|
| 1 | Excavation in trenches, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exceeding 10 Sqm area on plan and not exceeding 1.5 meter in depth and getting out in Hard /dense soil complete all as specified and directed. |
| 2 | M & L for Cement concrete type D2 1:4:8 using 40mm graded stone aggregate in foundations, filling and mass concrete complete all as specified and directed |
| 3 | M & L for 40 mm thick Cement Concrete M-15 Nominal Mix (using 12.5 mm graded stone aggregate) as in damp proof course (DPC) to horizontal or vertical surfaces including necessary form work and mixing of water proofing compound as per manufacturer’s instructions complete all as specified and directed. NOTE: - water proofing compound will be measured and paid separately. |
| 4 | Supply only Integral water proofing compound (WPC) complete all as specified and directed. |
| 5 | Returning filling in including speading,leveling ,watering and well ramming in layers not exc 25 cm in soils complete all as specified and directed |
| 6 | Removing of excavated Soil n exc 50m and depositing where directed at a level n.exc 1.50m above the starting point complete all as specified and directed |
| 7 | M & L for providing PCC type B0, 1 : 2 : 4, (using 12.50 mm graded aggregate) as in coping, and the like including weathering, slightly rounded or chamfered angles and throating complete with using WPC complete all as specified and directed |
| 8 | M & L for rendering 10mm thick internal surfaces on brick work in cm 1:6 in and finishing surfaces even and fair without using extra cement complete all as specified and directed |
| 9 | M & L for rendering 15mm thick in two layers on external surfaces on brick/concrete in CM 1:4 finished even and smooth without using extra cement with WPC complete all as specified and directed . Note :- WPC measured and paid separatly |
| 10 | M&L preparing newly plastered surfaces of wall and applying complete wall with 1.0 mm Wall putty and making smooth surfaces and applying two coats of Oil bound distemper over a coat of primer all as specified and directed . |
| 11 | Preparing New plastered surfaces and applying Two coats of cement base paint on surfaces of walls over one coat of white wash complete all as specified and directed . |
| 12 | M & L for PCC 1:2:4 type B-1, 25 mm thick, using 20mm graded stone aggregate complete all as specified and directed. |
| 13 | M & L for light shed virified ceramic tiles 7.5 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in skitting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl 10mm thick rendering bed or bedding layer with CM 1:4 complete all as specified and directed .Notes : Shade of the tile including colour,design and pattern shall be approved by AGE. |
| 14 | S & F of Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 15 | S&F 4 mm thick HPSC (High Pressure steam cured) pre-primed textured designer board, water resistant, be placed in the grid system complete all as specified and directed . |
| 16 | S & F Powder coated aluminium frame/shutters for Door,windows, ventilators sliding/openable etc icluding joining cleat for fixing, locking arrangement,rubber beading, screws,etc complete all as specified and directed Note : (i) Glazing and wire mesh shall be measured and paid separetely only as the labour element included in the relavent item.(ii) Item shall be paid as per weight of aluminium section (iii) The rate quoted shall be inclusive of the cost of neoprene beading, glazing pin, screws and powder coated fittings such as locking arraangement etc as required, which shall not be measured for arriving the weight.(iv) The rate shall also be inclusive of complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing. |
| 17 | S & F for 6mm Powder coated decorative aluminium grill complete all as specified and directed |
| 18 | S&F 5mm thick tinted glass in aluminium doors & windows with rubber packing glass complete all as specified and directed |
| 19 | S&F in repairs aluminium (Die cast ) body door closer hydraulically regulated designation No-3 universal type suitable for door shutters of 85 to 1000mm in width and of weight between 61 yo 80 kg snf complete all as specified and directed . |
| 20 | S & F 5 MM thick ACP Sheet fixed to alm frame work as specified and as directed |
| 21 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed (Glass shall be paid separately Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 22 | S & F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed . |
| 23 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete as specified and directed. |
