Tender For Special Repair To Bldg No. 216A Of Certain Unit And 35 X Garbage Bin And Its Connected Path At Hamid Bagh And Toilet And Bathroom Block Of Bldg No. P-1920 (Wing Number Ii, Vi, Vii) Of Certain Unit At Army Area Jodhpur Under Ge (Army) No. 0, Jodhpur-Rajasthan

TDR : 55961644

Tender Notice
BOQ

27 Days Left

Jodhpur , Rajasthan

Tender Brief : Tender For special Repair To Bldg No. 216A Of Certain Unit And 35 X Garbage Bin And Its Connected Path At Hamid Bagh And Toilet And Bathroom Block Of Bldg No. P-1920 (Wing Number Ii, Vi, Vii) Of Certain Unit At Army Area Jodhpur Under Ge (Army) No. 0

Document Fees
₹ 1000 /-

EMD
₹ 168250.0 /-

Tender Value
₹ 95.50 Lakhs /-

Submission Date
11-07-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. complete all as specified and directed by Engr -in- Charge.
2	Demolition of Cement concrete in ground floors and pavings n.exc 15 cm thickness below or above ground level) and removing debris out of MOD land.complete all as specified and directed by Engr -in- Charge.
3	M&L for 25 mm thick cement concrete type B-1 1:2:4 (using 20mm graded crushed stone aggregate) to receive floor finishes etc complete all as specified and directed by Engr -in- Charge.
4	M&L for coloured glazed ceramic tiles 300mmx450mmx6mmthick as per IS 13712 Grade II(a) over 15mm thick rendering in CM (1:6) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified and directed by Engr -in- Charge.
5	M&L for coloured non skid ceramic tiles 300mmx300mmx6-7 mm thick as per IS 13712 Grade II(a) in floor etc set jointed and pointed in white or coloured cement to match as in floors over and including 15mm thick screed bed in CM (1:6) complete all as specified and directed by Engr -in- Charge.
6	Demolition of stone masonry /block walling built in cement mortar.complete all as specified and directed by Engr -in- Charge.
7	Taking down cement plaster on stone masonry, RCC surfaces,ceiling, dado surfaces etc complete incl racking out joints, hacking for key scrubbing down with water.complete all as specified and directed by Engr -in- Charge.
8	M&L for Pre-cast cement concrete block masonry with solid blocks type C1 (1:3:6) (20mm graded aggregate) bult in CM 1:6 , exc. 10 cm in width and setting in mortar 1:6, complete all as specified and directed by Engr -in- Charge.
9	M&L for 15mm thick rendering in CM 1:6 on stone masonry finished even and smooth without using extra cement complete all as specified and directed by Engr -in- Charge.
10	M&L for 15mm thick rendering in CM 1:4 on stone masonry/concrete surface finished even and smooth without using extra cement and mixed WPC complete all as specified and directed by Engr -in- Charge.
11	M&L Rendering 10 mm thick in CM (1:4) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified and directed by Engr -in- Charge.
12	M&L for three coats of white wash including preparation of new surfaces as on ceilings complete all as specified and directed by Engr -in- Charge.
13	M&L for three coats of white wash including preparation of new surfaces on walls complete all as specified and directed by Engr -in- Charge.
14	M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper including 2 coat of wall care putty complete all as specified and directed by Engr -in- Charge.
15	M&L for Preparation of new surfaces of plastered /pointed & applying two coats of exterior emulsion paint over a coat of suitable primer on walls complete all as specified and directed by Engr -in- Charge.
16	Taking down chowkat with shutters (without taking off shutter from frame) size area n.exc1.50 sqm each.complete all as specified and directed by Engr -in- Charge.
17	Taking down chowkat with shutters (without taking off shutter from frame) size area exc 1.5sqm but n.exc4.0 sqm each.complete all as specified and directed by Engr -in- Charge.
18	Taking down of steel window and ventilators.complete all as specified and directed by Engr -in- Charge.
19	S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately) complete all as specified and directed by Engr -in- Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
20	S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) complete all as specified and directed by Engr -in- Charge.
21	S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete with glazing bars, complete all as specified and directed by Engr -in- Charge.
22	S&F of Box type steel ventilator with top hung shutter including hinges with steel handle, and steel peg stay, complete without glazing bars, complete all as specified and directed by Engr -in- Charge.
23	S &F of Stainless steel butt hinges medium weight, of size 100 mm size.complete all as specified and directed by Engr -in- Charge.
24	S&F 150mm long aluminium anodized barrel tower bolt of extruded section and fixed complete all as specified and directed by Engr -in- Charge.
25	S&F 150mm long alluminium handles, cast type, anodized and fixed complete all as specified and directed by Engr -in- Charge.
