|
| 1 | Earth work in excavation in foundation, trenches etc. including dressing of sides and ramming of bottoms, including getting out the excavated material, refilling after laying pipe/ foundation and disposal of surplus excavated material at a lead upto 50m suitable site as per direction of Engineer for following depths, below natural ground / Road top level. 4.10..1 In all types soils/ saturated soil such as moorum, sand, sandy silt, clay, black cotton soil, kankar, etc. 4.10.1.1 Depth upto 1.5 m |
| 2 | Providing, laying and compacting plain/ reinforced cement concrete of specified grade in foundation/ levelling course/ pile cap using concrete mixer and vibrater complete including cost of form work, as per drawing and technical specifications and as per clause 1100, 1500,1700,2100 of MoRT&H specification including all scaffolding material, labour, machinery. 13.4.1 PCC Grade M -15 |
| 3 | Random rubble stone masonry work in cement mortar with mechanical mixer in foundation (at any level) complete as per drawing and technical specification and as per clause 1000 and 1400 of MoRT&H specification including all scaffolding material, labour, machinery but excluding pointing and plastering. 13.2.2 In cement mortar 1:4 (1 cement : 4 coarse sand) |
| 4 | Coursed rubble masonry (First sort) work in cement mortar 1:3 (1 cement : 3 coarse sand) with mechanical mixer in substructure/ super structure at all levels complete as per clause 1400 and 2200 of MoRT&H specification including all material, labour, scaffolding etc but excluding pointing and plastering. |
| 5 | Cement plastering including T&P, scaffolding, material and complete labour, including cost of water, curing, racking of joints etc. with 20 mm cement plaster of mix : 32.3.3 1:6(1 cement : 6 fine/ coarse sand) |
| 6 | Kota stone slab flooring 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4(1 cement : 4 coarse sand) : Area of each slab 900 to 2000 sqcm |
| 7 | Pointing on stone work with cement mortar 1:3 (1 cement : 3 fine sand) : 32.22.2 Raised and cut pointing |
| 8 | Reinforced cement concrete work in beams, suspended floors roofs having slope upto 15° landings, balconies, shelves, chajjaslintels, bands, plain window sills, staircases and spiral stair cases upto two stories excluding the cost of centring, shuttering, finishing and reinforcement: including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kg Cement up to 900 gms per cum of Concrete/ mortar 23.3.2 M-20 Grade Concrete (1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size) -As per design mix) |
| 9 | Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. upto two stories excluding cost of centring, shuttering, finishing and reinforcement : including Providing /mixing of synthetic fibers compulsorily complying with IS 16481:2022 of 06 mm/12 mm length to be mixed @ 0.25% by weight of Cement i.e. 125 gms per 50 kgh 23.2.2 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 |
| 10 | Stone work (machine cut edges) for wall lining etc. (veneer work) backing filled with a grout of 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing by means of cramps which shall be paid for separately) : 26.1.1 Red sand stone - exposed face fine dressed with rough backing, 26.1.1.1 70 mm thick. |
| 11 | Supplying and fixing machine cut dressed 75 mm Pink sand stone (Bansi Paharpur) dasa/ coping wth ornamental shape having moulding and \\"PAN Shape\\" engraving as per required pattern with engraving depth of 5 mm (average) in single piece of length 90 cm to be laid on cement mortar 1:4 (12 to 20mm thick) including pointing with admixture of pigment matching with the stone shade. |
| 12 | Supplying and fixing ashlar cantilever steps fine (3 lines |
| 13 | Distempering with oil bound washable distemper of approved brandand manufacture to give an even shade: 32.30.1 New work (two or more coats) over and including priming coat with cement primer |
| 14 | Structural steel work riveted, bolted or welded in built up sections trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer allcomplete: 50*50*6 |
| 15 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. 29.5.1 Using M.S. angels 40x40x6 mm for diagonal braces. |
| 16 | Providing & fixing door, window, chowkhats and other frames including anti termite treatment, M.S. flat, hold fasts of size 250 x 40 x 3mm fixed with M.S. bolt 5mm dia 50mm long duly embedded incement concrete M-15 grade 28.1.1 Second Class teak wood |
