|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each complete all as specified and directed. |
| 2 | Old unserviceable chowkats or frames with shutters (without taking off shutter from the frames) Exc 1.5 sqm but n exc. 4 sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description exc 1sqm but n exc. 2 sqm each complete all as specified and directed. |
| 4 | S & F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed. |
| 5 | S & F Pressed steel frames of size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc and providing one shop coat of primer and tarring back side of frame, complete all as specified and directed. |
| 6 | S & F solid PVC door frames of sizes 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified and directed. |
| 7 | S & F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top and bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frameweld/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement in the frame at site as per specification. complete all as specified and directed. |
| 8 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetry windows & other Frames/ Chowkhat of size 45 x 70 mm fixed in position with MS hold fast/ lugs/SS dash fasteners of required size and length complete all as specified and directed.Note - (i) The WPC shall comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms)(ii) The frame shall fabricated with mitre joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws(iii) The WPC shall have minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant(iv) The cost of M.S. hold fast/ lugs or SS dash fasteners shall deemed included in quoted unit rate. Each frame shall be fixed with min 06x holdfasts/ faster's. |
| 9 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of GE. complete all as specified and directed. |
| 10 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk), and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of GE. complete all as specified and directed. |
| 11 | S&F 35 mm thick factory made 2nd class hard wood rail and style plain framed, panelled shutter with lock rail and panel of 9mm B W P commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS 1003 (part 1) kin seasoned and chemically pressure treated complete all as specified and directed. |
| 12 | S&F 35 mm thick 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed. |
| 13 | M & L Preparation of new wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed. |
| 14 | M & L Plain cement concrete (Nominal Mix), type B-0,1:2:4 (using 12.5mm graded aggregates) as in for cills, hold fast and filling of chowkats etc. complete all as specified and directed. |
| 15 | S&F box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thick MS tube factory made with double side shutters wire gauzed shutters & glass glazed shutter(wire and glass panes shall be measured and paid separately) with side hung shutters with steel handles and steel peg stay doytaled at welded incl 2 Nos tower bolts 150 mm long for each leaf and 8 mm square bar grills at spacing as shown on drg welded to FI frame work,incl other fittings, hinges, handles tarred hold fast PCC blocks, etc. complete all as specified and directed. |
| 16 | M&L Preparation of new steel surfaces of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint, complete all as specified and directed. |
| 17 | S&F 100mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21. complete all as specified and directed. |
| 18 | S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed. |
| 19 | S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm (ISI marked) complete all as specified and directed. |
| 20 | S&F aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed (ISI marked) complete all as specified and directed. |
| 21 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames/steel or stone, concrete or brick surrounds, complete all as specified and directed. |
| 22 | S&F 3 mm thick Sheet glass, ordinary quality, in squares n exc. 0.5 sqm each pane (upto G+2 floor height) complete all as specified and directed. |
| 23 | S&F, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 24 | S&F in repair, Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 25 | S&F Powder Anodised aluminium door/window shutter of Aluminium powder coating 50 micron and aluminium section weighing 0.55 kg/m including necessary joinong cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, door stopper, anodised aluminium anap beading screws etc complete all as specified and directed. |
