|
| 1 | Taking down cement plaster of any description thickness including raking out joints hacking for key scrubbing down with water complete all as specified and directed by Engr-in-Charge. |
| 2 | Demolition of brick/stone masonry, built in cement mortar including all quoins, arches, pillars etc but exluding ashlar facings, dressed stone work and pre-cast concrete articles complete all as specified and directed by Engr-in-Charge. |
| 3 | Material and Labour for Brick work with sub class ‘B’ brick, straight or curved as plan exc 6m mean radiusbuilt in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge. |
| 4 | Material and Labour for rendering12 mm thick cement mortar 1:6 on fair faces of Brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed by Engr-in-Charge. |
| 5 | Material and Labour for preparation of new surface of wall and applying two coat of distemper oil emulsion over and including a coat primer above 1mm thick plaster of paris/wall care putty, on new surfaces complete all as specified and directed by Engr-in-Charge. |
| 6 | Material and Labour for complete removal of old decorated plastered & unplastered surfaces of walls by brooming down or steel wire brushing, scrapping down smoke soot, mould, moss and efflorescent salts, trading oil and greasy pots with and including applying two coat of distemper oil emulsion over a coat primer above 1mm thick plaster of paris/wall care putty, on old surfaces of wall complete all as specified and directed by Engr-in-Charge. |
| 7 | Material and Labour for rendering 15mm thick in two coats, 1st coat of 10 mm thick cement plaster in CM(1:6) and above 5mm thick in CM (1:4) as a 2nd coat of rendering mixed with WPC complete all as specified and directed by Engr-in-Charge. (Note : WPC shall be measured and paid separately under relevant item of BOQ) |
| 8 | Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) and including with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 9 | Material & Labour for complete removal of existing treatment on wall & applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces complete all as specified and directed by Engr-in-Charge. |
| 10 | Material and Labour for rendering 5 MM thick in cement mortar (1:3) furnished even & smooth without using extra cement on ceiling complete all as specified and directed by Engr-in-Charge. |
| 11 | Material and labour for prepration of new surfaces of and applying three coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 12 | Material and Labour for prepration of old surfaces applying one coat of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 13 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 14 | Material and Labour for Glazed ceramic coloured tiles (450x300mm x6-7mm/ 350x250 mmx6-7mm thick) on vertical surfaces as in skirting/dado with and including set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles over 10mm thick rendering in cement mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 15 | Material and Labour for Non skid cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.11 Sqm but n.exc 0.18 Sqm with and including set in neat cement slurry and pointed in white or coloured cement with pigment complete all as specified and directed by Engr-in-Charge. |
| 16 | Material and Labour for Non skid glazed cerermic coloured tiles 7 to 8 mm thick (Square/rectangular) area of each tile exc 0.18 Sqm but n.exc 0.38 Sqm with and including set in neat cement slurry and pointed in white or coloured cement with pigment complete all as specified and directed by Engr-in-Charge. |
| 17 | Material and Labour for 5mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor tiles complete all as specified and directed by Engr-in-Charge. |
| 18 | Material and Labour for15mm thick screed bed or bedding layer of cement mortar (1:6) as in floor for laying floor tiles complete all as specified and directed by Engr-in-Charge. Note:- (1) For First floor tile screed bed shall be mixed with WPC. WPC shall be measured and paid separately under relevant item of BOQ. |
| 19 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area exc 1.5 Sqm but n-exc 4 sqm each complete all as specified and directed by Engr-in-Charge. |