26	S & F Aluminium alloy, anodised, sliding door bolt 300mm size with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections& fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed. complete all as specified and directed by Engr -in- Charge.
27	S&F 125 mm size single action spring hinge bright finished body of mild steel with steel wire spring heavy duty complete all as specified and directed by Engr -in- Charge.
28	M&L for applying two coat of synthetic enamel paint on steel surfaces of any description not otherwise described over 10 cm width or girth over red oxide including necessary preparation complete all as specified and directed by Engr -in- Charge.
29	S&F for 4 mm thick figured , pin headed glass ordinary quality & glazing with oil putty in square n exc 0.50sqm in each pane.complete all as specified and directed by Engr -in- Charge.
30	M&L for PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in bed block for hold fast including necessary form work complete all as specified and directed by Engr -in- Charge.
31	S&F in repair of Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe)and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely complete all as specified and directed by Engr -in- Charge.
32	S&F in repair vitreous china squatting Pan, Orissa Pattern of size 580X440mm white with integral foot rests and cast iron `P' or `S' trap front or back fixed in repairs Including connection to trap etc and provision of cement concrete bedding and making good to floor completely complete all as specified and directed by Engr -in- Charge.
33	S&F PVC low level 10 lit capacity valve less syphonic action type flushing cistern with inlet ball valve float and handle including brackets complete all as specified and directed by Engr -in- Charge.
34	Taking up or down GI tubing/CPVC 15 mm bore and connection, including cleaning for refixing or remove from site.complete all as specified and directed by Engr -in- Charge.
35	Taking up or down GI tubing/CPVC 25 mm bore and connection, including cleaning for refixing or remove from site.complete all as specified and directed by Engr -in- Charge.
36	S&F 40 mm bore tubes medium grade galvanised with all fittings and fixed to walls, ceilings or laid in floors complete all as specified and directed by Engr -in- Charge.
37	Supply & Fixing UPVC tubing medium grade having internal dia 25mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor complete all as specified and directed by Engr -in- Charge.
38	Supply & Fixing UPVC tubing medium grade having internal dia 20mm SDR-11 Including all fitting (eblow, socket,tee with internal thread of brass) fixed on wall, ceiling or laid to floor complete all as specified and directed by Engr -in- Charge.
39	M & L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting exceeding 20cm girth, complete all as specified and as directed by Engr-in-Charge.
40	S&F PVC connections of 15mm size with PTMT nuts of 600mm long complete all as specified and directed by Engr -in- Charge.
41	S&F as in repairs light coloured (Ivory) vitreous china, wash hand basin of size 550mm X 400mm flat back with pedestal Including bracket , CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as specified and directed by Engr -in- Charge.
42	M&L 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc .complete all as specified and directed by Engr -in- Charge.
43	M & L for Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement.complete all as specified and directed by Engr -in- Charge.
44	S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms)complete all as specified and directed by Engr -in- Charge.
45	S&F Pillar taps 15mm bore , cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with long screwed shanks and fly-nuts, screwed for iron pipe .complete all as specified and directed by Engr -in- Charge.
46	M&L for 6 mm thick bevelled edges high quality looking mirror fancy type fixed to wall with chromium plated screw with cup washers and molded edges etc complete all as specified and directed by Engr -in- Charge.
47	S&F in repair bib taps chromium plated 15mm cast copper alloy, fancy type with crutch or butterfly handle screwed down screwed for iron pipe 15mm bore complete all as specified and directed by Engr -in- Charge.
48	S&F in repair Brass 15mm CP wall mixer for mixing hot & cold water screwed on wall of iron pipe and fixed complete all as specified and as directed by Engr-in-Charge.
49	S&F in repair of stop valves/angle cock,chromium plated 15mm cast copper alloy, fancy type, fixed complete all as specified and directed by Engr -in- Charge.
50	S & F two way angle cock cromium plated fancy type 15 mm bore /size cast copper alloy complete all as specified and directed by Engr -in- Charge.
51	S & F in repair 25 mm bore stop valves/Angle valve, cast copper alloy, fancy type chromium plated with crutch or butterfly handle, screwed down, screwed both ends for iron pipe 25 mm dia, fixed complete all as specified and directed by Engr -in- Charge.
52	S&F tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as specified and directed by Engr -in- Charge.
53	S & F liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats. (Minimum weight 105gms)complete all as specified and directed by Engr -in- Charge.
54	S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and directed by Engr -in- Charge.
55	S&F in repair Fancy type brass Chromium plated over head shower 120 mm dia with arm, round shape, single flow (ABS body CP with gray face plate) with Rubit cleaning system, suitable for 15mm bore pipe, including fixing to steel pipe or union, complete all as specified and as directed by Engr-in-Charge.
