 A DC Ammeter All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers. Sensors, annunciation window for fault indication, as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 270 | (a) Supplying, installation, testing and commissioning of electric driven terrace pump conforming to IS 12469: 2019 suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (b) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal as required. (c) Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase, 50 Hz, AC supply with IP55 class of protection for enclosure, horiziontal foot mounted type with Class- 'F' insulation, conforming to IS-12615: 2018. (d) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (e) Suitable cement concrete foundation duly plastered and with anti vibration pads. 900 lpm at 35 m Head Make. Kirloskar,ABB,Seimens, Grundfoss, Mather & platt as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 271 | Providing & fixing of IS marked (IS:15683) 4.5kg (four point five kilogramme) portable fire extinguisher, carbondioxide type flat base including valve, discharge hose of not less than 10 mm dia. 1 M long & complete in all respects including initial fill with CO2 gas confirming to IS:15222 filled to a filling ratio of not more than 0.667 and wall suspension bracket. (ISI MARK) Make .Minimax,Safex, Ceasefire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 272 | Providing and fixing Water CO2 9 .Litrs (Nine litre) type fire extinguishers consisting of seamless cylindrical body, squeeze lever discharge valve fitted with pressure indicating guage internal discharge tube, 30cms long high pressure discharge hose, discharge nozzle, suspension bracket, confirming to IS: 15683 finished externally with red enamel paint and fixed to wall with brackets complete with internal charge. ( ISI MARK) .Make. Minimax, Safex,Ceasefire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 273 | Providing and Fixing 4 Kg. (four kilogramme) ABC MAP-50% Powder type fire extinguishers are manufactured and marked to Indian standard IS: 15683. Hose shall made of EPDM Rubber, CE Marked Valve, Suitable first aid appliance for fighting fires in Class A, B & C fire that is wood, textile, flammable liquids & gases.Make Minimax,Safex,Ceasefire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 274 | Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange..Make:Sant,Zoloto,Leader, Kartar as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. 80 mm (Eighty millimetre) dia |
| 275 | 150 mm (One hundred fifty millimetre) dia |
| 276 | Providing fixing,testing and commissioning of 15mm (fifteen millimetre) dia Pendent Type chorme furnihsed sprinkler head with quartz type bulb, set to opreate at 68 (sixty eight) degree C complete as per specification,sprinkler to be installed using wrench for each type of sprinkler up right type automatic sprinkler (UL Listed) Make.Minimax,Safex, Ceasefire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 277 | Supplying, installation, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required. (1500 mm (One thousand five hundred millimetre) as per required at site) and including all lead and lift (ISI MARK) Make.Minimax,Safex, Ceasefire, Omex as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 278 | Providing and Fixing UL/FM Listed Providing, adjustable rosette plate for 15mm (fifteen millimetre) dia in white finish UL Listed or FM approved complete as required. inculding fixing in position on pipe and celling complete in all respect as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 279 | Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheatthed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc.of the required size as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Armoured cable 25 sq. mm (Twenty five square millimetre) ( 3.5 (Three point five) core) |
| 280 | Armoured cable 70 sq. mm (Seventy square millimetre) ( 3.5 (three point five) core) |
| 281 | Providing and Fixing of PVC 3 (three) Layer water Tank 10000 ltr (ten thousand litre) Capacity HDPE water storage tanks of approve (to the approval of Engineer-in-Charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes with complete fittings, MS angle support and base support for tank including cutting, boring, drilling, welding complete in all respect to the best satisfaction of the department). Also GI tank connection including all necessary accessories like union, nipple, socket, water tank base stand angle size 50x50x5. etc.. Make Sintex ,Victus, Diplast or its equivalent to to the best satisfaction of the department. The contractor shall warranty the complete Fire fighting & sprinkler system to provide the specified flow and pressure under all condition at outlets. All the equipment shall be guranteed for a period of 12 months form the date of acceptance and taking