| 24 | S&F of Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing including distance pieces, cleats etc Fe 410 W (Gde E - 250 quality) as specified complete as specified and directed. |
| 25 | S&F in Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.18mm and fixed with beeding/Staples complete as specified and directed. |
| 26 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 27 | Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 28 | M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan exc 6 m mean radius built in CM (1:6) all as specified and dircted |
| 29 | M&L fly ash Brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in CM (1:6) all as spfd. |
| 30 | M & L for 18- 20 mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. |
| 31 | S&F sinks with drainage board made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including waste pipe and coupling complete all as specified and directed. |
| 32 | S&F of sink mixer ESCCO STE-107309 Wall Mounted with all assembly all as specified and directed |
| 33 | Dismantling Stone slabs and tiles of any description or thickness in floors & pointed in any Mortar all as specified and directed. |
| 34 | M & L for vitrified ceramic tiles double charge light shed of 7.5 mm thick (square/ rectangular) polished, area of each tiles n.exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick in cement mortar 1:4 complete all as specified and directed |
| 35 | Taking down cement plaster any description on brick or stone walls etc including Removing of tree/plant girth not exc 15 cm from wall/roofing including removing all roots ,raking out joints, hacking for key, scrubbing down with water complete all as specified and directed. |
| 36 | M &L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth (without using extra cement) using water proofing compound.as directed. |
| 37 | M&L for rendering 10 mm thick in ceiling on brick work or concrete surfaces in CM 1:4, finished even and fair complete all as specified and directed. |
| 38 | M & L Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth (without using extra cement). |
| 39 | M&L 40 mm thick cement concrete type B-0 (1:2:4) using 12.5 mm graded stone aggregate as in levelling coarse of roof/floor complete all as specified and directed. |
| 40 | M &L Glazed ceramic coloured tiles in vertical surface 450X 350 (7-8mm) thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar 1:4 on fair face of brick work or concrete surfaces as backing for tiles.all as specified and directed |
| 41 | M & L coloured Non Skid ceramic coloured jointless tiles (square/rectangular) area of each tile exc 0.18 Sqm but not exc. 0.38 Sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM 1:6. |
| 42 | M & L for applying two coats of oil bound distemper with roller over one coat of primer,after preparation of new surfaces of walls etc, complete all as specified and directed. |
| 43 | M&L for 1 mm thick of Birla white putty/JK white wall care putty in two layer on new/old plastered surfaces and making the surface uniform & smooth. Note:Application of new/old finishes to be carried out by authorised applicator. |
| 44 | M&L for Preparation of old decorated surfaces of ceiling and applying one coat of distempering with acrylic distemper as per manufacturer instructions white or tinted complete all as specified and directed. |
| 45 | S &F Floor door stopper (150 mm) of brass body and tongue with hard drawn steel spring all as spfd and directed. |
| 46 | S&F 4mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed. |
| 47 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixing rubber gasket with aluminium frame in each pane |
| 48 | S & F Stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples, . |
| 49 | Supplying and laying of CPVC pipes 25 mm outer dia SDR 11 including fittings on walls/ceiling or laying in floors incl chase cutting complete all as specified |
| 50 | S&F of 25mm dia tank union cpvc complete all as spfd and directed. |
| 51 | S&F of 20mm dia brass elbow complete all as spfd and directed. |
| 52 | S&F of 20mm dia brass Tee complete all as spfd and directed. |
| 53 | S & F Supplying and laying of CPVC pipes 20 mm outer dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors complete all as specified and directed |
| 54 | S & F of Male & Female Brass Threaded Adaptor (MFTA & MTA/ MBTA & MFBTA) complete all as specified and directed. |
| 55 | S&F 25mm CPVC Gate Valve/tank union/Float valve fixed in pipe all as Specified and directed. |
| 56 | M&L Brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed 200mm long |
| 57 | M&L Extruded brass handles, fabricated type polished 150mm long all as spfd . |