| 20 | Taking down chowkhats or frame with shutter w/o taking off shutter from the frame area not exc 1.5 Sqm each complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply and fixing Factory made single extruded WPC (Wood polymer Composite) Solid door/window/ceosetory window/ & other frames/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder / rice husk / wheat husk ) and non toxic additives (maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS Screws having minimum frame density of 750 Kg /cum, screw withdrawal strenght of 2200N (face) & 1100N (Edge), minimum compressive strength of 58 N/mm Sqr, modules of elasticity 900 N/mm Sqr and resistance to spread of flame of Class A category with property of being termite / borer proof, water/ moisture proof and fire retardant and fixed in positon with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer -in-Charge. (M.S. hold fast/lugs or SS dash fasteners shall be paid for separately). Note :- for WPC solid door / window frame, minus 5mm tolerance in dimension ie. depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.(For-cupboard) complete all as specified and directed by Engr-in-Charge. |
| 22 | Material and Labour for factory made 18mm thick shutter made out of 100% solid WPC Plain board of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade, calcium carbonate and natural fibres (Wood powders/rice husk/wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet single Extruded (inner) with density not less than 650kg/Cum an ISO 9001-2015 certified company, having good screw holding capacity (screw withdrawal strength of 2000N (face) & 1100N(Edge), Minimum compressive strenth of 50N/sq mm, Modulus of elasticity 850N/Sq mm and resistance of spread of flame of class A category with property of being Termite/Borer free. Water/Moisture proof, fire retardant and fixing with SS butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction of Engg-in-Charge, Material test certificate and authentication should be compulsory provided by the manufacturing company : For WC/Bathroom/Cupboard shutter/Kitchen rack/cabinet/Balcony Doors& cabinets/cupboard shelves complete all as specified and directed by Engr-in-Charge. Note : SS butt/piano hinges and necessary ss screw shall be paid separartely) |
| 23 | Supply and fixing magnet catcher/ Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed by Engr-in-Charge. |
| 24 | Supply and fixing pressed steel frames of size 125x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge. |
| 25 | Supply and fixing pressed steel frames of size 105x60mm for doors made out of PBC sheet 1.25mm thick with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed by Engr-in-Charge. |
| 26 | Supply and fixing mild steel flat iron as in holdfast including screwing or welding complete all as specified and directed by Engr-in-Charge. |
| 27 | Material and Labour PCC 1:3:6 type C1(using 20mm graded aggregate) as in hold fast for pressed steel frames and back filling of pressed steel frame complete all as specified and directed by Engr-in-Charge. |
| 28 | Supply and fixing 35 mm thick IInd class hard wood plain framed factory made paneled shutters with and including panel of 9 mm BWP commercial ply 12mm thick veneering on both veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS :1003 (part-I) kiln seasoned and chemically treated complete all as specified and directed by Engr-in-Charge. |
| 29 | Supply and fixing 35 mm thick IInd class hard wood glazed or skelton shutter factory made open rebated prepared to receive glass, gauge etc.without sash bars edges of framing plain fitted with cut & mitred beads for securing glass etc size of member all as per clause 8.23 (a) of SSR part-I complete all as specified and directed by Engr-in-Charge. |
| 30 | Supply and fixing window/ventilators (Double rebated) fabricated from roll framed sections made of galvanized steel colour coated/powder coated (Base steel as per IS 513 \\"D\\" quality galvanised as per IS 277 with Zinc of 120gms/Sq.mtr) with total coated thickness of 0.6mm and section of frame should be of 72mm x 55mm, section for mullion should be cf 72mm x 50mm, section for shutter frame should be of 47mm x 20mm, section for fixed glass bead should be of 12mm x 12mm and section for fly mesh should be of 40mm x 20mm, coated section should be with primer coat of Epoxy primer of 5-7 microns thick, finish painted with polyester upto 50-60 microns thick including 5mm thick plain glass stainless steel 32 gauge fly mesh of 304 grades with 144 holes per square inch and grill made of 10mm sq MS bars welded to at 150mm center to center, 6mm x 12mm MS flat (total grill unit should be power coated and fixed to window frame with screws) (a) FIXING DETAILS :- Section for frame Glazed shutter and Mesh shutters should be cut to lenght and miter joined with polyropylene cornar brackets, mullion section should be joined with Frame /Mullion using Mullion Cap ethyl proplene damein monomer (EPDM) gasket should be used all around glass in shutter and fixing glass rubber, Gasket should be around glass in shutter and fixed glass. rubber gasket should be used around fly mesh to fix mesh in mesh shutter. (b) ACCESSORIES :- Each glazed shutter and mesh shutter should be provided with SS pivot hinges- 1 set, seccolor stay. window frame should be fixed to brick/concrete masonry by using Nylon self expanding caps and driving MS electoplated 80mm long screw into the caps through frame complete all as specified and directed by Engr-in-Charge. |