over of the installation by the department, against unsatisafactory performs and/or break down due to defective design, material, manufacture, workmanship or installation. The equipment and components, or any part thereof, so found defective during warranty period shall be forthwith repaired or replaced free of cost to the satisafaction of the engineer-in-charge. The Equipments test certificate should be provide before installation Space for accomodating all the equipment and power supply for installation will be involved and included in the work. NOC/Approval from concrened Fire Officer/ Fire Department is to be obtained as per H.P. Fire regulation & byelawas.NOC/Approval from concrened Fire Officer/ Fire Department is to be obtained as per H.P. Fire regulation & byelawas.The installation will be accepted by the department only after receiving clearance from Chief Fire Officer for the work executed by the contractor under the agreement as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 282 | Power Backup for Uninterrupted Power Supply |
| 283 | Providing, Installing, Testing and Commissioning of ‘Silent Type’ Diesel Generating set alongwith having Prime Power Rating of 500 (five hundred) KVA, 415 (four hundred fifteen) volts at 1500 (One thousand five hundred) RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system as per CPCB IV+ norms of followings: as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 284 | Diesel Engine: |
| 285 | Diesel engine 6/10 cylinder, 4 (four) stroke water cooled radiator, electric start, of suitable BHP at 1500 RPM suitable for above output of alternator at 40 Degree C, 50% RH & at 1000 Meter MSL and conforming to IS 4722, BS 5514, BS 649, IS 10000, capable of taking 10% over loading for one hour after 12 hours of continuous operation.The engine should be radiator cooled and coolant capacity 120 litre .the total lubrication capacity should be 50 litre. The engine will be confirm to ISO 8528-3 specification and should meet CPCB-IV+ norms complete fitted complete with all the required accessories.of following makes : Cummins/ Kirloskar/ Perkins//Catterpillar/ Volvo Penta/Mitsubishi/Baudouin as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 286 | Engine mounted Instrument Panel fitted with and having digital display for following: |
| 287 | (i) Start-stop switch with key |
| 288 | (ii) Water temperature indication |
| 289 | (iii) Lubrication oil pressure indication |
| 290 | (iv) Lubrication oil temperature indication |
| 291 | (v) Battery charging indication |
| 292 | (vi) RPM indication |
| 293 | (vii) Over speed indication |
| 294 | (viii) Low lub. Oil trip indication |
| 295 | (ix) Engine Hours indication |
| 296 | (X) Turbo charger |
| 297 | Alternator : |
| 298 | Synchronous alternator rated at 500 KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 Degree C, 50% RH & at 1000 Meter MSL. The alternator shall be having SPDP enclosure, brushless, continuous duty, self-excited and self-regulated through AVR conforming to IS: 4722/BS 2613 suitable for tropical conditions and with class- H insulation. The voltage regulation should be (+/-)1% at all load between no load to full load & factor 0.8 to unity. and make:- Kirloskar/Leroy somer/ Stamford/Mitsubishi/Caterpillar. |
| 299 | Acoustic Encloure Base Frame & Foundation: Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. |
| 300 | Specially desigined to meet stringent MoEF/CPCB-IV+ norms of 75 dB maximum @ 1 mtr at 75% load under free conditions. The acoustic enslosure is made CRCA sheets in munsel green shade and structural/sheet base fame painted in black high quality noise absorbant and fire-retardant grade acoustic insulation material (P.U foam) complying to IS 8183. Both the engine and alternator shall be mounted on suitable base frame made of MS channel The foundation shoud be designed safe bearing capacity of soil. The depths of Plain cement concrete foundation is minimum 450 mm and foundation height should be at least 300 mm above the ground level. The length and breadth of foundation should be at least 250 mm more on all sides than the size of enclosure.The Gen set should be mounted on Anti vibration isolation arrangement as per recommendations of manufacturer. |
| 301 | Fuel Tank: |
| 302 | Daily service fuel tank of suitable capacity fabricated out of 3 mm (three millimetre) thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. There should be provision of fuel tank of fuel guage ,which should be show the level of the fuel even when the DG set is not running . the guage should be calibrated .The fuel tank should be filled from the outside as automobiles and should be with a lockable cap. Complete with valves, level indications & accessories as required as per specifications. |
| 303 | Exhaust System: Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor. |