| 26 | S&F Anodised aluminium powder coated of any colour frame for doors, windows, ventilators Aluminium powder coating 50 micron with one or more rebates including joining cleat for fixing etc. complete all as specified and directed. |
| 27 | S&F 4 mm thick Sheet glass, ordinary quality in squares exc 0.5 sqm each pane complete all as specified and directed. |
| 28 | Dismantling timber boarding, any description, fixed in any position with nails complete all as specified and directed. |
| 29 | S & F 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet for cupboard/Kitchen cabinet shutters and frames having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/cum and weight of sheet of 1 sqm should be 11 Kg (+/-5%) manufactured by ISO 9001-2015 certified company, the sheet should be 100 % water proof , termite proof, fire retardant, manufactured by single layer extrusion process with excellent screw complete all as specified and directed. |
| 30 | S&F 2nd class HW plain fillets, square / rectangular, wrought face of sectional area exc 13 & n.exc 25 Sqcm, securing with screw complete all as specified and directed. |
| 31 | S & F Continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 30 mm complete all as specified and directed. |
| 32 | S & F 100mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws. complete all as specified and directed. |
| 33 | Dismantling of wall & ceiling boards (fiber pulp insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed. |
| 34 | Providing and fixing tied false ceiling of size 595 x 595mm in true horizontal level suspended on interlocking gvpric metal grid of hot dipped galvanised steel section (galvanized @ 120 gsm/sqm, both side inclusive) consisting of 3600mm long main 'T' runner size 24x38mm and 0.30mm thick, 1200mm long cross 'T' of size 24 x 25mm and 0.30mm thick, 600mm secondary cross 'T' of size 24 x 25mm and 0.30mm thick, bottom exposed capping of width 24mm of all T-sections shall be of 0.25mm thick PPGI, wall angle is fixed along the perimeters of the ceiling to walls, partitions or columns etc with rawl plugs and wooden screws at 300mm centers Main 'T' runners are then suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 8mm dia and 45mm long dashfasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85x30x0.8mm spaced at max 1200mm centre to centre along main 'T' and not more than 150mm from spliced joints The last hanger at the end of each main runner should not be greater than 600mm from the adjacent wall, then 1200mm long cross 'T' is interlocked between the main 'T' at 600mm center to center to form a grid of 1200x600mm and then secondary cross 'T' of length 600mm is then interlocked at middle of the 1200x600mm grid to form grids of 600x600mm Cross tees at the ends having length more than 600mm are to be supported independently, Finally white coloured Gyproc 8mm thick Dew Drop/Granular tiles of size 595x595mm having foil on backside & PVC paper on front side wrapped around edges to be placedin grid complete all as specified and directed. |
| 35 | Dismantling timber scantlings 40 Sq cm and over in section, in any position complete all as specified and directed. |
| 36 | S&F tubular pipe for vertical post made to shape complete using ERW or induction butt welded tubes conforming to I.S. 1161 1979 grade St - 240. complete all as specified and directed. |
| 37 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 38 | S&F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an olour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 39 | M&L Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , facia and fixed with self tapping screws complete all as specified and directed. |
| 40 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 41 | S&F mild steel joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. gde Fe 410-W (Grade E-250) quality 'B'. complete all as specified and directed. |
| 42 | S&F Compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc gde Fe 410-W (Grade E-250) quality 'B'. complete all as specified and directed. |
| 43 | S&F plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes,without any attachment complete all as specified and directed. |
| 44 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. complete all as specified and directed. |
| 45 | M & L 15mm thick rendering on fair faces of brick work / stone masonry, concrete surface in cm 1:4 to be finished even and fair with out using extra cement using WPC as per manufacturing instruction. complete all as specified and directed. |
| 46 | M & L 10mm thick rendering on fair faces of brick work / stone masonry, concrete surface in cm 1:6 to be finished even and fair with out using extra cement. complete all as specified and directed. |