| 31 | Supply and fixing Solid PVC door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube , suppling but single side prelam PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with prelam sheetand fixing in opening as per specification and drawing complete all as specified and directed by Engr-in-Charge. (Make:- ECO-4000 series or equivalent as approved by GE) |
| 32 | Supply and fixing 30 mm factory made solid panel PVC door shutter consisting of frame made out of MS tube for top and bottom rail,MS frame shall be covered with heat moulded but wood grain printed PVC sheet used but Single Side Prelam PVC sheet used instead of Plain colour PVC sheet and stile & rails having one side feathered edge and on other side 10mm 900 bent edge. and fixing in the frame and site complete all as specified and directed by Engr-in-Charge. (Note:- PVC door for bath/WC & Cubboard) |
| 33 | Supply and fixing hasp and staple saftey type aluminium anodised with mild steel hinges pin including bolt to hing plate and fixed with screw size 125mm complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge. |
| 35 | Supply and fixing in reapair stainless steel wire cloth 0.36 mm nominal dia and average width of aperture 1.40 mm and fixed with tined tacks or galvanised wire staples complete all as specified and directed by Engr-in-Charge. |
| 36 | Supply and fixing 100 mm size butt hinges medium weight cold rolled mild steel complete all as specified and directed by Engr-in-Charge. |
| 37 | Supply and fixing Floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long complete all as specified and directed by Engr-in-Charge. |
| 38 | Supply and fixing in repair floor doors stoppers of aluminium alloy body and tenque anodisede with hard drawn steel spring fixed in floor 150mm long complete all as specified and directed by Engr-in-Charge. |
| 39 | Supply and fixing Aluminium anodised barrel tower bolts of extruded section and fixed 200 mm long complete all as specified and directed by Engr-in-Charge. |
| 40 | Supply and fixing Aluminium handles cast type anodised 150mm long complete all as specified and directed by Engr-in-Charge. |
| 41 | Supply and fixing 300 mm long aluminum anodised sliding door bolts ,Aluminium alloy,door bolt with hasp,staple (bolt type) and fixingclips of sheet, cast or extruded sections and fixing bolts andsliding bolts of extruded sections or cast-aluminium complete all as specified and directed by Engr-in-Charge. |
| 42 | Supply and fixing mild steel 300mm ordinary rat tail rod door spring , patteren including roller and roller plate complete all as specified and directed by Engr-in-Charge. |
| 43 | Material and labour for preparation of new wood surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over and including coat of pink primer complete all as specified and directed by Engr-in-Charge. |
| 44 | Material and Labour for prepraration of old or previously untreated surfaces of wood and applying one coats of synthitic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 45 | Taking up or down 20 mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed by Engr-in-Charge. |
| 46 | Supply and fixing 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed by Engr-in-Charge. |
| 47 | Supply and fixing in repair 15mm size Bib taps, cast copper alloy with crutch or butterflyhandle, screweddown, screwed for iron pipe or forbrass ferrule andfixed but fancy type chromium plated complete all as specified and directed by Engr-in-Charge. |
| 48 | Supply and fixing as in repair 15mm Stop valves, cast copper alloy,screwed down,high pressure,with crutch orbutterfly handle,screwed bothends for ironpipe or forunions and fixedbut fancy type, chromiumplated with longshank and cup(concealed type) complete all as specified and directed by Engr-in-Charge. |
| 49 | Supply and fixing in repair Orrisa pattern WC in ground floor vitreous china white of size 580mmx440mm fixed in repair incl provision of lime concrete bedding incl breaking up of existing damaged WC seat and connecting flush pipe etccomplete all as specified and directed by Engr-in-Charge. |
| 50 | Supply and fixing in repair PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified and directed by Engr-in-Charge. |
| 51 | Supply and fixing in repairs10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as specified and directed by Engr-in-Charge. |