| 58 | S&F 125 mm long Stainless steel butt hinges with steel hinge pin etc. |
| 59 | M&L for preparation of new/old decorated surfaces of wall and applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed.. |
| 60 | M&L for 18 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces ; fixed with screws to timber frame work complete all as specified and directed. |
| 61 | M&L for 12 mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on both faces; fixed with screws to timber frame work complete. |
| 62 | S & F of 30 mm wide flap when open, stainless steel bright finish or electro galvanised continuous (Piano) hinge complete all as specified and directed. |
| 63 | S&F magnets to be used in cabinets as specified and directed |
| 64 | Supply & Fixing heavy duty telescopic sliding channel suitable for 18/19 mm thick prelaminated paarticle board/ply board fixed at site as per directed. |
| 65 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 110 mm bore of pipe etc complete all as specified and directed. |
| 66 | M&L for PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors or walls of 75 mm bore of pipe etc complete all as specified and directed. |
| 67 | S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed. |
| 68 | S&F PVC (SWR) bends ISI marked any radius of 75 mm bore with access door complete all as specified and directed. |
| 69 | S&F PVC (SWR) junction single, (single T) equal or un equal of 110 mm bore of pipe complete all as specified and directed |
| 70 | S&F PVC (SWR) vent cowl for 110 mm bore pipe |
| 71 | S&F PVC (SWR) multi floor trap with grating 75 mm dia including jointing with solvent cement |
| 72 | S&F PVC (SWR) multi floor trap with grating 100 mm dia including jointing with solvent cement |
| 73 | S&F in repair rotational three layer moulded polyethylene water storage tanks (cylinderical vertical with closed top) capacity 1000 Ltr hoisted and fixed in position including Dismantling water tanks and removing to store all as specified and directed |
| 74 | S & F of 600mm x 450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 75 | S&F in repair 15 mm dia bore bib taps, cast copper alloy chromium plated fancy type with crutch alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 76 | S&F as in repair 15mm stop valves cast copper alloy chromium plated fancy type concealed type screwed down high pressure with crutch or butterfly handle screwed down, high pressure with crutch screwed both ends for iron pipe or for unions and fixed in repairs all as specified and as directed |
| 77 | S&F brass chromium plated Shelf glass/Corner self assembly with CP screws etc complete all as spd and directed. |
| 78 | S&F wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe,connection leg & wall flange suiitable for 15mm bore pipe complete all as specified and directed |
| 79 | S&F CP towel rail/ring all as specified and directed |
| 80 | S&F Two way bib cock with wall flange All as spfd and directed |
| 81 | S &F as in repair jaguar chromium plated maze over head shower 300x300mm square shape single flow(body & face plate stainless) with rubit cleaning system including shower arm complete all as specified and directed.. |
| 82 | S&F Table top wash basin white size 600X440X165mm including Bottle Traps, chain & plug and porcelain stopper brackets or fixed s all as specified and directed |
| 83 | Supply & fix Single lever tall boy with 150mm ewtension body fixed spout without spout popup waste system with 600mm long braided hoses brass chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified and directed |
| 84 | S&F CP health faucet 15 mm with flexible tube of stainless steel provided rubber hose and wall hook etc complete as in repair all as specified. |
| 85 | S&F PVC connections 15mm size with PTMT nuts of length 450/600 mm all as specified and as directed. |
| 86 | S&F water closet pan with unibody including cistern & slim soft closet seat cover all as specified and directed. |
| 87 | M & L for 75mm thick PCC 1:3:6 type C2 (using 40mm graded aggregate as in plinth protection and finishing surfaces even and smooth without using extra cement. |
| 88 | Taking down chowkhats for frames exc 1.5 Sqm but not exc 4.00 Sqm. |
| 89 | Taking down chowkat or frame with shutter (without taking off shutters from the frames) area not exceeding 1.5 Sq mtr each |
| 90 | M&L for pressed steel door frame size 125 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 91 | M & L for pressed steel door frame size 105 mm x 60 mm made of 1.25 mm thick sheet including necessary fixing lugs, hinges, lock strike plate etc., complete, all as specified. |