| 47 | M & L 5 mm thick of ceiling plaster on concrete surfaces in cm 1:3 to be finished even and fair with out using extra cement. complete all as specified and directed. |
| 48 | M & L Peparation of newly plastered or unplastered surfaces of walls and applying two coats of Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification. Two or more coats on new work ,over a coat of wall care putty 1mm complete all as specified and directed. |
| 49 | M & L Peparation of newly plastered or unplastered surfaces of walls and applying two coats of cement base paint ,complete all as specified and directed. |
| 50 | M&L Preparing newly plastered surfaces of ceillings and applying three coats of white wash. complete all as specified and directed. |
| 51 | Disconnecting existing tanks, capacity Exc. 250 & n exc 500 ltrs setting aside (or lowering if required) for repairs, cleaning, etc. including cleaning and hoisting if required reconnecting and re fixing in position Note cleaning repairing measured separately. complete all as specified and directed. |
| 52 | S&F 500 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling of water tank complete all as specified and directed. |
| 53 | S&F 1000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 25 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe including dismantling of water tank complete all as specified and directed. |
| 54 | Taking up or down 15mm dia steel tubing and connections for pipe complete all as specified and directed. |
| 55 | Taking up or down 20 mm dia steel tubing and connections for pipe complete all as specified and directed. |
| 56 | S&F 15mm dia GI water tube medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specified and directed |
| 57 | S&F 20mm dia GI water tube medium grade with all fittings and fixed complete to walls and ceilling or laid in floors all as specified and directed |
| 58 | Cutting chase, pinning in making good to faceing of brick masanry walls where required and pointing in cement mortar 1:3 to ends or edges of landing, and cutting chase for concealed water tubing or concealed conduit wiring etc and making good cutting exc 10cm but n exc 20cm. complete all as specified and directed. |
| 59 | S&F in repair 20 mm/Gun metal Gate valves fitted for iron pipe complete all as specified and directed. |
| 60 | Demolition of stone/brick/concrete block masonry built in Cement mortar complete all as specified and directed. |
| 61 | M & L brick work with sub class -B bricks, straight or curved on plain exc 6mtr mean radius built in CM 1:6. complete all as specified and directed. |
| 62 | M&L for walling of RR, uncoursed, well bonded bedded & solidly hearted built in cement mortar 1:6 complete all as specified and directed. |
| 63 | M&L for walling of RR, uncoursed, well bonded bedded & solidly hearted built in cement mortar 1:6 Except stone Complete all as specified and directed. |
| 64 | Demolition of cement concrete (Unreinforced) in ground floor and pavings n exc 15cm thick ness (below or above ground level). complete all as specified and directed. |
| 65 | Dismantling floor, hearth wall tiling incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish off the premises. complete all as specified and directed. |
| 66 | S&F for Glazed white/coloured ceramic tiles in vertical surface 350x 250x 7mm/ 450x 350x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting / dado etc set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 67 | M&L for Non skid, joint free (edge cut) white ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:4, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete all as specified and directed. |
| 68 | M&L for Non skid, joint free (edge cut) white/coloured ceramic tiles 7 to 8 mm thick (Square / rectangular) polished area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm as in floors etc laid over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6, set and jointed in neat cement slurry and pointed with coloured cement to match the tiles complete. complete all as specified and directed. |
| 69 | M&L for cement concrete type B-0, 1:2:4 (12.5mm graded stone aggregate) 25mm thick as in leveling course of flooring & roof complete all as specified and directed. |
| 70 | M&L 18 to 20mm thick granite (of any type) tiles, bedded and jointed with grey cement slurry and pointed with white cement (1:2) with admixture of pigment to match the shade of granite stone incl grinding and polishing complete over 15mm thick screed bed in CM 1:6, complete all as spfd and directed. |