| 52 | Supply and fixing in repair brass chromium plated shower plated shower rose 125 mm size with or without swivel joints ,any size,including fixing to steel pipe or union as specified and directed by Engr-in-harge. |
| 53 | Supply and fixing in repair vitreous china wash basin(flat back or angle back type) any size in repair ,including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe complete all as specified and directed by Engr-in-Charge. |
| 54 | Supply and fixing in repair Pillar taps 15 MM, cast copper alloy, with capstan heads,chromium plated,screwed down high pressure,with or without lettered Hot' or 'Cold' with long screwed shanks and fly-nuts,screwed for iron pipe and fixed but fancy type all as specified and directed by Engr-in-Charge. |
| 55 | Supply and fixing in repair brass chromium plated tubular towel rail 20mm dia(D) type 60cm long between flanges complete all as specified and directed by Engr-in-Charge. |
| 56 | Material and labour for preparation of new steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and directed by Engr-in-Charge. |
| 57 | Material and Labour for prepraration of old or painted surfaces of steel and applying one coats of synthetic enamel paint complete all as specified and directed by Engr-in-Charge. |
| 58 | Demolition of stone slabs and tiles of any description or thickness Laid, bedded and pointed in any mortar in floors, aprons complete all as specified and directed by Engr-in-Charge. |
| 59 | Material and Labour granite slab (of any type) 18 mm thick (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in 15mm thick screed bed of cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match the shade of granite complete all as specified and directed by Engr-in-Charge. |
| 60 | Rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situation complete all as specified and directed by Engr-in-Charge. |
| 61 | Material and Labour for machine cut kota stone slab 18 mm thick as in flooring / stair case landing, laid over & including. 15mm thick cement screed base in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 62 | Material and Labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/steps /floor laid over & including.10mm thick cement screed base in CM 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. Note:- Single pices in riser |
| 63 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed by Engr-in-Charge. |
| 64 | Supply and fixing in repair 110 mm PVC (SWR) Waste/rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 65 | Supply and fixing in repair 75 mm PVC (SWR) Waste/rain water pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 66 | Supply and fixing PVC (SWR) bends with provided with access 110 mm dia complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fixing PVC(SWR) bends with access 75 mm dia complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply and fixing PVC(SWR) junction double,(Single T),equal or unequal. 110 mm dia with acess door complete all as specified and directed by Engr-in-Charge. |
| 69 | Supply and fixing PVC(SWR) junction double,(double y),equal or unequal. 75 mm dia with access door complete all as specified and directed by Engr-in-Charge. |
| 70 | Supply and fixing PVC(SWR) junction single(single y),equal or unequal. 75 mm dia with access door complete all as specified and directed by Engr-in-Charge. |
| 71 | Supply and fixing PVC (SWR) vent cowl 110 mm dia complete all as specified and directed complete all as specified and directed by Engr-in-Charge. |
| 72 | Supply and fixing PVC (SWR) vent cowl 75 mm dia complete all as specified and directed complete all as specified and directed by Engr-in-Charge. |
| 73 | Supply and fixing 110mm PVC (SWR) reducers complete all as specified and directed by Engr-in-Charge. |
| 74 | Supply and fixing in repair 75mm dia PVC floor trap with CP grating including jointing to waste pipe with cement solvent complete all as specified and directed by Engineer-in-Charge. |
| 75 | Demolition of cement concrete in ground floor and paving not exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 76 | Material and Labour for 75 mm thick PCC 1:2:4 type B2 (40mm graded aggregate) as in plinth protection/floor sub base complete all as specified and directed by Engr-in-Charge. |
| 77 | Material and Labour 75mm thick PCC 1:4:8 Type D-2 using (40mm crushed stone aggregate) as in sub base floor complete all as specified and directed by Engr-in-Charge. |
| 78 | Material and Labour for Sand filling under floors or in foundations incl. watering and consolidation complete all as specified and directed by Engr-in-Charge. |
