|
| 1 | Safe carriage, loading-unloading with proper stacking of following material from ESC-Daliganj to Work Site/JE -Dump Store – |
| 2 | 11/0.4 KV 250 KVA T/F |
| 3 | LT ABC (3x120+1x95+1x35) Sqmm |
| 4 | 11KV POLYMERIC PIN INSULATOR |
| 5 | ST Pole 11 Mtr long |
| 6 | LT PVC Cable 1x400/3.5x240 SQ MM CABLE |
| 7 | 11 KV 3x70 Sqmm XLPE Cable |
| 8 | 11KV O/DOOR Jointing Kit 3x70 SQ MM |
| 9 | PCC pole 8.5 mter long |
| 10 | 3 phase LT Distribution Box with Clamp |
| 11 | Safe carriage loading unloading with proper stacking of following material from JE dump store to work site. |
| 12 | 11/0.4 KV 250 KVA T/F |
| 13 | LT ABC (3x120+1x95+1x35) Sqmm |
| 14 | 11KV POLYMERIC PIN INSULATOR |
| 15 | ST Pole 11 Mtr long |
| 16 | LT PVC Cable 1x400/3.5x240 SQ MM CABLE |
| 17 | 11 KV 3x70 Sqmm XLPE Cable |
| 18 | 11KV O/DOOR Jointing Kit 3x70 SQ MM |
| 19 | PCC pole 8.5 mter long |
| 20 | 3 phase LT Distribution Box with Clamp |
| 21 | Construction of Distribution Pillar box made of MS Sheet (All the material will be arranged by the contractor). |
| 22 | fixing of 3 phase LT Distribution Box |
| 23 | Construction of Transformer Plinth |
| 24 | Construction of Fencing for 250 T/f |
| 25 | Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.. All material shall by supply by the contractor. |
| 26 | Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/neutral earthing (Earthing rod & earthing strip arranged by contractor). |
| 27 | Fabrication & erection of single pole for LT line on 8.5 M long PCC pole with fixing of necessary clamps & other acessories like clamp hook, dead/suspension clamp,neutral clamp,ABC pressure clamp (if required) and danger board with clamp.(all material arranged by contractor except steel & pole if required). |
| 28 | Fabrication and etection of S/S type double pole for 11 KV line on 11 Mtr long ST pole structure & installation, Commissining of 100/250 KVA T/F on double pole including jumpring with the system (All the required material for above job shall be provided by contractor except (T/Fs) |
| 29 | Placement of 11/0.4 KV T/Fs on S/S type installation, commissioning of 250 KVA T/Fs jumpering with the system ( All the required matrial for above job shall be provided by contractor except T/Fs) |
| 30 | Placement of 11/0.4 KV T/Fs from dump place to newly constructed T/Fs plinth & installation, commissioning of 250 KVA T/Fs of T/F Plinth and including jumpering with the system ( All the required matrial for above job shall be provided by contractor except T/Fs) |
| 31 | Hoisting, winding and jumpering of LT cable size 1x240/400 &3.5x240/400 sqmm between LT distribution box/fuse unit & constructed overhead line with proper lugging and clamaping. |
| 32 | Stringing, Sagging, winding and jumpering of LT line with AB Cable (3x120+1x95+1x16) conductor as per RESSPO Norms. (AB Cable provided by deptt and balance material like holding clamp, eye hook, suspension clamp and dead end clamp arranged by contractor .) |
| 33 | Supply & fixing of following material |
| 34 | Aluminium Crimping Lug |
| 35 | CU L-Piece |
| 36 | Henless fuse unit 500 amp 650 volts |
| 37 | Fixing of DO Fuse Set |
| 38 | Concriting of Pole |
| 39 | Painting of Pole |
| 40 | All taxes as applicable shall be paid time to time extra Please Enable Macros to View BoQ information |