| 304 | 12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable 2 no of battery , 360 Amp. Hour capacity lead acid type) including 70sqmm copper cable .The battery should be accommodate in battery rack as required as per specifications. |
| 305 | Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable connection/connection through bus-trunking. Such arrangements on acoustic enclosure should be water proof & dust-proof conforming to IP-65 protection. The enclosure shall be as per CPCB IV + or better norms etc. and as per CPWD specifications. |
| 306 | Complete rate of DG Set including, Price of erection of DG set, and cable connections etc. complete in all respect as per best satisfaction of Engineer-In-Charge. |
| 307 | (I) AMF Panel: Free standing floor mounted IP 42 (forty two) automatic mains failure control panel including auto by-pass, suitable for 500 KVA as below for silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication/ Ethernet /RS485/SNMP port open protocol for BMS integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by Engineering in charge and including the following: 1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip. 2. Auto/Manual/Test/Off selector switch 3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay). 4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering 5. Energy analyser unit to indicate current, Voltage( LN & L_L), kW, kVA (Phase & Total), Frequency, KWH, PF. 6. LED Indicating lamps for load on mains and load on set 7. Fuse/ MCB for instruments 8. Battery charger, complete with transformer/ rectifier, D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. 9. Main supply failure monitor 10. Supply failure timer 11. Restoration timer 12. Control unit with three impulse automatic engine start/stop and failure to start lockout. 13. Impulse counter with locking and reset facility. 14. ON/OFF/Control circuit switch with indicator 15. Audio/Video annunciation for (i) High water temperature (ii) Low lubricating oil pressure (iii) Engine over speed (iv) Engine fails to start (v) Full load/maximum load warning 16. Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable number of relays and accessories 17. Maintenance notification based on Engine Run Hour & due date. 18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel , interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start / auto stop depending upon load status and requirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 308 | Annual comprehensive maintenance contract of 500 (five hundred) KVA DG SET each year consisting of quarterly general visit to check the general condition of generator and load management panel to the best satisfaction of Engineer-in-Charge. The AMC shall commence immediately upon completion of a 1 (One) Year Free Warranty and Service period from the date of successful handover to the client department. The scope covers quarterly preventive visits, tuning of sub-assemblies (fuel timing, tappet clearance, fasteners, warning devices), and execution of full engine servicing strictly per OEM norms. Rates are fully comprehensive, including all required consumables (engine oil, filters, coolant, fan belts, lubricants, fuses, battery water/terminals, AMF control wires, connectors, and thimbles). Any breakdown or defect in the DG set or AMF panel must be rectified within 24 hours by a service engineer. During the 1-year free warranty period, any defective components shall be repaired or replaced within 24 hours free of cost. The agency must deliver all testing/commissioning certificates at handover, alongside required installation permissions and the statutory NOC from the Chief Electrical Inspector of HPSEBL. All work as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 309 | LIFTSSupplying, Installation, Testing & Commissioning of minimum 13 (thirteen) passenger capacity passenger Machine room less (MRL) lift with regenerative drive as per CPWD General Specification for Electrical Works (Part-III Lift & Escalator) 2003, BIS Codes, NBC 2016 as amended upto date having provision for barrier free access as per Harmonised Guidelines & Standards for Universal Accessibility in India - 2021 of MoHUA, serving different floors in the lift shaft as per detailed specifications enclosed and as under including all other equipment and accessories complete as required:- (i) Speed-1 MPS (ii) Floors-5 (G+4) (iii) Travel -17 Meters (approx.) (iv) Stops & opening- 5 stops and 5 openings (v) Controller: A.C. variable voltage & variable frequency (vi) Automatic rescue device (ARD) complete with dry maintenance free batteries as required. vii) Operation: Microprocessor based single automatic push button/simplex selective collective/duplex collective selective with/without attendant (viii) Power-415 Volts+10%, 3 