| 92 | M&L for providing PCC 1:3:6, type C-0 (using 12.50 mm graded stone aggregate) as in filling of pressed steel door frame and holdfasts including necessary formwork etc. |
| 93 | M&L for 30 mm thick Flush shutters, solid core construction, with block board core plywood face panels on both side, commercial type on both sides including 5 mm thick edging/beading on exposed to view on sides & top complete all as specified and directed. |
| 94 | S&F mortise door lock handle set 200mm 1CK gloria 7 pin brass tumbler mechanism 60 mm all as spfd and directed. |
| 95 | M & L for 0.9mm thick decorative laminate(mica) type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions |
| 96 | M&L for 35mm thick second class hardwood glazed and skelton door shutters (Three panels) open rebated and prepared to receive glass / gauge etc edges of framing plain chamfered or rounded with cut and mitred beads for securing glass/gauges etc with sash bars size of members of shutter as specified in SSR Part-I section 8, clause 8.24 (a) complete all as specified and directed. |
| 97 | S&F in repair Aluminium body ISI marked Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 98 | M&L For Chequered cement concrete tiles 20cm x 20cm x 25 mm thick, set, jointed and pointed in neat cement slurry in floors with gray pigments cement and pigments. |
| 99 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proofS.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed (Glass or wiremeshshall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but noextra payment on this account shall be made. |
| 100 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series)frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Glass shall be paid separately). Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 101 | M & L RCC type B-1 1:2:4 (using 20mm graded stone aggregate) as in slabs supported on walls, beams and columns, and in shelves including form work and the like complete. |
| 102 | M & L for TMT bars 8 mm dia & over cut to length, bent to shape required, including crancking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete |
| 103 | S&F stainless steel draphery rod 25-28mm dia fancy type with brackets,decorative end caps coloured to match complete all as specified & directed |
| 104 | M&L for voids in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as spfd and directed. |
| 105 | M&L for ATT Along the external wall below concrete or masonry apron using chemical emulsion@ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as spfd and directed. |
| 106 | M&L at points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre tocentre and sealing the same |
| 107 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down with water etc. applying two coats of oil bound distemper with roller over one coat of primer, complete all as specified and directed. |
| 108 | M&L for complete removal of existing treatment of wall by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots including washing down water etc. applying two coats of antifungal exterior paint (of shade/colour as directed by GE) over one coat of primer all as per manufacturerinstruction including necessary scaffoldings etc. complete all as specified and directed.Note:Application of new/old finishes to be carried out by authorised applicator by spray painting. |
| 109 | S&F mild steel Framed work such as grills, gratings etc, with ends of bars shouldered or rebated or forged into spikes, framed guard bars, barred iron doors, railings, framework of water tanks and similar work conforming to Fe -290 Grade -E-165, complete all as specified and directed. |
| 110 | M&L two coat of syntetic enamel paint over new steel/old surface of any description over 10cm in width or grith not otherwise described over one coat red oxide primer including preparation of surfaces complete. |
| 111 | S & F Solid PVC Door frame size 50mmx 47mm made out of 5mm single side prelam PVC sheet & edges will be painted to match with prelam sheet reinforced with M.S. Square tube and fixing in opening as per spc & drawing. |
| 112 | S&F factory made solid panel PVC door shutter 30mm (Style) consisting of frame made out of M.S tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheets to be fitted in the M.S frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifiaction & drawing. |
| 113 | S &F as in repair stainless steel grade 304 modular kitchen trolly plain basket 430x500x200mm all as spfd and directed. |
| 114 | S &F as in repair stainless steel grade 304 modular kitchen trolly plain basket 430x500x150mm all as spfd and directed. |
| 115 | S &F as in repair stainless steel grade 304 modular kitchen sheet cuttlery basket 430x500x100mm all as spfd and directed. |