| 79 | Material and Labour 60mm thick machine pressed precast concrete interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-35 Grade as approved by GE laid in flooring and joints filled/broomed with fine sand complete all as specified and directed by Engr-in-Charge. Note: Old paver block retrieved sahll be taken by contractor as Sch of credit. |
| 80 | Demolition for cement conc exc 15cm thickness but above ground floor as sunken floor complete all as specified and directed by Engr-in-Charge. |
| 81 | Material and Labour for cement concrete type E - 2, 1:5:10 (using 40 mm graded stone aggregate) as in sunken flooring complete all as specified and directed by Engr-in-Charge. |
| 82 | Material and Labour for applying two coats of water proofing coating on the entire surface of sunken portion complete all as specified and directed by Engr-in-Charge. Note:- (Make of Shalimar supercrete or Nitobond or equivalent as approved by GE) |
| 83 | Material and Labour for 15mm thick cement screed in CM 1:3 admixed with integrd water proofing compound FOSROC’s complast X 421 IC @ 130ml per bag of cement incl a bonding coat of FOSROC”s Nito bond AR cement slurry/STP NO 1 liquid @ 200ml per bag of complete all as specified and directed by Engr-in-Charge. |
| 84 | Dismantling of brick tiles / brick bats / old water proof treatment upto any depth or terracing tiles, shingle layer on roofs complete all as specified and directed by Engr-in-Charge. |
| 85 | Material and Labour for Removing building materials/debris/aggregate/spoils etc to a distance of 100m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination complete all as specified and directed by Engr-in-Charge. |
| 86 | Material and Labour PCC (1;2:4) type B-1 using 20mm graded stone aggregete as providing, cement concrete in roof kerbs or mud stops, rounded or chamfered on edges complete all as specified and directed by Engr-in-Charge. |
| 87 | Material and Labour for wire brushing neat cement slurry with 3kg of cement per sq m at top and bottom of base coat and cleaning top surface all as specified and directed by Engr-in-Charge. |
| 88 | Material and Labour for PCC padding average 40 mm thick to be provided in slope PCC 1:2:4 type B-1, using 20mm graded aggregate complete all as specified and directed by Engr-in-Charge. |
| 89 | Material and Labour plastering 10mm thick in cm 1:4 mixed with WPC over cleaned concrete surfaces complete all as specified and as directed by Engr-in-Charge. Note: WPC shall be measured and paid separately under relevant item of BOQ. |
| 90 | Supply only integral waterproofing compound . |
| 91 | Material and Labour for prepration of roof top surfaces,providing and applying single component elastic cold applied polyurethene modified acrylic roofing system,co-elastic technology (CET) based on modified polyurethene and fully fibre reinforced,having sun reflectivity index(SIR) of 106 on top of concrete roof surface.all crackes upto 3mm at corner joints,channel and parapets should be treated with crack seal.applying three coats including one coat of primer of shali urethene BTD/sikalastic 560/smart care damp proof ultra having coverage @ min 0.75kg/m2 and dilution upto 10% and laying reinforced fibre net and applying two coats of shaliurethene BTD/sikalastic 560/smart care damp proof ultra @ total consumption 2kg/m2 in two coats for maintaining minimum dry film thickness 1.5 mm and elongation at break of free film of approx 350% the materials shall be applied with brush or roller complete all as specified and directed by Engr-in-Charge. |
| 92 | Demolition on reinforced cement concrete of any description and in any position not otherwise complete all as specified and directed by Engr-in-Charge. |
| 93 | Material and Labour for RCC(1:2:4), type B1 (using 20 mm graded stone aggregate) Precast cement concrete cover slab for tank staging, manhole cover and similar article with plain face, set in cement mortar 1:4 including neccesary form work complete all as specified and direceted by Engr-in-charge |
| 94 | Material and Labour for Mild steel bars 10mm dia and over TMT bars cut to length bent to shape reqd including cranking ,bending spirally for hooping for columns hooking bends and binding with including mild steel wire (annealed) not-less than 0.9mm dia or securing with clips quality complete all as specified and directed by Engr-in-Charge. |