phase, 50 Hz, 4 wires system (ix) Car Enclosure: Stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish) on all sides and stainless steel decorative ceiling with fans (indirect throw) and LED fitting. (x) The car flooring should be smooth and antiskid as approved by engineer-in-charge. (xi) Type of doors (a) Car: Power operated, centre opening horizontal sliding stainless steel scratch proof (Moon Rock/Honeycomb/ Hairline Finish). (b) Landing doors: stainless steel scratch proof . (xii) A hand rail not less that 600mm long at 900mm above floor level to be fixed adjacent to control panel in the lift car. (xiii)Voice announcement system in the car to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator. (xiv) Closed loop Control System, protection against power fluctuation, self diagnostic control, Landing doors 2 hours Fire rated, Overload detection and protection, Overspeed Governer, Dot Matrix LED D & P Indicators In Car & Landings, BMS Compatibility, tamper proof infrared curtain covering almost the entire height of the lift car door, Alarm horn, Anti Nuisance Operation, CCTV camera system with 4 MP IP camera, suitable NVR and HDD for 30 days storage backup , Firemen switch, 2/3 way intercom, Emergency Stop Switch with battery backup for fan and light fitting for 1 hour, pit ladder. (xv) The lift doors shall have a vision panel to enable persons with hearing impairment to signal for help or assistance in the event of an emergency. (xvi) An appropriate technological support be provided (Through emergency messaging |services or alarms etc.) to respond to the emergency requirements of person with hearing impairment or deafness. (xvii) In case of failure of ARD or other electronic devices, a provision of manual rescue be provided. (Make :-OTIS/TKE/KONE/ MISTSUBISHI/ JOHNSON) as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 310 | Providing Comprehensive Annual Maintenance Contract for two Nos. Passenger Lifts; Simplex Automatic with/without attendant] for a total period of 5 (five) years. The scope includes quarterly monthly preventive servicing, checking of safety devices, and prompt breakdown maintenance with minimum downtime. The contract is fully comprehensive, covering the troubleshooting, repair, and replacement of all worn-out components, including lamps,push buttons, drive, ARD batteries, and over-voltage protection devices. The maintenance cycle commences with 1 (one) year of free service after successful handover to the client department. Rates are all-inclusive of labor, carriage of materials within all leads/lifts, and all applicable statutory levies (including GST, octroi, royalty, malkana, toll tax, or other government taxes imposed from time to time). All operations shall be carried out to the entire satisfaction of the Engineer-in-Charge as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 311 | VRV SYSTEMVRV Outdoor UnitSupply, installation, testing and commissioning of TOP DISCHAGE Variable Refrigerant Flow modular type air-conditioning system inclusive of five year comprehensive warranty, suitable for Cooling & Heating both by multiple scroll compressor controlled by individual inverter complete with indoor and outdoor units with individual wired and wireless/wired remote controller for indoor units and centralized controller, interconnecting refrigerant piping, full charge of refrigerant gas (R-410A) & oil, internal control cabling and fittings etc. as per details given in specifications and having following items. The out door units shall be suitable for 3 phase 4 wire system, 415V + 10 %, 50 Hz AC supply and indoor shall be suitable for Single phase 220-240V, 50 Hz AC supply Outdoor UnitsSupply, installation, testing & commissioning of Modular type outdoor units inclusive of five year comprehensive warranty, equipped with highly efficient scroll compressors(OEM manufactured) fully inverter controlled i.e. changes its speed in accordance to the variation in cooling loads, special heat exchanger, low noise condenser fan, & including full charging of R-410A refrigerant gas complete i/c powder coating complete as per specifications. Out door units shall be provided with MS stand of suitable size duly painted with corision resistant paint suitable for outdoor application.The units shall be in combination of one or more units which shall be selected in such a way that EER in cooling mode of each unit at 100 % shall not be less than 4.1 i.e on 35 Deg C DB Ambient and at 27 Deg CDB & 19 Deg CWB inside conditions. The units shall be suitable to operate upto 52 Deg C ambient conditions in summer and -25 degree celcius in winter.All the units shall be provided with built-in microprocessor control panel, for automatic operation and capacity control,which should be air cool.Machines shall be suitable for working with BMS system. The