| 71 | M&L 75 mm thick, PCC type C-2, 1:3:6 (using 40mm graded crushed stone aggregates) as in plinth protection/ footpath finished even and smooth without using extra cement, complete all as specified and directed. |
| 72 | M&L coloured parking tiles size 400mm x 400mm x 12mm laid in floor or wall over 15mm screed bed in CM 1:4 with grey cement and pigment, any shape and size complete all as specified and directed. |
| 73 | S&F in repair CP bib taps 15mm bore cast copper alloy with crutch or butterfly handle, screwed for iron pipe. complete all as specified and directed. |
| 74 | S&F in repair CP Pillar taps 15 mm bore cast alloy with capasten head screwed down high pressure with without lettered Hot or Cold with long screwed shanks and fly-nutsscrewed for iron pipe and fixed. complete all as specified and directed. |
| 75 | S&F in repair CP stop valve/cock 15 mm bore cast copper alloy with screwed down high pressure, with crutch or butterfly handle screwed from both ends for iron pipe or for unions complete all as specified and directed. |
| 76 | S&F in repair Vitreous China wash down European water closet pan (pedestal pattern), white connection to trap 'P' or 'S' and flush pipe etc seat cover and making good to disturbed surfaces of floor by filling with PCC 1:4:8 type D-2 to match with existing including taking down the existing old one complete all as specified and directed. |
| 77 | S&F in repair Vitreous China squatting pan water closet orissa pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern ) including PVS (SWR) 'S' trap, provn of lime concrete and jointing to flush pipe (fixed in repair), complete all as specified and directed. |
| 78 | M&L for Cleaning and removing all scale and dirt, etc, from tanks, Exc 250 & n exc 500 and from mouths of circulating pipes, etc, incl marking for date of cleaning of tank with paint. complete all as specified and directed. |
| 79 | S&F in repairs 10 Liter capacity PVC symphonic action type flushing cistern (ISI Marked) low level with inlet ball valve, float and handle & PVC flush pipe fixed in position and connecting complete all as specified and directed. |
| 80 | S&F in repair One Piece EWC (of any colour as directed) of size (640x350x720mm) with slim soft seat cover and Twin flush, fittings , P trap complete all as specified and directed |
| 81 | S&F in repair Health faucet (ABS Body) (mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 82 | S&F in repair oval (of any colour as directed) counter wash basin of size 560 x 470 x205mm incl CP coupling and waste pipe complete all as specified and directed. |
| 83 | S&F in repair Vitreous china, wash hand basin with pedestal (white) of size 550mmx400mm including brass CP waste coupling 32mm dia with long screwed shank and fly nuts, PVC medium grade 32mm dia waste pipe, chain and plug, porcelain stopper , PVC connection 15mm dia, 450mm long with brass CP nuts and washers at both ends (fixed in repair), complete all as specified and directed. |
| 84 | Dismantling of PVC drain pipes of internal dia 75/100mm, jointed in cement mortar and taking out of trenches/fixed to wall including all fittings complete all as specified and directed. |
| 85 | S&F PVC (SWR) 110mm bore of pipe single socketed in any length with rubber ring joints, fixed to walls, ceiling, floors etc complete all as specified and directed. |
| 86 | S&F PVC (SWR) 75mm bore of pipe single socketed in any length with rubber ring joints, fixed to walls, ceiling, floors etc complete all as specified and directed. |
| 87 | S&F PVC (SWR) 110mm bore bends complete all as specified and directed. |
| 88 | S&F PVC (SWR) 75mm bore bends complete all as specified and directed. |
| 89 | S&F PVC (SWR) 110mm bore junction single, (single 'T') equal or unequal complete all as specified and directed. |
| 90 | S&F PVC (SWR) 75mm bore junction single, (single T) equal or unequal complete all as specified and directed. |
| 91 | S&F in repair center hole Brass chromium plated wall mixture for mixing hot and cold water , screwed down for iron pipe for 15mm dia bore pipe, complete all as specified and directed. |
| 92 | S&F in repairs Brass CP mixer 15mm bore (for centre hole WHB and wall type) for mixing hot & cold water screwed down for iron pipe and fixed. complete all as specified and directed. |
| 93 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent 75mm bore complete all as specified and directed. |
| 94 | S&F PVC (SWR) floor trap plain with grating including jointing with solvent 100/110 mm bore complete all as specified and directed. |