56	S&F as in repairs Corner Glass shelf 250mm superior quality consisting of 5.5mm thick sheet glass with CP tubular framing & brackets complete all as per sample.and as directed by Engr-in-Charge.
57	Dismantling of cast iron/PVC soil waste & vent pipes 100/110 mm dia incl all fittings etc complete all as specified and as directed by Engr-in-Charge.
58	Dismantling of cast iron/PVC soil waste & vent pipes 75 mm dia incl all fittings etc complete all as specified and as directed by Engr-in-Charge.
59	Supplying and laying of 75 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified and as directed by Engr-in-Charge.(with all fitting)
60	Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittings in trenches complete all as specified and as directed by Engr-in-Charge. (with all fitting)
61	Supplying and laying of 110 mm dia UPVC pipes SWR & Plain UPVC SDR 11 fittingson wall with clamp complete all as specified and as directed by Engr-in-Charge.(with all fitting)
62	S&F 110mm dia UPVC (SWR) bends any radius including cutting of holes.complete all as specified and as directed by Engr-in-Charge.
63	S&F 110mm dia UPVC (SWR) branch piece single (single 'Y') equal or unequal.complete all as specified and as directed by Engr-in-Charge.
64	S&F 110mm dia UPVC (SWR) branch piece double (double 'Y') equal or unequal.complete all as specified and as directed by Engr-in-Charge.
65	S&F 75mm dia UPVC (SWR) bends any radius including cutting of holes.complete all as specified and as directed by Engr-in-Charge.
66	S&F 75mm dia UPVC (SWR) branch piece single (single 'Y') equal or unequal.complete all as specified and as directed by Engr-in-Charge.
67	S&F 75mm dia UPVC (SWR) branch piece double (double 'Y') equal or unequal.complete all as specified and as directed by Engr-in-Charge.
68	S&F 75mm dia UPVC (SWR) floor trap, plain with grating including jointing with solvant cement complete all as specified and as directed by Engr-in-Charge.
69	S&F UPVC (SWR) gully trap 125/110 mm setting and jointing with solvant cement complete all as specified and as directed by Engr-in-Charge.
70	M&L for 75mm outlet diameter UPVC nahani trap, with CP Mild steel grating (with or without hole) including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) using 20mm graded stone aggregate.complete all as specified and as directed by Engr-in-Charge.
71	Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for (roof padding/roof kerb/sunken floor etc.) including tarfelt, plaster etc. and removing from site complete all as specified and as directed by Engr-in-Charge.
72	M&L for 15 mm thick rendering on floor and vertical side of sunken floor of stone masonry surfaces/brick work/concrete surfaces in CM (1:3) mixed with liquid water proofing compound @ 0.200 litre per bag of 50 kg of cement and finished even and smooth without using extra cement and applying a coat of bitumen 30/40 @ 1.50 kg/sqm and laying 200 micron polythene film complete all as specified and as directed by Engr-in-Charge.
73	M&L for cement concrete (1:5:10) type E-2 using 40 mm graded stone aggregates as in foundation, filling and mass concrete/sunken floors complete all as specified and as directed by Engr-in-Charge.
74	Dismantling existing water tank of capacity exceeding 1000ltrs and not exc 2000 ltrs and removing from site.complete all as specified and as directed by Engr-in-Charge.
75	S&F 1000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed by Engr-in-Charge.
76	S&F 2000 litres capacity rotational moulded polyethylene water storage tanks double layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including one 20mm ball brass valve with polythene float and fly nut screwed for iron pipe or brass ferrule & fixed complete all as specified and as directed by Engr-in-Charge.
77	M&L for laying 40-50 mm thick Machine cut sand stone slabs as in Plinth protections laid over 20 mm thick cement sand screed in CM1:4 over 50 mm thick PCC all as specified and directed incl filling the joints of sand stone slabs with neat cement mixed with pigment to match the shade of slabs incl demolition of concrete.complete all as specified and as directed by Engr-in-Charge.
78	M & L providing 35 mm thick pre-cast cement concrete 1:3:6 type C-0 using 12.5 mm graded stone aggregate as in louvers & jallies (measured solid) including all mouldings and including pre-cast frames set in cement mortar 1:6 complete all as specified and as directed by Engr-in-Charge.
79	M & L providing precast concrete Posts 100x100mm size & minimum 75 cm height 1:3:6 type C0 using 12.50 mm graded stone aggregate as in RCC jali post setting in mortar 1:6 complete all as specified and as directed by Engr-in-Charge.
80	Taking down carefully cement conc /spalled out concrete from RCC roof projections, ceiling ,sunsheds, chajja, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc complete all as specified and as directed by Engr-in-Charge.