outdoor unit should be fitted with low noise level and should not be more than 60 db (A) during Night Shift Mode when measured at a point 1 mtr in front of the unit at a height of1.5 mtrs. External Static pressue of the outdooe units should not be less than 80PaIt is mandatory that each compressor shall have inverter technology separately i.e. outdoor units shall have all inverter based compressor.Compressor and machine should be of same OEM. The inverter technology based Scroll compressor modular type VRF equipment should be designed, so that refrigerant piping between outdoor units and furthest indoor unit shall be extendable up to 200m. Allowable level difference between outdoor & indoor unit shall be 110m in case of outdoor unit on top & 110m in case of outdoor unit at bottom. Allowable level difference between two indoor units connected to same outdoor unit shall be upto 40m.Following capacities of ODUs are at standard operating condition as defined above and Vendor to indicate COP at 100% load & at part loads i.e. 75% & 50% in the data sheets/ shop drawings: The outdoor unit shall have twin scroll compressors and be able to operate even in case of breakdown of one of compressor. Each circuit of outdoor units shall have a minimum of 2 cans for redundancy incase of breakdown. The Equipment should have a operating range till 52 Deg C. Approved Makes - Daikin/ O-General/ Mistubishi as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 312 | Capacity : 24 HP (Twenty four horse power) - Outdoor Unit |
| 313 | Capacity : 18 HP - (Eighteen horse power) Outdoor Unit |
| 314 | `Indoor Units: Ducted Type: Supply, installation, testing and commissioning of following minimum capacity VRV/VRF Ductable Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan /dynamically balanced blower, multispeedmotor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill , necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V±10%, 50 Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 (nineteen) Degree C WB temperature.`Make- Daikin, O-General, Mitshubishi ElectricDuctable Type : 8.2 TR Actual, 2800 CFM min as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 315 | `Indoor Units: Ducted Type: Supply, installation, testing and commissioning of following minimum capacity VRV/VRF Ductable Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan /dynamically balanced blower, multispeedmotor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill , necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V±10%, 50 Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.`Make- Daikin, O-General, Mitshubishi ElectricDuctable Type : 6.6 (six point six) TR Actual, 2400 CFM min as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 316 | `Indoor Units: Cassette Unit: Supply, installation, testing and commissioning of following minimum capacity VRV/VRF Ductable Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan /dynamically balanced blower, multispeedmotor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill , necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V±10%, 50 Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.`Make- Daikin, O-General, Mitshubishi Electric .Ductable Type : 2.08 (two point zero eight) TR Actual, 830 CFM min as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 317 | `Indoor Units: Cassette Unit: Supply, installation, testing and commissioning of following minimum capacity VRV/VRF Ductable Type Indoor ceiling mounted unit equipped with synthetic washable media pre-filter, fan section with low noise fan /dynamically balanced blower, multispeedmotor, coil section with DX Copper coil, electronic expansion valve, outer cabinet, drain pump, grill , necessary supports, vibration isolation, corded remote control etc., suitable for operation on single phase 230 V±10%, 50 Hz AC supply, complete, as required. The unit shall have automatic force shut down provision in case of fire on receiving signal from BMS System. The cooling capacity of indoor unit will be at air inlet conditions of 27 Degree C DB and 19 Degree C WB temperature.`Make- Daikin, O-General, Mitshubishi Electric .Ductable Type : 1.32 (One point three two) TR Actual, 580 (five hundred eighty) CFM min as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 318 | Supply, Installation, Testing & Commissioning of DX-type ceiling mounted air handling units of following capacity suitable to operate at 415+10% volt, 50 Hz, 3 phase AC power supply as specified complete with the followings:(i)Fan Section with canvas connection double skin type made of 25 mm (twenty five millimetre) thick panels consisting of preplasticized G.I. casing of thickness 0.6 mm outside layer and 0.6 mm thick plane G.I inside layer with polyurethane foam (PUF) insulation of density 40+2 Kg/m3 factory injected between them by injection moulding machine. The AHu should be with thermal break profile. (ii)1 Nos. DIDW Centrifugal forward curve supply air blower with static pressure of 50 mm WG static pressure.