| 17 | Providing and fixing fully panelled/partly panelled/ double leaf shutter frame for doors as per approved design and drawings with approved ordinary C.P./ oxidised steel fittings as per Annexure - 'A' and width of styles & top rails of 100mm and lock rails width of 150mm and bottom rails of 200mm width including teak wood beading of size 19mm x 12mm on both faces complete 28.5.1 Nigeria wood grade I |
| 18 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes including black enamelled ISI marked M.S butt hinges with necessary screws 28.13.2 35 mm thick |
| 19 | Painting Steel work with Deluxe Multi Surface Paint to give an evenshade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture |
| 20 | Supply and fixing ashlar lintels and Dassa exposed horizontal and vertical faces 3 - lines fine dressed (bearing bed & top surface made perfectly even) Above 20 cm. thick & upto 2.15 m length (Pats.) (a)White Ashlar 26.10.1 Red sand stone |
| 21 | Reinforcement for R.C.C. work at all levels including straightening cutting, bending, placing in position and binding all complete 23.19.6 Thermo-Mechanically Treated bars |
| 22 | Centring and shuttering with plywood or steel sheet upto two stories ( each story of height upto 3.5 metre from floor level) including strutting, propping etc. and removal of form for : 22.1.3 Suspended floors, roofs, landings, balconies and access platform |
| 23 | 22.1.1 Foundations, footings, bases of columns, etc. for mass concrete. |
| 24 | Columns, Pillars, Piers, Abutments, Posts and Struts |
| 25 | Half brick masonry with FPS bricks of class designation 75 insuperstructure above plinth level upto two stories 24.12.1 Cement mortar 1 : 3 (1 cement : 3 coarse sand) |
| 26 | Construction of soakage well in all type of soil with 300 mm thick dry masonry, top and bottom 300 mm course in CM 1:6, 80mm thick stone slab, jointing of slab in CM 1 : 3, Ralthal, Kharanja, 40 mm thick M-15 grade C.C flooring , earthwork complete as per approved drawing including disposal of earth within a lead of 50 mtr.: 3.22.1 Size 300 Cm. dia outside & 300 Cm. depth . |
| 27 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required : 36.3.2 W.C. pan with ISI marked black solid plastic seat and lid. |
| 28 | Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). |
| 29 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. (Concealed work including cutting chases and making good the walls etc.,) 2.38.1 PN - 16 Pipe, 16 mm OD |
| 30 | PN - 16 Pipe, 32 mm OD |
| 31 | P&FPVCS torageTank ISI Marked (IS:12701) indicating theBISlicenseNo), of approved make with cover,25mm dia 1M longG.I. over-flow pipe & 25Cm. Long washout pipe with plug & socket, including making connection etc., complete of approveddesign: 2.26.3. 500 Ltrs capacity |
| 32 | P&F rigid PVC Pipe (IS:4985mark) class II/ (4Kg. /Cm2 .) approved quality /make including joining the pipe with solvent cement rubberring and lubricant 3.16.3 110 mm dia |
| 33 | Granite Black marble, 18 mm thick slab, above 1.0 sqm upto 2.0 sqm (areawise) |
| 34 | P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. wastepipe, dome waste couplings, concealed iron brackets or screws etc complete 11.14.2 Flat Back (large) or half stall size 610x400x80mm |
| 35 | P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall 1.3.5 Size 610 mm x 510 mm |
| 36 | P & F C.P. Brass flush Valve with C.P. flush bend of approved make. 1.35 Lever type with Elbow 32 mm dia |
| 37 | C.P. Brass bib cock,15mm nominal bore |
| 38 | C.P. Brass long body bibcock 15 mm |
| 39 | P & F Jet spray for water closet with C.P. Copper Tube flange ofapproved make |
| 40 | S&Ffollowing sizes(dia.)of ISI marked MMS(IS:9537P-III) vergin material PVC conduit as per PWD specification for electrical Works along with its accessories (IS:3419)as required inrecess icluding cutting the wall,covering conduit and making good the same as required .All relative and latest acceptance tests reports by any NABL accredited lab for the conduit shall be submitted before execution & All as per pre approved by Engineer incharge.For additional technical parameter so products/work,refer Annexure \\"A\\" attached with this BSR . E010410 MMS ( IS:9537 P - III ) PVC conduit, E010412 25 mm |
| 41 | 40 mm |