81	M&L for fixing MS 12 mm dia TMT bars by way of stitching ( welding or tieing with existing reinf) incl drilling holes etc & securing ends in walls etc complete all as specified and as directed by Engr-in-Charge.
82	M&L for cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface.complete all as specified and as directed by Engr-in-Charge.
83	M&L for applying a coat of bond coat made with cement slurry (1 part cement to 1.5 -2 parts water) mixed with admixture LATEX POWER mixed @5 Kg per 50 kg of cement & applying to the conc surfaces @ 200 gm/sqm to obtain tack.complete all as specified and as directed by Engr-in-Charge.
84	M&L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand of over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat.complete all as specified and as directed by Engr-in-Charge.
85	M&L for 5 mm thick rendering in CM 1:3 on ceiling & finishing the surface even & smooth w/o using extra cement.complete all as specified and as directed by Engr-in-Charge.
86	M&L for 10-15 mm thick rendering in CM 1:3 over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & smooth complete all as specified and as directed by Engr-in-Charge at site
87	S&F GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjas/fascias, wall, ceiling etc.complete all as specified and as directed by Engr-in-Charge.
88	Excavation in trenches not exc 1.50m wide and not exc 1.50m depth and getting out in soft/loose soil complete all as specified and directed by Engr -in- Charge.
89	S&F 150mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars.complete all as specified and as directed by Engr-in-Charge.
90	M&L for cement concret (1:3:6) type C-2, using 40mm graded stone aggregate bed to drain pipe 150 mm dia including packing under and hunching against the sides of pipes after they are laid and tested including necessary formwork complete all as specified and as directed by Engr-in-Charge.
91	Returning, filing in including spreading, levelling watering and well ramming in layers not exc 25cm thick each complete all as specified and as directed by Engr-in-Charge.
92	Removing excavated material to a distance not exc 50m depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed by Engr -in- Charge.
93	S&F Mild Steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165.complete all as specified and as directed by Engr-in-Charge.
94	M&L for cement concrete 1:2:4 type B1 using 20 mm graded stone agg as in copings, kneelers, apex stones, bed plates, kerbs lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, parapets, and railings upto 60cm in height copings, kneeless, opex stones, bed plates, kerbs including weathering, slightly rounded or chamfered angles and throating, complete all as specified and as directed by Engr-in-Charge.
95	S&F 75mm thick Jodhpur type stone slab not exc 2m in length machine cut all face & along exposed edged size faced both sided as in manhole cover, Chajja, landing, selves etc complete all as specified and as directed by Engr-in-Charge.
96	M&L for coloured glazed ceramic tiles 300mmx450mmx6mm thick as per IS 13712 Grade II over 10mm thick rendering in CM (1:4) set and jointed in neat cement slurry and pointed with colour cement to match on vertical surfaces as in dado (colour and pattern as approved by GE) complete all as specified and directed by Engr -in- Charge.
97	M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floor etc over and including 15mm thick screed bed in CM (1:6) all as specified and as directed by Engr -in-charge
98	M&L for vitrified ceramic double charged dark shade tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm,(size of tile 600x600mm) each in floors etc. set and jointed in neat cement slurry, over 15mm thick screed bed in CM (1:6) and pointed in white or coloured cement to match complete all as specified and directed by Engr -in- Charge.
99	All as per item no 98 above but on skirting dado over 10mm thick cement plaster in CM 1:4 complete all as specified and directed by Engr -in- Charge.
100	M&L of 18-20mm thick machine cut KOTA stone slab as in floor (size not less than 580mm x 580mm) , treads, steps etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified as in floors over and including 15mm thick in screed bed in CM (1:6) complete all as specified and directed by Engr -in- Charge.
101	M&L of 18-20mm thick machine cut KOTA stone slab riser of step , skirting, dado etc(Single piece for steps), machine cut, laid over cement and jointed with grey cement slurry with pigment to match the shade of the slab, incl rubbing and Mirror polishing all as specified including backing coat of 10mm thick in CM (1:4) . complete all as specified and directed by Engr -in- Charge.
102	M&L for preparation of old surfaces of wall including complete removal of inisting treatment brooming down or steel wire brushing; scrapping down smooke soot, moulds, moss,& efflorescent salt & trading oil and greasy spots complete all as specified and directed by Engr -in- Charge.
103	M&L for two coat of white wash including preparation of old surfaces as on ceilings complete all as specified and directed by Engr -in- Charge.
104	M & L for two coat of cement based paint on new plastered/ unplastered surfaces over one coat of white wash on wall & including preparation complete all as specified and directed by Engr -in- Charge.
105	Raking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar complete all as specified and directed by Engr -in- Charge.
