Tender For Construction Of Jmfc Court Building At Damapada In The District Of Cuttack For The Year 2024 - 25, Cuttack-Odisha

TDR : 55962593

Tender Notice
BOQ

11 Days Left

Cuttack , Odisha

Tender Brief : Tender For Construction Of Jmfc Court Building At Damapada In The District Of Cuttack For The Year 2024 - 25

Document Fees
₹ 10000 /-

EMD
₹ 469496.0 /-

Tender Value
₹ 4.69 Crore /-

Submission Date
24-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Earth work in Excavation in hard soil or gravelly soil within 50m. Initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per the direction of the Engineer-in-charge.
2	I ) Foundation in hard soil or gravelly soil
3	II ) Foundation in Cutting of disintegrated rock not requiring blasting
4	Providing filling manualy with aproved quality sand in layers not exceeding 150mm thick including watering ramming to proper density with cost,conveyance,royalty,taxces of materials ,labour & T&P etc complete as per direction of Engineer-In-Charge.
5	Providing Cement Concrete (1:3:6) with 40mm size clean hand broken granite metal of approved quality from approved quarry including hoisting lowering & levelling in position ramming using vibrator to proper slope and levelling with cost conveyance taxes royality, labour of all materials and including hire & running charges of machineries T&P required for the work including supplying & cess as per the specifiction and direction of Engineer-in- charge (Crusher Broken )
6	Providing and laying Reinforced cement concrete of M-25 grade with 20mm and down grade black hard granite of controlled quality having a minimum compressive strength (in work test) of 250Kg/Cm2 in 15cm cubes at 28 days after mixing and tests conducted in accordance with IS 456 and IS 516 with strength of approved quality and from approved quarry including hoisting, lowering, laying and compacting concrete, watering and curing for 4 weeks, centering shuttering & finishing the exposed surface smooth with cost, conveyance royalitteis and taxes of all materials and labour with T&P & cess required for the work etc. complete in all respect as per the specification and direction of Engineer-in- charge.
7	A) Column Base
8	B) Plinth Beam
9	Column / Beam
10	A) Ground Floor
11	B) First Floor
12	Lintel
13	A) Ground Floor
14	Chajja
15	A) Ground Floor
16	R.C.C. Shelves/Fins
17	A) Ground Floor
18	Stair Case
19	A) Ground Floor
20	Roof Slab
21	A) Ground Floor
22	B) First Floor
23	Drain Bed
24	Drain Side Wall
25	Cover Slab
26	Straightening bent up or coiled rods cutting bending,binding, cranking hooking, welding jointing (if required) the M.S.Rods or Tor steel & binding wires and binding tying the grills hoisting lowering & placing in proper position as required for RCC works with cost conveyance & taxes of M.S. Rods or Tor steel & binding wires of 18 to 20 gauge and labour with all T&P required for the work with cess etc,complete in all floors (weight of binding wire will not be considered for payment and payment will be made on weight of M.S. Rods or Tor steel only) etc. in all respects as per the direction of Engineer-in-Charge.
27	A) Ground Floor
28	B) First Floor
29	2.5 cm thick grading concrete (1:2:2) on roof slab with 6mm size hard granite chips. On new work with all taxes royalties & cess etc, complete as per direction of Engineer-in-charge.
30	A) Ground Floor
31	Fly Ash brick masonary in Cement Mortar (1:6) in foundation/Superstructure using-Fly Ash.-brick of 25cm X 12cm X 8cm size having a crushing strength in between 75kg to 100 kg per Sq.cm with dimensional tolerance ± 8% including splays cutting circular moulding chamfering & corbelling watering and curring for 7days after immersing the bricks in water for six hours before use etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge.
32	A) Foundation & Plinth
33	Superstructure
34	B) Ground Floor
35	C) First Floor
36	D) Second Floor
37	16mm (5/8\\") thick cement plaster in C.M. (1:6) finished smooth to inside surface of 9\\" thick brick wall after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and labour with T&P required for the work with all taxes, royalties & cess etc, complete in all floor as per direction of Engineer-in-charge.
38	A) Ground Floor
39	B) First Floor
40	12mm (1/2\\") thick cement plaster in C.M (1:6) finsihed smooth to out side brick walls after racking out the joints including watering & curing for seven days with cost and conveyance of all materials and laobur with T&P required for the work with all taxes, royalties & cess etc, complete in all floors as per direction of Engineer-in-charge.
41	A) Ground Floor
42	B) First Floor
43	Supplying ,fitting and fixing vitrified tile in floors Tile 1200mmx 600mm size of approved shade and make (Single Charge) confirming to IS: 13755 laid on 20 mm thick cement mortar (1:4) ( 1 cement : 4 course sand ) and filling the joints with white cement of approved quality including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
44	A) Ground Floor
45	Supplying ,fitting and fixing Vitrified industrial floor Tile of premium grade having thickness 8mm to 10mm , 300mmx 300mm size of approved shade and make (Single Charge) confirming to IS: 4457 laid on 20 mm thick cement mortar (1:4) ( 1 cement : 4 course sand ) and filling the joints with white cement of approved quality including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
46	A) Ground Floor
47	Fixing Vitrified tiles in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigments to match the shade of the tiles including rubbing and polishing complete excluding cost of precast tiles. including cost of all materials , labour T & P etc. required for the work complete as per direction of Engineer-in-charge.
48	A) Ground Floor
49	Providing, supplying and fitting and fixing of M.S. Door / Window shutters, gates & M.S. grills as per approved design etc. complete.
50	A) Ground Floor
51	B) First Floor
52	Providing fitting fixing W.I. Clamps for doors and windows including of all cost conveyance etc complete. as per the specification and direction of Engineer-in-charge.
53	A) Ground Floor
54	B) First Floor
55	Supplying and fixing of Roller blinds by fixing powder coated top channel, bottom channel with bottom end cap, control unit and good quality of 0.60 mm thick fabric of approved design and quality etc. complete. as per the specification and direction of Engineer-in-charge.
56	A) Ground Floor
57	Dressed seasoned sal wood work framed and fixed (wrought and put up) in trusses, purlines, frames of doors, windows, ventilabours and beams with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including cess as per the specification and direction of Engineer-in-charge.
58	A) Ground Floor
59	B) First Floor
60	32mm thick piasal wood or local teak wood fully glazed shutters complete with iron fitting and wooden hinged cleats etc., fitted and fixed in position including all labour, but excluding the cost of glass panes and iron fittings with cost, conveyance taxes royalty labour of all materials and including hire and running charges of machinaries T&P required for the work including cess as per the specification and direction of Engineer-in-charge.
61	A) Ground Floor
62	B) First Floor
63	Providing & fitting,fixing all Fittings (Aluminium) such as Handle ,Aldrop ,Tower bolt , Hinges.....etc. to the frames of doors, windows, ventilabours etc complete with cost,conveyance & taxes of all materials & labour with T&P required for the work in all respect as per specification & direction of the Engineer-in-charge.
64	F )Door closer (brass)
65	Supplying, fitting, fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD.) Ventilator / Top Hung - 60 - Series duly manufactured using UPVC reinforced profiles of 60mm x 55mm x 2.5mm for outer frames, 75mm x 60mm x 2.25mm for casement window sash profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 1.5mm prefabricated & welded through fusion welding the window sash shall be fitted with 6mm thick clear toughened glass of SAINT-GOBAIN make duly fixed with EPDM weathering seal resistant accessories like clipping locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing / deglazing at site etc. including cost and conveyance of all materials, accessiries, labour charges, materials and product conforming to ASTM D 638-14, EN-477-95 and other applicable codes and standards.
66	A) Ground Floor
67	B) First Floor
68	Finishing wall surface of walls with Acrylic wall putty (Water based ) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with cost of all materials taxes, labour T&P etc complete as per the specification and direction of Engineer-in-charge.
69	A) Ground Floor
70	B) First Floor
71	C) Second Floor
72	Wall painting 2 coats with plastic emulsion paint of approved shade over one coat of primer including cost of paint , scaffolding ,staging & cost of all materials , labour etc.complete as per direction of Engineer-in-charge.
73	A) Ground Floor
74	B) First Floor
75	Wall painting two coats with any approved quality of Weather seal coat over one coat of Primer with any approved shade including cost of paint on New Plastered surface of approved make and finished smooth and even surface to receive painting including cost of scaffolding ,staging including cost of all materials , labour etc.complete.
76	A) Ground Floor
77	B) First Floor
78	Painting two coats in all floors to new iron work over a coat of primer including sand papering,polishing the surface,including cost conveyance royalties and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge.
79	A) Ground Floor
80	B) First Floor
81	French polishing to wood work 2 coats in all floors to new wood work including sand papering , polishing the surface, cost conveyance and all taxes of all materials alongwith T&P required for the work including cost of paint & primer complete in all respect as per the direction of Engineer in Charge.
82	A) Ground Floor
83	B) First Floor
84	Supplying, fitting afixing of stainless steel of 304 grade in hand railing using 50mm dia of 2mm thick circular pipe with Balustrade of size 32mm x 32mm @ 0.90mtr. C/C and stainless square pipe bracing of size 32mm x 32mm x 2mm in 3 rows in stair case as per approved design and specification, buffing, polishing etc. with cost conveyance, taxes of all materials labour, T&P etc. required for the complete in all respect.
85	Providing and fixing 100 mm dia PVC rain water down pipe with necessary bend shoes and heads etc. 1 mtr long with all cost of labour and materials etc. complete.
86	A) First Floor
87	Providing and fixing false ceiling (12.5mm Gypsum Board ) at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :Providing fitting, fixing of false ceiling with Aluminium anodized T section No-3215 with 2'-0\\" center to center ,L section No-1705 upto 15 micron on 4 walls to be fixed bu means of steel screw and P.V.C. plug and the Aluminium grid 2'-0\\" x 2'-0\\" with Gypsum board suspended from ceiling etc compiete . including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete in all respects as per the direction of Engineer-in-Charge.
88	A) Ground Floor
89	I )12.5 mm thick Gypsum board false ceiling
90	II )12.5 mm thick Gypsum board corner pcs
91	Providing and fixing of Double skin wall paneling made of aluminum anodised section framing conforming to standard Aluminium sections as horizontal and vertical members with atleast 600mm c/c with 9mm thick BWR block ply and 4mm thick veneer finished with melamine polished on both the faces complete including all cost of labour, T&P, hire charges of drilling machine, labour charges etc. complete in all respects as per the direction of Engineer-in-Charge.
92	A) Ground Floor
93	Filling in foundation and plinth with excavated materials including watering ramming to proper density with cost,conveyance, taxes of all materials and cost of all labour & T & P as required for the item of work including cess etc complete as per specification & direction of Engineer-in-charge.
94	Construction of embankment with approved material obtained from borrow pits with all lifts and leads, transporting to site by mechanical means within a lead of 5kms, spreading, grading to required slope and compacting to meet requirement of table 300-2 & Clause 305 of MoSRT&H Specifications for Road & Bridge works(4th Revision) including hire and running charges of Roller and all other machineries , cost, conveyance & royality of materials , T&P and Cess required for the work etc complete as per specification & direction of Engineer-in-Charge.
95	Cement concrete (1:2:4) with 12mm size broken hard granite chips for including hoisting and lying per 1cum etc. complete including cost & conveyance of all materials & labour required for the work with all taxes & royalties with all T&P & cess etc, complete in all respect as per the direction of Engineer-in-charge.
96	Providing & laying 60mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
97	Providing & laying 80mm thick factory made cement concrete interlocking paver block of M-35 grade made by block makine machine with strong vibratory compaction of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge.
98	Supplying, fitting and fixing of 750mm high table for lawers made out of 19mm thick BWR plywood finished with 4mm thick natural wood veneer of approved make and shade with melamine polish (PU glossy polish) including cost of all materials, cost of labour, conveyance, taxes, hardware fittings, etc. all complete.
99	Supplying, fitting and fixing of 750mm high Dias table with provisions for drawer and shelves made out of 19mm thick BWR plywood finished with 4mm thick natural wood veneer of approved make and shade on exposed surface with melamine polish (PU glossy polish) and 1.0mm thick high pressure laminates on inner surface including cost of all materials, cost of labour, conveyance, taxes, hardware fittings, etc. all complete.
100	Providing, fitting and fixing of 100mm thick and 1200mm high ply wood double skin partition made out of 19mm thick BWR ply wood as frame member and 12mm thick BWR ply wood as skinning member fixed by means of nail and adhesive finished with 4mm thick natural wood veneer both side with melamine polish (PU glossy polish), etc. including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc. all complete.
101	Providing, fitting and fixing of 100mm thick and 750mm high ply wood double skin partition with 450mm wide platform made out of 19mm thick BWR ply wood as frame member and 12mm thick BWR ply wood as skinning member fixed by means of nail and adhesive finished with 4mm thick natural wood veneer both side with melamine polish (PU glossy polish), etc. including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading,T&P, etc. all complete.
102	Providing, fitting and fixing of 100mm thick and 600mm high ply wood double skin partition with 300mm wide platform made out of 19mm thick BWR ply wood as frame member and 12mm thick BWR ply wood as skinning member fixed by means of nail and adhesive finished with 4mm thick natural wood veneer both side with melamine polish (PU glossy polish), etc. including the cost of all materials, cost of labour, conveyance, taxes, loading, unloading, T&P, etc. all complete.
103	Supplying, fitting and fixing of 375mm wide and 375mm high Sit Out with cussion made out of 19mm thick BWR plywood finished with 4mm thick natural wood veneer of approved make and shade with melamine polish (PU glossy polish) including cost of all materials, cost of labour, conveyance, taxes, hardware fittings, etc. all complete.
104	E.I. Works
105	Wiring
106	Recessed wiring to light point with 1.5 sq.mm FR PVC insulatedsingle core multistrand copper conductor of ISI marked with 20 mm dia non-metalic PVC flexible conduit with 5Amp, 250 V piano type modular switch ISI marked and ceiling rose ISI marked mounted on MS box having front Modular base & cover of suitable size , MS box with 1 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accesories and connection as per direction of Engineer in Charge. ( Make of wire Finolex/ L&T / Anchor / Havels /HPL/ V Guard )
107	Group A
108	-do- Group B
109	-do- Group C
110	Recessed wiring to Fan Point in...
111	do- Group B
112	-do- Group C
113	Recessed wiring to Call Bell Point in...
114	-do- Group C
115	Recessed wiring to Exhaust Fan Point in…..
116	do- Group B
117	S/F of fan hook 'S' type made of 16 mm MS rod for fixing in the Existing RCC Roof.
118	S/F of Angle holder replacing Ceilling Rose
119	Swich Boards
120	S/F of 5A. Modular Switch & 5A. Modular Socket outlet of ISI marked on existing board
121	S/F of extension board of 4 modular Metal box with modular base & cover in recess including providing and fixing of 1 nos of 3pin 5/6amp modular socket out let & 1 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
122	S/F of extension board of 6 modular Metal box with modular base & cover in recess including providing and fixing of 2 nos of 3pin 5/6amp modular socket out let & 2 nos of 5/6 amp piano type modular switch, connection, painting etc as required.
123	S/F of Power point with 4 modular metal box with modular base & cover in recess including providing and fixing of 5 pin 15/16 amp. piano type Modular switch & Socket, connection, painting etc as required
124	S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch complete with wiring on 12 modular M.S. box with modular cover.
125	S/F of computer board consisting of 3 nos of 5amp modular plug and modular switch & 1 no of Mini MCB complete with wiring on 12 modular M.S. box with modular cover.
126	S/F of 18 SWG Modular metal box of following sizes (Nominal size) in recess with suitable size of Modular base & cover in front including cutting the wall and making good the same in case of recessed conduit as required.
127	2 Modular box with base & cover
128	4 Modular box with base & cover
129	6 Modular box with base & cover
130	8 Modular box with base & cover
131	12 Modular box with base & cover
132	Sub-Main
133	Wiring for circuit / sub-main wiring along with earth wire with following sizes of PVC insulated single core multistrand copper conductor with ISI marked conforming to IS-694/1990 in 20mm dia non metalic heavy duty flexible conduit 1.6mm in recessed PVC conduit as required (Make of wire - Finolex/L&T/Anchor/Havels/V-guard)
134	2x1.5+1x1.5 (1.8.1)
135	2x2.5+1x1.5 (1.8.2)
136	2x4+1x1.5 (1.8.3)
137	4x6+2x2.5(1:8:10)
138	4x10+2x4(1:8:11)
139	Inverter wiring (1x2.5smm) Copper wire (1.19.11a)
140	Circuit Breakers
141	S/F of 'C' series 4P MCB of 63A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box
142	S/F of 'C' series 2P MCB of 32A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box
143	S/F of 'C' series SP MCB of 10/16A amp rating (As per direction of engineer in charge) 440Volt for lighting and other loads in the existing MCB Distribution board ISI marked complete with connection, testing and commissioning etc. as required without MCB box
144	S/F of 4Way (8+12) TPN Double Door Distribution Board ISI marked complete with all accessories and connection etc. as required (Make : Legrand / Hager / Scheider / Seimens)
145	S/F of 6 way (6+18) TPN MCB DB double door (Analysis Attached)
146	Earthing
147	S/F of Cu .Earth Plate Earthing 600 mm x600mmx3.15mm with Salt & Charcoal for Earth electrode (3:5)+(3.6)
148	S/L of 25mm x 5mm Cu. earth strip in 40 mm dia G.I.Pipe(3.11)
149	Fittings
150	Supply and fixing of 300mm Exhust fan with all accessories and connections (Make:Usha-Aero Clean Plus DBB/Crompton- Trans Air 12\\" reversiable /Havells-Venti Air DS (HS)/Anchor- Anmol delus R/Orient-Power Flow DBB// Pollycab -Fresh on DBB )
151	S/F of Call bell/Buzzer(Ding dong type) ISI marked suitable for DC/AC single phase 230 volts complete as required. (1.30)
152	S/F of 18-25Watt L.E.D Tube light fitting with all accessories and connections (Make:HPL/ Havells/PAC/Crompton/Polycab)
153	Supply and fixing of 1200mm A.C. Ceiling fan (5 star) 28 watt BLDC with all accessories and connections with out fan regulator (Make:Usha-Techinix ISI /Crompton- Energion Groove/Havells-Efficiencia Neo/ Anchor- Eco Breeze Urban/Orient-Eco Tech Supreme/ Pollycab -Affeciente Neo )
154	S/F step type modular fan regulator
155	S/F of 10w Watt LED Bulb
156	Supply and fixing of 45-48 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )
157	Supply and fixing of 60 Watt Single LED Street Light Fitting with LED & Electronic driver with all accessories and connections ( Make- Crompton/Phillips/HPL/Polycab/Havells )
158	S/F of 24 watt LED recessed (Round / Square) shape Ceiling light fitting compoete with all connection.\ including fixing and all accessories as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
159	S/F of 2T 3Star split type AC Machine including G.I. Stand for outdoor unit (Make-Carrier/Voltas/Hitachi)
160	S/F of 5KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard
161	S/F of 1.5T 3Star split type AC Machine including G.I. Stand for outdoor unit (Make-Carrier/Voltas/Hitachi)
162	S/F of 4KVA Automatic Voltage Stabilizer(130-300V), Make-Microtech/V-Guard
163	S/F of PVC hard drainage pipeline system.
164	6sqmm 3 core copper round cable
165	S/F of 15Amp Top
166	S/F of extra copper cooling pipe with insulation packing and round flexible cord for power supply
167	S/F of 2250 VA/24V Inverter with 2 nos. 180Ah battery including trolley arrangement (Make: V-Guard/ Microtake/ Luminous
168	S/F of 12W LeD Squre / Round Panel light (Havels/crompton/philips/panasonic)
169	S/F of 15W LeD Squre / Round Panel light (Havels/crompton/philips/panasonic)
170	S/F of 18W LeD Squre / Round Panel light (Havels/crompton/philips/panasonic)
171	S/F of Partico Light with 18 watt LED light fitting complete with all connection as per direction of Engineer-In-charge (Make: Havels / Phillps / Crompton / Polycab / HPL)
172	S/F of 15A socket on 2Modular Board board for A.C
173	S/F of 25A Moter Starter switch for A.C (Make: Havells / Anchor/Le-Grand)
174	Cables
175	Provision of Armoured cable size 3 1/2 x 25sqmm (24)
176	Provision of Armoured cable size 3 1/2 x150sqmm (30)
177	Laying of MV cable above 120sqmm to 400 sqmm in ground (5.1.3)
178	Laying of MV cable above 120sqmm to 400 sqmm in surface(5.5.3)
179	Panels
180	Supply & fixing of 250 A TPN Panel board 1. 125A MCCB (Make- Legrand/Seimens/L&T/C&S/) 1No.2. 63 A 4P MCB (Make- Legrand/Seimens/L&T/C&S/)- 4no 3. TPN Busbar-2set with DC Gland for 25mmsq aluminium armoured cable and 4Pole Spreaders link (63A-200A)4. 200Amp 4P Changeover-1No.5. Digital Volt meter & Ameter three phase 6. All accesories & Connection (Rating & Danger borad)
181	P.H. Works
182	100user septic tank
183	Earthwork in all kinds of soil in excavation of foundation trenches within 50m initial lead and 1.5m initial lift including rough dressing and breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.30m in depth etc all complete as per direction of the E.I.C.
184	Initial lift upto 1.5 mtr
185	From 1.5 mtr to 3.0 mtr depth
186	Supplying all materials, labour, T&P and filling in foundation and plinth with river sand well watered and rammed including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per the direction of the E.I.C.
187	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 40mm H.G metal including watering, curing and conveyance of all materials to site payment of royalry, taxes etc all complete as per P.H specification and direction of the E.I.C.
188	Supplying all materials, labour, T&P and providing plain cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
189	Supplying all materials,labour, T&P and providing Brick work with K.B.Brick having crushing strength not less than 75 Kg/CM2 with dimensional tolerence of +/- 8% in C.M including watering, curring, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
190	In Foundation and Plinth in C:M (1:3)
191	In Super Structure in C:M (1:6)
192	Supplying all materials, labour, T&P and providing cement plaster on brick/stone work including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
193	20 mm thick C.P in C:M (1:3)
194	12 mm thick C.P in C:M (1:3)
195	Supplying all materials, labour, T&P and providing cement punning on plastered surface including watering,curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
196	Same as item 20mm C.P in 1:3 =
197	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for RCC work including false work and dismantling then after casting including conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
198	Supplying all materials, labour, T&P and providing M.S.reinforcements for RCC work including cutting, bending, binding, straightening and tying the grills and placing in position including cost of binding wire 18 to 20 gauge conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
199	Supplying all materials, labour, T&P and providing reinforced cement concrete (1:1.5:3) with 12mm size H.G chips including watering, curing and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
200	Supplying all materials, labour, T&P and making M.S. Step Iron in 20mm Dia M.S Steel bars and fixing into walls of Manhole/ Septic Tanks duly embeded in C.C(1:2:4) etc all complete as per P.H specification and direction of the E.I.C.
201	Supplying all materials, labour, T&P and providing 50mm thick pre-cast R.C.C. baffle wall in R.C.C(1:1.5:3) including reinforcement cage using 12mm size HG chips fitted and fixed in position, finished smooth etc. complete including cutting grooves and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
202	Supplying all materials, labour, T&P and providing 160mm dia P.V.C Tee inside the septic tank including cutting holes and duly embeded in P.C.C(1:1.5:3) using 12mm size HG chips fitted and fixed in position and mending good the damages etc all complete as per P.H specification and direction of the E.I.C.
203	Supplying all materials, labour,T&P and providing 12mm thick cement flush pointing in C:M (1:3) to Brick Masonry works including watering curring and conveyance of all materials to work site, payment of royalty, taxes etc all complete as per P.H specification and direction of the E.I.C.
204	Supplying all materials, labour,T&P and filling Foundation and Plinth with excavated earth including watering, ramming etc all complete as per direction of the E.I.C.
205	Factory made FRP(alternately called GRP) door frame of size 75mmx100mm fabricated using E-glass Chopped Strand Mat (CSM) U.V stabilised Inopthalic Gelcoat and impregnated with Inopthalic resin. The thickness of the GRP skins shall not be less than 2.00mm. The door frame consist of four segments which are provided with plug-in-socket arrangement in-situ in the mould. The segments are plugged in and are joined together by means of screw. The GRP frame shall be provided with wooden reinforcement on six locations for high screw holding capacity for for fixing metallic hold fast and shall be consolidated by filling with medium density foam/plaster of paris with fibre reinforcement, Six numbers of 260mm x 25mm x 5mm size 'S' shaped M.S flat hold fast shall be provided with the frame. The material and process for manufacturing the door frames shall conform to RV-TIFAC composites Design Centre's standards and specifications. The finish of door frame will be plain colour white/ Ivory/ Beige/ Light grey/ Golden brown/Mahogany/ Teak wood/sand stone/Champagne/Pastel blue or any other colour using high quality pigments complete in all respect as per specification and direction of the E.I.C
206	Factory made single leaf rigid FRP(alternately called GRP) sandwich composite door shutter of 32mm thick laminated with two GRP skins with wood grain finish fabricated using UV-stabilised Isopthalic Gel coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopthalic polyester resin. The thickness of the skins shall not be less than 1.50mm Expanded Polystyrene(EPS) structural foam panel of 29mm thickness and a density of 20kg/cu.mtr shall be used as core material. Wooden reinforcements made of seasoned sal wood block of cross section not less than 28mmx32mm and also necessary sal wood reinforcements for fitting the metal fittings such as tower bolts, aldrops, handles etc shall be provided. A structural adhesive compatible with (EPS) foam shall be used for bending the core material, the sal wood reinforcements and the skins. The material and process for manufacturing the door shutters shall conform to RV-TIFAC composites Design Centre's standards and specifications and the door shutters tested in conformation to IS: 4020-1998. The finish of door shutter will be plain colour white/ Ivory/ Beige/Light grey/ Mahogany/Teak wood or any other colour using high quality pigments. Three heavy weight mild steel butt hinges type-I(ISI marked) size 100mm are to be fitted on one side of shutter.
207	Supplying all materials labour T&P and fixing porcelain glazed tiles/Marble tiles /Kota /Kodappa tiles in walls / dados skirting on 12mm thick cp (1:3) jointed with neat cement slurry mixed with pigments to match the shades of the tiles including rub bins and polishing complete as per direction of EIC.
208	Ground Floor Wall
209	Supplying all materials labour T&P and fixing Ceramic tiles in floors. Treads and landing on 25mm thick bed of cement mortar (1:1) joined with neat cement slurry mixed with pigments to match the3 shades of the tiles including rub bins and dir of EIC. Ground Floor
210	Supplying all materials labour T&P and providing painting two coats with approved cement paint on plastered surface etc. all compt as per specification and direction of EIC.
211	Supplying all materials labour T&P and cutting holes through brick/stone masonry works including making good the damages in cm (1:4) for taking H.C.I/PVC pipes and fittings etc. all complete as per PH specification and direction of EIC.250mm thick wall
212	375mm thick wall
213	Supplying all materials, labour, T&P and cutting holes through brick/stone masonary works including making good the damages in c.m. (1:4) for taking P.V.C. pipes & fittings etc. all complete as per P.H. specification and direction of E.I.C.
214	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking G.I./P.V.C. pipes and making good the damages as per direction of the E.I.C.
215	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x30mm footrest, fixing 100mm dia HCI 'p' or 's' trap (with/without 50mm dia horn) for water colset squatting pan including jointing the trap with pan in cement mortar (1:1) cutting the floor and mending good the damages , cost & conveyance of all materials to worksite, payment of royality , taxes etc. all complete as per P.H specification and direction of the Engineer-in-charge.580mm size Orissa pan (Hindware/Parryware/Neycer/Cerramake)
216	Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra).Wall mounted water closet (Parryware)
217	Supplying all materials, labour T&P and fixing Wash Down Water Closet(Europeon type W.C. pan) with Integral ‘S’ trap to the floor with wooden plug and C.P.screws including jointing the trap with soil pipe in C.M.(1:1) etc. all complete as per specification & direction of E.I.CE..W.C. with ‘S’ trap plain(Neycer/ Parry ware/ Cerra).
218	Supplying all materials, labour, T&P fitting and fixing Plastic Seat and cover for E.W.C. with chromium plated brass hinges and rubber buffers all complete as perr specification and direction of E.I.C. (Neycer/ Parry ware/ Cerra)
219	Grab bar 692 mm long (WAC - SAP - BR 0600CS )
220	Supplying all materials, labour, T&P and fixing glazed earth ware squatting plate size (450 x 350 mm with integral longitudinal flushing pipe including embedding the plate in 25 mmC.M (1:8) laid over 150 mm C.C (1:4:8) using 40mm h.g metal etc all complete as per specification and direction of the E.I.C.Squatting Urinal (Ladies) ( Nycer / Cirra / Parryware /Hindware)
221	Supplying all materials,labour,T&P and fixing Flat back lipped wall (Mini stall urinal -630mmx180mm) urinal of the following sizes including connecting the urinal with 32mm. dia pvc waste pipe 910mm. long by means of white lead mixed with chopped hemp, fixing 32mm. dia CP dome waste, 15mm. dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc. all complete as per specification and direction of the Engineer in charge Half stall urinal
222	Cost of 15mm dia urinal spreader
223	Supplying all materials,labour, T&P and providing marble slab in urinal partition wall including cutting grooves in wall and making good the damages including watering curing etc as per specification and direction of the E.I.C
224	Supplying all materials labour T&P and fitting & fixing UPVC SWR soil waste ventilating pipes and fittings of the following OD conforming to ISI No.13591/1992 to walls with nails bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method as per manufacturers specification testing e. w. in excavation in all kinds of soil and refilling of trenches as per direction of EIC 110mm dia UPVC SWR Pipe with rain water piping (.Ashirvad / Supreem / Oriplast / Hariplast)110mm dia UPVC SWR Pipe
225	160mm dia UPVC SWR Pipe
226	110mm dia U-PVC S. Trap
227	110mm dia U-PVC P. Trap
228	110mm U-PVC S/J with Door
229	110mm U-PVC door bend
230	110mm dia U-PVC Plain bend
231	110mm U-PVC Plain Tee
232	110mm U-PVC Cowl
233	125mm dia CP Grating
234	75mm dia U-PVC SWR Pipe
235	75mm dia U-PVC Plain Tee
236	75mm U-PVC Door Bend
237	75mm U-PVC Plain Bend
238	Supplying all materials labour T&P and fixing wash basins with hole for pillar taps with CI/MS brackets painted white including holes in walls and making good the damages etc .all compt. As per PH sp. And dir. Of EIC including all pipe connection .550x400mm WHB-(Hindware / Paryware/Nycer/ cerra )
239	Pedestral 550x400mm WHB
240	Supplying all materials labour T&P and fixing mirror of superior glass mounted on 6mm thick AC sheet or plywood sheet and fixed to wooden plugs with cp screws and washers compt. As per PH specification and direction of EIC.Rectangular Plastic Frame Mirror Good quality
241	Supplying all materials labour T&P and fixing standard size cp towel rail/ring compt. with cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC.CP Towel rail (20x600) heavy Stainless steel with Jaquar make
242	CP Towel ring heavy Stainless steel with Jaquar make .
243	Supplying all materials labour T&P and fixing standard size cp soap holder compt. With cp brass brackets fixed to wooden plugs with cp screws as per PH specification and direction of EIC Stainless steel with heavy good quality
244	Supplying all materials, labour T&P and fitting and fixing C.P shower with 15mm or 20 mm inlet with C.P shower arm including polishing all complete as per P.H. specification and direction of EIC 15mm dia cp shower (Jaquar make) (Shower+Arm)
245	Supplying all materials, labour T&P and fitting and fixing Acraylic shelf including polishing all complete as per P.H. specification and direction of EIC. 450mmx125mm size Plate Acraylic Shelf with heavy good quality
246	Supplying all materials labour T&P and fitting and fixing 10 ltr capacity low level flushing cistern with a pair of cast iron or m.s. brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float, c.p. brass handle, unions and couplings for connection with inlet, outlet and overflow pipes, 32mm dia cp foush bend, 15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting inlet pipe with supply main etc. all complete as per specification and direction of EIC. 10ltr Capacity Cistern ( Hindware / Paryware/Nycer/ cerra )
247	Supplying all materials labour T&P and constructing gully trap chamber of the following inside size with 8cm thick RCC precast cover slab in cc (1:1.5:3) using 12mm size hg chips foundation concre3te(1:3:6) using 40mm size hg metal on bed and around trap FLY ASH Brick work in cm (1:6) in F&P and inside 12mm thick cp (1:3) finished with a floating coat of neat cement including fixing 100mm size HCI gully trap and grating etc. all complete as per approved drawing specification and dir of EIC.Inside size 250mmx250mm gully trap
248	Supplying all materials, labour T&P and construction of Inspection chamber of the following sizes with c.c.(1:3:6) using 40mm size hg metal on bed, FLY ASH Brick work in cm(1:6) moulding and shaping the channel inside and benching with c.c. (1:1.5:3) with punning to inside cement flush pointing (1:3) to outside RCC cover slab in cc (1:1.5:3) using 12mm size hg chips with RCC m. h. cover, e. w. in excavation in all kinds if soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to site payment of royalty taxes etc. all complete as per approved specification and direction of EIC.Inside size : 760 x 760 x 460mm Inspection Chamber
249	Supplying all materials, labour, T&P and constructing Manhole Chamber of the following sizes with cement concrete (1:3:6) using 40 mm size HG metal on bed, 1st class KB Brick work in CM (1:6) moulding and shaping the channel inside and benching with C:C (1:1.5:3) using 12 mm size H.G chips, 12 mm thick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in C.C(1:1.5:3) using 12 mm size H.G chips with RCC man hole cover, earth work excavation in all kinds of soil and refilling the cavity around the camber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc. all complete as per approved specification and direction of E.I.C 910mm x 910mm x 910mmm Manhole chamber
250	Supplying all materials labour, T&P and constructing soak way pit of the following sizes with precast RCC rings joined loose gravel backing in the rear of well staining, precast RCC cover slab in c.c. (1:2:4) USING 2mm size hg chips fitted with iron lifting handles including e. w. in open well excavation in all kinds of soil and refilling the cavity around the pit and painting the iron works watering, curing, conveyance of all materials to work site payment of royalty, taxes etc. all complete as per approved drawing, specification and direction of EIC.1.22m dia x 2.10m deep
251	Supplying all materials labour T&P and construction soak way pit of the following sizes with dry brick walling from bottom upto invert of inlet pipe and FLY ASH Brick work in cm(1:6) for the remaining height at top 12mm thick cp (1:4) inside and outside over masonry brick work gravel packing the rear of well staining RCC cover slab in c.c. (1:1.5:3) using 12mm size hg chips fitted with iron lifting handles including e.w. in open well excavation in all kinds if soil and refilling the cavity around the pit and painting the iron works, watering, curing, conveyance of all materials to work site payment royalty, taxes etc. complete as per approved drawing specification and direction of EIC. 1.20m dia x 2.00m deep soak way pit
252	Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing
253	Supplying all labour materials T&P and laying of UPVC soil waste pipe of the fo0llowing internal diameter confirming to IS in trenches of the depth upto 1.2mtr including jointing with supply of approved rubber, lubricant by non heat application method on bending with 150mm thick cc (1:3:6) using hg metal of 25mm to 40mm and then making all-round encasing including earth work excavation in all kinds of soil, refilling the trenches watering, curing, conveyance of all materials to site payment of royalty, taxes etc. & testing all complete as per PH sp and dir of EIC.160mm dia with allround encasing
254	Providing and fixing Chlorinated polyvinyl Chloride (CPVC) Pipes conforming to I.S 15778 having the thermal stability for hot and cold water supply including all CPVC plain and brass threaded fittings including fixing the pipes with clamps at 1.00 mtr spacing, this includes jointing of pipes and fittings with one step solvent cement and testing of joints etc all complete as per direction of the E.I.C.
255	20 mm dia C-PVC Pipe( Internal)
256	25mm dia C-PVC Pipe (external)
257	40mm dia C-PVC Pipe (external)
258	Supplying all Materials labour T&P and fitting and fixing brass/CP Fittings of the following nominal bore with supply of all jointing materials etc. complete as per PH Specification and Direction of EIC. 15mm dia CP pillar cock JAQUAR Make
259	20mm dia cp concealed stop cock JAQUAR Make
260	15mm dia cp angle stop cock JAQUAR Make
261	15mm dia cp bib cock S.B. JAQUAR Make
262	15mm dia cp bib cock L.B. JAQUAR Make
263	15mm dia CP Two way bib Cock JAQUAR Make
264	Health Fuccet JAQUAR Make
265	15mm dia CP flange JAQUAR Make
266	15mm dia CP Extension piece JAQUAR Make
267	25mm dia Brass Ball Valve
268	40mm dia Brass Ball Valve
269	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) pure chill 40 PSS UV of size 750 x 570 x 1350mm hight with water storage capacity 40 liter's along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per munite etc all complete as per approved drawing , specification and direction of the Engineer in charge.Aqua guard pure Chill 40 PSS UV
270	Supplying all materials labour T&P and fixing water storage sintex tanks including and providing extra sockets and jam nuts, fixing ball valve etc. including hoisting and placing the to the required position, including cost of tank conveyance and taxes of all materials to work site etc. all complete as per PH specification and direction of EIC.
271	2000 lit sintex tank (Ground Floor)
272	Supplying all materials labour T&P and construction of masonry staging with providing 1st KB brick work in cm (1:6) of 0.40mtr height in staging and in circular protection wall to support to the tank 12mm thick cement plaster in cm (1:4) over brick work RCC beam of 2.61 x 0.25x0.30 using cc (1:1.5:3) using 12mm chips including centering and shuttering curing, conveyance of all materials to work site etc. all complete as per sp and dir of EIC.
273	2000 ltr capacity tank Ground floor
274	Additional ht of 5.00mtr
275	Supplying of ISI mark 1.00 HP single phase vertical submersible pump set with discharge of 900-1000 ltr/hour and a head of 50-60 mtr of reputed make like KSB/Texmo & Equivalent including all cost, conveyance and taxes etc. all complete as per direction of E.I.C.
276	Supplying all labour T&P and fitting and fixing of 1.00HP single phase verticaql submersible pump set with commissioning and testing etc. all complete as per direction of EIC.
277	Supplying and fitting and fixing of ISI mark DOL starter of reputed make like BCH or equivalent for 1.00HP single phase submersible pump including all cost, conveayance and taxes etc. all complete as per direction of EIC.
278	Supplying and fitting and fixing of three core flat cable (1.5mm2) of ISI make of reputed company like BCH/Finolex or equivalent and connecting the pump and starter including all cost, conveyance and taxes etc. all complete as per direction of EIC.
279	Supplying and fitting and fixing jof plastic rope, MS well cover, MS clamp, stainless steel short piece, bend & socket including all cost, conveyance and taxes etc. all complete as per direction of EIC.
280	Supplying and fitting and fixing of HDPE pipes and pipe fittings with making connection to pump set including all cost, conveyance and taxes etc.all complete as per direction of EIC.25mm dia HDPE Pipe(Internal Pipe)
281	SINKING OF BORE WELL (125 mm ) Dia by DTH method
282	Labour for drilling a perfectly bore holes as specified dia for a specified defth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per direction of engineer incharge including use of own rig with its accessories, tools and plants and consumables etc. for lowering of 125mm dia PVC/G.I./M.S. pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (PVC/G.I./M.S) casing pipes if required to prevent collapse of over borden is to be provided by the contractor including lowering and withdrawing after completion of the tube well.
283	a) Labour for Drilling
284	i) 0.00 mtr to 91.00 mtr & above
285	Lowering the following size of G.I./PVC housing pipe with or without slotted pipes as per necessity from ground level upto 30.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plants complete and keeping the top of casing pipe threading including plugging tube well to prevent entry of foreign materials from above (G.I./PVC) supplied by the contractor (including cost of casing pipe.
286	a) Lowering of 125mm dia PVC casing pipe
287	i) From 0 mtr to 30.00m and above
288	b) Cost of 125mm dia PVC casing pipe (80 Sch)
289	i) From 0 mtr to 30.00m and above
290	Cleaning and developing the tube well using their own compressor continuously worked till clean and adequate discharge as obtained from the tube well including supply of and use of all necessary equipments and labour as per the direction of engineer incharge.
291	Supplying all materials , labour , T&P and providing , fitting and fixing of I. M - II hand pump complete with accessories and along with 8nos of riser pipes of 32mm dia nominal bore hot dip galvanised screwed and socked, fitted with socked made of seamless or machine from solid bar socked fitted at one end and thread protector at the other end with 8nos of 12mm dia connecting rod made of bright bar electrogalvanised fitted with coupler and fitted with stand assembly suitable for use in bore well etc all complete as per direction of EIC.
292	Supplying all materials, labour, T&P and construction of drain as per UNICEF etc all complete as per specification and direction of EIC.
293	Supplying all materials, labour, T&P and constructing tubewell Platform as per UNICEF design with drain and specification with C.C (1:2:4)using 12 mm size C.B H.G chips embedding pedestal base concrete of 76x76x40cm size, outer and inner diaplatform 1.85m and 1.65 m respectively with 0.10m, height walling, footrest size1.0mx1.0m including earthwork in all kinds of soil, centering and shuttering, laying concrete, plastering and punning, watering and curing finished smoothincluding cost, conveyance of all materials to work site, payment of royalty, taxes etc all complete as per approved specification and direction of the E.I.C.(1.80 m dia)
294	Sinking of 200x150 mm Dia Bore well by DTH Method
295	Labour for drilling a perfectly vertical bore hole of specified dia for a specified depth below ground level through consolidated and unconsolidated rock with down the hole hammer drilling rig or combination rig as required to suit the site condition as per the direction of the Engineer in charge including use of own rig with its accessories, tools and plant and consumables etc for lowering of 200mm/150mm dia G.I/P.V.C/M.S casing pipes for housing fitted with socket and with or without well screen as per the necessity for soft, medium, hard and boulder formation (G.I/ P.V.C/ M.S casing pipes if required to prevent collapse of overburden is to be provided by the contractor including lowering and withdrawing after completion of the tube well), 200mm dia to 400mm dia in overburden portion including packing of gravel supplied by the contractor for 400mm dia bore only
296	Drilling of 200mm dia bore
297	00 mtr to 30mtr
298	30 mtr to 45mtr
299	Drilling of 150mm dia bore
300	45 mtr to 213
301	Lowering the following size of G.I/P.V.C/M.S housing pipes with or without slotted pipes as per the necessity from ground level up to 45.00m depth and fitted and fixed up in perfectly vertical position including cutting and threading of pipes and slotted pipes and supplying and fixing all jointing materials, tools and plant etc all complete and keeping the top of casing pipe threaded including plugging tube wells to prevent entry of foreign materials.
302	200mm dia PVC pipe
303	00 mtr to 45 mtrs
304	Supplying polyvinyl chloride pipes as per ASTM-D-1785-89 having threads in accordance with DIN 2999 part-1/DIN-42225 part-II specification length of pipe (laying length) will be 3 mtrs. The pipes shall be supplied with both external and threaded with free socket. The pipe having external thread at one end i.e female and or belled end. The female end having internal thread is to be belled in order to accept the male end while jointing pipes with a bore threading shall be provided with a greave at the roof of the male thread accomodate flexible PVC/Rubber 'O' ring to make the joint water tight colour of the pipe shall be blue. The name of the manufacture along with batch No class of pipe shall be stranded legibly of each pipe length.
305	Cost of 200mm dia PVC (sch-80) pipe
306	Supplying all materials, labour, T&P and providing and providing sanitary sealing by cement concrete grouting of annular space around GI/PVC/MS housing pipe upto 5m below ground level (as per drawing) to plug the bore hole excluding cost of cement all complete as per direction of the Engineer in charge. Minimum one metre of casing pipe to be inserted in the bore into the rock at the bottom to ensure sanitary sealing (excluding cost of cement which will be supplied directly by the department)
307	Cleaning and developing the tube well with supply of compressor worked till clear and adequate discharge is obtained from the tube well including supply and use of all necessary equipment and labour as per direction of the Engineer in charge
308	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submersible type submersible electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trial running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge (Texmo/Crompton Greaves/Kirloskar make)
309	2 H.P. Single phase/ three phase 3 stage head renge of 20 to 35 mtr with discharge capasity 145 to 110 L.P.M With outlet dia 25 mm
310	DOL Control panel
311	40mm dia steel short piece
312	Well cap
313	50mm size CI bracket
314	Steel rope with cover
315	Labour charges for lowering including transportation
316	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor HDPE pipes and pipe fittings conforming to IS: 4984/2000 (10kgf/sqcm) of the following nominal bore with clamps and jointing by Fusion welding method including testing, making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge
317	32mm HDPE pipes (Finolex/Supreme make) Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Construction Of Jmfc Court Building At Damapada In The District Of Cuttack For The Year 2024 - 25, Cuttack-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Construction Of Jmfc Court Building At Damapada In The District Of Cuttack For The Year 2024 - 25, Cuttack-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us