| 95 | S&F in repair Plastic water closet seat cover (Anglo Indian Type), white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device (fixed in repair), complete all as specified and directed. |
| 96 | S&F in repair Brass chromium plated shower rose 125mm size. complete all as specified and directed. |
| 97 | Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 98 | S&F CPVC 20/15mm Brass Elbow complete all as specified and directed. |
| 99 | S&F CPVC 20/15mm Brass Tee complete all as specified and directed. |
| 100 | S&F CPVC 20/15mm Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and directed. |
| 101 | S&F CPVC 20/15mm Female Brass Threaded Adaptor (FTA/FBTA) complete all as specified and directed. |
| 102 | S&F CPVC 20/15mm UNION complete all as specified and directed. |
| 103 | S&F CPVC 20mm Tank Adapter complete all as specified and directed. |
| 104 | Taking down existing water proofing treatment including cement plaster and cleaning with wire brushes roughening the surface and hacking out dirt, where directed and disposal of rubbish n.exc 50m distance from the starting point as directed by GE complete all as specified and directed. |
| 105 | M&L for High performance two component brushable elastomeric polyurea waterproofing coating cold applied with brush/roller smartcare damp proof xtreme/ weather pro topshield elastomeric/ultraseal BA or approved equivalent on any horizontal or vertical surface liquid membrane with proof xtreme/ weather pro topshield elastomeric/ultraseal BA or approved equivalent on any horizontal or vertical surface liquid membrane with white in colour with an elongation of min 200% for vertical & min 300 % for horizontal surfaces and tensile strength of 1.5 N/mm2 @ DFT 1mm as per ASTM D 2370, min. 55% Solid content, shore A Hardness of min 70 ,The system includes final base prepration,using polymer/ epoxy application@200-250gms/sqm depending upon the surface porosity & crack bridging ability 3.50mm horizontal & 1.2mm vertical and applying Smartcare Damp proof xtreme / Home Shield Ultraseal BA or approved equivalent in two coats at not less than 0.93 Sqm/ltr in horizontal & 2.79 3.25 Sqm/ltr in vertical surfaces , complete as per manufacturer specifications .Make. Asian paints, Berger, Ultratech or equivalent. complete all as specified and directed. |
| 106 | M & L 15 mm thick rendering on fair faces of concrete surface is in cm 1:3 to be finished even and smooth with out using extra cement under roof treatment. complete all as specified and directed. |
| 107 | S&F in repairs 25 mm drapery rod Stainless Steel with both side brackets and ornamental accessories . Complete all as specified and as directed. |
| 108 | S&F sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets brass CP waste coupling 32mm dia with long screwed shank and fly nuts PVC medium grade 32mm dia waste pipe and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm. complete all as specified and directed. |
| 109 | Repair to Aluminum door/windows replacing worn out members/panel/glass pane/rubber gasket, securing all members and make it functional complete all as directed. complete all as specified and directed. |
| 110 | Repair to rolling shutter by greasing the members, replacing ball bearing, spring, straighting guide channels and make it functional as directed. complete all as specified and directed. |
| 111 | Repair/securing of grid ceiling any description incl tightening of members and repair/replacement of suspenders where required and replacement of any member of any description sheet to match with existing complete all as specified and directed. |
| 112 | S&F in repair Heavy Duty Plastic collapsible waste pipe. complete all as specified and directed. |
| 113 | S&F in repair PVC connections 15mm with PTMT nuts of length 450mm. complete all as specified and directed. |
| 114 | Repair/securing of CGI/PGI/ prepainted galvalume sheets of any description and of any height with 'J' or 'L' hooks or machine screw as required as directed complete all as specified and directed. |
| 115 | S&F in repair (incl taking down old ) PVC wall panelling hollow type super heavy duty quality minimum 5mm thick ,printed PVC sheet used instead of plain coloured sheet inclusive of solvent cement/screws/nails, fillets for edges/corner and fixing at site on wall or on PVC frames where required as per specifications and drgs and directed by GE complete all as specified and directed. |