106	M&L for Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 complete all as specified and directed by Engr -in- Charge.
107	S& F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame complete all as specified and directed by Engr -in- Charge.
108	S&F 5mm thick plain colour PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement and fixing at complete all as specified and directed by Engr -in- Charge.
109	M&L for rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates conforming to Fe 290(Gde E-165).complete all as specified and directed by Engr -in- Charge.
110	Dismantling of Vertical Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr -in- Charge.
111	S & F pre painted galvatume aluminium zinc GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550Mpa as in roof covering fixed with J or L hooks complete all as specified and directed by Engr -in- Charge.
112	S & F Plain, galvanised, mild steel sheeting 0.63 mm, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed by Engr -in- Charge.
113	Supply and fabrication of Mild steel guard bars, grills, grating, and similar work and welded to window frames, door frames (made up of angle), balcony railing confirming to Fe 290, gde E-165 etc complete all as specified and directed by Engr -in- Charge.
114	S&F of stainless steel wire cloth 0.36 mm nominal dia of wire & avg width of appertuer 1.40 mm fixed with stainless steel wire staples to Anodised aliminium framework of windows / vents & door shutters etc complete all as specified and directed by Engr -in- Charge.
115	S&F Floor door stopper of 150mm long cover plate of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.complete all as specified and directed by Engr -in- Charge.
116	S& F 5mm thick coloured Figured glass, pin head type and glazing with oil putty in squares n exc 0.5 sq.m each pane complete all as specified and directed by Engr -in- Charge.
117	S & F 12mm thick block board, grade 2 quality, interior grade, commercial type, fixed with screws fixed with screws to aluminum any type of frame work, complete all as specified and directed by Engr -in- Charge.
118	S&F Anodised aluminium frame powder coated for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed by Engr -in- Charge.
119	S&F Anodised aluminium door/winsow shutters powder coating of any colour (Thickness of powder coating not less than 50 micron) , aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed by Engr -in- Charge.
120	S & F Pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators.complete all as specified and directed by Engr -in- Charge.
121	S&F Tinted Toughned glass 12mm as in hinged doors, partitions, automatic doors and similar work including cutting to shape, drilling holes required accessary handle floor closer machine, floor hings and complete all as specified and directed by Engr -in- Charge.
122	S&F mild steel flat iron as wind ties of grade Fe-290 Gde-E-165 or roof including including drilling holes securing bolts etc and similar work complete all as specified and directed by Engr -in- Charge.
123	S&F in repairs of Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminum alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass, other parts made of mild steel heavy duty & fixed complete all as specified and directed by Engr -in- Charge.
124	S&F in repairs mortice latch with two levers (Vertical type) mild steel body 100mm long and fixed.complete all as specified and directed by Engr -in- Charge.
125	S &F Extruded Anodised Aluminium handles 150 mm size fabricated type.complete all as specified and directed by Engr -in- Charge.
126	S & F for 4 mm thick plain sheet glass ordinary quality & glazing with oil putty in square n exc 0.50sqm ineach pane.complete all as specified and directed by Engr -in- Charge.
127	M & L for two coat of synthetic enamel paint on old wooden surface including preparation of surface, over 10Cm width or girth complete all as specified and directed by Engr -in- Charge.
128	Supply, laying, testing & commissioning of 16 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.
129	Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) fixed to wall, ceiling or laid on floor, with CPVC solvent, complete all as specified and as directed by Engr-in-Charge.
130	S&F stop valves cast copper alloy (ISI marked) CP screwed down high pressure with crutch or butterfly handle screwed both ends for 20mm bore of iron pipe or union and fixed in repair complete all as specified and directed by Engr -in- Charge.
131	S&F in repairs decorative type curtain rod stainless steel finish of pipe 22 to 25 mm dia with best quality knob metal with double fitting type including stainless steel brackets fixed to walls complete with two nos decorative stainless steel knobs at each end complete all as specified and directed by Engr -in- Charge.
132	S&F of Vitreous China wash basin size 450 x 300mm with padestal, white, flat back, including CP waste coupling, waste pipe, PVC Connection 15mm dia and 300 mm long, brackets complete all as specified and directed by Engr -in- Charge.
133	Taking down existing roof treatment in any postion and any thickness on RCC roof slab and debries to be disposed out of MOD land.complete all as specified and directed by Engr -in- Charge.
134	M&L for applying roof treatment on top of roof with APP modified membrane with non woven polyester reinforcement (centre core) shall be laid by torch application method with overlap 100mm on length side and 100mm on width side including a coat of bituminious oil based primer ( IS : 3884) @ 250gm / Sqm weight not less than 3 kg/Sqm for rendering 10mm thick in cement mortar (1:4) on concrete surface as on roof slab, finished even and smooth without using extra cement mix with water proofing compound as per manufacturer instruction complete all as specified and directed by Engr -in- Charge.