| 42 | Providing & Fixing of 240/415 V AC MCB with positive isolation of breaking capacity not less than 10 KA (B/ C tripping characteristic as per type of load and site requirement) 4KV impulse withstand voltage, as per PWD specification for electrical Works with ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947- 2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductorline load reversibility, label holding facility , IP 20 contact protection and fitted with existing distribution board/sheets, min. operation 20,000 upto 32 A rating and 10,000 upto 63 A, 5000 for 80 A rating including making connections, testing etc. as required. .OEM shall have submit NABL / CPRI / ERDA accrediated lab test reports before execution & All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , referAnnexure \\"A\\" attached with this BSR . Single pole MCB E060112 3 A to 5 A rating |
| 43 | Providing & Fixing of ISI marked (IS :3854) 16 amp. flush type non modular switch as per PWD specification for electrical Works, made out from industrial grade Polycarbonate or fire resistant ABS material, minimum width of switch toggle ( PUSH PART ) should not less then 18 mm, brass terminal & captive screws including cutting hole in tile and making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR |
| 44 | Supplying and drawing FRPVC insulated & unsheathed flexible copper conduct or as per PWD specification for electrica lWorks with ISI marked (IS:694)and as per IS 8130:2013 of 1.1k V grade.Wires hould be made from 99.99%purity copper,class 5 stranding in acc.to IEC 60228 for lower watt loss,oxygen free (<10ppm)for less chances of oxidization and higher silver content for gives better conductivity,insulation PVC type A,flame retardant as per IS 10810-53, better amperage rating as per VDE 0298 part 4,,in existing surface or recessed PVC /MS conduit/casing capping including all as per pre approved by Engineer in charge,making connections,etc.as required.OEM Must have its own in house NABL lab setup for all testing facilities for wires.For additional technical parameters of products/work,refer Annexure\\"A\\" attached with this BSR . E040102 2 x 1.5 sq.mm |
| 45 | Providing & Fixing of IP 20 SMD Mid Power LED batten type integrated light fixture made from polycarbonate/extruded aluminium powder coated housing within built driver,Power Consumption of 18W/20W, system lume nefficacy ≥120 lm/Watt output, internal surge protection of 2.5 KV with Short & Open circuit protection, THD<10%,p.f.≥0.95,CRI>80,life time of minimum 50000 Burning Hours with,70%of intial Lumenmaintaned tilll if eends,CCT3000°K/4000°K/5700°K/6000°K/6500°K(AsperANSIBin),maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate (T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing.OEM must have its own in house NAB Llab setup for all testing facilities for LED fixtures.(LM79/LM80)certificate/Report from OEM shall be submitted . All as per pre approved by engineer in charge.foe additiona ltechnical parameters of product/work,refer Annexure \\"A\\" attacheded with this BSR. E170201 4' LED Tube shape fixture 18/20 W (Polycarbonate Base) |
| 46 | Providing & Fixing of energy efficient direct fit (Retrofit)Polycarbonate/Extruded Al Base Housing & diffuser SMD Mid Power LED tube (with integral driver), on existing fixture. Power Consumption of 18W/20W system lumen efficacy≥110lm/Watt output, internal surgeprotection of 2.5KV, THD<15%,p.f.≥0.95,CRI>80,life time of minimum 35000 Burning Hours with,70%of intial Lumenmaintaned tilll if eends, CCT 3000°K/4000°K/5700°K/6000°K/6500°K (As per ANSIB in), maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate(T.C.).Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. E170301 4' ,18/ 20 Watt LED Tube Without Batten ( Polycarbonate base) |
| 47 | Providing & Fixing of energy efficient/energy saving direct fit (Retrofit)composite self ballasted compact fluorscent lamp(CFL)with PF>0.85 in existing holder/fixture as required complete in all respect.All as per pre approved by Engineer in charge.For additional technical parameters of products/work, refer Annexure \\"A\\" attached with this BSR . E170605 18/20 Watt |
| 48 | Providing and fixing of non modular power plug point accessories as per PWD specification for electrical Works with 18 SWGGI box of size 175x100x60 mm with earthing terminal/connect or on recessed/surface with suitable size phenolic laminated sheet (IS:2036-1995)cover including cost of 16amp.Switch (IS:3854)and 3/6pin 16amp. socket outlet [as per detailed in respective item in BSR],making connection,testing,etc.as required.All as per pre approved by Engineer in charge.For additional technical parameters of products/ work , refer Annexure \\"A\\" attached with this BSR |
| 49 | Supplying and Filling in plinth with blown sand under floors including watering ramming consolidating and dressing complete including cost of sand. Please Enable Macros to View BoQ information |