(iii)DX coil section with aluminium finned copper tubes (tube thickness not less than 0.30mm) 6 row deep type cooling coil. The coil should be arranged to connect with multi circuits of outdoor units of required capacity. (iv) Pre filters with filter section with 50 mm thick washable synthetic type air pre- filters having efficiency 90% down to 10 micron. (v)20 G SS Drain pan, drain connection. (vi)Drive motor, drive arrangement, guard etc. Belt drive package with TEFC(IE 2) suitable at 415+10% volts, 50 Hz, 3 phase AC power supply.(vii) Necessary vibration isolators, complete in all respect including controls, supporting arrangement & complete in all respect as required. (viii)AHUs will be VFD controlled, all necessary accessories required for same should be quoted along AHU cost. Make:-Zeco/ Edgetech/ (daikin/ Citizen/Carrier as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. AHU Unit - 10 (ten) TR 4200 (four thousand two hundred) CFM |
| 319 | Interconnecting refrigerant pipe work with (19mm/13 mm thick) (Nineteen millimetre/thirteen millimetre) closed cell elastomeric nitrile rubber tubular insulation between each set of indoor & outdoor units as per specifications, all piping inside the room shall be properly supported. Refrigerant Piping Make- Mexflow,Hariom,Jobu,Rajco as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 320 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .41.27 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 321 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm (One point six two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 322 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .28.58 mm (Twenty eight point five eight millimetre) dia (OD) (Hard drawn) with tube thickness 1.2 mm(One point two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 323 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .22.2 mm (Twenty two point two millimetre) dia (OD) (Hard drawn) with tube thickness 1.2 mm (One point two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 324 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .19.00 mm (Nineteen millimetre) dia (OD) (Hard drawn) with tube thickness 1.2 mm (One point two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 325 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .15.86 mm (Fifteen point eighty six millimetre) dia (OD) (Softdrawn) with tube thickness 1.2 mm (One point two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 326 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .12.70 mm (Twelve point seven zero millimetre) dia (OD) (Softdrawn) with tube thickness 1.2 mm (One point two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 327 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .9.5 mm (Nine point five millimetre) dia (OD) (Softdrawn) with tube thickness 1.2 mm (One point two millimetre) with 19 mm (Nineteen millimetre) thickinsulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 328 | Refrigerant Piping: Supply, Installation, testing and commissioning including vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn copper refrigerant piping for VRV/VRF system, complete withfittings, with suitable adjustable ring type hanger supports, jointing/brazingin cluding accessories, insulated with XPLE Class-O tubular sleeves section of specified thickness as given below for Suction and Liquid lines, all accessories as per specifications etc. as required : `Make- Hariom, Mandev, Maxflow , RR .6.4 mm (six point four millimetre) dia (OD) (Softdrawn) with tube thickness 1.2 mm (One point two millimetre) with 19 mm (Nineteen millimetre) thick insulation as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 329 | Hard drawn PVC drain piping alongwith fittings and 6 mm (six millimetre) thick tubular insulation .Make-Supreme,astral, Telerex, Precision |
| 330 | Supply, installation, testing and commissioning of rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm (six millimetre) thick closed cell nitrile rubber insulation. `Make- Supreme,astral, Telerex, Precision25 mm (Twenty five millimetre) dia as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 331 | Supply, installation, testing and commissioning of rigid PVC piping complete with fittings, supports as per specifications and duly insulated with 6 mm (six millimetre) thick closed cell nitrile rubber insulation. `Make- Supreme,astral, Telerex, Precision32 mm (thirty two millimetre) dia as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 332 | Supply, Installation, Testing and Commissioning of control cum transmission wiring of VRV system 2 (two) core x1.25 sq mm (One point two five square millimetre) copper wire in suitable PVC conduits between indoor & outdoor units to central remote controllers & for connections between indoor unit to remote control. Make: Finolex,Anchor,Polycab,Havells as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 333 | Supplying, Installation, Testing and Commissioning of GI ducting material as per technical specifications and drawings complete with all fitting, accessories, dampers, vanes, take offs, canvas connections transformation. The rate shall include suspension and supporting arrangement with angle iron and dash fasteners. Make; Tata/Sail/JSW/Jindal as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 334 | 24 G (Twenty four gauge) |