135	M&L for cement concrete (1:2:4) type B-0 using 12.5mm stone aggregate as in roof padding benching kerbs of mud stops, rounded or chamfered on edges including form work complete all as specified and directed by Engr -in- Charge.
136	Dismantling existing water tank of capacity exceeding 500 ltrs and n. exc 1000 ltrs and removing from site.complete all as specified and directed by Engr -in- Charge.
137	S&F rotational moulded polyethylene water storage tank ISI Marked (cylindrical vertical with closed top) white, hoisted and fixed in position all as directed of capacity 500 ltrs a Including 20mm bore brass ball valve high pressure with polythene float complete all as specified and directed by Engr -in- Charge.
138	Supply only integral water proofing compound (ISI marked).complete all as specified and directed by Engr -in- Charge.
139	M&L 75 mm thick PCC (1:4:8) type D2 using 40mm gradded stone aggregate as in sub base.complete all as specified and directed by Engr -in- Charge.
140	M&L for 100mm thick cement concrete 1:2:4 type B--2 (using 40mm graded stone aggregate) finished surface even and smooth without using extra cement as in floor hard standing complete all as specified and directed by Engr -in- Charge.
141	S& F Glass dividing strips, 3 mm thick and width 22 mm insert portion of hardtanding complete all as specified and directed by Engr -in- Charge.
142	S&F machine pressed precast cement concrete blocks of M-35 Grade (interlocking paves) colour rubberised 60mm thick with 6mm top layers of anti abrasive material confirming to IS 15658-2006 with grey cement and NO pigment. The interlocking joints shall be filled with fine sand and incl 25mm thick Sand filling to be used as a cushion under paver block.complete all as specified and directed by Engr -in- Charge.
143	Demolition of RCC as in Downward fascia , Roof projectios, sunshades suspended roof slabs railings etc complete all as specified and directed by Engr -in- Charge.
144	S & F mild steel TMT bar 10mm dia and over, cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr -in- Charge.
145	S & F mild steel TMT bar 6 to 8 mm dia cut to length, bent to shape required including cranking, bending, spirally for hooping for columns, beam , slab etc hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clip complete all as specified and directed by Engr -in- Charge.
146	M&L Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr -in- Charge.
147	Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets.complete all as specified and directed by Engr -in- Charge.
148	S & F for Anodised aluminium snap grid frame work ( 605x605 mm) for false ceiling all as specified and incl dismantling of existing false ceiling, etc complete all as specified and directed by Engr -in- Charge.
149	S&F Exposed metal frame ceiling with calcium silicate board 6mm thick of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately.complete all as specified and directed by Engr -in- Charge.
150	M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal.complete all as specified and directed by Engr -in- Charge. flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed by Engr -in- Charge.
151	S & F Solar control film 50 micron reflective any type for glass of door and windows (gareware sun control or equivalent) for complete all as specified and directed by Engr -in- Charge.
152	S &F as in repairs Stainless steel sink, 1.00mm thick for kitchen or laboratory, with plug, waste pipe, washers, including cantilever cast iron brackets, connecting union etc., overall size 495mm x 420mm with bowl size 410mm x 330mm x 160mm complete all as specified and directed by Engr -in- Charge. incl taking out & removal of old sink arrangement .
153	M&L for jodhpur type squared rubble regular coursed well bonded, bedded and soildly hearted stone masonry built in CM 1:6 complete all as specified and directed by Engr -in- Charge.
154	Extra over Jodhpur type stone masonry for hammer dressing to face beds & joints with max depression froom a straight edge not exc 20 mm.complete all as specified and directed by Engr -in- Charge.
155	M&L for carrying out two coat of exterior grade plastic paint over new/old surfces plastered /pointedsurfaces of walls , RCC chajjas fascias roof projection etc of approved pattern ( Top Gun Compact / Stucco shade/pattern ) incl preparing the surfaces making good to depressions etc complete to obtain the desired finish all as per sample complete all as specified and directed by Engr -in- Charge.
156	M&L Machine cut kota stone slab flooring 20-25 mm thick over 15 mm thick CM(1:6) screed bed base laid and jointed with grey cement slurry mixed with pigment to match the said of the slab including rubbing and polishing complete all as specified and directed by Engr -in- Charge.
157	S&F welded steel wire fabric weight not exc 4 kg per square metre supplied and fixed to wood or steel members complete all as specified and directed by Engr -in- Charge.
158	M&L for 50 mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection laid in bays not exc 1.5m with expansion joints 30x10mm , finished the surface even and smooth without using extra cement complete all as specified and directed by Engr -in- Charge.
