|
| 1 | Taking down cement plaster on brick or stone walls, etc, including raking out joints, hacking for key, scrubbing down with water , etc complete all as specified and directed. |
| 2 | Dismantling floor, hearth or wall tiling including cement mortar, bedding removing serviceable tiles to store and rubbish off the premises all as specified and directed . |
| 3 | M&L for Ready mix plaster 15mm thick on bricks or concrete surface including dubbing coat to match with existing with necessary scaffolding upto 18m height incl mix with water proofing compound Make Easy plast from wall plast chemplast, Ready Plast from ultra tech complete all as specified. |
| 4 | Supply only liquid water proofing compound |
| 5 | Demolition of Brickwork or stone/ boulder masonry, built in CM incl all quoins, arches, pillars, etc, complete all as specified and directed . |
| 6 | M & L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10 cm in width and setting in Cement mortar (1:4) mortar, complete. |
| 7 | M&L for rendering 15 mm thick cement plaster in CM 1:4 on brick Work or concrete surfaces including finished even and smooth without using extra cement complete all as specified and directed. |
| 8 | M&L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in coping/benching including weathering throting ans necessary formwork complete all as specified. |
| 9 | M&L cement concrete 1:2:4 Type - B1 ( using 20mm graded stone aggragate) as in surface channel & drain with water proofing chemical for bottom of SWT all as specified and directed |
| 10 | M&L for preparation of new plaster surfaces applying two coat cement base paint over a coat of primer complete all as specified and directed. |
| 11 | M&L for leakage / seepage proof coating consisting of preparing the new/old surfaces of existing exterior walls, parapet walls, chajjas, soffit of beams, columns etc. and applying Primeseal primer of M/s Dr Fixit or equivalent chemical of M/s STP Ltd as approved by the GE or one coat of Chemstic PDE 600 elastomeric coating (and allowing to dry for 8hrs) under torch dry condition and subsequently applying two coats of water proofing decorative elastomeric coating system Raincoat of M/s Dr Fixit with DFT 100microns or Shalicryl 215 of M/s STP Ltd or Chemstic PDE 600 elastomeric coating (the surfaces after painting one coat shall be allowed to dry for 6 to 8hours before application of next coat) including necessary scaffolding etc complete all as per manufacturer instructions and all as specified & directed.Notes (i) The aforesaid treatment shall be got executed by the contractor from the authorised applicator of the manufacturer(s) and also necessary authenticated documents on account of above shall be submitted by the contractor to the GE. (ii) Painting shall be carried out in camouflage pattern as aprroved by the GE. |
| 12 | M&L for Ready Mix concrete of M 40 Grade in pavement/hardstanding of flexural strength 40kg/per square centimetre in field using 400 kg of cement per cubic metre including preparation of surfaces and form work if required. complete all as specified and directed. |
| 13 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. |
| 14 | Dismantling wrought iron or mild steel work of any description not otherwise provided for etc, complete all as specified and directed. |
| 15 | M&L preparation of new steel surfaces of any description exc 10cm wiidth or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified. |
| 16 | S&F Aluminium expanded mesh thickness not less than 16 gauge (1.58mm) opening size not more than 1/2 inch bright fininsh fixing with SS screws as per site requirement complete all as specified and size of mesh approved by Engr-in -charge. |
| 17 | Writing letters or figures (Block.Roman, Italic or Indian) n exc. 30 cm high complete including all necessary scaffolding as required all as specified and directed. |
| 18 | S&F glow sign board of size 600x450mm height up to 1.50 from GL with reflective letters details of letters approved by engr-in -charge like Tank No, capacity, Cleaned on, next Due etc embeded in PCC with necessary ecxavation and earth work |
| 19 | S&F in repair Gun metal globe or gate valves, with iron wheel head screwed both ends for iron pipe of 20 mm dia, all as specified and directed |
| 20 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers/ Epoxy fillers shall be provided wherever required to close voids between sheets, sheets and wall, sheet & fastners etc. completely all as specified and directed. upto maximum height of 16 Mtr Please Enable Macros to View BoQ information |
| 21 | S&F Pre- painted galvalume sheet having aluminum zinc coating with hot dip alloy of 55% Aluminium 43.5% Zinc 1.5% Silicon and finished with resin coat on both surfaces @ 150 gm/sqm of coating (total both surfaces) having overall width and laid width as specified GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with fixed using hot dip galvanized, self drilling and self tapping screws neoprene and EPDM washers. Penetrations and laps in sheet shall be sealed by using proper sealant profile. HDPE fillers/ Epoxy fillers shall be provided wherever required to close voids between sheets, sheets and wall, sheet & fastners etc. completely all as specified and directed. upto maximum height of 16 Mtr Please Enable Macros to View BoQ information |
