|
| 1 | Dismantling asbestos cement (corrugated or semi-corrugated etc) sheets in roof covering including ridges, hips, valleys and flashings etc complete all as specified and as directed. |
| 2 | M&L for Pre-painted galvalume aluminium zinc coating (AZ-150) GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 3 | M&L Pre-painted galvalume aluminium zinc coating (AZ-150) GI based Plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutters, fixed with self tapping screw complete all as specified and directed. |
| 4 | Dismantling timber scantlings (framed work) exc 40 Sqcm in section, in any position complete all as specified and directed. |
| 5 | Dismantling wrought iron or mild steel work of any description not otherwise provided for door gates, grills, purlins, rafter or truss complete all as specified and directed. |
| 6 | M&L for Mild steel work in tubular trusses, purlins, vertical posts including special shaped washer, angle cleats, fish plates, gusset plates, base/ bearing plates, bolts and nuts etc. complete using ERW or induction butt welded tubes conforming to 1161-1979 grade st 240 complete all as specified and directed. |
| 7 | S&F MS Framed work such as grills gratings, door and cooler stand, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars confirming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 8 | M&L Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and as directed . |
| 9 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/ blankets, any thickness, including cover fillets complete all as specified. |
| 10 | S&F 605x605mm of grid GI frame work for seamless ceiling comprising of GI perimeter channel 0.55mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre/ intermediate channel 0.9mm thick having two equal flanges of 15mm each and web of 45mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exceeding 1.2m length) of 0.55mm thickness having kurled web of 50mm and flange of 26mm each with clips of 10.5mm fixed to the intermediate channel at 457mm centre to centre including Hangers 6mm dia GI (upto 1200mm length adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flate 40X30mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified including Providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturer’s instructions and applying two coats of distemper over 1mm thick wall care putty over ceiling board complete all as specified and as directed. |
| 11 | S&F in repair Hollow PVC Wall lining consisting of 5-10mm thick plain colour PVC sheet and including 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on wall to make PVC frame for fixing the PVC sheet inclusive of solvent cement complete all as specified and directed. |
| 12 | Demolition of brick work or stone masonry or solid concrete masonry built in cement mortar including pillar etc. complete all as specified |
| 13 | M&L for brick work with sub class 'B' burnt clay bricks, straight or curved on plan exc 6m mean radius, built in cement and sand mortar 1:6 complete all as specified and directed. |
| 14 | Taking down cement plaster of any description including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 15 | M&L for rendering 15mm thick on other than fair faces of brick wall or concrete surface in cement mortar 1:4 mixed with liquid water proofing compound as per manufactures instructions finish the surface to even & fair complete all as specified and as directed.Note : Liquid WPC shall be measured and paid separately under relevant item of this BOQ. |
| 16 | M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement and sand mortar 1:6 complete all as specified and as directed. |
| 17 | Supply only liquid water proofing compound complete all as specified and directed. |
| 18 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted over and including 1mm thick wall care putty complete all as specified and as directed. |
| 19 | M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of oil bound distemper, white or tinted over and including 1mm thick wall care putty complete all as specified and as directed. |
| 20 | M&L for preparation of newly plastered surfaces of walls and applying two coats of Exterior weather proof Acrylic paint (APEX) white or tinted over and including 1mm thick wall care putty complete all as specified and as directed. |
| 21 | M&L for complete removal of existing treatment from old plastered surfaces of walls and applying two coats of Exterior weather proof Acrylic paint (APEX) white or tinted over and including 1mm thick wall care putty complete all as specified and as directed. |
| 22 | Demolition of cement concrete (unreinforced) in ground floors and paving’s not exc 15cm thick, including removing rubbish off the premises complete all as directed |
| 23 | M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in plinth protection, finishing cement concrete surface even and smooth using extra cement. |
| 24 | M&L for 25 mm (Average) thickness cement concrete type- B0 1:2:4 (using 12.5 mm graded stone aggregate) as in levelling course below tiles etc finishing cement concrete surface even and fair without using extra cement compete all as specified and as directed. |
| 25 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed. |
| 26 | M&L for Vitrified Ceramic light shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.36 sqm but not exceeding 0.80, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed. |
| 27 | All as per serial item No 26.00 here in before but as in skirting/dado laid over and including 10 mm thick rendering in cement and sand mortar 1:4 complete all as specified and as directed. |
| 28 | M&L for Non Skid ceramic joint free coloured tiles 7 to 8 mm thick, (Square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed. |