159	Surface excavation n. exc. (not exceeding 30 cm deep and avg 15 cm deep) and getting out in sof/loose soil complete all as specified and directed by Engr -in- Charge.
160	M&L for Hard core of broken stones or boulders to gauge n exc 63mm ,deposited spread and levelled in layers n. exc 15mm thick watered and rammed to a true surface laid complete all as specified and directed by Engr -in- Charge.
161	S&F machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C1 (20mm stone agg) and set in CM 1:4 complete all as directed by Engr-in-Charge
162	M & L for 2-3 mm thick Fibre glass reinforced translucent sheeting with two side lap fixed with coach screw and washer in roof, wall etc complete all as specified and directed by Engr -in- Charge.
163	S & F Rolled mild steel framed work as in door or gates of angle ,MS hollow pipes, solid SQ sections Flat iron etc or other section with gusset plates, rails, braces etc complete with steel sheeting as required to br prepared for hanging or sliding with and including MS Channel as posts & hold fasts & suitable arrangements for locking etc complete all as specified and directed by Engr -in- Charge. conforming to Fe 290.Gde E165.
164	S&F Modular socket outlet 2 in 1, 3 pin, 6 Amp, 230 Volts flush type .complete all as specified and directed by Engr -in- Charge.
165	Supply and fixing warm White LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed by the Engineer-in-Charge.
166	Supply and fixing LED COOL White light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by the Engineer-in-Charge.
167	Taking down and refixing exhaust fan 300/250mm same location complete all as specified and directed in charge.
168	Taking down and refixing geyser 25/50 ltrs same location complete all as specified and directed in charge.
169	Supply and fixing as MCB DB SPN (double door) 8 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.
170	Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300 mm complete all as specified and directed by engr-in-charge.
171	M&L for sub main wiring with two runs of PVC insulated but unsheathed multi stranded copper conductor FRLSH cable 1100 volt grade of size 6 Sqmm and one run of 6 Sqmm single core PVC insulated but unsheathed multi stranded copper conductor FRLSH cable (Phase-Red, Neutral-Black, Earth-Green) 1100 volt grade as earth lead drawn through in and including non metallic PVC conduit of size 25 mm dia (external) with wall thickness not less than 1.8 mm, ISI marked concealed in wall including accessories like bends, tees junction boxes, etc fixed in wall or ceiling etc. complete as directed by Engineer-in-Charge. NOTE: Two runs of cable with one run of earth wire and PVC conduit shall be measured & paid for as one length.
172	Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.
173	Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.
174	Taking down carefully UNSV submain wiring of any size and all as directed.
175	M&L for modular point wiring complete with 1.5 Sq mm single core PVC insulated but unsheathed multistranded copper conductor FR-LSH cable (RYBN) 1100 volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit with wall thickness not less than 1.8 mm including conduit accessories like bends, tees junction boxes, etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sq mm, single core, PVC insulated but unsheathed multi stranded copper conductor FR-LSH cable (Green) 1100 Volts grade as earth continuity wire connected to earth dolly and including piano sunken galvanized terminal boxes of same make of switch/ socket/ regulator with sleek and curvy cover plates, for mounting of piano switches, sockets, fan regulators complete all as specified and directed by Engr -in- Charge.
176	One light point controlled by one, one way switch.
177	One Ceiling fan/Exhaust Fan point controlled by one way switch.
178	One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.
179	One socket outlet 3 pin 5 amps on the independent board controlled by one no 5 Amp switch.
180	All as per srl item no.175 here-in-before but with 2.50 sq mm FRLSH copper wire with 2.50 Sqmm FRLS copper earth wire for indpendent 15 Amp point.
181	S&F Piano switch flush type single pole one way 6 Amp ISI Marked.complete all as specified and directed by Engr -in- Charge.
182	S&F switch flush type single pole one way 16 Amp ISI Marked.complete all as specified and directed by Engr -in- Charge.
183	S&F piano socket outlet 2 in 1, 5 pin, 6 Amp, 230 Volts flush type.complete all as specified and directed by Engr -in- Charge.
184	S&F piano socket outlet 2 in 1, 6 pin, 5 and 16 amp flush type, 230 Volts ISI Marked.complete all as specified and directed by Engr -in- Charge.
185	S&F resistance type electronic fan regulator Socket type stepped type A/C 240 Volts.complete all as specified and directed by Engr -in- Charge.
186	S&F Ceiling rose, two to three terminals, bakelite body, 230 volts, complete all as specified and directed by the Engineer-in-Charge.