| 116 | S &F as in repair stainless steel grade 304 modular kitchen trolly plate basket 430x500x150mm all as spfd and directed. |
| 117 | S &F as in repair stainless steel grade 304 modular kitchen thali basket basket 430x500x200mm all as spfd and directed. |
| 118 | S &F as in repair stainless steel grade 304 modular kitchen double pull out basket 430x500x200mm all as spfd and directed. |
| 119 | S&F aluminium profile handle 50x20mm complete all as spfd and directed. |
| 120 | Taking down copper /aluminium point wiring (light, fan, bell,socket or power) complete including fixture and fittings such as switches, ceiling roses, pendent, regulators, sockets, light fitting etc. Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces of walls, floors etc complete all as specified and directed at site. |
| 121 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface complete all as specified and directed. |
| 122 | Taking down carefully copper/ aluminium sub main wiring of any size from surface/ concealed /existing conduit of any height and removing materials at site and making good disturbed surfaces of walls, floors roofs etc complete all as specified and directed. |
| 123 | Taking down existing geyser of any capacity after disconnecting all necessary electrical and water supply connections and deposit to MES store yard of AGE E/M Gaya complete all as specified and directed. |
| 124 | Taking down ceiling fan/ exhaust fan of any sweep after disconnecting all necessary electrical connections from ceiling rose to fan, fan blades and deposit to MES store yard of AGE E/M Gaya complete all as specified and as directed. |
| 125 | M & L for point wiring using approved colour coding as per IS, with multistranded copper conductor 1.5 Sqmm (nominal area), two single core, PVC insulated and unsheathed FRLSH cable 1100 volts grade ISI-694 marked drawn through in and including heavy duty, PVC concealed conduit of white/ ivory colour including all accessories after chasing in wall/ceiling etc, heavy duty ISI marked, with GI sunken boxes 1.2 mm thick, 60 mm deep with earth dolly duly, covered with modular white cover plate with inner frame suitable for modular switches, including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLSH cable as earth continuity conductor to common earth and connecting to earth dolly including cutting, chasses and making good disturbed surface to match with existing finish with plaster complete all as specified and directed |
| 126 | (a) One light point controlled by one, one way switch 5 Amps |
| 127 | (b) One ceiling / exhaust fan point controlled by one, one way switch 5 Amps |
| 128 | (c) One 5 Amps socket outlet point controlled by one switch on the same board. |
| 129 | (d) One 5 Amps socket outlet point controlled by one switch on independent board. |
| 130 | (e) One bell point controlled by one, bell switch 5 Amps |
| 131 | Description all as per item No 125 here-in-before but using 2.5 sq mm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 Amps switch socket combination point including necessary running of 2.5 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 132 | Description all as per item No 125 here-in-before but using 4.0 sqmm single core copper conductor FRLSH cable of multistranded PVC insulated unsheathed 1100 volts grade for 5/15 amps switch socket cobmination point including necessary running of 4.0 sq mm copper conductor FRLSH cable of multistranded PVC insulated unsheathed as earth continuity conductor along with wiring and connecting to the common eath dolly. |
| 133 | S&F ceiling rose, surface bakelite with 3 terminals, ISI marked for batten fitting complete all as specified and directed.. |
| 134 | S&F modular switch piano flush type, single pole, one way and 5/6 Amp single module complete all as specified and directed. |
| 135 | S&F for modular switch piano flush type, single pole, one way, and 15/16 Amp single module complete all as specified and directed. |
| 136 | S&F modular socket outlet multipurpose having provision for 3 pin, 5/6 Amp and 2 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 137 | S&F modular socket outlet multipurpose having provision for 3 pin, 15/16 Amp and 3 pin, 5/6 Amp, 2 module piano flush type complete all as specified and directed. |
| 138 | S&F modular step type fan regulator 120 watt 2 module suitable for 230 volt 50 Hz AC supply complete all as specified and directed. |
| 139 | S&F bell push modular 6 Amps single module complete all as specified. |
| 140 | S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten/ slanting fittings complete all as specified and directed. |