| 29 | M&L for 75 mm thick PCC 1:4:8 type D2 using 40 mm graded aggregate as in sub base complete all as specified and directed of Engineer-in-charge |
| 30 | M&L for non skid ceramic ENDURA coloured tiles 7-8mm thick (square/rectangular) area of each exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors set and jointed in neat cement slurry & pointed with coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement and sand mortar 1:4 complete all as specified and as directed. |
| 31 | M&L for Glazed ceramic coloured tiles in 600x300X7mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10 mm thick rendering in cement and sand mortar 1:3 complete all as specified and as directed. |
| 32 | Demolition of Stone slabs and tiles of any description or thickness (except ceramic tiles) in floors, aprons etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 33 | M&L for 16-18mm thick Granite slab work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like laid over and including 20mm thick screed bed in cement mortar 1:4 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including rounded/half rounded edge and providing hole for gas pipe in pre-cast slab as well as in granite slab of cooking platform complete all as specified and as directed. |
| 34 | M&L Machine cut Kota stone slab flooring 20-25 mm thick over cement screed base laid and jointd with pigment to match the shade of the slab including rubbing and mirror polishing including screed bed and bedding layer 15mm thick for laying floor finishes use cement and sand mortar 1:4 complete all as specified and directed by Engr-in-Charge. |
| 35 | Taking down chowkhat or frames with shutters w/o taking off shutters from frame area n.exc 1.50 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 36 | Taking down chowkhat or frames with shutters w/o taking off shutters from frame area 1.5 Sqm but n.exc 4.00 Sqm each complete all as specified and directed by Engineer-in-Charge. |
| 37 | S&F Solid WPC (Wood Polymer Composite) single extruded Door Frame of size 90mm x 45mm single rebate supplying & fixing in opening as per specification & drawing complete all as specified and as directed. |
| 38 | S&F factory made Solid WPC (Wood Polymer Composite) single extruded Door Shutter 28 to 30mm thick comprising of virgin polymer of K value of 58-60 (suspension grade), calcium carbonate and natural fibers ( wood powder/ rice husk/ wheat husk) and non toxic additives ( maximum toxicity index of 12 for 100 gms) having minimum density of 900 N( Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to speed of flame of class A category with properly of being termite/ borer proof water/ moisture proof and fire retardant and fixing with stainless full body threaded star headed counter sunk S.S. screws, fixing in frame at site complete all as specified and as directed. |
| 39 | S&F Aluminium, anodised, barrel tower bolts 150mm long of extruded section and fixed complete all as specified and as directed. |
| 40 | S&F Extruded Aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and as directed. |
| 41 | S&F 100mm long stainless steel butt hinges complete all as specified and directed. |
| 42 | M&L for Aluminium frame powder coated (minimum thickness of powder coating 50 micron) for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 43 | S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. fixing in frame at site complete all as specified and as directed. |
| 44 | S&F sheet glass of selected quality 5.5mm thick and glazing to aluminium frame in squares exc. 0.5 sqm metre in each pane complete all as specified and as directed. |
| 45 | S&F 5mm thick, ACP sheet including rubber gas cut etc in aluminium door shutter complete all as specified and directed by Engr in charge. |
| 46 | S&F in repairs aluminium (extruded section body) Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg and fixed complete all as specified and as directed. |
| 47 | S&F in repair aluminium partition wall of section as in frame /single double grove of size 63.5 x 38.1, 2mm thick including 5mm thick tinted glass, 5 mm thick ACP sheet with all necessary fittings. Vertical section has to be supported with angle of size 65 x 65 x 6 mm thick including making good of existing surface complete all as specified. |
| 48 | S&F Aluminium powder coated three track sliding windows with three sliding shutters, (One with stainless steel jalli and two with glass panes) aluminium sections not less than 1.10kg per meter for bottom and top tracks and side track 0.98 kg per meter, bottom shutter frame 0.55 kg per meter, top shutter frame 0.55 kg per meter, shutter sides 0.55 kg per meter and interlock sides 0.45 kg per meter including suitable nylon beading, channel, gasket, rollers Maruthi lock with handles etc including cost of 5mm thick tinted sheet glass and stainless steel wire mesh with 0.36mm nominal dia of wire and 1.18mm aperture complete all as specified and directed. |
| 49 | S&F in repair curtain rod stainless steel chromium plated 20mm dia with bracket knobs including end cap complete all as specified and directed. |
| 50 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth of brick walls complete all as specified and as directed. |
| 51 | M&L for galvanized steel water tubing medium grade (ISI marked) of 15mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, including taking up or down existing unserviceable steel water tubing and connections of 15mm bore complete all as specified and as directed. |
| 52 | M&L for galvanized steel water tubing medium grade (ISI marked) of 20mm bore with & including all fittings, fixed to walls and ceilings or laid in floors, including taking up or down existing unserviceable steel water tubing and connections of 20mm bore complete all as specified and as directed. |