| 116 | M&L for removing/cutting trees, vegetation, digging out roots from concrete or brick wall filling holes on building (Block of 4/8 qtrs) wall/ roof/ chajja/ water tank staging area (Height up to 12mtr) etc and making good with CM 1:4 complete all as specified & directed. |
| 117 | Providing and injecting chemical emulsion for Post Construction Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 118 | Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 119 | At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified & directed. |
| 120 | Taking down carefully existing aluminum / copper point wiring (light, fan, socket or power point) complete of any description including fitting such as switches, ceiling roses, pendants, tube light fitting, ceiling fan with regulators, sockets, wooden boards, laminated sheets from sunken boxes, boards, shades light fitting etc and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surfaces complete all as specified and directed. |
| 121 | Taking down submain wiring of any size any type and in any position metalic/non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 122 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB's of any make/capacity, complete all as specified and directed. |
| 123 | M&L, concealed point wiring with PVC insulated and unsheathed electric cable 1100 volts grade single core FRLSH confirming to IS 694:2010 having multi stranded copper conductor of 1.5 Sqmm nominal cross sectional area (ISI marked with valid CML No) drawn in and including non metallic rigid PVC Casing capping medium grade( ISI marked with valid CML No) not less than 20 mm wide with all fitting and fixing accessories and 1.5 Sqmm FRLSH PVC insulated unsheathed multistranded copper conductor cable as continuous earth conductor, connected to common earth dolly by providing suitable lugs with & including pressed steel/ PVC sunken terminal boxes factory made for mounting switch, regulators etc with and including 2.8 mm thick plastic laminated sheet cover (white) ISI marked, fixed with screws and cup washers for mounting switches. sockets etc complete for the following:- |
| 124 | One light point controlled by one switch. |
| 125 | One Ceiling fan point controlled by one switch. |
| 126 | One Exhaust fan/ wall mounted fan point controlled by one switch. |
| 127 | One 5 pin multipurpose socket out let 5/6 Amps on the same board with other switch. |
| 128 | One 3 pin/5 pin switch socket outlet, 5 Amps on independent board. |
| 129 | Description all as per item No 123 above but point wiring with 2.5 sqmm FRLSH confirming to IS 694:2010, multi strand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 2.5 sqmm FRLSH PVC insulated multi strand copper conductor cable as continous earth wire. |
| 130 | S&F switch piano, PVC/Polycarbonate, flush button single pole one way 5 Amp complete all as specified and directed. |
| 131 | S&F socket out let, multi-purpose, PVC/Polycarbonate, 2 in 1 5 pin, 5 Amp complete all as specified and directed. |
| 132 | S&F switch piano, PVC/Polycarbonate, flush button single pole one way 15 Amp complete all as specified and directed. |
| 133 | S&F socket out let multi-purpose PVC/Polycarbonate, flush type, 2 in 1 6 Pin 5/15 amps complete all as specified and directed. |
| 134 | S&F electronic step rotary type fan regulator of two module capacity 80 to 100 Watt, 240 volts, AC 50Hz complete all as specified and directed. |
| 135 | S&F ceiling rose, PVC/Polycarbonate, surface Bakelite 63.5 mm dia three terminal complete all as specified and directed. |
| 136 | S&F Decorative ultra slim LED Tube light fitting of LED with extruded polycarbonate, environmental friendly energy efficient ready to use, 10/12 watt, 2 feet 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multi stranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion complete all as specified and directed. |
| 137 | S&F Decorative ultra slim LED Tube light fitting of LED with extruded polycarbonate, environmental friendly energy efficient ready to use, 20 watt, 4 feet 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multi stranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion ,complete all as specified and directed. Please Enable Macros to View BoQ information |
| 138 | S&F Decorative ultra slim LED Tube light fitting of LED with extruded polycarbonate, environmental friendly energy efficient ready to use, 20 watt, 4 feet 6500K fitting, including reqd length of not less than 1.0 Sqmm PVC multi stranded BIS marked 03/02 core copper conductor for electrical connection from ceiling rose to connector of LED fitting including testing on completion ,complete all as specified and directed. Please Enable Macros to View BoQ information |