| 335 | 22 G (Twenty two gauge) |
| 336 | Supply and fixing of without powder coated grills Make- Uniare/Flowair or its equivalent to the best satisfaction of the department as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 337 | Extruded Aluminium powder coated supply air linear grills without volume control dampers and mounting frame.finished in approved shade.and defuser.Make- Uniare/Flowair or its equivalent to the best satisfaction of the department as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 338 | Acoustic lining of duct work with 50 mm (Fifty millimetre) thick fiberglass(density 48kg/cum (Forty eight kilogramme per cubic metre) stick using shalikote primer hot bitumen and mechanically fastened, covered with RP tissue and 30G (Thirty gauge) aluminum perforated sheet . Acoustic lining shall be rigid board Twiga 300. Make: ACCO FLEX , AFlex or its equivalent to the best satisfaction of the department as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 339 | Supply of 9 mm (Nine millimetre) closed cell Nitrile Duct thermal insulation complete with adhesive and black taping. Make: ACCO FLEX , AFlex or its equivalent to the best satisfaction of the department as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 340 | Supply, Installation, Testing & Commissioning Canvas Connection for Ductable Machines. Make: As per OEM as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 341 | SITC of ODU Stand and making good to the damages as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 342 | Main Electrical Panel (CPRI Approved manufacturer atleast 70 (Seventy) K) DSR 15.1The panel drawing shall be approved before taking up thefabrication and Shall have compatible BMS for future requirement.BhalgSet 1Main A.C. PanelIncomerINCOMING SUPPLY: MCCB 300 Amps65 KA 4 Pole Micro processor based Adjustable type with Rotary Mechanism & all Protections along with spreader links,etc: 1 No.Multi Function VAF/VIF Meter (96mmX96mm Size) Indication Lamps LED Type RYB, Control MCB SP for Control (3 Nos), CT's 400/5 (3 Nos) and Control Terminal (8.0 Nos.) etc.Outgoing10 No. 40-63 Amps TP+NL MCCB with adjustable release 50 KA with ROM & Spreader links S/c, O/L & other protections outgoing for ODU& IDU All starter shall have following accessories:1 No. overload relay1 No. Ammeter with CTs.1 No. single phase preventer2 Nos. ON/OFF indicating lights2 Nos. ON/OFF push buttonsHardware (PVC Channels/MСВChannels/FibreGlass/Gaskits/Sleeves/nuts/Bolts/washers/coo ling fans/etc)Complete Wiring inclusive of thimbles,etc as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 343 | Main Electrical Panel (CPRI Approved manufacturer atleast 70 (Seventy) K) DSR 15.1The panel drawing shall be approved before taking up thefabrication and Shall have compatible BMS for future requirement.BhalgSet 1Main A.C. PanelIncomerINCOMING SUPPLY: MCCB 100 (One hundred) Amps65 KA 4 Pole Micro processor based Adjustable type with Rotary Mechanism & all Protections along with spreader links,etc: Multi Function VAF/VIF Meter (96mmX96mm Size) Indication Lamps LED Type RYB, Control MCB SP for Control (3 Nos), CT's 400/5 (3 Nos) and Control Terminal (8.0 Nos.) etc.Outgoing10 No. 16-32 Amps TP+NL MCCB with adjustable ROM & Spreader links S/c, O/L & other protections outgoing for IDUAll starter shall have following accessories:1 No. overload relay1 No. Ammeter with CTs.1 No. single phase preventer2 Nos. ON/OFF indicating lights2 Nos. ON/OFF push buttonsHardware (PVC Channels/MСВChannels/FibreGlass/Gaskits/Sleeves/nuts/Bolts/washers/coo ling fans/etc)Complete Wiring inclusive of thimbles,etc. Make-Kalyani, KEPL, Swayut,Varindawan etc. as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 344 | Supplying, Installation, Testing and Commissioning of Y-Joints as per OEM as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. |
| 345 | Supplying, Installation, Testing and Commissioning of DGT Kit for ODU Units as per OEM as approved by Engineer-In-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. Please Enable Macros to View BoQ information |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail