|
| 1 | Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc. and removal of rubbish off complete all as specified and as directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n. exc. 15 cm thickness (below or above ground level) and removing the demolished material to a distance exc. 250m but not exceeding 500m and depositing where directed, complete all as specified and as directed by Engr-in-Charge. |
| 3 | M&L for 15mm thick rendering in CM (1:4) on stone masonry surfaces complete all as specified and as directed. |
| 4 | M&L for preparation of new wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls finished even and smooth with sand paper and applying two coats of oil bound distemper complete all as specified and as directed. |
| 5 | M&L for preparation of new plastered or unplastered surfaces of walls and applying two coats exterior weather proof water base emulsion paint over a coat of chalk whiting complete all as specified and as directed. |
| 6 | M&L for preparation of old surfaces including complete removal of old existing treatment of wall surfaces and applying one coat of white cement base wall care putty 2 mm thick on walls, finished even and smooth with sand paper and applying two coats of oil bound distemper complete all as specified and as directed. |
| 7 | Dismatling floor, hearth or wall tiling including cement mortor bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 8 | M&L for 25mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates) as in levelling course, finished even and fair for laying floor finishes etc. complete all as specified and as directed by the Engineer-in-Charge. |
| 9 | M&L for vitrified ceramic tiles 10mm thick, light shade (square/ rectangular) area of each tile not exceeding 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and as directed by Engr-in-Charge. |
| 10 | M&L for vitrified ceramic tiles 9mm to 10mm thick, light shade (square/ rectangular) area of each tile not exceeding 0.36 Sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engr-in-Charge. |
| 11 | M&L for heavy duty parking coloured tiles 10 to 12mm thick of size not less than 300mm x 300mm, laid over and including 15mm thick screed bed in CM (1:4), set, jointed in cement slurry and pointed in white or coloured cement to match the colour/ shades of tiles complete all as specified and as directed. |
| 12 | M&L for glazed ceramic tiles light coloured of size not less than 300mm x 450mm and thickness 7-8 mm, on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, laid over and including rendering 10mm thick in CM (1:4) on wall complete all as specified and as directed. |
| 13 | M&L for machine cut kota stone slab flooring 18-20 mm thick (minimum size 55cm x 55cm), laid over and including 15mm thick screed base in cement mortar (1:6), laid and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and mirror polishing complete all as specified and as directed by Engineer-in-Charge. |
| 14 | M&L for kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar, laid over and including cement screed 10mm thick in CM (1:4) and jointed with grey cement slurry mixed with pigment to match the smooth of the slab including rubbing and polishing complete all as specified and as directed. |
| 15 | M&L for 40mm thick PCC (1:2:4) type B0 (using 12.5mm graded stone aggregates), finishing cement concrete surface even and smooth without using extra cement complete all as specified and as directed. |
| 16 | Demolition of brickwork or stone/ boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles complete all as specified and as directed. |
| 17 | M&L for walling of squared rubble, uncoursed, well bonded, bedded and solidly hearted, built in CM (1:6) complete all as specified and as directed. |
| 18 | Dismantling of stone slabs and tiles of any description or thickness in floors, approns etc. laid and bedded in any mortor complete all as specified and as directed. |
| 19 | M&L for stone jalli of 35-40mm thick in any size and in side shape with asthetic view complete all as specified and as directed by Engineer-in-Charge. |
| 20 | M&L for providing sand stone pillars with asthetic view in two sides as approved by Engineer-in-Charge to fix stone jali of 35-40mm thick, size not less than 0.10m x 0.10m x 0.90m, including chamfers weatherings, throating etc. complete all as specified and as directed. |
| 21 | M&L for providing precast cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregeates) as louvres and jallies, 25mm thick (measured solid), set in CM (1:6) including all mouldings and demolition and removal of old material from site but excluding frame work complete all as specified and as directed. |
| 22 | M&L for providing precast cement concrete (1:2:4) type B0 (using 12.5mm graded stone aggregeates) as in pillars with jafari of size not less than 0.10m x 0.10m x 0.90m with plain fair faces, including chamfers weatherings, throating etc. and setting in cement mortar (1:6) complete with joints to match complete all as specified and as directed. |
| 23 | M&L for 40mm thick rough dressed sand stone slab flooring bedded and jointed in cement mortar (1:6) and pointed in cement mortar (1:3) complete all as specified and as directed by Engineer-in-Charge. |
| 24 | M&L for 40mm thick sand stone slabs to wall surfaces, polished, set and jointed in cement and stone dust mortar (1:3) and pointed in cement mixed with approved pigment to match, laid over and including 10mm thick rendering in cement mortar (1:4) complete all as specified and as directed by Engineer-in-Charge. |
| 25 | M&L for granite of 18mm to 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble, laid over and including 20mm screed bed in cement mortar (1:4) complete all as specified and as directed by the Engineer-in-Charge. |
| 26 | M&L for rounding/ chamfering to edge of stone slab like granite, marble, kota stone etc to required shape and design including grinding and polishing to obtain required finish complete all as specified and as directed. |
| 27 | M&L for 100mm thick PCC (1:4:8) type D2 (using 40mm graded stone aggregates) as in sub base floor/ floors and paving etc. complete all as specified and as directed. |
| 28 | M&L for providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design and pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness and size/ shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter-locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed. |
| 29 | M&L for precast cement concrete (1:2:4) type B1 (using 20mm graded stone aggregates) as in kerb, solid blocks, exc. 10 cm in width and setting in cement mortar (1:4) complete all as specified and as directed. |
| 30 | Dismantling boarding, any description, fixed in any position with nails complete all as specified and as directed. |
| 31 | M&L for solid PVC wall lining consisting of 5mm thick wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and as directed. |
| 32 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on wall to make PVC frame as per specification and drawing complete all as specified and as directed. |
| 33 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified and as directed. |
| 34 | S&F anodised aluminium snap grid frame work (600mm x 600mm) for false ceiling complete all as specified and as directed. |
| 35 | S&F 8mm thick calcium silicate board if siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid for exposed metal frame ceiling complete all as specified and as directed.Note:- Frame work for ceiling shall be measured and paid separately. |
| 36 | M&L for preparation of new decorated plastered or unplastered surfaces of ceilling and applying two coats of oil bound distemper white or tinted over a coat of white putty in patches as required all as specified and as directed by Engineer-in-Charge. Please Enable Macros to View BoQ information |