| 141 | S&F bell electric ding dong type suitable for operation on 230 volt 50 Hz AC supply complete. |
| 142 | M&L for submain wiring with approved colour coding as per IS with two single core PVC insulated FRLSH cable with stranded copper conductor of size 6 Sq mm nominal area and drawing into suitable size of PVC non metallic rigid heavy duty PVC conduit of white/ ivory colour and its accessaries ISI marked heavy duty of suitable size including concealed in wall etc one run of PVC insulated with 6 Sqmm (nominal area) stranded copper conductor FRLSH cable as earth wire complete all as specified and as directed. Note:- Two runs of 6 sqmm cable, one run of 6 sqmm cable and one run of PVC conduit will be measured as one unit |
| 143 | S & F sheet metal enclosure MCB DB TPN 12 way vertical type with 200 Amps rated bus bar 415 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 144 | S & F sheet metal enclosure MCB DB SPN 8 way with 200 Amps rated bus bar 240 volts double door with magnitic locking system including necessary provision for inserting the DBs in wall by cutting the brick/stone masonary etc and making good of distrubed surface to match with existing colour of wall complete all as specified and directed. |
| 145 | S&F MCB tripple pole and neutral rated capacity 63 Amps, 415 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. |
| 146 | S&F MCB single pole and neutral rated capacity 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. |
| 147 | S&F MCB Single pole rated capacity 5 to 32 Amps, 240 Volts breaking capacity 10 KA, 'C' curve complete all as specified and directed. |
| 148 | S&F for metal clad box suitable for 230 volt 50 Hz AC supply three pin with MCB SP 20/32 Amps including removal of old unserviceable one complete all as specified and as directed complete all as specified and as directed |
| 149 | S&F LED tube light fitting 2 feet x 10 watts mirror type with high out put diffuser, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose to fitting complete all as specified and directed. |
| 150 | S&F energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opal diffuser pre wired with warranty option of 5 years from date of installation and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb complete all as specified and as directed. |
| 151 | S&F wall mounted LED tube light fitting 20 watts batten for surface mounted, anodized extruded aluminium housing, high transmissitivity diffuser, high lumen ouput box type fitting, 230 volts and intregrated electronic driver connector block etc with warranty option of 5 years from date of installation complete with all accessories internally pre wired and necessary mounting arrangements, provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting complete all as specified and as directed. |
| 152 | S&F energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 for security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 25 watts with pre wired and necessary mounting arrangements and provision of 2.5 sq mm three core copper conductor cable multi stranded from ceiling rose to light fitting including necessary dia GI pipe medium grade bracket 1.5 mtr long bend to required shape with clamps, nut, bolts complete all as directed. |
| 153 | Labour only for refixing of water heater storage type (Geyser) vertical/ Horizontal type obtained from item No. 123 above including 04 Nos of hold fashner nuts required suitable size fixed in brick wall, PVC connection pipe hot & cold complete all as specified and as directed. |
| 154 | Labour only for refixing the celing fan/ exhaust fan obtained from item No. 125 above with replacement of unsv 3 core PVC insulated PVC sheated 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal including over hauling the fan, painting of ceiling fans complete with two coats synthetic enamel paint by spraying including filling cavities with filler after cleaning all dust etc. complete all as specified and directed. |
| 155 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type of soil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted. |
| 156 | Supply and fixing LED luminaire 600 mmx600mm, 35/36 Watt, 220V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with dirver three core flexible copper conductor cases of suitable complete all as specified and directed. Supply and laying river bed fine sand in trenches/ ducts 15 cm under cable and 8 cm above the cable for cushioning / protection to cable including spreading, levelling and get thick 18cm after hand punning complete all as specified and directed at site. Please Enable Macros to View BoQ information |