| 53 | Supply and fixing in repair 500 litres capacity white colour triple layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe 20 mm bore dia complete all as specified and as directed. |
| 54 | S&F in repair gun metal, globe or gate valves 20 mm bore dia, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 55 | S&F in repair Vitreous china wash down water closet pedestal pan white, Plastic water closet seat, closed pattern with recessed bottom, and seat cover and mild steel chromium plated or aluminium hanging device, complete all as specified and as directed. |
| 56 | S&F in repair vitreous chinaware wash hand basin white flat back size 545x400mm including pedestal pillar excluding taps, chain but including brackets waste coupling and waste pipe complete all as specified and as directed. |
| 57 | S&F in repair EWC 650x340x740mm S trap Athos One-Piece Rimless Western Commode with In-Built Jet & Syphonic Flushing System combination pattern including cistern and other connected accessories and fixing to floor complete all as specified and directed. |
| 58 | S&F in repair stainless steel Jet spray with 1.20 mtr hose fixed with EWC complete all as specified and as directed. |
| 59 | S&F in repairs Viterous china squatting pan, Órissa' pattern, size 580 x 440mm white, with integral foot rests including connection and fitting to trap, and to flushing pipe complete and making good to wall or floor tilling to match the existing complete all as specified and as directed. |
| 60 | M&L in repair single lever WHB mixer 15mm bore cast copper alloy chromium plated 450mm braided connection pipe without pop up complete all as specified and as directed.Make : Jaquar Cat part No KUP-CHR-35011BPM/ Kohler Cat Part No: K-33063IN-4ND-CP ./Cera Cat Part No: F1014451 |
| 61 | S&F in repair pillar tap cast copper alloy chromium plated, fancy type with capstan heads,screwed down high pressure, with or without letters Hot or Cold with long screwed shank and fly nuts, screwed for iron pipe 15 mm bore dia complete all as specified and as directed. |
| 62 | S&F in repair cast copper alloy chromium plated Angular cock for 15 mm dia bore iron pipe with wall flange complete all as specified as directed.Make : Make: Jaquar, Cat Part No: KUP-CHR-350553PM/ Cera, Cat Part No: F-1014201/ Kohler, Cat Part No: K-80154IN-4AV-CP. |
| 63 | S&F in repair Bip tap long body cast copper alloy chromium plated screwed down high pressure with crutch or butterfly handle screwed for iron pipe of 15mm bore dia complete all as specified and as directed. Make : Jaquar, Cat Part No: KUP-CHR-35037/ Cera, Cat Part No: F-1014152/ Kohler, Cat Part No: K-16093IN-4-CP. |
| 64 | S&F in repair Soap dish, of CP brass body and rectangular in shape, fixed to plugs with chromium plated brass screws complete all as specified and as directed.Make : Jaquar, Cat part No AKP-CHR-35731P/Cera, Cat Part No: F-5012116CH/ Kohler, Cat Part No: K-25069IN-CP. |
| 65 | S&F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, dual flushing system including fixing brackets and 32 mm bore PVC flush pipe etc complete all as specified and directed. |
| 66 | S&F in repair Hand jet health faucet 15 mm bore with CP flexible tube 1.2m and all connected fittings complete all as specified and as directed. Make: Jaquar, Cat part No ALD-CHR-565GA/ Cera, Cat Part No:F-8030116AB/ Kohler, Cat Part No: K-12927IN-CP |
| 67 | S&F in repair toilet paper holder of stainless stell fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed. Make: Jaquar, Cat part No AKP-CHR-35753PS/ Cera, Cat Part No: F-5007110/ Kohler, Cat Part No: K-5633IN-CP |
| 68 | S&F in repair 600x450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick commercial plywood and fixed to wooden, plug with chromium plated brass screws and cup washer complete as specified and as directed. |
| 69 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm complete all as specified and as directed. |
| 70 | S&F in repairs sheet glass assembly consisting of 5.5 mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 71 | S&F in repair tubular towel rail of brass Chromium plated 20mm dia, ‘D’ type 60cm long between flange complete all as specified and directed. Make: Jaquar, Cat part No CPA-CHR-1111/Cera, Cat Part No: F-5013104CH/ Kohler, Cat Part No: K-25065IN-CP |
| 72 | S&F in repair towel rack of 600mm long with lower hangers of approved make complete all as specified and directed. Make : Jaquar, Cat part No CPA-CHR-1181FH/Cera, Cat Part No: F-5012101CH/ Kohler, Cat Part No: K-25066IN-CP |
| 73 | S&F 75mm bore PVC (SWR) pipe single socket in any length with rubber ring joints laid in trenches or fixed to wall including necessary clamps etc including dismantling old pipes complete all as specified and directed. |
| 74 | S&F in repairs 110mm bore PVC (SWR) pipe single socket in any length with rubber ring joints fixed to walls or laid in trenches including necessary clamps etc including dismantling old pipes complete all as specified and directed. |
| 75 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and directed. |
| 76 | S&F in repair PVC (SWR) floor trap plain with S S grating including jointing with solvent cement dia of out let 75 mm complete all as specified and directed. |
| 77 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and directed. |
| 78 | S&F PVC (SWR), vent cowl 110 mm bore complete all as specified and directed. |
| 79 | S&F in repairs Grating doom 100mm dia with or without hole of stainless steel (Minimum weight 25gms) complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 80 | S&F in repairs Grating doom 100mm dia with or without hole of stainless steel (Minimum weight 25gms) complete all as specified and as directed. Please Enable Macros to View BoQ information |