| 95 | Material and Labour for repairing RCC projection chajjas, roof, facia etc. by necessary preparation, scraping, cutting, chiseling derusting and cleaning exposed reinforcement surfaces of damaged, loose RCC surfaces with cement concrete (1:1.5:3) using 12.5mm graded crushed stone aggregates and reinforcement with welded mesh of weight exc 2Kg per Sqm but n.exc 3Kg/Sqm (if required) with or without facia and finished with cement morte 1:3 using coarse sand and work in patches area n.exc 5 Sqm and thickness RCC member n.exc 70mm incl necessary formwork and applying two coats of finishes to match with the existing surfaces at any height complete all as specified and directed by Engr-in-Charge. |
| 96 | Supply and fixing 40 mm flap width continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engr-in-Charge. |
| 97 | Material and Labour Providing and injecting chemical emulsion for Post Constructional Anti-termite TreatmentAlong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified by Engineer-in-charge. |
| 98 | Material and Labour Providing and injecting chemical emulsion for Post Constructional Anti-termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed by Engr-in-Charge. |
| 99 | Material and Labour Providing and injecting chemical emulsion for Post Constructional Anti-termite At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ .5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and directed by Engr-in-Charge. |
| 100 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed by Engr-in-Charge. |
| 101 | Supply and fixing rolled Mild steel work as in joist,channel,angle,or tee section,fixed independently,without connecting plates,etc for water tanks staging /coolar stand and like including caps bases, splices etc built up from two or more beam or channel sections or angles with plates or pipe section including all lattice bars, stiffeners, gusset plates complete all as specified and directed by Engr-in-Charge. (Fe-410-W(Gde E-250)Quality-A) |
| 102 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10cm but not exc 20 cm girth complete all as specified and directed by Engr-in-Charge. |
| 103 | Supply and fixing in repair 750 ltr rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position of any description and removing the debris away from the site including dismentling complete all as specified and directed by Engr-in-Charge. |
| 104 | Supply and fixing in repair 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified and directed by Engr-in-Charge. |
| 105 | Supply and fixing in repairs; stainless steel plate rack made out of 1mm thick steel sheet of size 75cm x 90cm x 25cm with fixing arrangements complete all as specified and as directed by Engineer-in-Charge. |
| 106 | Supply and fixing in repairs harrison rails,anodised alluminium alloy with fixing brackets, stops, rollers etc of ss 20 mm dia with decorative ss brackets & knobs all as directed by Engr-in-charge |
| 107 | Supply and fixing in repair sinks with drainage board made of stainless steel lmm thickkitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160m complete all as specified and directed by Engr-in-Charge. |
| 108 | Supply and fixing in repair 600 mm x 450 mm beveled as mirror of selected quality glass,mounted on 6 mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screwes and cup washers complete all as specified and directed by Engr-in-Charge. |
| 109 | Taking down copper/aluminium point wiring for (light, fan , socket or power and bell) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets bell etc. and making good the distrubed surfaces on wall/floor complete all as specified and directed by Engr-in-Charge. |
| 110 | Taking down MCB DB TPN/SPN/ and load of any make and type inclduing dismantling all electrical connections from MCBs/MCCB/isolators and making good the distrubed surface complete all as specified and directed by Engr-in-Charge. |
| 111 | Taking down Meter panel with with four nos single phase meter any make and type inclduing dismantling all electrical connections from meters and making good the distrubed surface complete all as directed by Engineer-in-Charge. |
| 112 | Disconnecting and taking down old existing light fitting of any description from any position complete all as specified and dircted by Engr-in-Charge. |
| 113 | Disconnecting, taking up the existing electric fan and submitted to mes office complete with all accessories complete all as directed by Engineer-in-Charge. |
| 114 | Disconnecting and taking down old existing sub main wiring of any description from any position complete all as specified and dircted by Engr-in-Charge. |
| 115 | Material and Labour for Point wiring using proper colour coding complete with 1100 Volts grade 1.5 Sq.mm, single core, PVC insulated,unsheathed cable with multistranded copper conductor with ISI mark FRLS grade, conforming to IS-694 in and including PVC medium grade conduit not less than 25mm dia. ISI marked with all accessories concealed in wall/ceiling/ floor /roof etc, including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ sockets including 1.5 Sq.mm PVC insulated, unsheathed, multistranded copper conductor, FRLS 1100 volts grade (green colour) as earth wire, connected to common earth dolly for:- |