187	Taking down and refixing Ceiling Exhaust Fan including 3 core PVC insulated copper conductor flexible cable of size 23/0.0076 (or eq. Size in mm) from ceiling rose to fan complete all as specified and directed by Engr -in- Charge.
188	Supply and fixing Cool White LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including AC decorative box type with driver, holder including,copper conductor cable of suitable size from ceiling rose complete complete, 4 ft long all as specified and directed by the Engineer-in-Charge.
189	S&F bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length(or bracket as approved by GE) including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as specified and directed by Engr -in- Charge.
190	Supply & Fixing only LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.
191	S&F MCB 145V, B Curve type, 10 kA, TPN/FP 40 to 100 AMP, with over load and short circuit protection, complete all as directed and directed by the Engineer-in-Charge.
192	S&F MCB 240V, C Curve type, 10 kA, 40 Amp to 63 Amp, SPN with over load and short circuit protection, complete all as directed and directed by the Engineer-in-Charge.
193	S&F MCB,240V B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as specified and directed by Engr -in- Charge.
194	Supply and fixing as MCB DB TPN (Double door) 4 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall all as specified and directed by the Engr-in-Charge.
195	Supply and fixing as MCB DB SPN (Single door) 12 Ways 240V including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.
196	Supply & Install Storage Type Geyser 25 Ltr Capacity BEE 5 Star rated with Copper inner tank heating element upto 2 KW including all fitting accessories, Hot water connection pipe,safety valve, thermostate, NRV etc required complete all as specified and as directed by Engr-in Charge.
197	M&L for metal clad enclosure three pin plug and scoket 240V complete with MCB SPN 20 Amps complete All as specified and directed by Engr-in-Charge.
198	M&L for sub main wiring with 2 run of 4 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engr -in- Charge.Note:- Two run of 4 Sq.mm. and one run of 4 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.
199	M&L for sub main wiring with 2 run of 10 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic PVC conduit 25 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as specified and directed by Engr -in- Charge.Note:- Two run of 10 Sq.mm. and one run of 10 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.
200	M&L for in repairs earthing complete with galvanised steel earth electrode 60cmx60cmx6mm buried directly in ground vertically to depth not less than 2.25m below normal ground level with top edge of the earth plate at a depth not less than 1.5m below ground level connected to and including GI earth lead wire 4 mm dia by means of nuts, bolts, check nuts and washer etc, made of GI and connected to test point and earth dolly all as shown in electrical plate No. 3 SSR Part-I 2009 and specified or indicated including excavation and earthwork in any type of soil PCC (1:3:6) Type C1 in chamber, precast RCC 50 mm thick in cement concrete (1:2:4) type B1, reinforced with welded steel wire fabric or XPM (Weight not less than 4.00 mm dia with cast iron frame, funnel with wire mesh, 20mm bore medium grade GI watering pipe, lugs, 15mm bore medium grade GI protection pipe, test point etc. complete all as specified and directed by Engr -in- Charge. Note:- (i) Item includes the cost of 7.5 metre GI pipe for protection of earth lead. (ii) Item includes the cost of 7.5 metre GI earth lead.
201	Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 35 sqmm 3.5 corecomplete all as specified and directed by Engr -in- Charge. Note : Earth work and brick work measured and paid separately
202	Supply and laying Un reinforced Precast concrete cable cover,type 2, class LV flat size 300 mm x 180 mm x 40mm all as and all as specified and direceted by Engr-in-Charge. .
203	Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part - 1.Note:. for the purpose of payment punned thickness will be measured and complete all as specified and directed by Engr -in- Charge.
204	Supply and fix GI tubing medium grade of 40 mm dia for cable protection.complete all as specified and directed by Engr -in- Charge.
205	M & L for road cutting(not more than 3.5 mtr in width of road) and excavation upto 60 cm below ground level and laying of 5 running mtr protection 40 mm dia GI pipe of Light grade and make good distrubuted suface by PCC 1:4:8 (nominal mix), type D-2, using 40mm graded crushed stone aggregate complete all as specified and directed by Engr -in- Charge. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Rajasthan Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repair To Bldg No. 216A Of Certain Unit And 35 X Garbage Bin And Its Connected Path At Hamid Bagh And Toilet And Bathroom Block Of Bldg No. P-1920 (Wing Number Ii, Vi, Vii) Of Certain Unit At Army Area Jodhpur Under Ge (Army) No. 0, Jodhpur-Rajasthan

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repair To Bldg No. 216A Of Certain Unit And 35 X Garbage Bin And Its Connected Path At Hamid Bagh And Toilet And Bathroom Block Of Bldg No. P-1920 (Wing Number Ii, Vi, Vii) Of Certain Unit At Army Area Jodhpur Under Ge (Army) No. 0, Jodhpur-Rajasthan

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us