| 116 | One light point/ fan/Exhaust controlled by one switch. |
| 117 | One three pin switch socket 5 amps outlet on same board. |
| 118 | One three pin switch socket 5 amps outlet on Independent board. |
| 119 | One Bell point controlled by one switch. |
| 120 | Point wiring using proper colour coding complete all as specified with 1100 Volts grade, 2.5, Sqmm PVC insulated, FRLS, unsheathed, cable confirming to IS-694,PartII, ISI marked with Multistranded copper conductor cable in and including PVC conduit. |
| 121 | One light point controlled by two 2-way switches, with cables 1.5 sq. mm size |
| 122 | Supply and fixing Switch piano, flush type single pole, one way 5 Amp completecomplete all as specified and directed by Engr-in-Charge. |
| 123 | Supply and fixing Switch piano, flush type single pole, 2- way 5 Amp complete all as specified and directed by Engr-in-Charge. |
| 124 | Supply and fixing Socket outlet 3 pin, 5A, flush type complete all as specified and directed by Engr-in-Charge. |
| 125 | Supply and fixing Switch piano, flush type single pole, one way 15 Amp complete all as specified and directed by Engr-in-Charge. |
| 126 | Supply and fixing Bell push, flush type, 5 amp complete all as specified and directed by Engr-in-Charge. |
| 127 | Supply and fixing Socket outlet 2 in 1, 3 pin, 5 and 15 amp flush type complete all as specified and directed by Engr-in-Charge. |
| 128 | Supply and fixing ceiling rose surface 65x50mm with three terminals complete all as specified and directed by Engr-in-Charge. |
| 129 | Supply and fixing stepped type electronic fan regulator flush type on the existing phenolic laminated sheet etc. as reqd complete all as specified and directed by Engr-in-Charge. |
| 130 | Supply and fixing lamp holder PVC/Polycarbonate insulated body with back plate suitable for angle/batten fitting complete all as specified and directed by Engr-in-Charge. |
| 131 | Supply and fixing Sheet metal enclosure DB SPN, 8 way with 200 Amp rated bus bar, 240 V, double door . for fixing MCB’s, isolators etc., having IP-43 protection, flush mounting complete all as specified and directed by Engr-in-Charge. |
| 132 | Supply and fixing in repair amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) SPN 40 to 63 AMp in the MCB DB complete with connection testing and commissioning complete all as specified and directed by Engr-in-Charge. |
| 133 | Supply and fixing in repair MCB,SP, 6 Amp to 32 Amp, 240 Volt, 50HZ, 10 KA, `C` Series, making electrical connection with the help of Lugs/thimbles complete all as specified and directed by Engr-in-Charge. |
| 134 | Supply and fixing LED lights fitting 1x 20W, 220V AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 135 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed by Engr-in-Charge. |
| 136 | Supply and fixing Buzzer, Ding Dong AC. 230 volts, single pole complete all as specified and directed by Engr-in-Charge. |
| 137 | Supply and fixing submain wiring with 6 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20mm dia medium grade and its accessories including one run of 6 sqmm PVC insulated copper conductor to wall with and including 3mm thick conduit complete all as specified and directed by Engr-in-Charge. . Note:- (i) surface conduit shall be laid in celing portion only.(ii) 2 Run of main wire and 1 run of earth wire shall be measured as one unit length. |
| 138 | Supply and fixing submain wiring with 2X 4 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20 mm dia medium grade and its accessories including one run of 4 sqmm PVC insulated copper conductor to wall with and including 3 mm thick conduit complete all as specified and directed by Engr-in-Charge. Note:- (i) surface conduit shall be laid in celing portion only.(ii) 2 Run of main wire and 1 run of earth wire shall be measured as one unit length. |
| 139 | Supply and fixing submain wiring with 2X 4 sqmm (nominal area) PVC insulated FRLSH, unsheathed, multistrand, 1100 volts grade copper conductor cable single core. drawn through in and including non metalic PVC concealed conduit not less than 20 mm dia medium grade and its accessories including one run of 4 sqmm PVC insulated copper conductor to wall with and including 3 mm thick conduit complete all as specified and directed by Engr-in-Charge. Note:- (i) surface conduit shall be laid in celing portion only.(ii) 2 Run of main wire and 1 run of earth wire shall be measured as one unit length. |
